Answer:
P.S
Explanation:
Because sulphur has low electronegative magnitude, hence low polarity potential.
The sulphur atom doesn't not get distorted hence increase in ionic degree character.
1. Enter the complete ionic equation when Li3PO4 and AgNO3 are mixed.2. Enter the net ionic equation when K2SO4 and Na2CO3 are mixed.3. Enter the complete ionic equation when K2SO4 and Na2CO3 are mixed.4. Enter the complete ionic equation when Fe(NO3)2 and Na2CO3 are mixed.5. Enter the net ionic equation when Fe(NO3)2 and Na2CO3 are mixed.6. Enter the complete ionic equation when BaCl2 and KOH are mixed.7. Enter the net ionic equation when BaCl2 and KOH are mixed.
Solution :
1. Ionic equation when [tex]$Li_3PO_4$[/tex] and [tex]$AgNO_3$[/tex] are mixed.
[tex]$3 Li^+ (aq) + PO_4^{3-} (aq) + 3Ag^+ (aq) + 3NO_3^-(aq) \rightarrow Ag_3PO_4(s)+3Li^+(aq)+3NO_3^-(aq)$[/tex]
Net ionic : [tex]$PO_4^{3-}(aq)+3 ag^+(aq) \rightarrow Ag_3PO_4(s) $[/tex]
2. [tex]$K_2SO_4$[/tex] and [tex]$Na_2CO_3$[/tex]
No reaction
3. [tex]$K_2SO_4$[/tex] and [tex]$Na_2CO_3$[/tex]
No reaction
4. [tex]$Fe(NO_3)_2 \text{ and}\ \ Na_2CO_3$[/tex]
[tex]$Fe^{2+}(aq)+2NO_3^-(aq)+2Na^+(aq)+CO_3^{2-}(aq) \rightarrow FeCO_3(s) + 2Na^+(aq) + 2NO_3^-(aq)[/tex]5. [tex]$Fe(NO_3)_2 \text{ and}\ \ Na_2CO_3$[/tex]
[tex]$Fe^{2+}(aq)+2NO_3^-(aq)+2Na^+(aq)+CO_3^{2-}(aq) \rightarrow FeCO_3(s) + 2Na^+(aq) + 2NO_3^-(aq)[/tex]6. [tex]$BaCl_2 \text{ and}\ \ KOH$[/tex]
[tex]$Ba^{+2}(aq)+2Cl^-(aq)+2K^+(aq)+2OH^-(aq) \rightarrow Ba(OH)_2(s) + 2K^+(aq) + 2Cl^-(aq)$[/tex]
7. [tex]$BaCl_2 \text{ and}\ \ KOH$[/tex]
[tex]$Ba^{+2}(aq)+2Cl^-(aq)+2K^+(aq)+2OH^-(aq) \rightarrow Ba(OH)_2(s) + 2K^+(aq) + 2Cl^-(aq)$[/tex]
What is the percent yield of a reaction producing 26g Iridium V Sulfate from 30g Lithium Sulfate and 30g Iridium V Carbonate?
What is [H⁺] in a 0.330 M solution of acrylic acid, CH₂CHCOOH (Ka = 3.16 × 10⁻⁵)?
Answer:
[H⁺] = 3.23x10⁻³ M
Explanation:
For a weak monoprotic acid, such as acrylic acid, we can calculate [H⁺] using the following formula if the solution concentration is significantly higher than the Ka:
[H⁺] = √(C * Ka)Where C is the weak acid concentration.
We input the data:
[H⁺] = [tex]\sqrt{0.330 M * 3.16x10^{-5}}[/tex]And solve for [H⁺]:
[H⁺] = 3.23x10⁻³ MWhich best describes the total mass of substances before and after a
combustion reaction?
A. The mass is the same because atoms are not created or
destroyed.
B. The mass is greater after the reaction because the number of
atoms increases.
C. The mass is the same because the molecules do not change.
D. The mass is less after the reaction because gases are produced.
Answer:
B. The mass is greater after the reaction because the number of
atoms increases.
determine the maximum amount of NaN03 that was produced during the experiment. Explain how you determined the amount
Answer:
9 moles of NaNO3 is obtained
Explanation:
The balanced chemical reaction equation for the reaction is;
Al(NO3)3 + 3NaCl-------> 3NaNO3 + AlCl3
Now, we have to determine the limiting reactant. The limiting reactant yields the least amount of NaNO3.
1 mole of Al(NO3)3 yields 3 moles of NaNO3
4 moles of Al(NO3)3 yields 4 * 3/1 = 12 moles of NaNO3
Also,
3 moles of NaCl yields 3 moles of NaNO3
9 moles of NaCl yields 9 * 3/3 = 9 moles of NaNO3
Hence, NaCl is the limiting reactant and 9 moles of NaNO3 is obtained.
9 moles of NaNO₃ is obtained.
Balanced chemical reaction:
[tex]Al(NO_3)_3 + 3NaCl-----> 3NaNO_3 + AlCl_3[/tex]
From the reaction, it is seen that the limiting reactant yields the least amount of NaNO₃.
1 mole of Al(NO₃)₃ yields 3 moles of NaNO₃
4 moles of Al(NO₃)₃ yields 4 * 3/1 = 12 moles of NaNO₃
Also,
3 moles of NaCl yields 3 moles of NaNO₃
9 moles of NaCl yields 9 * 3/3 = 9 moles of NaNO₃
Hence, NaCl is the limiting reactant and 9 moles of NaNO₃ is obtained.
Find more information about Balanced chemical reaction here:
brainly.com/question/15355912
identify the four quantum number for 3p5
Answer:
Four quantum numbers of unpaired electron of chlorine are n=3,l=1,m=0,s=+1/2.
Explanation:
Read about reverse osmosis and multistage flash distillation .Then identify at least three advantages and three
disadvantages for each process
Answer:
Meaning, Advantages & Disadvantages of - Osmosis, Multiflash Distillatiob
Explanation:
Osmosis is movement of solvent (like water) through semi permeable membrane (like living cell) into solution of higher solute concentration.Advantages - It assists equalising concentration of solute on two sides of membrane. Reverse Osmosis is used for efficient water softening, it is easy to maintain.
Disadvantages - It needs a lot of energy. A lot of pressure is required for deionisation. Water acidity level increases, as minerals get deionised.
Multistage flash distillation refers to desalination water distilling seawater, by flashing water portions in steams in various stages of concurrent heat exchangers.Advantages - Its Cost efficient , distillation uses waste heat. It has High gain output ratio. Quality of feedwater is less significant, compared to reverse osmosis.
Disadvantages - It has high operating cost in case of waste heat unavailability. High temperature imply high corrosion & scale formation.
2+4 help please i will fail 6th grade
Answer:
6
Explanation:
lol
On the basis of the information above, what is the approximate percent ionization of HNO2 in a 1.0 M HNO2 (aq) solution?
Answer:
The answer is "2%"
Explanation:
Equation:
[tex]HNO_2\ (aq) \leftrightharpoons H^{+} \ (aq) + NO_2^{-}\ (aq) \\\\\ K_a = 4.0\times \ 10^{-4}[/tex]
[tex]H^{+}=?[/tex]
Formula:
[tex]Ka = \frac{[H^{+}][NO_2^{-}]}{[HNO_2]}[/tex]
Let
[tex][H^{+}] = [NO_2^{-}] = x[/tex] at equilibrium
[tex]x^2 = (4.0\times 10^{-4})\times 1.0\\\\x = ((4.0\times 10^{-4})\times 1.0)^{0.5} = 2.0 \times 10^{-2} \ M\\\\[/tex]
therefore,
[tex][H^{+}] = 2.0\times 10^{-2} \ M = 0.02 \ M[/tex]
Calculating the % ionization:
[tex]= \frac{([H^{+}]}{[HNO_2])} \times 100 \\\\= \frac{0.02}{1}\times 100 \\\\= 2\%\\\\[/tex]
The approximate percent ionization of HNO₂ in a 1.0 M HNO₂ (aq) solution is 2%.
How we calculate the % ionization?% ionization of any compound will be calculated as follow:
% ionization = ([ion]/[acid or base]) ₓ 100
Given chemical reaction with ICE table will be represented as:
HNO₂(aq) → H⁺(aq) + NO₂⁻(aq)
initial 1 0 0
change -x +x +x
equilibrium 1-x x x
Equilibrium constant will be represented as:
Ka = [H⁺][NO₂⁻] / [HNO₂]
Acid dissociation constant for HNO₂ = 4×10⁻⁴
Putting all values in the above equation, we get
4×10⁻⁴ = x² / 1-x
Value of changeable quantity is very less, so we neglect from the concentration of HNO₂.
4×10⁻⁴ = x²
x = 2 × 10⁻²
So, the concentration of H⁺ ion = 2 × 10⁻²M
Now we put all these values in the % ionization equation, we get
% ionization = (0.02/1) × 100 = 2%
Hence , % ionization is 2%.
To know more about % ionization, visit the below link:
https://brainly.com/question/12198017
sodium bicarbonate =sodium carbonate + water + carbon dioxide gas
Answer: NaHCO3 = Na2CO3 + H2O + CO2
A certain reaction has an activation energy of 51.02 kJ/mol. At what Kelvin temperature will the reaction proceed 4.50 times faster than it did at 365 K
Answer:
[tex]T_2=400.73K[/tex]
Explanation:
From the question we are told that:
Activation energy [tex]E_a= 51.02 kJ/mol.=>51.02*10^3J/mol[/tex]
Reaction Ratio [tex]\triangle K=4.50[/tex]
Initial Temperature [tex]T_1=365K[/tex]
Generally the equation for Final Temperature [tex]T_2[/tex] is mathematically given by
[tex]log \triangle K=\frac{E_a}{2.303R}*(\frac{T_2-T_1}{T_1T_2})[/tex]
Where
[tex]R=Gas constant[/tex]
[tex]R =8.3143[/tex]
Therefore
[tex]log 4.50=\frac{51.2*10^3}{2.303*8.31432}*(\frac{T_2-365}{365*T_2})[/tex]
[tex]log 4.50=7.328*\frac{T_2-365}{T_2}[/tex]
[tex]0.0892=\frac{T_2-365}{T_2}[/tex]
[tex]0.0892T_2=T_2-365[/tex]
[tex]365=T_2-0.0892T_2[/tex]
[tex]365=0.91T_2[/tex]
[tex]T_2=\frac{365}{0.91}[/tex]
[tex]T_2=400.73K[/tex]
A sample of dry gas is found to occupy 3.650 L at 22.0°C and 740.0 mmHg. How many moles of gas are present?
will mark brainliest
Answer:
0.147
Explanation
PV/RT
A helium-filled balloon contains 0.16 mol He at 101 kPa and a temperature of 23°C. What is
the volume of the gas in the balloon?
V = 3.9 L
Explanation:
Given:
T = 23°C + 273 = 296K
n = 0.16 mol He
P = 101 kPa = 0.997 atm
R = universal gas constant = 0.08205 L-atm/mol-K
V = ?
Using the ideal gas law,
PV = nRT
V = nRT/P
= (0.16 mil He)(0.08205 L-atm/mol-K)(296K)/(0.997 atm)
= 3.9 L
According to the kinetic molecular theory which substances are made of particles ?
Answer:
The kinetic molecular theory of matter states that: Matter is made up of particles that are constantly moving. All particles have energy, but the energy varies depending on the temperature the sample of matter is in. This in turn determines whether the substance exists in the solid, liquid, or gaseous state.
Explanation:
Kinetic molecular theory explains the properties of solids, liquids and gases. As per this theory, matter is made of particles.
What is kinetic theory?
Kinetic molecular theory explains the properties of different states of matter. According to this theory matter is made up of particles. But the theory is mostly applies for gases.
According to kinetic theory of gases, gaseous substances consists of tiny spherical particles which are located apart from each other and hence no intermolecular force acts between them. They are in random motion and gains kinetic energy.
The kinetic energy of particles are temperature dependant and it increase as temperature rises. The collision between the particles and the particle and wall of the container in which they are will be elastic collision.
These concepts are applicable only for ideal gases. An less applicable for other states of matter.
To find more kinetic theory, refer here:
https://brainly.com/question/15357425
#SPJ6
Only electrons in the __________ orbital can form chemical bonds.
Answer:
Electrons in sigma bonds remain localized between two atoms. Sigma bond results from the formation of a molecular orbital by the end to end overlap of atomic orbitals. Electrons in pi bonds can become delocalized between more than two atoms. Pi bonds result from the formation of molecular orbital by side to side overlap of atomic orbitals.
What is the initial and final mass of the zinc and copper?
Answer:the final mass of copper is 3.84 g. There was an increase in mass of 1.84 g from the initial mass of 2.0 g.
Explanation:
Carbon-14 has a half-life of 5,730 years. It is used in "carbon dating" to determine the age of once living organisms. How much of a 144 gram sample of C-14 will remain after 17,190 years have past.
Answer:
18 grams
Explanation:
Because 17,190 yrs divided by the amount of years it takes for a half-life to occur is 3. So 3 half life’s happen, so you divide 144/2 once, equaling 72. You divide 72/2 again (another half-life) and you get 36. You then calculate the third half life by dividing 36/2 which equals 18 grams.
Answer:
5730
Explanation:
Answer to Founders Education:)
Be sure to answer all parts. Determine the electron-group arrangement, molecular shape, and ideal bond angle for the following molecule: SO3 Electron-group arrangement: V-shaped (bent) trigonal planar trigonal pyramidal seesaw Molecular shape: bent square pyramidal trigonal planar trigonal pyramidal Ideal bond angle: degrees
Answer:
trigonal planar
Explanation:
The molecule SO3 is of the type AX3. The molecule is symmetrical and non polar.
There are three regions of electron density in the molecule. This corresponds to a trigonal planar geometry. This means that the three oxygen atoms are arranged at the corners of a triangle. The bond angle is 120 degrees.
What is the IUPAC name for the following compound?
a. benzenecarbonitrile
b. benzenecyanide
c. phenylcyanide
d. cyanophenyl
Answer:
Option a. Benzenecarbonitrile
Explanation:
You are not providing the picture of the compound. However, I manage to find the picture of it, so I'm gonna answer this with the picture. Its attached here at the end.
As for the IUPAC name of this compound, it would be Benzenecarbonitrile, or simply, benzonitrile.
This compound has the molecular formula C₆H₅CN. It receives this name over the other ones, because this is a aromatic cyanide, and aromatic cyanide has nitriles behavior, (Strength of the nitrogen over the carbon), therefore, this group has priority over the whole molecule. As the principal chain is the benzene, the carbonitrile is the radical of the group, and when cyano groups are as radical and not as principal chains, it has a behavior of nitrile, and it's named as nitrile. therefore, option b, cannot be the name.
phenylcyanide is naming the phenyl as radical, but the benzene is the principal group in this compound, and the cyanide is the radical. It happens the same thing with cyanophenyl.
Hope this helps
what is the percent composition of calcium fluoride
Answer:
78.07
Explanation:
them seperatly is
Calcium Ca 51.333%
Fluorine F 48.667%
What is the pH of a house cleaning solution with molar hydrogen ion concentration [H+] of 1.0 x 10-8? please explain. Thank you so much!
[tex]pH = - log({H}^{ + } ) \\ pH = - log(1.0 \times {10}^{ - 8} ) \\ pH = 8[/tex]
pH is the measure of acidity and alkalinity of a solution. A pH value less than 7 means the solution is acidic. A pH value greater than 7 means the solution is basic. A pH value of 7 means the solutions is neutral.
Increasing the temperature increase the rate of a reaction by doing which of the following
Answer:
Increase in temperature increases the average kinetic energy of the reactant molecules, hence lowering the activation energy of the reaction.
PLEASE HURRY IM TIMED I WILL GIVE BRAINYST (if correct)
What is typical of a grassland? (Select all that apply.)
many trees
grass
wide, open areas
lakes
Answer:grass and wide open areas
Explanation: grassland- large open area of country covered with grass, especially one used for grazing.
Answer:
i needed the answer to this one too
Explanation:
How many moles of Oxygen atoms are contained in 45.9 mol CO2?
Answer:
Explanation:
10 moles of oxygen atoms.\ \textbf{b)} 91.8 moles of oxygen at
What is the mass, in grams, of a piece of aluminum if its temperature changes from 25.0 ºC to 31.5 ºC when it absorbs 42.2 joules of energy? The specific heat for aluminum is 0.89J/gºC
Answer:
m = 7.29 grams
Explanation:
Given that,
Initial temperature, T₁ = 25ºC
Final temperature, T₂ = 31.5ºC
The specific heat of the metal is 0.89 J/gºC.
We know that the heat released due to the change in temperature is given by :
[tex]Q=mc\Delta T\\\\m=\dfrac{Q}{c\Delta T}\\\\m=\dfrac{42.2 }{0.89\times (31.5-25)}\\\\m=7.29\ g[/tex]
So, the mass of the piece is equal to 7.29 grams.
If an alkene is protonated and the solvent is an alcohol rather than water, a reaction takes place that is very similar to acid-catalyzed hydration, but in the second step of the mechanism the alcohol functions as a nucleophile instead of water. Draw a plausible mechanism for the following process: What is the most likely sequence of steps in the mechanism
Answer:
Please find the structure of the mechanism in the attached file.
Explanation:
Many scientists are studying tiny particles called nanoparticles, Which best
describes how the scientists are probably trying to learn about these
particles?
Answer:
By experimenting
Explanation:
A balloon is inflated with 1.25 L of helium at a temperature of 298K. What is
the volume of the balloon when the temperature is 310K?
Answer:
What is
the volume of the balloon when the temperature is 310K?
can someone answer this
a solar eclipse only happens during a Moon
A. New
B. Crescent
C. Gibbous
D. Full
Answer:
A. New
Explanation: