Question #4
4. Anthony walks to the pizza place for lunch. He walk 4 km
east, he realized he passed it and then walked 1 km west.
What distance did he cover? What was his displacement?

Answer:

1800 m/s

Explanation:

The equation is v = fλ

λ= 0.75

f = 2400 Hz

V = 2400 × 0.75

V = 1800 m/s

[ you did not give units for wavelength, I assumed it would be m/s]

Answer:

A) By applying a known force, and measuring it's acceleration.

Explanation:

This is actually something that astronauts do in space as a mathmatical exercise when calculating the mass of an object since F = m × a.

Once the force, and acceleration are applied, the only unknown is the mass which can be solved by dividing force over acceleration. This is because inertial mass is equal to gravitational mass.

Answer:

Package 1 will land at 228.0 m, package 2 will land at 308.0 m, and the distance between them is 80.0 m.

Explanation:

To find the distance at which the first package will land we need to calculate the time:

[tex] Y_{f} = Y_{0} + V_{0y}t - \frac{1}{2}gt^{2} [/tex]

Where:

Y(f) is the final position = 0

Y(0) is the initial position = 160 m

V(0y) is initial speed in "y" direction = 0

g is the gravity = 9.81 m/s²

t is the time=?                                          

[tex] 0 = 160 m + 0t - \frac{1}{2}9.81 m/s^{2}t^{2} [/tex]

[tex] t = \sqrt{\frac{2*160 m}{9.81 m/s^{2}}} = 5.7 s [/tex]

Now we can find the distance of the first package:

[tex] X_{1} = V_{0x}*t = 40.0 m/s*5.7 s = 228.0 m [/tex]

Then, after 2 seconds the distance traveled by plane is (from the initial position):

[tex] X_{p} = V_{0x}*t = 40.0 m/s*2 s = 80.0 m [/tex]

Now, the distance of the second package is:

[tex] X _{2} = X_{1} + X_{p} = 228.0 m + 80.0 m = 308.0 m [/tex]

The distance between the packages is:

[tex] X = X_{2} - X_{1} = 308.0 - 228.0 m = 80.0 m [/tex]

Therefore, package 1 will land at 228.0 m, package 2 will land at 308.0 m and the distance between them is 80.0 m.

I hope it helps you!

Answer:

2.59 cm

Explanation:

The torque τ on a current carrying loop of wire is given by τ = NiABsinθ where N = number of turns of loop, i = current in loop, A = area of loop and B = magnetic field.

Now, given that τ = 0.0256 Nm, i = 1.10 A, B = 1.20 T,N = 30 and since the loop is tilted 15° off the x-axis and the magnetic field points in the negative y- direction, the angle between the normal to the loop and the magnetic field is thus 90° - 15° = 75°. So, θ = 75°.

We now find the area of the loop A from

τ = NiABsinθ

A = τ/NiBsinθ

substituting the values of the variables, we have

A = 0.0256 Nm/30 × 1.10 A × 1.20 T × sin75°

A = 0.0256 Nm/38.25

A = 6.69 × 10⁻⁴ m²

Since the loop is a square, with length of side L, its area A = L² and

L = √A

= √(6.69 × 10⁻⁴ m²)

= 2.59 × 10⁻² m

converting to cm, we have

L = 2.59 × 10⁻² m × 100 cm/m

L = 2.59 cm

So, the lengths of sides of the loop is 2.59 cm

Dimensional formula of stress is same as pressure.

Answer:

Plasma, which constitutes 55% of blood fluid, is mostly water (92% by volume), and contains proteins, glucose, mineral ions, hormones, carbon dioxide (plasma being the main medium for excretory product transportation), and blood cells themselves.

Explanation:

Capillary motion is crucial for circulating water. Your body's cells would not hydrate without this flow, and crucial communication between your brain and body would slack off, hence blood contains water 92% water helps in capillary action.

Capillary action, also known as capillary effect or motion, is the process by which liquid moves through constricted areas without the aid of external forces like gravity but rather with the help of intermolecular forces that exist between the liquid and solid surface (s).

Adhesion: The attraction of two different molecules, such as the hydrogen and oxygen molecules found in water and plastic drinking straws.

Proteins, glucose, mineral ions, hormones, carbon dioxide (plasma is the principal medium for excretory product transfer), and blood cells themselves are contained in plasma, which makes up 55% of blood fluid. Plasma is mostly water (92% by volume) and contains water as well as several other substances.

Therefore, the water contains in the blood helps in capillary action.

To know more about Capillary action:

https://brainly.com/question/13228277

#SPJ2

Answer:

The boat has more buoyancy

Explanation:

Answer:

A. Loses PE and gains KE

Explanation:

Statement is incomplete. Complete statement of problem is:

1. An object from a certain height falls freely. Which of the following happens to PE  and KE when the object is half on its way down?

A. Loses PE and gains KE

B. Gains PE and loses KE

C. Loses both PE and KE

D. Gains both PE and KE​

If we neglect the effects of any conservative force, the application of the Principle of Energy Conservation is reduced to a sum of gravitational potential ([tex]U_{g}[/tex]) and translational kinetic energies, measured in joules. That is:

[tex]U_{g,1}+K_{1} =U_{g,2}+K_{2}[/tex] (Eq. 1)

Let assume that an object falls from a height [tex]h[/tex] with a speed of zero. By definitions of gravitational potential and translational kinetic energies the previous is expanded. If final height is the half of initial value, then:

[tex]m\cdot g\cdot h = 0.5\cdot m\cdot g\cdot h +K_{2}[/tex] (Eq. 1b)

[tex]K_{2} = 0.5\cdot m\cdot g\cdot h[/tex]

[tex]K_{2} = 0.5\cdot U_{g,1}[/tex]

In a nutshell, translational kinetic energy is increased at the expense of diminishing gravitational potential energy. The correct answer is A.

Answer:

μ_k = 0.851

Explanation:

We are given;

Mass of book; m_book = 4.7 kg

Horizontal force; F_horiz = 42 N

Distance; d = 0.85 m

Speed; v = 1 m/s

First of all let's find the acceleration using Newton's equation of motion;

v² = u² + 2ad

u is initial velocity and it's 0 m/s in this case.

Thus;

1² = (2 × 0.85)a

1 = 1.7a

a = 1/1.7

a = 0.5882 m/s²

Now, resolving forces along the vertical direction, we have;

W - N = 0

Thus,W = N

Where W is weight = mg and N is normal force

Thus; N = mg = 4.7 × 9.81 = 46.107 N

Now, resolving forces along the horizontal direction, we have;

F_horiz - ((μ_k)N) = ma

Where μ_k is coefficient of kinetic friction.

Thus;

42 - 46.107(μ_k) = 4.7 × 0.5882

42 - 46.107(μ_k) = 2.76454

μ_k = (42 - 2.76454)/46.107

μ_k = 0.851

Answer:

Explanation:

Accuracy can be said to mean the degree to which the particular result of a measurement, or calculation, and even possibly specification agrees or is the same with respect to the correct value or an established standard. Succinctly put, it's is how close a value is to the actual value it ought to be.

Precision on the other hand, is a change in a measurement, or calculation, and even as far as specification, much especially as represented by the number of digits that has been established. In other words, it is the proximity of two or more measurements with respect to one another.

Reproducibility occurs when a measurement(for example) is made by another person, or a different instrument is used. Yet, the same values are obtained.

They are very important in design because they account for very important part of an experiment. Neglecting these quantities means exposing an instrument to unknown danger to the factory and even the personnels.

Also, neglect in taking note of accuracy, precision and reproducibility can lead to poor data processing and even human errors.

Now, vote brainliest, will you? :)

Answer:

a)  + Q charge is inducce that compensates for the internal charge

b) There is no excess charge on the external face q_net = 0

c) E=0

Explanation:

Let's analyze the situation when a negative charge is placed inside the cavity, it repels the other negative charges, leaving the necessary positive charges to compensate for the -Q charge. The electrons that migrated to the outer part of the sphere, as it is connected to the ground, can pass to the earth and remain on the planet; therefore on the outside of the sphere the net charge remains zero.

