Answer:
0.2 mol MgCl₂
Explanation:
ΔT = Kb . m . i
ΔT = Boiling T° of solution - Boiling T° of pure solvent
Kb is a constant. For water is 0.52 °C/m
m = molality (moles of solute in 1kg of solvent)
i = numbers of ions dissolved.
That's all the elements for the formula to determine the elevation of boiling point.
We assume, that molality will be at least the same for salts with 0.1 moles and 0.2 moles. For 0.1 mol :
1L of water contains 1000g of it, so we can also say that 1kg of water is contained in 1 L of water. Remember that density is 1g/mL or 1kg/L
So concentrations for 0.1 moles are, 0.1 mol/kg and for 0.2moles, 0.2 mol/kg. Let's dissociate the salts to determine i:
KI → K⁺ + Cl⁻ i = 2
MgCl₂ → Mg²⁺ + 2Cl⁻ i = 3
The highest difference will be at the 0.2 moles of MgCl₂, so that will be the sample that produces a solution with the highest boiling point.
Boiling T° of solution = 0.52 °C/m . 0.1m . 2 + 100°C = 100.10°C
Boiling T° of solution = 0.52 °C/m . 0.2m . 2 + 100°C = 100.20°C
Boiling T° of solution = 0.52 °C/m . 0.1m . 3 + 100°C = 100.15°C
Boiling T° of solution = 0.52 °C/m . 0.2m . 3 + 100°C = 100.31°C
Buoyancy, density, ductility and solubility describe the ________ of matter
Answer:
the answer is physical properties
Cytokinesis happens differently for plant and animal cells. Both separate cytoplasm between two new daughter cells. However, which type of cell cytokinesis looks like a balloon being separated by a string being pulled tightly between them?
Question 4 options:
Plant Cell cytokinesis
Animal Cell Cytokinesis
Both
Neither
Answer:
Animal Cell Cytokinesis
Explanation:
Answer: Animal cell
Explanation:) It refers to the process of cell division, which takes place during mitosis, is known as cytokinesis.
The process of cytokinesis is different for animal cell and plant cell.
Where, in case of plant cell, a separation, known as cell plate is formed along the center of the parent cell, which is responsible for the separation of the cells.
Whereas, in case of animal cell, the plasma membrane contracts itself along the center, until the two daughter cells are separated from each other.
Hence, from the given information of the question,
The correct answer is animal cell.
How would you describe the size of our sun compared to a red dwarf and a supergiant?
The sun is the same size as a red dwarf.
The sun is the same size as a supergiant.
The sun is smaller than the red dwarf and the supergiant.
O The sun is larger than a red dwarf but smaller than a supergiant.
Answer:
D is the answer
Explanation:
what is the difference b/w combustion and synthesis reaction ?explain with example
Answer:
A synthesis reaction occurs when two or more reactants combine to form a single product in a double replacement reaction two compounds exchange elements. Combustion reaction occurs when a substance reacts quickly with oxygen combustion is commonly called burning. Example'- for synthesis reaction is iron+ oxygen —≥ water . Example:- for combustion reaction is often gaseous products.
may be this was ur answer I hope it might help u
At what temperature would a 1.30 m NaCl solution freeze, given that the van't Hoff factor for NaCl is 1.9? Kf for water is 1.86 ∘C/m .
Answer:
-4.59°C
Explanation:
Let's see the formula for freezing point depression.
ΔT = Kf . m . i
ΔT = Freezing T° of pure solvent - Freezing T° of solution
Kf = Freezing constant. For water if 1.86°C/m
m = molality (moles of solute in 1kg of solvent)
i = Van't Hoff factor.
0°C - Freezing T° of solution = 1.86°C /m . 1.30m . 1.9
Freezing T° of solution = - (1.86°C /m . 1.30m . 1.9)
Freezing T° of solution = - (1.86°C/m . 1.30m . 1.9) → -4.59°C
NaCl → Na⁺ + Cl⁻
What is the definition of an Arrhenius acid?
Answer:
increases [H+]
Explanation:
How many bases of RNA represent an amino acid?
Answer:
three bases
Genetic experiments showed that an amino acid is in fact encoded by a group of three bases, or codon.
Explanation:
Hope this helps
In the given question, three bases of RNA represent an amino acid.
RNA (ribonucleic acid) is a molecule that plays an important role in protein synthesis. It carries genetic information from DNA to ribosomes, where it is used to direct the assembly of amino acids into proteins.
The genetic code is the set of rules by which the sequence of nucleotides in DNA or RNA is translated into the sequence of amino acids in a protein. The code is based on the sequence of three nucleotides, known as a codon, which specifies a particular amino acid.There are 64 possible codons, but only 20 amino acids that are used to build proteins. This means that some amino acids are specified by more than one codon. For example, the amino acid leucine can be specified by six different codons: UUA, UUG, CUU, CUC, CUA, and CUG.Therefore, three RNA bases represent an amino acid.
Learn more about RNA here:
https://brainly.com/question/32800505
#SPJ6
Write the correct formula for each compound named below. Show the from which it is formed.
Answer:
Explanation:
Sodium Chloride = Na⁺ + Cl⁻ = NaCl
Lithium bromide = Li⁺ + Br⁻ = LiBr
Magnesium fluoride = Mg ⁺² + F⁻ = Mg₂F.
Potassium Oxide = K⁺ + O⁻² = K₂O
Calcium sulphide = Ca⁺² + S⁻² = CaS
Aluminum Iodide = Al⁺³ + I⁻ = Al I₃
Barium bromide = Ba⁺² + Br⁻ = BaBr₂
Aluminum sulphide = Al⁺³ + S⁻ = Al₂S₃
Calcium Phosphide = Ca⁺² + P⁻³ = Ca₃P₂
Lithium Nitride = Li⁺ + N⁻³ = Li₃N
Magnesium Oxide = Mg⁺² + O⁻² = MgO
Aluminum Fluoride = Al⁺³ + F⁻ = AlF₃
Lithium Oxide = Li⁺ + O⁻² = Li₂O
Beryllium iodide = Be⁺² + I⁻ = BeI₂
what is one property that is different between water and oil? *
12.
An object with a mass of 3 kg has a momentum of 75 kg•m/s. What is the velocity?
Answer:
the velocity is 25 m/s
Explanation:
The computation of the velocity is shown below:
As we know that
Magnitude of Momentum = (mass) × (speed)
75 kg. m/s = 3 kg × speed
So, the speed is
= 75 ÷ 3
= 25 m/s
hence, the velocity is 25 m/s
Where could you find hydrocarbon chains?
Answer: Most Hydrocarbon chains are found in petroleum, coal, and natural gas. First of all, a hydrocarbon chain is a molecule that consist of entirely hydrogen and carbon.
Explanation: There are many types of hydrocarbon chains, which can be found in alkanes, alkynes, arenes, alkenes, and cycloalkanes. Natural rubber for instance is a hydrocarbon that primarily consists of alternating single and double bonded carbons.
Reproductions is the process by which organisms CANNOT make one or more organisms
True
False
If NaOH is added to 0.010 M Al3+, which will be the predominant species at equilibrium: Al(OH)3 or Al(OH)- 4 ? The pH of the solution is 14.00. [Kf for Al(OH) - 4 = 2.0 1033.]
Answer:
Al(OH)- 4,
Explanation:
NaOH added to 0.010 M Al3+
The predominant species at equilibrium will be = Al(OH)- 4, and this because sodium hydroxide ( NaOH ) is a base will readily form a stable complex ion with aluminum ion like ( Al( OH ) - 4 . also the higher the Kf value the more stable the complex ion becomes and the more soluble Al(OH)3 becomes
hence the predominant species at equilibrium is : Al(OH)- 4,
What is the formula for silicon tetrabromide?
Answer:
SiBr4
Explanation:
Answer:
SiBr4
hope this helps!
What is an ecosystem. A.It is a single plant and a single animal that live in given area B. it is a community of plants, animals and their physical surrounding. C it is the members of the same species in an area. D it is one species that lives in a given area GIVE BRANLIYST
Answer:
B. it is a community of plants,animals and there physical surrounding.
How many grams of potassium chloride (KCl) can be produced from 180.6 g of chlorine (Cl2)?
Answer:
379.79 g of KCl
Explanation:
The balanced equation for the reaction is given below:
Cl₂ + 2KBr —> Br₂ + 2KCl
Next, we shall determine the mass of Cl₂ that reacted and the mass of KCl produced from the balanced equation. This can be obtained as follow:
Molar mass of Cl₂ = 70.90 g/mol
Mass of Cl₂ from the balanced equation = 1 × 70.90 = 70.90 g
Molar mass of KCl = 74.55 g/mol
Mass of KCl from the balanced equation = 2 × 74.55 = 149.1 g
SUMMARY:
From the balanced equation above,
70.90 g of Cl₂ reacted to produce 149.1 g of KCl.
Finally, we shall determine the mass of KCl produced by the reaction of 180.6 g of Cl₂. This can be obtained as follow:
From the balanced equation above,
70.90 g of Cl₂ reacted to produce 149.1 g of KCl.
Therefore, 180.6 g of Cl₂ will react to produce = (180.6 × 149.1)/70.90 = 379.79 g of KCl.
Thus, 379.79 g of KCl were obtained from the reaction.
How many liters of nitrogen would be needed to react with 93.0 liters of hydrogen using the balance
equation below:
N2 + 3H2 → 2NH3
Answer:
7NH
Explanation:
Which is an energy source for a coyote?
Answer:
The coyotes are both a plant and meat eaters whose common food is 90% of their diet, is small animals. Rabbits, hares, birds, snakes, fish, crustaceans, and insects are all on the menu.
hopefully this is right :))
Answer:
sun
Explanation:
enzyme, fat, sugar. Classify them into the group of organic compounds to which they belong to
Answer:
Enzyme: speed up chemical reactions
- protein
Fat: give us energy
- lipid
Sugar: give us energy
- carbohydrate
GIVE BRAINLEST PLEASE
How many moles of a gas would occupy 22.4 Liters at 273 K and 1 atm?
Read bottom comment
Answer:
The following relationship makes this possible: 1 mole of any gas at standard temperature and pressure (273 K and 1 atm) occupies a volume of 22.4 L.
Explanation:
1 mole of any gas would occupy 22.4L of gas at standard temperature and pressure (STP) i.e at 273K and 1 atm.
The STP conditions refer to the standard temperature and pressure. Pressure values at 1 atmosphere and temperature at 0 ° C (or 273 K) are used and are reference values for gases. And in these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.
An ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T). The relationship between them constitutes the ideal gas law, an equation that relates the three variables if the amount of substance, number of moles n, remains constant and where R is the molar constant of the gases:
P V = n R T
To know more about moles of gas here
https://brainly.com/question/32658876
#SPJ2
PLSSS HELP MEEE!! I don’t get this anyone help me!!
Answer:
B
Explanation:
The other answers dont make any sense.
What do weather scientists
do?
What are they called?
Can someone help me?
Answer:
b
Explanation:
I don't know that is what the outcome is I think
14. Which type of bond is formed when an ammonia
molecule accepts a proton?
1) electrovalent
2) ionic
3) coordinate covalent
4) metallic
Answer: dative covalent bond
Explanation: one hydrogen ion is transferred from HCl to the lone pair on NH3 . This particular hydrogen only has its nucleus transferred—its electrons remain with chlorine. So, the bond between this particular hydrogen atom and the central nitrogen is a dative covalent bond.
If 100 ml of a 0.5 M HCI Solution is diluted with water to 1000ml, what is the new concetration?
Answer:
[tex]0.05\ \text{M HCl}[/tex]
Explanation:
[tex]V_1[/tex] = Initial volume = 100 mL
[tex]V_2[/tex] = Final volume = 1000 mL
[tex]M_1[/tex] = Initial concentration = 0.5 M
[tex]M_2[/tex] = Final concentration
We have the relation
[tex]\dfrac{M_1}{M_2}=\dfrac{V_2}{V_1}\\\Rightarrow M_2=M_1\dfrac{V_1}{V_2}\\\Rightarrow M_2=0.5\times \dfrac{100}{1000}\\\Rightarrow M_2=0.05\ \text{M HCl}[/tex]
The new concentration is [tex]0.05\ \text{M HCl}[/tex].
