The correct option is: e. -b-c 0 * {[-D-CO]:D.CER} b с .
What is the reason?The function can be broken up as follows;
{[-D-CO]:D.CER} :
A constant function and so the graph will be a horizontal line at height -D-CO{-b-c 0} :
A parabola that opens downward.
The vertex is at (b, -c). This parabola is negative everywhere and intersects the x-axis at x = b + c and
x = b - c.*
The point (-1, 10) is outside the interval of interest.*The point (0, O) is inside the interval of interest.
The value of the function at this point is -D-CO.*The point (1, O) is inside the interval of interest.
The value of the function at this point is -D-CO.*The sign of the function switches at x = b + c and
x = b - c.
So, there are 3 intervals to consider.(-∞, b - c) : Here the function is increasing and negative.
At the endpoint, the function equals -D-CO. (b - c, b + c) :
Here the function is decreasing and negative. The minimum value is attained at x = b. (b + c, ∞) :
Here the function is increasing and negative. At the endpoint, the function equals -D-CO.
The answer is -b-c 0 * {[-D-CO]:D.CER} b с.
To know more on Function visit:
https://brainly.com/question/30721594
#SPJ11
Which of these strategies would eliminate a varible in the system of equations 5x+3y=9 4x-3y=9 choose all that apply
To eliminate the ys in the system of equations, we need to add the equations
How to eliminate the ys in the system of equationsFrom the question, we have the following parameters that can be used in our computation:
5x + 3y = 9
4x - 3y = 9
To eliminate the ys in the system of equations, we multiply the equations by 1
So, we have
5x + 3y = 9
4x - 3y = 9
Next, we add the equations
9y = 18
Hence, the new equation is 9y = 18
Read more about equation at
brainly.com/question/148035
#SPJ1
determine whether the geometric series is convergent or divergent. 10 − 2 0.4 − 0.08
The geometric series 10, 2.04, 0.08 is divergent
How to determine whether the geometric series is convergent or divergent.From the question, we have the following parameters that can be used in our computation:
10, 2.04, 0.08
In the above sequence, we can see that
As the number of terms increasesThe sequence decreasesThis means that the common ratio is less than 1
When the common ratio of a sequence is less than 1, then the geometric series is divergent.
Hence, the geometric series is divergent
Read more about sequence at
https://brainly.com/question/30499691
#SPJ1
3 If a function is increasing, then its derivative is greater than or equal to (Cro) Ċ True or false?
The statement is true. If a function is increasing, then its derivative is greater than or equal to zero.The derivative of a function measures its rate of change.
When we talk about the increasing nature of a function, we are referring to the behavior of the function as the input values increase. A function is said to be increasing on an interval if, as the input values within that interval increase, the corresponding output values also increase.
The derivative of a function, denoted as f'(x) or dy/dx, measures the rate of change of the function at a particular point. If a function is increasing, it means that its output values are getting larger as the input values increase. Mathematically, this can be represented as f'(x) ≥ 0.
The derivative of a function gives us information about its slope or steepness at any given point. When the derivative is positive (greater than zero), it indicates that the function is increasing. When the derivative is zero, it signifies a flat region or a local maximum or minimum. However, since we are discussing the case of an increasing function, the derivative is either positive or zero.
Learn more about derivative here: https://brainly.com/question/29144258
#SPJ11
7. Find the value of the integral Jotz 32³ +2 (2- 1) (z²+9) -dz, taken counterclockwise around the circle (a) |z2| = 2; (b) |z| = 4. 8
(a)The value of the integral for |z²| = 2 is 2[tex]\pi[/tex].
(b)The value of the integral for |z| = 4 is 64[tex]\pi[/tex](32³ + 36).
What is integration?
Integration is a fundamental concept in calculus that involves finding the integral of a function. It is the reverse process of differentiation and allows us to determine the accumulated change or the total quantity represented by a function over a specific interval.
To find the value of the given integral, we will evaluate it separately for each part:
(a) |z²| = 2:
To parameterize the circle |z²| = 2, we can write z as[tex]z =\sqrt{2}e^{it}[/tex], where t is the parameter ranging from 0 to 2π. Therefore, [tex]dz =\sqrt{2}ie^{it}dt.[/tex]
Substituting the parameterization into the integral, we have:
∮(|z²| + 2(2 - 1)(z² + 9) - dz = ∮(2 + 2(2 - 1)[tex](2e^{2it}+ 9)\sqrt{2}ie^{it}dt[/tex].
Expanding and simplifying the integral, we get:
∮[tex](2 + 4(2e^{2it}+ 9)\sqrt{2}ie^{it}dt[/tex]= 2∮(1 +[tex]4e^{2it} + 36\sqrt{2}ie^{it})dt.[/tex]
Now, we integrate each term separately:
∫1 dt = t, ∫[tex]4e^{2it}dt = 2e^{2it}[/tex], ∫36[tex]\sqrt{2}ie^{it}dt = 36\sqrt{2}ie^{it}.[/tex]
Evaluating the integrals over the range 0 to 2[tex]\pi[/tex], we have:
[tex]2\pi+ 2e^{4\pi i} - 2e^{0}+ 36\sqrt{2}i(e^{2\pi i} - e^{0}).[/tex]
Simplifying further, we get: 2[tex]\pi[/tex] + 2 - 2 + 36[tex]\sqrt{2}[/tex]i(1 - 1) = 2[tex]\pi[/tex].
Therefore, the value of the integral for |z²| = 2 is 2[tex]\pi[/tex].
(b) |z| = 4:
Using a similar approach, we can parameterize the circle |z| = 4 as
[tex]z = 4e^{it}[/tex], where t ranges from 0 to 2π. Consequently, [tex]dz = 4ie^{it}dt[/tex].
Substituting the parameterization into the integral, we have: ∮(32³ + 2(2 - 1)(z² + 9) - dz = ∮(32³ + 2(2 - 1)[tex](16e^{2it}+ 9)4ie^{it}[/tex]dt.
Expanding and simplifying the integral, we get:
∮(32³ + 2(2 - 1)[tex](16e^{2it}+ 9)4ie^{it}dt[/tex] = ∮(32³ +[tex]2(32e^{2it}+ 18)4ie^{it}[/tex]dt.
Integrating each term separately, we have:
∫32³ dt = 32³t, ∫2([tex]32e^{2it}+[/tex] 18)4i[tex]e^{it}[/tex]dt = 8i(32[tex]e^{2it}[/tex] + 18)t.
Evaluating the integrals over the range 0 to 2π, we have:
32³(2[tex]\pi[/tex] - 0) + 8i(32[tex]e^{4\pi i}[/tex]+ 18)(2[tex]\pi[/tex] - 0).
Simplifying further, we get:
32³(2[tex]\pi[/tex]) + 8i(32 - 32 + 36)(2[tex]\pi[/tex]) = 64[tex]\pi[/tex](32³ + 36).
Therefore, the value of the integral for |z| = 4 is 64[tex]\pi[/tex](32³ + 36).
To learn more about integration from the given link
brainly.com/question/30094386
#SPJ4
5 pts Question 9 Suppose that FQ₁Q2. What is the value of F given that k = 9.0 x 10%, Q₁ = 7 x 106 02-8 x 10-6, and = 10 x 10-3? Please express your answer as a whole number (integer) and put it in the answer box.
In the given equation F = kQ₁Q₂, we are given the values k = 9.0 x 10%, Q₁ = 7 x 10⁶, and Q₂ = 8 x 10⁻⁶. We need to find the value of F.
To find the value of F, we can substitute the given values into the equation F = kQ₁Q₂ and evaluate it. F = (9.0 x 10%)(7 x 10⁶)(8 x 10⁻⁶) = (9.0 x 10⁻¹)(7 x 10⁶)(8 x 10⁻⁶) = 9.0 x 7 x 8 x 10⁻¹⁻⁶⁺⁻⁶ = 504 x 10⁻¹⁰ = 5.04 x 10⁻⁹. Therefore, the value of F is 5.04 x 10⁻⁹.
To know more about equation here: brainly.com/question/29657983
#SPJ11
Solve each of the following by Laplace Transform: day + 2 dy dt ty sinh 3t - - 5 cosh 3t 1.) dt2 y(0) -2 y' (0) = 5 (35 points) dy -3+ sin(4t) e 2.) dt2 day 4 5y = e dt y (0) = 3 y' (0) = 10 (35 points) = = = d'y day dy + бу = — 12 dt 3.) y(0) = 1 y' (0) = 4 y' (0) = -2 (30 points) dt3 +4. dt2 ; = =
The final solutions by Laplace Transform are as follows:
s³ Y(s) - s² - 4s + 2s² Y(s) - 4sY(s) + Y(s) + (6/(s²-9)) - (5/(s²+9))Y(s) = 1
Y(s) = (6/(s²-9)) - (5/(s²+9)) + s²Y(s) - 3s + 4
Here are the Laplace Transforms of the following expressions;
dt²y - 2dy/dt = 5 with y(0) = 0 and y'(0) = 5.
The Laplace Transform of dt²y is L{dt²y} = s² Y(s) - s y(0) - y'(0).
The Laplace Transform of 2dy/dt is L{2dy/dt} = 2sY(s) - y(0).
The Laplace Transform of 5 is L{5} = 5/s.
Substituting in the given values, we get the following:
s² Y(s) - s(0) - 5 + 2sY(s) = 5/s(s² + 2s)
Y(s) = 5/(s(s² + 2s)) + s(0) + 5 = 5/s - 5/(s+2) + 5
Y(s) = 5/s - 5/(s+2) + 5/s(s² + 2s)
Y(s) = (5/s) - (5/(s+2)) + (5/(s(s²+2s)))
dt²y + 4dy/dt + 5y = e^t with y(0) = 3 and y'(0) = 10.
The Laplace Transform of dt²y is L{dt²y} = s² Y(s) - s y(0) - y'(0).
The Laplace Transform of 4dy/dt is L{4dy/dt} = 4s Y(s) - y(0).
The Laplace Transform of 5y is L{5y} = 5 Y(s).
The Laplace Transform of e^t is L{e^t} = 1/(s-1).
Substituting in the given values, we get the following:
s² Y(s) - s(3) - 10 + 4s
Y(s) + 5 Y(s) = 1/(s-1)
Y(s) = (1/(s-1))/(s² + 4s + 5) + 3s/(s²+4s+5) + 10/(s²+4s+5) + (4/(s²+4s+5)) - (5/(s²+4s+5))y + 2
dy/dt + t sinh 3t - 5 cosh 3t = 0 with y(0) = 1, y'(0) = 4, and y''(0) = -2.
The Laplace Transform of y is Y(s), the Laplace Transform of dy/dt is sY(s) - y(0) = sY(s) - 1, and the Laplace Transform of d²y/dt² is s²Y(s) - sy(0) - y'(0) = s²Y(s) - 4s + 2.
Substituting these values, we get the following:
s³ Y(s) - s² - 4s + 2s² Y(s) - 4sY(s) + Y(s) + (6/(s²-9)) - (5/(s²+9))Y(s) = 1Y(s) = (6/(s²-9)) - (5/(s²+9)) + s²Y(s) - 3s + 4
To know more about Laplace visit:
brainly.com/question/30759963
#SPJ11
Find the domains of the functions defined by the following formulas:
(a) y = √5-x
(b) y = 2x-1/x²-x
(c) y =√x-1/(x-2)(x+3)
Problem 5
(a) Find the domain of the function f defined by the formula f(x) = 3x+6/x-2
(b) Show that the number 5 is in the range of f by finding a number x such that (3x+6)/(x - 2) = 5.
(c) Show that the number 3 is not in the range of f.
a. The domain of the function is (-∞, 5].
b. The domain of the function is (-∞, 0) ∪ (0, 1) ∪ (1, ∞)
c. The domain of the function is [1, 2) ∪ (2, -3) ∪ (-3, ∞)
Problem 5.
a. the domain of the function is (-∞, 2) ∪ (2, ∞)
b. when x = 2, the value of f(x) is 5, indicating that 5 is in the range of f.
c. Since x has no solution, number 3 is not in the range of f.
What are the domains of the function?(a) For the function y = √(5 - x), the radicand (5 - x) must be non-negative, since we cannot take the square root of a negative number. Therefore, we have the inequality:
5 - x ≥ 0
Solving this inequality, we find:
x ≤ 5
Hence, the domain of the function is (-∞, 5].
(b) For the function y = (2x - 1)/(x² - x), the denominator cannot be equal to zero, as division by zero is undefined. Therefore, we have the equation:
x² - x ≠ 0
Factoring the quadratic, we get:
x(x - 1) ≠ 0
Setting each factor not equal to zero, we find:
x ≠ 0, x ≠ 1
Hence, the domain of the function is (-∞, 0) ∪ (0, 1) ∪ (1, ∞).
(c) For the function y = √(x - 1)/[(x - 2)(x + 3)], the radicand (x - 1) must be non-negative, and the denominator (x - 2)(x + 3) cannot be equal to zero. Therefore, we have the following conditions:
x - 1 ≥ 0 (x - 1 must be non-negative)
x - 2 ≠ 0 (x - 2 cannot be zero)
x + 3 ≠ 0 (x + 3 cannot be zero)
Solving these conditions, we find:
x ≥ 1 (x must be greater than or equal to 1)
x ≠ 2 (x cannot be equal to 2)
x ≠ -3 (x cannot be equal to -3)
Hence, the domain of the function is [1, 2) ∪ (2, -3) ∪ (-3, ∞).
Problem 5:
(a) For the function f(x) = (3x + 6)/(x - 2), the denominator (x - 2) cannot be equal to zero. Therefore, we have the condition:
x - 2 ≠ 0
Solving this condition, we find:
x ≠ 2
Hence, the domain of the function is (-∞, 2) ∪ (2, ∞).
(b) To show that the number 5 is in the range of f, we need to find a number x such that (3x + 6)/(x - 2) = 5. Solving this equation, we have:
3x + 6 = 5(x - 2)
3x + 6 = 5x - 10
10 - 6 = 5x - 3x
4 = 2x
x = 2
Therefore, when x = 2, the value of f(x) is 5, indicating that 5 is in the range of f.
(c) To show that the number 3 is not in the range of f, we need to prove that there is no value of x that satisfies (3x + 6)/(x - 2) = 3. However, when we solve this equation, we get:
3x + 6 = 3(x - 2)
3x + 6 = 3x - 6
6 = -6
This equation leads to a contradiction, which means that there is no solution for x. Hence, the number 3 is not in the range of f.
Learn more on domain of a function here;
https://brainly.com/question/17121792
#SPJ4
2. [15 Marks] Let X be a random variable with the probability density function (pdf), 1x (2) = {30/70-1(0/2)22-16-21/2, x>0; * ≤ 0; where > 0. Consider the transformations, Y = X¹ and W = (Y₁ + Y₂ - 2v)/√Av where Y₁ and Y₂ are independent variables with the same distribution as Y. a) Show that the pdf of Y is, fy (y) = 2/1/23/2-1e-3/2 y>0 0, VSO b) Use the convolution formula to show that, Jy₁+Y₂ (w) = (²1-/2 10. w>0; w ≤ 0. c) Show that for some range of t, the moment generating function (mgf) of Y₁+ Y2 is, My₁+₂ (t) = (1 - 2t)". Determine the values of t when the mgf does not exist.
a) To find the probability density function (pdf) of Y, we use the transformation method. Let's find the cumulative distribution function (CDF) of Y first.
The CDF of Y is given by:
Fy(y) = P(Y ≤ y) = P(X¹ ≤ y) = P(X ≤ y^(1/2)) [since Y = X¹]
We can substitute the given pdf of X and calculate the CDF:
Fy(y) = ∫[0, y^(1/2)] (30/(70-1)(x^2 - 16 - 21/2)) dx
Integrating this expression will give us the CDF of Y. Then, to find the pdf of Y, we differentiate the CDF with respect to y:
fy(y) = d/dy Fy(y)
b) To find the pdf of the sum Y₁ + Y₂, we can use the convolution formula. The convolution of two independent random variables Y₁ and Y₂ is given by:
fY₁+Y₂(w) = ∫[-∞, ∞] fY₁(u) fY₂(w-u) du
Using the pdf obtained in part (a), we substitute it into the convolution formula and integrate to find the pdf of the sum Y₁ + Y₂.
c) The moment generating function (mgf) of a random variable is given by:
My(t) = E[e^(tX)]
To find the mgf of Y₁ + Y₂, we can use the fact that the mgf of the sum of independent random variables is the product of their individual mgfs. Since Y₁ and Y₂ have the same distribution as Y, we can write the mgf of Y₁ + Y₂ as:
My₁+₂(t) = (My(t))^2
Substitute the expression for My(t) obtained from the pdf in part (a) and simplify to find the mgf of Y₁ + Y₂.
To determine the values of t when the mgf does not exist, we need to check if there are any values of t for which the integral defining the mgf converges or diverges. If the integral diverges, the mgf does not exist for that particular value of t.
Learn more about probability density function here:
https://brainly.com/question/30403935
#SPJ11
A.O. Smith has $\$ 163.4$ (million) worth of inventory and their COGS are $\$ 1,233$ (million). Their average holding cost per unit per year is $\$ 11.08$. What is the average inventory cost per unit for $A . O$. Smith?
Instruction: Round your answer to the nearest \$0.01.
The average inventory cost per unit
$\$ 14.75$
A.O. Smith has $\$ 163.4$ (million) worth of inventory and their COGS are $\$ 1,233$ (million). Their average holding cost per unit per year is $\$ 11.08$. What is the average inventory cost per unit for A.O. Smith?
Instruction: Round your answer to the nearest \$0.01.
The average inventory cost per unit
$\$ \quad 14.75$
The average inventory cost per unit for A.O. Smith is approximately $1.47.
To calculate the average inventory cost per unit for A.O. Smith, we can use the following formula:
Average Inventory Cost per Unit = (Inventory Value / COGS) * Average Holding Cost per Unit
Given:
Inventory Value = $163.4 million
COGS = $1,233 million
Average Holding Cost per Unit = $11.08
Substituting these values into the formula:
Average Inventory Cost per Unit = (163.4 / 1233) * 11.08
Calculating the result:
Average Inventory Cost per Unit = (0.1326) * 11.08 = $1.469608
Rounding the answer to the nearest $0.01:
Average Inventory Cost per Unit ≈ $1.47
Therefore, the average inventory cost per unit for A.O. Smith is approximately $1.47.
Learn more about average inventory cost
brainly.com/question/21894699
#SPJ4
Solve the following system by using the Gauss elimination.
−3x − y + z = 0
2x + 4y − 5z = −3
x − 2y + 3z = 1
Let's use the Gauss elimination method to solve the following system: \begin{align*}-3x - y + z &= 0\\2x + 4y - 5z &= -3\\x - 2y + 3z &= 1\end{align*}Firstly,
we'll express the system in the augmented matrix form as follows: \[\begin{bmatrix} -3 & -1 & 1 & | & 0\\ 2 & 4 & -5 & | & -3\\ 1 & -2 & 3 & | & 1 \end{bmatrix}\]We'll begin by using row operations to transform the matrix into a triangular form, where the leading coefficient of each row (except for the first row) is 1. $$\begin{aligned} \begin{bmatrix} -3 & -1 & 1 & | & 0\\ 2 & 4 & -5 & | & -3\\ 1 & -2 & 3 & | & 1 \end{bmatrix} &\sim \begin{bmatrix} -3 & -1 & 1 & | & 0\\ 0 & 10 & -13 & | & -3\\ 0 & -1 & 2 & | & 1 \end{bmatrix} \quad \text{(R2 + 2R1)}\\ &\sim \begin{bmatrix} -3 & -1 & 1 & | & 0\\ 0 & 10 & -13 & | & -3\\ 0 & 0 & \frac{7}{5} & | & -\frac{1}{5} \end{bmatrix} \quad \text{(R3 + (1/10)R2)} \end{aligned}$$Now, we'll use back-substitution to obtain the values of x, y, and z. \begin{align*} \frac{7}{5}z &= -\frac{1}{5} \\ \Rightarrow z &= -\frac{1}{7} \\ 10y - 13z &= -3 \\ \Rightarrow 10y - 13\left(-\frac{1}{7}\right) &= -3 \\ \Rightarrow 10y + \frac{13}{7} &= -3 \\ \Rightarrow 10y &= -\frac{34}{7} \\ \Rightarrow y &= -\frac{17}{35} \\ -3x - y + z &= 0 \\ \Rightarrow -3x - \left(-\frac{17}{35}\right) - \frac{1}{7} &= 0 \\ \Rightarrow -3x &= \frac{8}{35} \\ \Rightarrow x &= -\frac{8}{105} \end{align*}Therefore, the solution to the given system is: $$\boxed{x = -\frac{8}{105}, \, y = -\frac{17}{35}, \, z = -\frac{1}{7}}$$
To know more about Gauss elimination visit:
https://brainly.com/question/30760531
#SPJ11
The system of linear equations is given by: [tex]$$\begin{aligned}-3x - y + z &= 0 \\2x + 4y - 5z &= -3 \\x - 2y + 3z &= 1\end{aligned}$$I[/tex]n the Gauss elimination process, we try to transform the system of equations in such a way that the equations become easier to solve.
We do this by adding or subtracting the equations to eliminate one of the variables. The steps to solve the given system by using the Gauss elimination are as follows:
Step 1: Write the augmented matrix for the system. The augmented matrix for the given system is:
[tex]$$\left[\begin{array}{ccc|c}-3 & -1 & 1 & 0 \\2 & 4 & -5 & -3 \\1 & -2 & 3 & 1\end{array}\right]$$[/tex]
Step 2: Add 2 times the first row to the second row. We add 2 times the first row to the second row to eliminate the coefficient of x in the second equation. The matrix after this operation is:$$\left[\begin{array}{ccc|c}-3 & -1 & 1 & 0 \\0 & 2 & -3 & -3 \\1 & -2 & 3 & 1\end{array}\right]$$
Step 3: Add 3 times the first row to the third row. We add 3 times the first row to the third row to eliminate the coefficient of x in the third equation. The matrix after this operation is:
[tex]$$\left[\begin{array}{ccc|c}-3 & -1 & 1 & 0 \\0 & 2 & -3 & -3 \\0 & -5 & 6 & 1\end{array}\right]$$Step 4: Add $\frac{5}{2}$[/tex]times the second row to the third row.
We add $\frac{5}{2}$ times the second row to the third row to eliminate the coefficient of $y$ in the third equation.
To know more about elimination visit:
https://brainly.com/question/32403760
#SPJ11
please 94 4. Independence think about about Theorem 4.2.1 (Factorization Criterion) A (X₁, te T) indexed by a set T, is independent iff for all finite JCT ZeJ) =][PIXsx], WeR. LEJ) (4.4) teJ Proof. Because of Definition 4.1.4, it suffices to show for a finite index set J that (X₁, te J) is independent iff (4.4) holds. Define give from me ? C₁ = {[X₁ ≤x], x € R}. A good Then (i) C, is a 7-system since grade. [X₁ ≤ x][X₁ ≤y] = [X₁ ≤ x ^y] and (ii) o (C₁) = o(X₂). Now (4.4) says (C₁, te J) is an independent family and therefore by the Basic Criterion 4.1.1, {o (C₁) = o(X₁), te J) are independent. you answer , you it. it. I If family of random variables
By demonstrating that the family (C₁, te J) is independent when equation (4.4) holds for a finite index set J, the proof establishes the independence of the family {o(C₁) = o(X₁), te J} as well.
The Factorization Criterion, Theorem 4.2.1, states that a family of random variables indexed by a set T is independent if and only if a certain condition, expressed as equation (4.4), holds for all finite subsets J ⊆ T.
This criterion establishes the necessary and sufficient condition for independence in terms of factorization. In order to prove this criterion, the concept of a 7-system is introduced. It is shown that if the family (C₁, te J), where C₁ is defined as {[X₁ ≤ x], x ∈ R}, satisfies equation (4.4) for a finite index set J, then it is an independent family.
By applying the Basic Criterion 4.1.1, it follows that the family {o(C₁) = o(X₁), te J} of random variables is also independent. Now, let's delve into the explanation of the answer. The Factorization Criterion is a theorem that establishes a condition for independence in a family of random variables. It states that the family is independent if and only if equation (4.4) holds for all finite subsets J ⊆ T.
This criterion is proven by introducing the concept of a 7-system, denoted as C₁, which consists of indicator functions of the form {[X₁ ≤ x], x ∈ R}. This 7-system satisfies two properties: (i) it forms a 7-system since the product of indicator functions can be expressed as another indicator function, and (ii) the algebra generated by C₁ is the same as the algebra generated by X₁.This is done by applying the Basic Criterion 4.1.1, which states that if a family of random variables is independent, then any function of those variables is also independent.
Therefore, the theorem concludes that the family of random variables {o(C₁) = o(X₁), te J} is independent if equation (4.4) holds for all finite subsets J, providing the factorization criterion for independence.
To learn more about Criterion, click here:
brainly.com/question/32196938
#SPJ11
find an equation of the plane. the plane that passes through the line of intersection of the planes x − z = 2 and y 4z = 2 and is perpendicular to the plane x y − 4z = 4
the equation of the plane that passes through the point (2, - 14) and is parallel to the vector (1, 1, 4) is given by:r.(1, 1, 4) = p.(1, 1, 4) => x + y + 4z = 2 + 14 + 4( - 2) => x + y + 4z = 6. Therefore, the equation of the required plane is x + y + 4z = 6.
Given equation of plane are:x - z = 2 ....(1)y + 4z = 2 ....(2)xy - 4z = 4 ....(3)We are supposed to find an equation of the plane that passes through the line of intersection of the planes (1) and (2) and is perpendicular to the plane (3).To find the line of intersection of the planes (1) and (2), we solve the two planes simultaneously. The solution is the line of intersection of the two planes.To find the solution, we first eliminate x by adding equations (1) and (2) to obtain:y + x + 4z = 4 ...(4)Similarly, we eliminate x from equations (1) and (3) to obtain:xy - z - 4z = 4 => y(z + 1) = z + 4 => y = [tex]\frac{(z + 4)}{(z + 1)}[/tex] ...(5)Now, we eliminate y from equations (4) and (5) to get an expression for z. Substituting that value of z in any of the equations, we can obtain the corresponding values of x and y. Once we have two such points, we can write the equation of the line that passes through them. That will be the line of intersection of the planes (1) and (2).Solving equations (4) and (5), we get z = - 4 or z = 2. Putting z = - 4 in equation (5), we get y = - 2.5 and putting z = - 4 and y = - 2.5 in equation (4), we get x = 0.5. Therefore, the line of intersection of the planes (1) and (2) is (0.5, - 2.5, - 4).Similarly, putting z = 2 in equation (5), we get y = 2 and putting z = 2 and y = 2 in equation (4), we get x = - 2. Therefore, the line of intersection of the planes (1) and (2) is (- 2, 2, 2).We know that the equation of the plane that passes through a point A(x₁, y₁, z₁) and is perpendicular to a vector n = (a, b, c) is given by:a(x - x₁) + b(y - y₁) + c(z - z₁) = 0Therefore, the equation of the plane that passes through the line of intersection of the planes (1) and (2) and is perpendicular to the plane (3) is:x - 0.5y - 2z = 1 ...(6)To obtain the above equation, we first find a vector that is parallel to the line of intersection of the planes (1) and (2). For that, we take the cross-product of the normals to the planes (1) and (2) as follows:n₁ × n₂ = (1, 0, - 1) × (0, 4, 1) = (4, 1, 4)Now, we find a point on the line of intersection of the planes (1) and (2). One such point is (0.5, - 2.5, - 4).Therefore, the required plane is 4x + y + 4z = 14.Therefore, we found the required equation of the plane. The equation of the plane is x + y + 4z = 6.
To know more about equation of the plane visit:
brainly.com/question/32163454
#SPJ11
Which of the following is not an assumption (condition) for a one- population mean hypothesis test. a. Random Sample b. Sample data should be either normal or have a sample size of at least 30. c. Individuals in sample should be independent d. Sample data should have at least ten successes and at least ten failures.
The correct answer is d. Sample data should have at least ten successes and at least ten failures.
The four assumptions for a one-population mean hypothesis test are:
1.Random Sample
2.Sample data should be either normal or have a sample size of at least 30.
3.Individuals in the sample should be independent
4.Sample data should have no less than ten successes and ten failures for hypothesis tests of proportions.
This assumption is related to the fourth assumption for a hypothesis test of proportion rather than a one-population mean hypothesis test.
Therefore, the answer is d.
Sample data should have at least ten successes and at least ten failures.
To know more about successes, visit:
https://brainly.com/question/27829227
#SPJ11
Separate the following differential equation and integrate to find the general solution: y = cos(-8x) cos"" (9y)
Separation of variables means that the independent and dependent variables of the differential equation are moved to opposite sides of the equation.
When we have only one dependent variable in the equation, we usually arrange the equation in terms of that variable and its derivatives. In this case, the given differential equation is: $y = \cos (-8x) \cos(9y)$.ExplanationWe have to separate the variables first, then integrate both sides. So, let's begin with the separation of variables. By separating the variables, we get:\[\frac{1}{\cos(9y)}dy=\cos(-8x)dx\]
Summary We begin with the separation of variables by moving the independent variable to the right-hand side of the equation and the dependent variable to the left-hand side of the equation. Integrating both sides of the equation and obtaining the solution for
Learn more about variables click here:
https://brainly.com/question/28248724
#SPJ11
3 Find the slope of the line containing the following two points: (3/10 - 1/2) and (1/5 . 1/5)
The two points given are (3/10 - 1/2) and (1/5 . 1/5). Here is how to find the slope of the line containing these two points:The slope of the line containing the two points is -70. Therefore, CV.
Step 1: Assign x₁, y₁, x₂, y₂ to the two points respectively. In this case: x₁ = 3/10, y₁ = -1/2, x₂ = 1/5, y₂ = 1/5.Step 2: Apply the slope formula. The slope of the line containing the two points is given by:(y₂ - y₁) / (x₂ - x₁)Step 3: Substitute the values into the formula and simplify as much as possible.(1/5 - (-1/2)) / (1/5 - 3/10)= (1/5 + 1/2) / (2/10 - 3/10)= (1/5 + 1/2) / (-1/10)= (2/10 + 5/10) / (-1/10)= 7 / (-1/10)Step 4: Simplify the expression by dividing the numerator and denominator by the common factor of 7.7 / (-1/10) = -70. The slope of the line containing the two points is -70. Therefore, CV.
To know more about slope of the line visit:
https://brainly.com/question/16180119
#SPJ11
1. Evaluate the following integrals, showing your workings clearly a. ∫³₁ 1/ eˣ + e⁻ˣ dx 10marks
b. ∫²₁x(1-x)²⁰²² dx 10marks
Evaluating the integrals, we get ∫³₁ 1/ eˣ + e⁻ˣ dx = (1/2) ln [(e^2 + 1)/(e^6 + 1)]. ∫²₁x(1-x)²⁰²² dx = 4/2023.
a. ∫³₁ 1/ eˣ + e⁻ˣ dx
To integrate the given expression, the substitution method should be used:
Let u = e^x + e^(-x)Note that if u = e^x + e^(-x), then du/dx = e^x - e^(-x) dx (1)
Also, if u = e^x + e^(-x), then e^x = (u + (u^2 - 4)^(1/2))/2 and e^(-x) = (u - (u^2 - 4)^(1/2))/2.
Thus, e^x + e^(-x) = (u + (u^2 - 4)^(1/2))/2 + (u - (u^2 - 4)^(1/2))/2 = u
Therefore, du = (e^x - e^(-x)) dx = 2 dx (by (1)).Thus, we have∫³₁ 1/ eˣ + e⁻ˣ dx = ∫u=2u=0 (1/u) (du/2) = (1/2) ln |u| from 3 to 1= (1/2) ln |e^x + e^(-x)|
from 3 to 1= (1/2) ln [(e^1 + e^(-1))/(e^3 + e^(-3))]= (1/2) ln [(e^2 + 1)/(e^6 + 1)]
b. ∫²₁x(1-x)²⁰²² dx
For this integral, we apply the power rule and the constant multiple rule:
∫²₁x(1-x)²⁰²² dx = [(1-x)^2023 / (-2023)] x² from 2 to 1= [(1-1)^2023 / (-2023)] 1 - [(1-2)^2023 / (-2023)] 4= 0 - [-1/2023] 4= 4/2023
Therefore, ∫²₁x(1-x)²⁰²² dx = 4/2023.
More on integrals: https://brainly.com/question/18125359
#SPJ11
True or False
Given the integral
∫4(2x + 1)² dx
if using the substitution rule
U = (2x + 1)
O True O False
Using the substitution U = (2x + 1) is correct, and the statement is True.
To solve this problemWe can set U = (2x + 1) by applying the substitution rule. We obtain dU = 2dx by dividing both sides with regard to x. When we solve for dx, we get dx = (1/2)dU.
Now, we substitute these values in the integral:
∫4(2x + 1)² dx = ∫4U² (1/2)dU
Simplifying the expression, we have:
(1/2)∫4U² dU
Now we can integrate with respect to U:
(1/2) * (4/3)U³ + C
(2/3)U³ + C
Finally, substituting back U = (2x + 1), we get:
(2/3)(2x + 1)³ + C
Therefore, using the substitution U = (2x + 1) is correct, and the statement is True.
Learn more about substitution rule here : brainly.com/question/30239667
#SPJ4
Workout the composite shape
Answer:
3964 m^2.
Step-by-step explanation:
The area = sum of 5 rectangles
= 23*25 + 29*25 + 30*25 + 29*22 + 29*44
= 3964
Let f(x)=3x² +3x+9 (a) Determine whether f(x) is irreducible as a polynomial in Z/9Z[x]. If it is reducible, show the factorization. If it is irreducible, briefly explain why. (b) Determine the roots of f(x) as a polynomial in Z/9Z[x]. Why is this answer different from the factorization in the previous part? (c) Determine whether f(x) is irreducible as a polynomial in Q[x]. If it is reducible, show the factorization. If it is irreducible, briefly explain why. (d) Determine whether f(x) is irreducible as a polynomial in C[x]. If it is reducible, show the factorization. If it is irreducible, briefly explain why.
we can use Eisenstein’s criterion to show that f(x) is irreducible in Z[x]. Take p=3. Then 3|3, 3|3, but 3 does not divide 9. Also, 3²=9 does not divide 9.
(a) Let f(x)=3x²+3x+9∈Z/9Z[x]. Since 3≠0 in Z/9Z, then 3 is invertible in Z/9Z. So, by Gauss’ lemma, f(x) is irreducible in Z/9Z[x] if and only if it is irreducible in Z[x].
(b) Simplifying, we get 3(a²+a+3)=0. But 3 is invertible in Z/9Z, so a²+a+3=0. Now we have to find all the solutions to the congruence a²+a+3≡0 mod 9.
We find that the congruence a²+a+3≡0 mod 3 has no solutions in Z/3Z, because the possible values of a in Z/3Z are 0, 1, 2, and for each value of a, we get a different value of a²+a+3. Hence, the congruence a²+a+3≡0 mod 9 has no solution in Z/3Z, and so it has no solution in Z/9Z.
(c) Since f(x) is a polynomial of degree 2, it is reducible over Q if and only if it has a root in Q. To check whether f(x) has a root in Q, we use the rational root theorem. The possible rational roots of f(x) are ±1, ±3, ±9. We check these values, and we find that none of them is a root of f(x).
(d) Since f(x) is a polynomial of degree 2, it is reducible over C if and only if it has a root in C. To find the roots of f(x), we use the quadratic formula:
a=3, b=3, c=9. Then the roots of f(x) are x=(-b±√(b²-4ac))/(2a)=(-3±√(-27))/6=(-1±i√3)/2. Since these roots are not in C, f(x) has no roots in C, and hence, it is irreducible in C[x].
To know more about Eisenstein’s criterion visit :
https://brainly.com/question/30928123
#SPJ11
Need this in 10 minutes will leave upvote
Question 9 2 pts Your friend is thinking about buying shares of stock in a company. You have been tracking the closing prices of the stock shares for the past 90 trading days. Which type of graph for the data would be best to show your friends ?
a. pareto chart
b. time-series graph
c.circle graph
d.none of these choices
e. histogram"
The best type of graph to show your friend the closing prices of stock shares over the past 90 trading days would be (b) a time-series graph.
A time-series graph is used to display data points collected over a period of time, making it the most suitable choice for tracking the closing prices of stock shares.
Representation of Time: A time-series graph explicitly represents time on the x-axis, allowing your friend to observe the trends and patterns in the stock prices over the 90 trading days. This enables a clear visualization of how the prices have changed over time.
Data Continuity: In a time-series graph, the data points are connected by line segments, emphasizing the continuity of the data. This is crucial for understanding the progression and flow of stock prices, providing a more accurate representation compared to other graph types.
Trend Analysis: By using a time-series graph, your friend can easily identify any long-term trends in the stock prices. They can observe if the prices have been consistently rising, falling, or fluctuating over the 90 trading days. This information is valuable for making informed investment decisions.
Seasonality and Cyclical Patterns: If there are any recurring patterns or seasonality in the stock prices, a time-series graph will help your friend identify them. They can spot regular patterns that occur at specific intervals, enabling them to make predictions or take advantage of potential opportunities.
Comparative Analysis: A time-series graph also allows for the comparison of multiple stock prices. If your friend is considering investing in different companies, they can plot the closing prices of multiple stocks on the same graph to compare their performance over time.
In summary, a time-series graph is the most suitable choice for showing your friend the closing prices of stock shares over the past 90 trading days. It provides a comprehensive and visual representation of the data, allowing for trend analysis, identification of patterns, and comparative analysis.
To learn more about time-series graph, click here: brainly.com/question/17014289
#SPJ11
Is it possible to create a linear function that is not an arithmetic sequence when its domain is restricted to the positive integers? If yes, create such a linear function. If no, explain why it is not possible.
Yes, it is possible to create a linear function that is not an arithmetic sequence when its domain is restricted to the positive integers.
Explanation:An arithmetic sequence is a sequence of numbers such that the difference between consecutive terms is constant. For example, the sequence 2, 4, 6, 8, 10 is an arithmetic sequence with a common difference of 2.However, not all linear functions are arithmetic sequences. A linear function is defined by the equation y = mx + b, where m is the slope and b is the y-intercept. If m is a non-integer constant, then the function will not be an arithmetic sequence.Let's consider the function y = (1/2)x + 1. When x = 1, y = 3/2; when x = 2, y = 2; when x = 3, y = 5/2; and so on. This function is linear, but it is not an arithmetic sequence. Therefore, it is possible to create a linear function that is not an arithmetic sequence when its domain is restricted to the positive integers.
to know more about arithmetic visit:
https://brainly.in/question/5492940
#SPJ11
Yes, it is possible to create a linear function that is not an arithmetic sequence when its domain is restricted to the positive integers.
An arithmetic sequence is a sequence of numbers such that the difference between consecutive terms is constant. For example, the sequence 2, 4, 6, 8, 10 is an arithmetic sequence with a common difference of 2. However, not all linear functions are arithmetic sequences.
A linear function is defined by the equation y = mx + b, where m is the slope and b is the y-intercept. If m is a non-integer constant, then the function will not be an arithmetic sequence.
Let's consider the function y = (1/2) x + 1. When x = 1, y = 3/2; when x = 2, y = 2; when x = 3, y = 5/2; and so on. This function is linear, but it is not an arithmetic sequence.
Therefore, it is possible to create a linear function that is not an arithmetic sequence when its domain is restricted to the positive integers.
To know more about arithmetic visit:
https://brainly.com/question/16415816
#SPJ11
When performing a paired t-test, what will you do if
one of the values for a pair is missing? Will you know when you
make a false discovery? Explain.
If a value is missing in a paired t-test, the common approach is to exclude that pair from the analysis, and the issue of missing values does not directly relate to false discovery; false discovery pertains to the risk of erroneously identifying a significant result when there is no true effect or difference, typically in the context of multiple hypothesis testing.
When performing a paired t-test, if one of the values for a pair is missing, the common practice is to exclude that pair from the analysis. In other words, the pair with the missing value is not considered in the calculation of the paired differences used in the t-test.
Regarding false discovery, it's important to note that the concept of false discovery is typically associated with multiple hypothesis testing, rather than specifically with missing values. False discovery occurs when a statistically significant result is declared, but it is actually a false positive or a Type I error.
If a value is missing in a paired t-test, excluding that pair from the analysis may affect the statistical power and precision of the test, but it doesn't directly relate to false discovery. False discovery is primarily concerned with the interpretation of statistical significance in the context of multiple tests or comparisons. It relates to the likelihood of erroneously identifying a significant result when there is no true effect or difference.
To determine the potential for false discovery in a paired t-test, it is necessary to consider the overall study design, sample size, alpha level, and the number of hypothesis tests conducted. Adjustments, such as the Bonferroni correction or false discovery rate control, can be applied to address multiple testing issues and minimize the risk of false discoveries.
To know more about paired t-test,
https://brainly.com/question/31582423
#SPJ11
Mention two ways in which you can detect whether numerical data
are from a population with normal distribution
There are two ways to detect whether numerical data comes from a population with a normal distribution are histogram and normal probability plots.
There are two ways to detect whether numerical data comes from a population with a normal distribution. These two ways are histogram and normal probability plots.
How to detect whether numerical data comes from a population with a normal distribution:
Histograms: Histograms are graphical representations of data distributions. The histogram is a bar chart that shows the frequencies of a variable that has been grouped into a set of continuous intervals or bins.
Normal probability plots: A normal probability plot is a graphical method for assessing whether the data comes from a normal distribution. In a normal probability plot, the data is plotted against theoretical quantiles of the normal distribution.
If the data comes from a normal distribution, the points will form a straight line.
Know more about the normal distribution
https://brainly.com/question/4079902
#SPJ11
If 4) - 12. (AUB) - 18, and (B) -9, what is n(AΠB)? a. 1
b.12 c.5 d.2
e.3
f.9
The value of n (A ∩ B) is,
⇒ n (A ∩ B) = 3
We have to given that,
Values are,
n (A) = 12
n (A ∪ B) = 18
And, n (B) = 9
We can find the value of n (A ∩ B) by using the formula,
⇒ n (A ∪ B) = n (A) + n (B) - n (A ∩ B)
⇒ n (A ∩ B) = n (A) + n (B) - n (A ∪ B)
Substitute all the values, we get;
⇒ n (A ∩ B) = 12 + 9 - 18
⇒ n (A ∩ B) = 21 - 18
⇒ n (A ∩ B) = 3
Therefore, The value of n (A ∩ B) is,
⇒ n (A ∩ B) = 3
Learn more about the combination visit:
brainly.com/question/28065038
#SPJ4
Find csc xif sin x = 2√5/5
Use the Reciprocal and Quotient Identities
Find Cos α if tan α = √2/2 and sin α = - √3/3
We are required to find the value of csc(x) for sin(x) = 2√5/5.
We can begin by using the Pythagorean identity which states that:
sin^{2}x+cos^{2}x = 1
Squaring the given value of sin(x), we get:
(sinx)^2 = (\frac{2√5}{5})^2 = \frac{20}{25} = \frac{4}{5}
Solving for cos(x), we get:
cosx = \pm \sqrt{1 - (sinx)^2}
cosx = \pm \sqrt{1 - \frac{4}{5}} = \pm \frac{\sqrt{5}}{5}
We know that csc(x) is the reciprocal of sin(x), so we have:
cscx = \frac{1}{sinx}
cscx = \frac{1}{\frac{2√5}{5}} = \frac{5}{2√5}
cscx = \frac{\sqrt{5}}{2}
The value of csc(x) for sin(x) = 2√5/5 is csc(x) = sqrt(5)/2.
The other part of the question was to find cosα given that tanα = √2/2 and sinα = - √3/3.
Using the quotient identity, we have:
tan\alpha = \frac{sin\alpha}{cos\alpha}
Substituting the given values and solving for cosα, we get:
cos\alpha = \frac{sin\alpha}{tan\alpha} = \frac{-\sqrt{3}/3}{\sqrt{2}/2} = -\sqrt{\frac{3}{2}}
Therefore, cosα = -sqrt(3/2).
To know more about reciprocal visit:
brainly.com/question/27642948
#SPJ11
In
November 2018, Perrigo had 91 million shares outstanding for a unit
price of 40 euros. Its Price to Book Ratio was 3.5. In addition,
Perrigo posted a net income of 166.4 million euros. What was its % financial profitability?
The answer based on the finance and share is financial profitability was 16%.
Given, shares outstanding = 91 million
Unit price = 40 euros
Price to book ratio = 3.5
Net income = 166.4 million euros
We know that the market capitalization of a company is given as:
Market capitalization = Share price x Shares outstanding
So, we can find the market capitalization of Perrigo as:
Market capitalization = 40 euros x 91 million= 3640 million euros
Now, we know that the price-to-book (P/B) ratio is given as:
Price-to-book ratio (P/B) = Market capitalization / Book value of equity
We can find the book value of equity as:
Book value of equity = Market capitalization / Price-to-book ratio= 3640 / 3.5= 1040 million euros
We can find the Return on Equity (ROE) as:
ROE = Net income / Book value of equity= 166.4 / 1040= 0.16 or 16%
Therefore, its % financial profitability was 16%.
To know more about Financial profitability visit:
https://brainly.com/question/30166283
#SPJ11
"1. Books in the library are found to have a mean
length of =450 pages with a
standard deviation of σ= 100 pages. What is the z-score
corresponding to a book of the
following length? (10 Marks)
a. 180 pages
b. 380 pages
c. 515 pages
d. 400 pages
e. 640 pages
Section B: Calculations [90 marks] 1. Books in the Cornerstone library are found to have a mean length of =450 pages with a standard deviation of o= 100 pages. What is the z-score corresponding to a book of the following length? (10 Marks) a. 180 pages b. 380 pages c. 515 pages d. 400 pages e. 640 pages
To calculate the z-score corresponding to a given book length, we can use the formula: z = (x - μ) / σ
where:
x is the given book length,
μ is the mean length of the books (450 pages),
σ is the standard deviation of the book lengths (100 pages), and
z is the z-score.
Let's calculate the z-scores for each of the given book lengths:
a. For 180 pages:
z = (180 - 450) / 100 = -2.7
b. For 380 pages:
z = (380 - 450) / 100 = -0.7
c. For 515 pages:
z = (515 - 450) / 100 = 0.65
d. For 400 pages:
z = (400 - 450) / 100 = -0.5
e. For 640 pages:
z = (640 - 450) / 100 = 1.9
So the z-scores for the given book lengths are:
a. -2.7
b. -0.7
c. 0.65
d. -0.5
e. 1.9
Learn more about Mean here -: brainly.com/question/1136789
#SPJ11
Two polynomials P and D are given. Use either synthetic or long division to divide p(x) by D(x), and express the quotient p(x)/D(x) in the form P(x)/D(x) = Q(X)+ R(X)/D(x) P(X) = 10x^3 + x^2 - 21x + 9, D(X) =5 x - 7
P(x)/D(x) =
To find the quotient of P(x) and D(x) using long division, we have to divide
[tex]10x^3 + x^2 - 21x + 9 by 5x - 7.[/tex]
Long division is a method of dividing polynomials and it's used to find the quotient and the remainder when dividing one polynomial by another.
The dividend is written in decreasing order of powers of the variable.
Divide [tex]10x^3 by 5x to get 2x^2[/tex],
then write this above the line.
Multiply [tex]2x^2 by 5x - 7[/tex] to get[tex]10x^3 - 14x^2[/tex].
Write this below the first polynomial.
Subtract [tex]10x^3 - 10x^3[/tex] to get 0 and
[tex]-21x - (-14x^2)[/tex] to get [tex]-21x + 14x^2[/tex].
Bring down the next term which is 9.
Multiply[tex]2x^2 by 5x[/tex] to get[tex]10x^2[/tex]
write this above the line.
Multiply [tex]2x^2[/tex] by -7 to get -14x, then write this below the second polynomial.
Add -21x and 14x^2 to get [tex]14x^2 - 21x[/tex].
Subtract -14x and -14x to get 0, then bring down the next term which is 9.
Divide [tex]14x^2[/tex]by 5x to get 2x, then write this above the line.
Multiply 2x by [tex]5x - 7[/tex] to get [tex]10x - 14[/tex].
Write this below the third polynomial. Subtract 9 and -14 to get 23. Since 23 is a constant,
[tex]P(x) =[/tex][tex]10x^3 + x^2 - 21x + 9D(x) = 5x - 7[/tex]and
[tex]P(x)/D(x) = Q(x) + R(x)/D(x)= 2x^2 + 2x - 3 + 23/(5x - 7).[/tex]
To know more about polynomial visit:-
https://brainly.com/question/11536910
#SPJ11
Evaluate the given integral by making an appropriate change of variables.
∫∫R 4 x - 5y / 4x - y dA, where R is the parallelogram enclosed by the lines x - 5y = 0, x - 5y = 1, 4x - y = 5, and 4x - y = 9
..........
The integral can be evaluated by making a change of variables. The appropriate change of variables is u = 4x - y and v = x - 5y.
To evaluate the given integral using a change of variables, we need to find a suitable transformation that simplifies the integrand and the region of integration. In this case, the appropriate change of variables is u = 4x - y and v = x - 5y. To determine the new limits of integration, we solve the system of equations formed by the four lines that enclose the region R. The equations are x - 5y = 0, x - 5y = 1, 4x - y = 5, and 4x - y = 9. Solving this system, we find the new limits of integration for u and v.
Next, we compute the Jacobian determinant of the transformation, which is the determinant of the matrix of partial derivatives of u and v with respect to x and y. The Jacobian determinant is given by |J| = (1/(-19)). Finally, we substitute the new variables and the Jacobian determinant into the integral expression and evaluate the integral over the new region of integration.
To learn more about matrix click here
brainly.com/question/28180105
#SPJ11
Salaries of 90 college graduates who took a statistics course in college have a mean of $105,911 and a standard deviation of $1,869. Construct a 97.3% confidence interval for estimating the population variance. Enter the upper bound of the confidence interval. (Round your answer to nearest whole number.)
To construct a confidence interval for estimating the population variance, we can use the chi-square distribution. The formula for the confidence interval is: [(n - 1) * s^2] / chi2_lower < σ^2 < [(n - 1) * s^2] / chi2_upper where n is the sample size, s is the sample standard deviation, σ^2 is the population variance, and chi2_lower and chi2_upper are the chi-square values corresponding to the desired confidence level.
In this case, we have a sample size of n = 90, a sample standard deviation of s = $1,869, and we want to construct a 97.3% confidence interval. Since the confidence interval is two-tailed, we need to find the chi-square values that correspond to (1 - 0.973) / 2 = 0.0135 on each tail.
Using a chi-square table or a statistical software, the chi-square value for the lower tail is approximately 60.832, and the chi-square value for the upper tail is approximately 132.535.
Substituting these values into the confidence interval formula, we get:
[(90 - 1) * (1,869)^2] / 60.832 < σ^2 < [(90 - 1) * (1,869)^2] / 132.535
Simplifying this expression, we find that the confidence interval for the population variance is approximately $94,214 < σ^2 < $169,788. Therefore, the upper bound of the confidence interval is $169,788 (rounded to the nearest whole number).
Learn more about chi-square table here: brainly.com/question/31505275
#SPJ11