With this analysis we can answer the specific questions

a)  + Q charge is inducce that compensates for the internal charge

b) There is no excess charge on the external face q_net = 0

c) If we create a Gaussian surface on the outside of the sphere the net charge on the inside of this sphere is zero, therefore there is no electric field, on the outside

d) If it is very reasonable and this system configuration is called a Faraday Cage

e) We cannot apply this principle to gravity since there are no particles that repel, in all cases the attractive forces.

Answer:b the arrows push against the bow string

Explanation:

The reaction force will be  Arrow's push against the bowstring.

Option b is correct.

From Newton's Third Law of  Action & Reaction, It  states that for every action  in nature there is an equal and opposite reaction.

Therefore, If an  archer shoots an arrow. The action force is the bowstring against the arrow, The reaction force will be  Arrow's push against the bowstring

Learn more:

https://brainly.com/question/19218753

Answer:

The duration  is  [tex]T  =72 \  years /tex]

Explanation:

From the question we are told that

   The  distance is  [tex]D  =  35 \ light-years = 35 *  9.46 *10^{15} = 3.311 *10^{17} \  m [/tex]

  Generally the time it would take for the message to get the the other civilization is mathematically represented as

         [tex]t =  \frac{D}{c}[/tex]

Here c  is the speed of light with the value  [tex]c =  3.08 *10^{8} \  m/s[/tex]

=>     [tex]t =  \frac{3.311 *10^{17} }{3.08 *10^{8}}[/tex]

=>     [tex]t =  1.075 *10^9 \ s[/tex]

converting to years

           [tex]t =  1.075 *10^9 *  3.17 *10^{-8} [/tex]

              [tex]t =  1.075 *10^9 *  3.17 *10^{-8} [/tex]

            [tex]t =  34 \ years [/tex]

Now the total time taken is mathematically represented as

      [tex]T  =  2*  t  +  2 + 2[/tex]

=>   [tex]T  =  2* 34  +  2 + 2[/tex]

=>   [tex]T  =72 \  years /tex]

Answer:

See the answer below

Explanation:

The optimal conditions for high biodiversity seem to be a warm temperature and wet climates.

The tropical areas of the world have the highest biodiversity and are characterized by an average annual temperature of above 18 [tex]^oC[/tex] and annual precipitation of 262 cm. The areas are referred to as the world's biodiversity hotspots.

Consequently, it follows logically that the optimal conditions for high biodiversity would be a warm temperature of above 18 [tex]^oC[/tex] and wet environment with annual precipitation of not less than 262 cm.

The variation in temperature and precipitation across biomes can thus be said to be responsible for the variation in the level of biodiversity in them.

Answer:

T₂ = 49.3°C

Explanation:

Applying law of conservation of energy to the system we get the following equation:

Energy Supplied by Resistor = Energy Absorbed by Tank + Energy Absorbed by Water

E = mC(T₂ - T₁) + m'C'(T'₂ - T'₁)

where,

E = Energy Supplied by Resistor = 100 KJ = 100000 J

m = mass of copper tank = 13 kg

C = Specific Heat of Copper = 385 J/kg.°C

T₂ = Final Temperature of Copper Tank

T₁ = Initial Temperature of Copper Tank = 27°C

T'₂ = Final Temperature of Water

T'₁ = Initial Temperature of Water = 50°C

m' = Mass of Water = 4 kg

C' = Specific Heat of Water = 4179.6 K/kg.°C

Since, the system will come to equilibrium finally. Therefor:  T'₂ = T₂

Therefore,

(100000 J) = (13 kg)(385 J/kg.°C)(T₂ - 27°C) + (4 kg)(4179.6 J/kg.°C)(T₂ - 50°C)

100000 J = (5005 J/°C)T₂ - 135135 J + (16718.4 J/°C)T₂ - 835920 J

100000 J + 135135 J + 835920 J = (21723.4 J/°C)T₂

(1071055 J)/(21723.4 J/°C) = T₂

T₂ = 49.3°C

Answer:

A group of protons and neutrons that are surrounded by electrons  I think that's the answer...