Which list is in order from biggest to smallest
Answer:
we cant see the list
Explanation:
Determine the number of molecules present in 1.53 mol of carbon monoxide
Answer:
hi
Explanation:
this is my first time on this app so what do i do
What happens to that atom of magnesium-24 if it GAINS a PROTON
Answer:
Adding or removing protons from the nucleus changes the charge of the nucleus and changes that atom's atomic number. So, adding or removing protons from the nucleus changes what element that atom is! For example, adding a proton to the nucleus of an atom of hydrogen creates an atom of helium
Explanation:
Assignment Prompt
In this assignment, you will research the relationship between different types of energy when energy is
being transformed. You will present your findings in the form of bar graphs or pie charts that show the
forms of energy at different times in the process. You will then create a poster to display your findings.
Your poster should include a title, a brief description of the energy transformation you are showing, your
graphs, and works cited.
Assignment Instructions
Step 1: Gather materials and necessary information.
a) You will choose an energy transformation to show. Some of the ones you have learned about
include those that occur in a burning bonfire and a wind turbine.
• Do research to find out about an energy transformation that affects your daily life.
• Find out what the starting types of energy are and what the ending types of energy are.
• Decide how many steps in the process your poster will show.
• Create bar graphs or pie charts to show the relationship between the different types of
energy at different steps in the transformation process.
b) Be sure to keep a list of your references so you can cite them later.
Step 2: Decide on a title.
a) Begin by deciding on a title for your poster and writing it neatly at the top.
b) The title should identify the energy transformation you are showing.
Step 3: Create your graphs.
a) Decide how many graphs you will need to show the energy transformation.
b) You should have at least 3 graphs so that the steps of the transformation will be clear.
c) Each graph should be clearly labeled.
d) Careful use of color on your graphs will make them easy to read and understand.
Step 4: Decide on the descriptive words to include on your poster.
a) People looking at your poster may need more information than just the title and the
graphs. Decide on how you want to present the information your viewers need.
b) Keep the information as short as possible while still including what you need. Remember that
when people look at a poster, they focus on the graphics.
Step 5: Decide on the best layout for your poster.
a) You want to incorporate your text and visuals in a way that is attractive and attention-getting.
b) Keep your graphics as large as possible.
Step 6: Put your poster together.
Step 7: Cite your sources.
a) In the lower right-hand corner of your poster, create a section titled Works Cited.
b) List the resources you used to create your poster. A simple list of website titles and
addresses (URLs) is acceptable. If you used print sources, list the title, author, publisher, city,
and date. The print for this section can be small; it needs to be readable close-up.
Step 8: Identify yourself as the creator of the poster.
a) Place your name in the lower right-hand corner of the poster.
b) On the back, write your teacher’s name and the due date for the poster.
Step 9: Evaluate your poster using this checklist.
If you can check each criterion below, you are ready to submit your presentation.
Yes No Evaluation Question
Does your poster have a title that grabs interest and tells what your subject is?
Are the graphs clearly labeled?
Are the graphs bright and colorful?
Is the text on the poster clearly written so that the viewer understands what you are trying
to show?
Is it free from misspellings?
Is your poster laid out in a way that invites people to look at it?
Have you included your name and works cited?
Is your entire poster neat and attractive?
Step 10: Revise and submit your poster.
a) If you were unable to check off all the requirements on the checklist, revise your poster
before submitting it.
b) Ask your teacher for further instructions about presenting your poster to an audience of your
peers.
Resource Suggestions
• Bar Graph
• Pie Chart
please help! you need to make a poster with any kind of paper and no drawing and if you do any drawing on the poster make it the skill of a 6th grader 100 points plus brainly if you get it right
Answer:
give other guy brainliest
Answer:El mercantilismo en Gran Bretaña consistió en la posición económica de que, para aumentar la riqueza, sus colonias serían proveedoras de materias primas y exportadoras de productos terminados. El mercantilismo provocó muchos actos de lesa humanidad, incluida la esclavitud y un sistema de comercio desequilibrado.
Explanation:
Kevin is working on a model that shows the positions of Earth, the Moon, and the Sun during the phases of the Moon. How should he position them to show a New Moon?
With Earth between the Moon and the Sun.
O With the Moon between Earth and the Sun.
With the Sun between Earth and the Moon
With the Moon perpendicular to Earth and the Sun.
Answer: With Earth between the Moon and the Sun.
Explanation: Think about how we the order of all planet including different moons.
It’s actually B
Explanation: