For a cheese-lover, Burger King's Mac n' Cheetos are what type of product? (1pt)
Answer:
specialty product
Explanation:
For a cheese-lover, this product would be considered a specialty product. This is because they will actively seek out this product specifically because they love the ingredient/flavor of the product. For someone that loves cheese, products that are cheese flavored or contain cheese will be prioritized above all of the other products that do not contain cheese. This ultimately classifies the product as a specialty product because it is being sought after, even with other options around.
The Einstein Bagel Corp. offers a frequent buyer program whereby a consumer receives a stamp each time she purchases one dozen bagels for $5. After a consumer accrued 10 stamps, she receives one dozen bagels free. This offer is an unlimited offer, valid throughout the year. The manager knows her products are normal goods. Given this information, construct the budget set for a consumer who has $150 to spend on bagels and other goods throughout the year. Does Einstein’s frequent buyer program have the same effect on the consumption of its bagels that would occur if it simply lowered the price of one dozen bagels by 3 percent? Explain.
Alejandro, Inc. received the following information from its pension plan trustee concerning the operation of the company's defined-benefit pension plan for the year ended December 31, 2016. January 1, 2019 December 31, 2019 Fair value of pension plan assets $4,200,000 $4,500,000 Projected benefit obligation 4,800,000 5,160,000 Accumulated benefit obligation 840,000 1,020,000 Accumulated OCI – (Gains / Losses) -0- (90,000) The service cost component of pension expense for 2016 is $450,000 and the amortization of prior service cost due to an increase in benefits is $60,000. The settlement rate is 10% and the expected rate of return is 10%. What is the amount of pension expense for 2016?
Answer: $570,000
Explanation:
The amount of pension expense for 2016 is calculated below:
Service cost = $450,000
Add: Interest on projected benefit obligations = 10% × 4,800,000 = $480,000
Less: Expected return on plan assets = 10% × $4,200,000 = $420,000
Add: Amortization of prior service cost = $60,000
Pension expense = $570,000
Which examples demonstrate common qualifications for Quality Assurance careers? Check all that apply.
Claudia designs images and writes text for a product advertisement.
Harrison stands for long periods while checking the quality of a factory’s manufacturing process.
Mercedes inspects products on an assembly line to make sure they meet the company’s standards.
Lyle convinces customers to purchase defective products for a discounted price.
Arturo performs laboratory tests to check for pollution in the area near a factory.
Simone weighs and measures products to make sure they are the right size.
Answer:
2, 3, 6
Explanation:
Answer:
2,3,6 just did it on edge
Explanation:
Fatuma invests a total of $22,000 in two accounts. The first account earned a rate of return of 15% (after a year). However, the second account suffered a 7% loss in the same time period. At the end of one year, the total amount of money gained was $110.00. How much was invested into each account
Answer:
$7,500 was invested in the account that gained 15%, while $14,500 was invested in the account that lost 7%.
Explanation:
Given that Fatuma invests a total of $ 22,000 in two accounts, and the first account earned a rate of return of 15% after a year while the second account suffered a 7% loss in the same time period, and at the end of one year the total amount of money gained was $ 110.00, to determine how much was invested into each account, the following calculation must be performed:
11,000 x 0.15 - 11,000 x 0.07 = 880
5,000 x 0.15 - 17,000 x 0.07 = -440
8,000 x 0.15 - 14,000 x 0.07 = 220
7,000 x 0.15 - 15,000 x 0.07 = 0
7,500 x 0.15 - 14,500 x 0.07 = 110
Therefore, $ 7,500 was invested in the account that gained 15%, while $ 14,500 was invested in the account that lost 7%.
In order to sell a product at a profit, the product must be priced higher than the total cost to build the unit, plus period expenses and overhead. At the end of last year, Chester had their product Cake aimed at the Low End segment. Cake's production cost (labor + materials) last year was $14.07 ($5.89 unit labor cost and $8.18 unit material cost). Exclude possible inventory carrying costs. Assume period expenses and overhead total 50% of their production cost. What is the minimum price the product could have been sold for in the American region to cover the unit cost, period expenses, and overhead?
Answer:
Chester Cakes
The minimum price the product could have been sold for in the American region to cover the unit cost, period expenses, and overhead is:
= $21.11.
Explanation:
a) Data and Calculations:
Production cost:
Labor per unit = $5.89
Materials per unit 8.18
Total production cost $14.07
50% Overhead 7.04
Minimum price = $21.11
b) The minimum price for a unit of the cake includes the total variable production cost and the determined 50% overhead on the production cost to cover period expenses and other overhead costs.
Fischer Company uses 12,000 units of a part in its production process. The costs to make a part are: direct material, $15; direct labor, $27; variable overhead, $15; and applied fixed overhead, $32. Heath has received a quote of $60 from a potential supplier for this part. If Fischer buys the part, 75 percent of the applied fixed overhead would continue. Fischer Company would be better off by
Answer: $60,000
Explanation:
Total cost of producing the good internally:
= No. of units * (Direct material + Direct labor + Variable overhead + Applied fixed overhead)
= 12,000 * (15 + 27 + 15 + 32)
= $1,068,000
If the good is acquired externally for $60, they would still incur 75% of the applied fixed overhead:
= 12,000 * [ 60 + (75% * 32)]
= $1,008,000
If Fischer received from the supplier, they would save:
= 1,068,000 - 1,008,000
= $60,000
Fischer Company would be better off by $60,000 to buy the part.
What type of arrangement(s), if any, would avoid double taxation for Wendall's and Shirley's endeavor? Choose the best answer if the choices below.
Answer:
An s corporation or a limited liability company, but not a corporation.
Explanation:
According to your question, is An S corporation, a limited liability company, or a corporation? Therefore Option D is correct.
What is Liability?Accounts payable, wages and taxes are examples of current obligations, which are sums owed for ongoing costs. Current obligations will also include payments on long-term debt due in the following year.
Liabilities include things like -
a bank loan
a mortgage loan
Payment due to suppliers (accounts payable)
Paid wages
tax debt
Liabilities are listed on a company's balance sheet. The entire number of liabilities must match the difference between the total amount of assets and the total amount of equity, according to the accounting equation.
Hence, An S corporation, a limited liability company, or a corporation is correct according to the question.
To know more about Liability follow the link.
https://brainly.com/question/27843625
#SPJ6
Your Question was incomplete but most probably your question was.
What type of arrangement(s), if any, would avoid double taxation for Wendall's and Shirley's endeavors? Choose the best answer if the choices below.
A. A corporation
B. A limited liability company
C. An S corporation
D. An S corporation, a limited liability company, or a corporation
E. An S corporation or a limited liability company, but not a corporation
Companies should take the expectations of the broader community into
account when making decisions.
True or false
difference between transport business and drink business
Answer:
a transport business uses (preferably semi's) any vehicles to transport one item from one place to another. a drink business is a place/product ( drinks (soft or alcoholic) and you sell them to make a profit
transport business is both cheaper and easy to set up and run.
a stock analyst wants to use a dividend pricing model to value stock. the analyst believes will pay its first dividend in exactly 15 years, and she is guessing that the dividend will be $10.00 per share at that time. the analyst assumes that dividends will grow by 5% per year going forward after year 15. the required return to hold is estimated to be 12% per year. based on these assumptions, what is the intrinsic value of stock today
Answer:
P0 = $27.4044 rounded off to $27.40
Explanation:
The constant growth model of dividend discount model (DDM) can be used to calculate the price of the stock today. DDM calculates the price of a stock based on the present value of the expected future dividends from the stock. The formula for price today under constant growth DDM is,
P0 = D0 * (1+g) / (r - g)
Where,
D0 * (1+g) is the dividend expected in Year 1 or next year g is the constant growth rate in dividends r is the discount rate or required rate of return
To calculate the price of the stock today, we firsts need to calculate the price of the stock in year 15 and discount it back to today's value.
As we can see that to calculate the price of the stock today, we use dividend that is expected for the next period or Year 1. Thus to calculate the price of the stock in Year 15, we will use the dividend that will be expected in Year 16.
P15 = D15 * (1+g) / (r - g)
P15 = 10 * (1+0.05) / (0.12 - 0.05)
P15 = $150 per share
To calculate the price of this stock today, we must discount the Year 15 price to today's price.
P0 = P15 / (1+r)^15
P0 = 150 / (1+0.12)^15
P0 = $27.4044 rounded off to $27.40
Local planning teams are often called planning .
Answer:Commissions
Explanation:an instruction, command, or duty given to a person or group of people.
Sheffield Company had sales in 2019 of $1,842,400 on 65,800 units. Variable costs totaled $1,184,400, and fixed costs totaled $498,000. A new raw material is available that will decrease the variable costs per unit by 20% (or $3.60). However, to process the new raw material, fixed operating costs will increase by $93,000. Management feels that one-half of the decline in the variable costs per unit should be passed on to customers in the form of a sales price reduction. The marketing department expects that this sales price reduction will result in a 5% increase in the number of units sold. (a) Prepare a projected CVP income statement for 2020, assuming the changes have not been made. SHEFFIELD COMPANY CVP Income Statement Total Per Unit $ $ $ $
Answer:
Assuming that no changes happened, 2020 sales and expenses should be similar to 2019's:
Total Per unit
Total sales $1,842,400 $28
Variables costs ($1,184,400) ($18)
Contribution margin $658,000 $10
Fixed costs ($498,000) ($7.57)
Operating income $160,000 $2.43
Evan is single and has AGI of $277,300 in 2020. His potential itemized deductions before any limitations for the year total $52,300 and consist of the following: Medical expenses (before the AGI limitation) $29,000 Interest on home mortgage 8,700 State income taxes 9,500 Real estate taxes 3,600 Charitable contributions 2,500 After all necessary adjustments are made, what is the amount of itemized deductions Evan may claim
Answer:
$24,402.50
Explanation:
Medical expenses can be deducted only if they are above 7.5% of your AGI:
$277,300 x 7.5% = $20,797.50
Medical deductions = $29,000 - $20,797.50 = $8,202.50
Evan can deduct $8,700 in mortgage interests
Total deductions for state and local taxes for a single filer = $5,000
Charitable contributions are also deductible = $2,500
total deductions = $8,202.50 + $8,700 + $5,000 + $2,500 = $24,402.50
During March, Hanks Manufacturing started and completed 30,000 units. In beginning work in process, there were 5,000 units 60 percent complete with respect to conversion costs. Materials are added at the beginning of the process. In EWIP there were 10,000 units 40 percent complete for conversion costs. Using FIFO, the equivalent units of materials and conversion costs are, respectively:
Answer:
Equivalent units
Materials= 40,000 units
Conversion= 36,000 units
Explanation:
Equivalent units are notional whole units which represent incomplete work and are used to apportion cost between work progress and completed work
Equivalent units = Degree of work done(%) × units of inventory
Conversion cost
Item equivalent units
Opening inventory 40% × 5,000 = 2,000
Fully worked units 100% × 30,000= 30,000
Closing inventory 40%× 10,000= 4,000
Total equivalent unit 36,000
Notes
The following notes explains the computation of the items of equivalent unit for conversion cost:
1. DOC for opening inventory is 40% i.e 100%-60%. Remember that 60% work has been done in the previous period, so the balance is to be done in this current period
2. Fully work represent the units of inventory introduced in the current period and completed in the same period. Meaning 100% work was achieved in the period.
3. Closing work is only 40% completed. This represent work started this period but not yet completed.
Material cost
Item equivalent units
Opening inventory 0% × 5,000 = 0
Fully worked units 100% × 30,000= 30,000
Closing inventory 100%× 10,000= 10,000
Total equivalent unit 40,000
Notes
The following notes explains the computation of the items of equivalent unit for Material cost:
1. DOC for opening inventory is 0% i.e 100%-1000%. Remember that materials are added at the beginning. Hence all the materials required for the opening inventory had been added in the previous period
2. Fully work represent the units of inventory introduced in the current period and completed in the same period. Meaning 100% materials was added in the period.
3. All the materials required for the closing inventory were added in this period, hence, 100% degree of completion was used
Equivalent units
Materials= 40,000 units
Conversion= 36,000 units
24. The following information is available for Geek Manufacturing Company. -- Direct materials price standard is $4.50 per pound. -- Direct materials quantity standard is seven pounds per finished unit. -- Budgeted production is 25,000 finished units. -- 200,000 pounds of direct materials were purchased for $925,000. -- 200,000 pounds of direct materials were used in production. -- 25,600 finished units of product were produced. What is the direct materials price variance
Answer:
Material price variance = $25,000 Unfavorable
Explanation:
A material price variance occurs where materials are purchased at a price either lower or higher than the standard price. A favorable variance is recorded where the actual total cost of materials is lower that the standard cost. While an adverse variance implies the opposite
$
200,000 pounds should have cost (200,000× $4.50)= 900,000
but did cost 925,000
Material price variance 25,000Unfavorable
Material price variance = $25,000 Unfavorable
A company's unadjusted trial balance shows a debit balance in the allowance for doubtful accounts. This means that a. The company has written off more accounts receivable during the period than were accounted for in the opening balance of the allowance. b. The company must recognize bad debt expense at least as great as the unadjusted debit balance of the allowance. c. The company has written off too many accounts receivable and should reassess its write-off policy. d. Both a and b above are correct.
Answer:
d. Both a and b above are correct.
Explanation:
In the case when the company unadjusted trial balance reflect a debit balance of allowance for doubtful debts so this represent that the company would have more written off account receivable that would be shown in the beginning balance of the allowance. Also the company should record the bad debt expense as more as the debit balance of the non-adjusted allowance
Hence, the last option is correct
Which of the following increases the supply of foreign exchange?
a.
Investments of capital in foreign countries
b.
Increases in tourism and export of local goods
c.
Import of goods and services to a country
d.
Demand for foreign goods and services
Burger Prince buys top-grade ground beef for $1.05 per pound. A large sign over the entrance guarantees that the meat is fresh daily. Any leftover meat is sold to the local high school cafeteria for 75 cents per pound. Four hamburgers can be prepared from each pound of meat. Burgers sell for 70 cents each. Labor, overhead, meat, buns, and condiments cost 40 cents per burger. Demand is normally distributed with a mean of 385 pounds per day and a standard deviation of 30 pounds per day. What daily order quantity is optimal
7. Gold Company has budgeted the following costs for the production of its only product: Direct Materials $75,000 Direct Labor 50,000 Variable indirect production costs 25,000 Fixed indirect production costs 27,500 Variable selling and administrative costs 7,500 Fixed selling and administrative costs 15,000 Total Costs $200,000 Gold Company wants a profit of $100,000, and expects to produce 2,500 units. The market price is $125 per unit. What is the target cost per unit of the product
Answer:
$68 = unitary variable cost
Explanation:
Giving the following formula:
Gold Company wants a profit of $100,000
Production= 2,500 units
Selling price= $125
Fixed indirect production costs 27,500
Fixed selling and administrative costs 15,000
To calculate the target total unitary variable cost, we need to use the following formula:
number of units sold= (desired profit + fixed costs) / (selling price - unitary variable cost)
2,500= (100,000 + 27,500 + 15,000) / (125 - unitary variable cost)
312,500 - 2,500unitary variable cost = 142,500
170,000 = 2,500unitary variable cost
$68=unitary variable cost
Discovering the process of distribution of commonly used items is quite interesting and opens eyes to several new processes and careers! Your group will be in charge of dissecting the process of distribution related to any of the following items:
*Televisions
*Milk in Cartons
*Laundry Detergent
*Refrigerators
*Lumber
*Pineapples
*Video Games
*Watches
*Coffee
*Shoes
*Football Helmets
*Pencils
Narrow your research by selecting a brand or company that manufactures or distributes one of the products listed above. For example, not all shoes come from the same country, manufacturer, distributor, or are distributed alike. Select a brand of shoes you are familiar with and begin the search. The goal is to trace the process from production to consumer.
Answer and Explanation:
The distribution of laundry detergent can happen in two ways. The first way, occurs with a distribution of the factory direct to the retailers of a country. These retailers, receive the detergents, store large inventories and send them to smaller stores, within a given region. This type of distribution has a lower economic cost, which causes the detergent to be sold at lower prices.
The second form of distribution occurs with the use of intermediaries between factories and retailers. These intermediaries are the wholesalers, they receive the product from the factories forming large stocks, which will be distributed to retailers, who in turn, will distribute the product to stores. This process makes the product more expensive, making the price higher.
Pinnocle Corporation has provided the following data from its activity-based costing system: Activity Cost Pool Total Cost Total Activity Assembly $ 1,533,840 77,000 machine-hours Processing orders 91,065 1,950 orders Inspection 139,788 1,980 inspection-hours The company makes 430 units of product S78N a year, requiring a total of 660 machine-hours, 50 orders, and 10 inspection-hours per year. The product's direct materials cost is $51.25 per unit and its direct labor cost is $13.06 per unit. The product sells for $124.30 per unit. According to the activity-based costing system, the product margin for product S78N is: Multiple Choice $10,313.50. $25,795.70. $11,942.50. $9,607.50.
Answer:
Product margin= $9,607.5
Explanation:
First, we need to calculate the allocation rates:
Assembly= 1,533,840 / 77,000= $19.92 per machine-hour
Processing orders= 91,065 / 1,950= $46.7 per order
Inspection= 139,788 / 1,980= $70.6 per inspection-hour
Now, we need to allocate overhead:
Allocated MOH= Estimated manufacturing overhead rate* Actual amount of allocation base
Assembly= 19.92*660= 13,147.2
Processing orders= 46.7*50= 2,335
Inspection= 70.6*10= 706
Total= $16,188.2
Finally, the product margin for product S78N:
Product margin= 430* (124.3 - 51.25 - 13.06) - 16,188.2
Product margin= $9,607.5
Sheffield Corporation makes a mechanical stuffed alligator that sings the Martian national anthem. The following information is available for Sheffield Corporation's anticipated annual volume of 524,000 units. Per Unit Total Direct materials $ 6 Direct labor $11 Variable manufacturing overhead $17 Fixed manufacturing overhead $3,144,000 Variable selling and administrative expenses $17 Fixed selling and administrative expenses $1,572,000 The company has a desired ROI of 25%. It has invested assets of $31,440,000. Compute the total cost per unit. Total cost per unit $enter the total cost per unit
Answer:
Total cost per unit using absorption costing = $34
Explanation:
Absorption costing is method of costing where overheads are charged to units produced using volume-based bases. e.g machine hours, labour hours e.t.c. Units are valued using full cost per unit
Full cost per unit= Direct material cost + direct labor cost + Variable production overhead + Fixed production overhead
Fixed production overhead = Budgeted overhead/Budgeted production units
unit cost for 2,000 units
Fixed production overhead = $3,144,000/524,000= 6
Total cost = 6 + 11+ 17 = 34
Total cost per unit using absorption costing = $34
Using a spreadsheet computer software program, construct a supply chain finance model to determine the redelivery/rehandling cost, lost sales, invoice deduction cost, and net income for the following two cases: a. On-time delivery increases from 90 percent to 96 percent with a 10 percent increase in transportation cost. b. Order fill rate decreases from 95 percent to 90 percent with inventory reduced by 10 percent.
The following totals for the month of April were taken from the payroll records of Kingbird Company. Salaries $144000 FICA taxes withheld 11020 Income taxes withheld 30000 Medical insurance deductions 5400 Federal unemployment taxes 380 State unemployment taxes 2590 The journal entry to record the monthly payroll on April 30 would include a debit to Salaries and Wages Expense for $144000. debit to Salaries and Wages Expense for $97580. credit to Salaries and Wages Payable for $144000. debit to Salaries and Wages Payable for $144000.
Answer:
debit to Salaries and Wages Expense for $144000
Explanation:
Based on the information given we were told that the company salaries was the amount of $144,000 which means that The journal entry to record the monthly payroll on April 30 would include :
April 30
Debit to Salaries for $144,000
Credit Wages Expense for $144000
(To record monthly payroll)
Jalissa owns a sandwich shop and wants to expand her business. She has talked to other local shop owners for ideas about how to do this and a few suggested adopting an online presence. How could e-commerce help Jalissa expand her business?
A: It can attract customers from a wider area.
B: It can increase her revenue by allowing her increase prices.
C: It can decrease her security costs.
D: It can eliminate the need for workers in her shop.
Answer: it can attract customers from a wider area.
Explanation:
You decide that structural changes must be made immediately at Holden Evan to deal with the problems caused by the three SBU marketing teams. What should you do? Select an option from the choices below and click Submit. Merge the independent procurement teams of each SBU into a single procurement division serving all product lines. Create a cross-department team to investigate in depth how the problems arose and to offer suggestions on how to deal with them. Merge the three marketing teams of each SBU into a single marketing division serving all product lines.
Answer:
One of the required structural changes that must be made immediately at Holden Evan to deal with the problems caused by the three SBU marketing teams is:
Merge the three marketing teams of each SBU into a single marketing division serving all product lines.
Explanation:
The marketing department is not a product-based team. Therefore, a marketing team should not be tied to just one SBU. The SBU structure can be continued. But the combination of the marketing teams into a single group creates synergy, avoids effort duplication, reduces competitiveness among the various teams, and above all, helping the group' brand managers to utilize accumulated resources, knowledge,and information of the entire marketing organization for the benefit of the different SBUs.
The management of Penfold Corporation is considering the purchase of a machine that would cost $270,000, would last for 5 years, and would have no salvage value. The machine would reduce labor and other costs by $60,000 per year. The company requires a minimum pretax return of 12% on all investment projects. Click here to view Exhibit 7B-1 and Exhibit 7B-2 to determine the appropriate discount factor(s) using the tables provided. The net present value of the proposed project is closest to (Ignore income taxes.): (Round your intermediate calculations and final answer to the nearest whole dollar amount.) Multiple Choice $(11,700) $(29,886) $(77,514) $(53,700)
Answer:
$(53,700)
Explanation:
The computation of the net present value is given below:
Given that
Initial investment is $270,000
Time period is 5 years
Annual cash flows is $60,000 per year
Discounting rate is 12%
Now the net present value is
Year cash flows discount rate at 12% Present value
1-5 $60,000 3.605 $216,300
Less:
Initial investment $270,000
Net present value ($53,700)
On April 30, the end of the first month of operations, Joplin Company prepared the following income statement, based on the absorption costing concept: Joplin Company Absorption Costing Income Statement For the Month Ended April 30 Sales (5,600 units) $145,600 Cost of goods sold: Cost of goods manufactured (6,400 units) $115,200 Inventory, April 30 (900 units) (16,200) Total cost of goods sold (99,000) Gross profit $46,600 Selling and administrative expenses (24,740) Operating income $21,860 If the fixed manufacturing costs were $23,040 and the fixed selling and administrative expenses were $12,120, prepare an income statement according to the variable costing concept. Round all final answers to whole dollars.
Answer:
See below
Explanation:
Preparation of variable costing income statement
Sales $145,600
Variable cost of goods sold
$92,160
Less:
Inventory, April 30
($12,960)
Total variable cost of goods sold
$79,200
Manufacturing margin
$66,400
Variable selling and administrative expenses ($12,620)
Contribution margin $66,580
Less:
Fixed costs $23,040
Fixed selling and administrative expenses $12,120
Total fixed costs ($35,160)
Income from operations $31,420
Workings
•Variable cost of goods manufactured
= Total manufacturing cost - Fixed manufacturing cost
= $115,200 - $23,040
= $92,160
• Inventory at April 30
Calculate first, manufacturing cost per unit
= Variable cost of goods manufactured / Units manufactured
= $92,160/6,400 units
= $14.4
Therefore, Inventory at April 30
= $14.4 × 900 units
= $12,960
• Variable selling and administrative cost = Total selling and administrative cost - Fixed selling and administrative costs
= $24,740 - $12,120
= $12,620
Henderson Electronics Corporation manufactures and sells FM radios. Information on the prior year's operations (sales and production Model A1) is presented below: Sales price per unit $30 Costs per unit: Direct material 7 Direct labor 4 Overhead (50% variable) 6 Selling costs (40% variable) 10 Production in units 10,000 Sales in units 9,500 Refer to Henderson Electronics Corporation. Assume that the remaining Model A1 radios can be sold through normal channels or to a foreign buyer for $6 per unit. If sold through regular channels, the minimum acceptable price will be
Answer:
the minimum acceptable price is $4
Explanation:
The computation of the minimum acceptable price is shown below:
Here the minimum acceptable price would be considered as a variable selling cost i.e. calculated below:
= Selling cost × variable percentage
= $10 × 40%
= $4
hence, the minimum acceptable price is $4
The same would be considered and relevant too