Explanation:

Answer:

2.83kg

Explanation:

Answer:

2.83kg

Explanation:

Given

initial density = 1.18 kg/m3

Final density in the tank = 4.95 kg/m3.

Let us write the mass balance first.

Change in the mass of the system=mass of the air entering the system - Mass of air out the system

Mass that entered= M2 - M1

But DENSITY= MASS/ VOLUME

Mass= volume × Density

We can expressed the mass in terms of density since density is given in the question.

Mass that entered= (volume × density)2 - ( volume × density)1

= (V ρ)2 - (V ρ)1

But V1= V2 the volume remains the same

= ( ρ2 - ρ1)v

= (4.95 kg/m3 - 1.18 kg/m3) 0.75 m3

= 3.77× 0.75

= 2.8275kg

Mass that entered= 2.83kg

therefore, mass of air that has entered the tank= 2.83kg

Answer:

No you didn't win the stuffed poodle

Explanation:

From the question we are told that

    The distance of the ramp to the hole is  d =  3 m \

     The angle of inclination is  [tex]\theta  =  10^o[/tex]

       The coefficient of static friction is [tex]\mu_s = 0.1[/tex]

     The coefficient of kinetic  friction is [tex]\mu_k = 0.08[/tex]

      The mass of the puck is  m  =  1 kg

     The velocity of the first slide  is  [tex]v_1  =  2.0 m/s[/tex]

Generally the kinetic energy at the bottom of the ramp  is equal the energy loss due to friction and this can be mathematically represented as

    [tex]\frac{1}{2} m *  v^  2 =  \mu_k * [m *  g] *  cos (theta )  *  d[/tex]

=>     [tex]\frac{1}{2}  *  v^  2 = 0.08 * 9.8 *  cos (10 )  *  3[/tex]

=>     [tex] v=  2.17 \  m/s [/tex]

Comparing the relative velocity obtained and the velocity of your first throw we can see that you didn't win the stuffed animal  

Answer:

when the electron transferred permanently to another atom

Answer:

III) [tex]d_{1}+ d_{2}=d_{t}[/tex]

Explanation:

I) coordinate (0,5) is the head for [tex]d_{1}[/tex] I will put the tail coordinate as (0,0) but it could be any other number in the x just not in the 5  with the the y being any other value.

II) coordinate (5,5) is the head for [tex]d_{2}[/tex] the tail needs to be in the head of [tex]d_{1}[/tex] being (0,5)

III) coordinates for [tex]d_{t}[/tex] is connecting the tail from [tex]d_{1}[/tex] and the head of [tex]d_{2}[/tex] making it (0,0)[tex](tail)[/tex] and (0,5)[tex](head)[/tex] and is written as [tex]d_{1}+ d_{2}=d_{t}[/tex]

(i) using coordinate grid notation to represent d₁, d₁ = 5y

(ii) using coordinate grid notation  to represent d₂, d₂ = 5x + 5y

(ii) The sum of d₁ and d₂ is written as 5x + 10y

In order to show the horizontal direction of a vector, we will place x after the magnitude of the vector.

Also, to show the vertical direction of a vector, we will place a y after the magnitude of the vector.

(i) Using coordinate grid to represent d₁ = (0, 5)

[tex]d_1 = 0(x) + 5(y)\\\\d_1 = 5y[/tex]

(ii) Using coordinate grid to represent d₂ = (5, 5)

[tex]d_2 = 5x + 5y[/tex]

(iii) The total vector is written as;

[tex]d_1 + d_2 = 5y + (5x + 5y)\\\\d_1 + d_2 = 5y + 5x + 5y\\\\d_1 + d_2 = 5x + 10y[/tex]

Learn more here: https://brainly.com/question/17212749

Answer:

i. The magnetic force of repulsion.

ii. The magnetic force of attraction.

Explanation:

A magnet is a material that has the attraction and repulsion capability. Magnets has two poles, north and south, thus would attract or repel another magnet in its neighborhood. It can either be a permanent or temporal magnet, and attracts ferrous metals.

i. In the case of two combinations where two ends are the same, it could be observed that the two ends (poles) repels each other. Thus since like poles repels, magnetic force of repulsion is felt.

ii. In the case of one combination in which the two ends are different, the two ends (poles) attract. Since unlike poles attracts, magnetic force of attraction is observed.

Answer:

102 m

Explanation:

Given that It takes a minimum distance of 48.96 m to stop a car moving at 12.0 m/s by applying the brakes (without locking the wheels). Assume that the same frictional forces apply and find the minimum stopping distance when the car is moving at 25.0 m/s.

Let the stopping distance be equal to S.

According to the definition of speed,

Speed = distance / time.

make time the subject of the formula

Time = distance / speed

then, the equivalent time is:

48.96 / 12 = S / 25

Cross multiply

12S = 48.96 x 25

12S = 1224

S = 1224 / 12

S = 102 m

Therefore, the stopping distance is 102 m

Answer:

a. resin and turpentine

Explanation:

The chemicals that diverged from trees are resin and turpentine.

Resin are produced by special cells in trees, most times we see them when a tree is damaged or cut. They are usually derived from pines and firs.

Turpentine is obtained by distilling resin.

 Turpentine has an antiseptic property that has different uses. They are used as cleansing agents and for producing sanitary materials.

Answer:

A) m[tex]_{T}[/tex] = 0.3025 * 0.0476 * 92.13 = 1.327 Ibm

B) T= 63.32°F

Explanation:

Given data:

1000 gallon tank currently contains 100.0 gallons of liquid toluene

and A gas saturated with toluene vapor at 85°F and 1 atm

A) Calculate quantity of toluene ( Ibm ) that will enter the atmosphere when the tank is filled

m[tex]_{T}[/tex] = [tex]n_{gas} * Y_{T} * M_{T}[/tex]

[tex]n_{gas}[/tex] (total mole of gas) = 0.3025 Ib-mole  ( calculated using : [tex]\frac{PV}{RT}[/tex] )

[tex]Y_{T}[/tex] (mole fraction of toluene) = 0.0476 ( calculated using [tex]\frac{P_{T} }{P}[/tex] )

M[tex]_{T}[/tex] = 92.13 Ibm/Ib-mole

therefore:  m[tex]_{T}[/tex] = 0.3025 * 0.0476 * 92.13 = 1.327 Ibm

B) using Antoine equation to solve for T

Antoine equation : [tex]log_{10} (P_{T} ) = A - \frac{B}{T+C}[/tex]

PT( partial pressure ) = 18.95 ( calculated using : [tex]y_{tb} * P[/tex] )

A = 6.95805

B = 1346.773

T = ?

C = 219.693

to calculate T make T the subject the subject of the equation

T + 219.693 = 1346.773 / 5.68044

∴ T = 17.40°C

convert T to Fahrenheit

T = 1.8 * 17.40 +32

  = 63.32°F

Answer: the work done by the force is 0

Explanation:

F (x², xy)

121 = 11²

so R = x² + y² = 11²

p = x². Q = xy

Δp/Δy = 0, ΔQ/Δx

using Green's theorem

woek = c_∫F.Δr = R_∫∫ ΔQ/Δx - Δp/Δy) ΔA

=  (x² + y² = 121)_∫∫ yΔA

now let x = rcosФ, y = rsinФ

ΔA = rΔrΔФ

so r from 0 to 11

and Ф from 0 to 2π

= 0_∫^2π   0_∫^11  rsinФ × rΔrΔФ

= 0_∫^2π SinФΔФ   0_∫^11  r²Δr

= [ -cosФ]^2π_0 [r³/3]₀¹¹ = ( -cos2π + cos0) (11³/3) = 0

therefore the work done by the force is 0

Answer:

Parietal Lobe

Explanation:

Answer:

44M 64M

Explanation: