Q3)In the Stripping section of the fractionation distillation column, a liquid mixture of benzene-toluene is to be distilled in a flash distillation tower at 101.3 kPa pressure. The feed of 100 kg mol/h is liquid and it contains 45 mol % benzene and 55 mol % toluene and enters at 54 C A distillate containing 95 mol % benzene and 5 mol % toluene The reflux ratio is 41. The average heat capacity of the feed is 140 kJ/kg mol. K and the average latent hear 20000 k/kg mal. The slope of the q-line equation 8.3 The equilibrium data for this system is given in this Figure. The bottoms containing 10 mol % benzene and 58 kg molh are liquid a) Calculate the amount of the liquid before the boiler? b) Calculate the amount of the returned vapor to the distillation column from the boiler? c) Calculate the number of theoretical trays in the stripping section where these trays are equivalent to the packed bed height of column 1.95? d) Calculate the value of g for the q-line section? e) Calculate the height equivalent for the stripping section?

The force exerted to keep the car moving at a constant speed is 2540 N.To drive 108 km at a speed of 28.0 m/s, approximately 1.89 gallons of gasoline will be used.

(a) To find the force exerted to keep the car moving at constant speed, we need to calculate the useful work done by the force. The work done can be obtained by multiplying the distance traveled by the force acting in the direction of motion.

The distance traveled is given as 108 km, which is equal to 108,000 meters. The force is responsible for 30% of the useful work, so we divide the total work by 0.30. The energy content of gasoline is 1.30 × 10^8 J per gallon. Thus, the force exerted to keep the car moving at a constant speed is:

Work = (Distance traveled × Force) / 0.30

Force = (Work × 0.30) / Distance traveled

Force = (1.30 × 10^8 J/gallon × 2.10 gallons × 0.30) / 108,000 m

Force ≈ 2540 N

(b) If the required force is directly proportional to speed, we can use the concept of proportionality to find the number of gallons used. Since the force is directly proportional to speed, we can set up the following ratio:

Force₁ / Speed₁ = Force₂ / Speed₂

Let's solve for Force₂:

Force₂ = (Force₁ × Speed₂) / Speed₁

Force₂ = (2540 N × 28.0 m/s) / 30.0 m/s

Force₂ ≈ 2360 N

To find the number of gallons used, we divide the force by the energy content of gasoline:

Gallons = Force₂ / (1.30 × [tex]10^{8}[/tex] J/gallon)

Gallons ≈ 2360 N / (1.30 × [tex]10^{8}[/tex] J/gallon)

Gallons ≈ 0.0182 gallons

Therefore, approximately 0.0182 gallons of gasoline will be used to drive 108 km at a speed of 28.0 m/s.

Learn more about distance here ;

brainly.com/question/29769926

#SPJ11

The wavelength of the ocean waves, with a wave speed of 5.6 m/s and a time period of 110 s, is 616 meters.

To find the wavelength of the ocean waves, we can use the formula:

Wavelength (λ) = Wave speed (v) * Time period (T)

Given:

Wave speed (v) = 5.6 m/s

Time period (T) = 110 s

Substituting these values into the formula, we get:

Wavelength (λ) = 5.6 m/s * 110 s

Wavelength (λ) = 616 m

Therefore, the wavelength of the ocean waves is 616 meters.

To know more about wavelength, click here:

brainly.com/question/32101149

#SPJ11

The true statement regarding a resistor is connected in parallel to a resistor in an existing circuit while voltage remains constant is that the resistance increases, and current and power decrease. The correct answer is C.

When a resistor is connected in parallel to another resistor in an existing circuit, while the voltage remains constant, the resistance will increases, and current and power decrease.

In a parallel circuit, the total resistance decreases as more resistors are added. However, in this case, a new resistor is connected in parallel, which increases the overall resistance of the circuit. As a result, the total current flowing through the circuit decreases due to the increased resistance. Since power is calculated as the product of current and voltage (P = VI), when the current decreases, the power also decreases. Therefore, resistance increases, while both current and power decrease. The correct answer is C.

To learn more about resistor visit: https://brainly.com/question/31322988

#SPJ11

He needs 7,666 turns. Given that the primary winding has 2,000 turns and the voltage changes from 120 V to 230 V, we can calculate the required number of turns in the secondary winding.

In a transformer, the ratio of the number of turns in the primary winding to the number of turns in the secondary winding is proportional to the voltage ratio. This relationship is described by the formula:

[tex]\frac{V_p}{V_s} =\frac{N_p}{N_s}[/tex]

Where [tex]V_p[/tex] and [tex]V_s[/tex] represent the primary and secondary voltages, respectively, and [tex]N_p[/tex] and [tex]N_s[/tex] represent the number of turns in the primary and secondary windings, respectively. Rearranging the formula, we get:

[tex]N_s=\frac{V_s}{V_p} * N_p[/tex]

Substituting the given values, we have:

[tex]N_s=\frac{230 V}{120 V} * 2000 turns[/tex]

Simplifying the expression, we find:

[tex]N_s= 3.833 * 2000 turns[/tex]

Calculating the result, we get:

[tex]N_s[/tex] ≈ 7,666 turns

Therefore, Jorge will need approximately 7,666 turns in the secondary winding of his transformer for his appliance to operate properly in Peru.

Learn more about transformer here:

https://brainly.com/question/23125430

#SPJ11

(a) At t = 4.0 s, the displacement of the body in simple harmonic motion is approximately -4.327 m.

To find the displacement, we substitute the given time value (t = 4.0 s) into the equation x = (5.1 m) cos[(2π rad/s)t + π/5 rad]:

x = (5.1 m) cos[(2π rad/s)(4.0 s) + π/5 rad] ≈ (5.1 m) cos[25.132 rad + 0.628 rad] ≈ (5.1 m) cos[25.760 rad] ≈ -4.327 m.

(b) At t = 4.0 s, the velocity of the body in simple harmonic motion is approximately 8.014 m/s.

The velocity can be found by taking the derivative of the displacement equation with respect to time:

v = dx/dt = -(5.1 m)(2π rad/s) sin[(2π rad/s)t + π/5 rad].

Substituting t = 4.0 s, we have:

v = -(5.1 m)(2π rad/s) sin[(2π rad/s)(4.0 s) + π/5 rad] ≈ -(5.1 m)(2π rad/s) sin[25.132 rad + 0.628 rad] ≈ -(5.1 m)(2π rad/s) sin[25.760 rad] ≈ 8.014 m/s.

(c) At t = 4.0 s, the acceleration of the body in simple harmonic motion is approximately -9.574 m/s².

The acceleration can be found by taking the derivative of the velocity equation with respect to time:

a = dv/dt = -(5.1 m)(2π rad/s)² cos[(2π rad/s)t + π/5 rad].

Substituting t = 4.0 s, we have:

a = -(5.1 m)(2π rad/s)² cos[(2π rad/s)(4.0 s) + π/5 rad] ≈ -(5.1 m)(2π rad/s)² cos[25.132 rad + 0.628 rad] ≈ -(5.1 m)(2π rad/s)² cos[25.760 rad] ≈ -9.574 m/s².

(d) At t = 4.0 s, the phase of the motion is approximately 25.760 radians.

The phase of the motion is determined by the argument of the cosine function in the displacement equation.

(e) The frequency of the motion is 1 Hz.

The frequency can be determined by the coefficient in front of the time variable in the cosine function. In this case, it is (2π rad/s), which corresponds to a frequency of 1 Hz.

(f) The period of the motion is 1 second.

The period of the motion is the reciprocal of the frequency, so in this case, the period is 1 second (1/1 Hz).

learn more about displacement here:

https://brainly.com/question/30087445

#SPJ11

The shift in the wavelength of the photon emitted by the hydrogen atom transitioning from an n=2, l=1, m₂=-1 state to an n=1, l=0, ml=0 ground state in a magnetic field with a magnitude of 2.50 T is approximately 0.00136 nm.

In the presence of a magnetic field, the energy levels of the hydrogen atom undergo a shift known as the Zeeman effect. The shift in wavelength can be calculated using the formula Δλ = (ΔE / hc), where ΔE is the energy difference between the initial and final states, h is the Planck constant, and c is the speed of light.

The energy difference can be obtained using the formula ΔE = μB * m, where μB is the Bohr magneton and m is the magnetic quantum number. By plugging in the known values and calculating Δλ, the shift in wavelength is determined to be approximately 0.00136 nm.

To learn more about magnetic field click here: brainly.com/question/30331791

#SPJ11

The current flowing in the circuit can be determined by using Ohm's Law, which states that the current (I) is equal to the ratio of the potential difference (V) across the circuit to the resistance (R) of the circuit.

In this case, since the power (P) is also given, we can use the equation P = IV, where I is the current and V is the potential difference. By rearranging the equation, we can solve for the current I.

Ohm's Law states that V = IR, where V is the potential difference, I is the current, and R is the resistance. Rearranging the equation, we have I = V/R.

Given that the potential difference V is 26.8 volts, and the power P is 7.8 watts, we can use the equation P = IV to solve for the current I. Rearranging this equation, we have I = P/V.

Substituting the values of P and V into the equation, we get I = 7.8/26.8. Evaluating this expression, we find that the current I is approximately 0.29 amperes (rounded to two decimal places).

To learn more about circuits click here:

brainly.com/question/12608516

#SPJ11

The kinetic energy of the electron moving at 0.645 c is approximately 0.157 MeV, rounded to three significant figures.

To calculate the kinetic energy of an electron moving at 0.645 c, we can use the relativistic formula for kinetic energy:

KE = (γ - 1) * m₀ * c²

The kinetic energy (KE) of an electron moving at 0.645 times the speed of light (c) can be determined using the Lorentz factor (γ), which takes into account the relativistic effects, the rest mass of the electron (m₀), and the speed of light (c) as a constant value.

Speed of the electron (v) = 0.645 c

Rest mass of the electron (m₀) = 0.511 MeV/c²

Speed of light (c) = 299,792,458 m/

To calculate the Lorentz factor, we can use the formula:

γ = 1 / sqrt(1 - (v/c)²)

Substituting the values into the formula:

γ = 1 / sqrt(1 - (0.645 c / c)²)

= 1 / sqrt(1 - 0.645²)

≈ 1 / sqrt(1 - 0.416025)

≈ 1 / sqrt(0.583975)

≈ 1 / 0.764118

≈ 1.30752

Now, we can calculate the kinetic energy by applying the following formula:

KE = (γ - 1) * m₀ * c²

= (1.30752 - 1) * 0.511 MeV/c² * (299,792,458 m/s)²

= 0.30752 * 0.511 MeV * (299,792,458 m/s)²

≈ 0.157 MeV

Therefore, the kinetic energy of the electron moving at 0.645 c is approximately 0.157 MeV, rounded to three significant figures.

Learn more about kinetic energy at: https://brainly.com/question/8101588

#SPJ11

BJTs (Bipolar Junction Transistors) and MOSFETs (Metal-Oxide-Semiconductor Field-Effect Transistors) are two types of transistors commonly used in electronic circuits. They share the similarity of being capable of functioning as amplifiers and switches. However, they differ in their mode of operation and characteristics.

One difference is that BJTs are current-controlled devices, while MOSFETs are voltage-controlled devices. This means that BJTs are better suited for small-signal applications, whereas MOSFETs excel in high-power scenarios, efficiently handling large currents with minimal losses. BJTs have lower input resistance, leading to voltage drops and power losses when used as switches. In contrast, MOSFETs boast high input resistance, making them more efficient switches, particularly in high-frequency applications.

MOSFETs, preferred in integrated circuits, offer high input impedance and low on-resistance, making them ideal for high-frequency and power-efficient applications. Their compact size further suits integrated circuits with limited space. Additionally, MOSFETs exhibit fast switching speeds, making them highly suitable for digital applications.

To learn more about transistors and their applications, click this link:

brainly.com/question/31675260

#SPJ11

Marxism and Environmentalism pose serious philosophical challenges to Liberalism. Private property and class are two of the major areas that Marxism poses a challenge to Liberalism, while private property and conservation are two of the major areas that Environmentalism poses a challenge to Liberalism.

Marxism poses a challenge to Liberalism on private property and class grounds. According to Marxism, private ownership of property should be abolished. All resources, including land, should be owned and managed by the state for the benefit of all. Marxism believes that class struggle and inequality are both inherent features of capitalism and that a socialist society can only be achieved by eliminating private property and class differences. Marxism believes that individuals should be classified and treated according to their skills, and that the government should be responsible for managing the economy and allocating resources based on need. Environmentalism challenges Liberalism in terms of private property and conservation.  As a result, environmentalists argue that conservation and preservation should be given priority over economic development.

To know more about eliminating visit:

https://brainly.com/question/29807794

#SPJ11

The net current flow in a semiconductor occurs primarily through the conduction band, where electrons have accessible energy levels and can move freely.

A semiconductor is a material that exhibits electrical conductivity between that of a conductor (such as metals) and an insulator (such as non-metals) at room temperature. When it comes to current flow in semiconductors, it primarily occurs through the movement of electrons within certain energy bands.

In a semiconductor, there are two key energy bands relevant to current flow: the valence band and the conduction band. The valence band is the energy band that is completely occupied by the valence electrons of the semiconductor material. These valence electrons are tightly bound to their respective atoms and are not free to move throughout the crystal lattice. As a result, the valence band does not contribute to the net current flow.

On the other hand, the conduction band is the energy band above the valence band that contains vacant energy states. Electrons in the conduction band have higher energy levels and are relatively free to move and participate in current flow.

When electrons in the valence band gain sufficient energy from an external source, such as thermal energy or an applied voltage, they can transition to the conduction band, leaving behind a vacant space in the valence band known as a "hole."

These mobile electrons in the conduction band, as well as the movement of holes in the valence band, contribute to the net current flow in a semiconductor.

However, it's important to note that a completely filled band, such as the valence band, does not carry a net current in a semiconductor.

This is because all the electrons in the valence band are already in their lowest energy states and are not free to move to other energy levels. The valence band represents the energy level at which electrons are bound to atoms within the crystal lattice.

In summary, the net current flow in a semiconductor occurs primarily through the conduction band, where electrons have accessible energy levels and can move freely.

A completely filled band, like the valence band, does not contribute to the net current because the electrons in that band are already occupied in their lowest energy states and are stationary within the crystal lattice.

Learn more about semiconductor at: https://brainly.com/question/1918629

#SPJ11

The mass of the object can be calculated using Newton's second law of motion, which states that the force acting on an object is equal to the mass of the object multiplied by its acceleration.

Given that a 10 N force causes the object to accelerate at 5 m/s^2, we can use the formula:

Force = mass * acceleration

Rearranging the formula, we have:

mass = Force / acceleration

Substituting the given values, we have:

mass = 10 N / 5 m/s^2

Simplifying the equation, we find:

mass = 2 kg

Therefore, the mass of the object is 2 kg.

To learn more about acceleration, click here:  https://brainly.com/question/2303856

#SPJ11

You would need to combine at least 10 of these 42Ω resistors in series or parallel to achieve a total resistance of 42Ω and a power dissipation of at least 12.2W.

To determine the minimum number of 42Ω resistors needed to achieve a resistance of 42Ω and a power dissipation of at least 12.2W, we can calculate the power dissipation of a single resistor and then divide the target power by that value.

Resistance of each resistor, R = 42Ω

Maximum power dissipation per resistor, P_max = 1.3W

Target power dissipation, P_target = 12.2W

First, let's calculate the power dissipation per resistor:

P_per_resistor = P_max = 1.3W

Now, let's determine the minimum number of resistors required:

Number of resistors, N = P_target / P_per_resistor

N = 12.2W / 1.3W ≈ 9.38

Since we can't have a fractional number of resistors, we need to round up to the nearest whole number. Therefore, the minimum number of 42Ω resistors required is 10.

Learn more about resistors at https://brainly.com/question/29231593

#SPJ11

A transverse sinusoidal wave on a wire is moving in the -x-direction. Its speed is 30.0 m/s, and its period is 16.0 ms. At 0, a coloured mark on the wire at [tex]x_o[/tex] has a vertical position of 2.00 cm and is moving down with a speed of 1.20 m/s.

(a) The amplitude of the wave is 0.02 m.

(b) The phase constant is π radians.

(c) The maximum transverse speed of the wire is 30.0 m/s.

(d) The wave function for the wave is y(x, t) = 0.02 sin(13.09x + 392.7t + π).

(a) To determine the amplitude (A) of the wave, we need to find the maximum displacement of the coloured mark on the wire. The vertical position of the mark at t = 0 is given as 2.00 cm, which can be converted to meters:

2.00 cm = 0.02 m

Since the wave is sinusoidal, the maximum displacement is equal to the amplitude, so the amplitude of the wave is 0.02 m.

(b) The phase constant (Φ) represents the initial phase of the wave. We know that at t = 0, the mark at x = [tex]x_o[/tex] is moving down with a speed of 1.20 m/s. This indicates that the wave is in its downward motion at t = 0. Therefore, the phase constant is π radians (180 degrees) because the sinusoidal function starts at its maximum downward position.

(c) The maximum transverse speed of the wire corresponds to the maximum velocity of the wave. The velocity of a wave is given by the product of its frequency (f) and wavelength (λ):

v = f λ

We can find the frequency by taking the reciprocal of the period:

f = 1 / T = 1 / (16.0 × 10⁻³ s) = 62.5 Hz

The velocity (v) of the wave is given as 30.0 m/s. Rearranging the equation v = f λ, we can solve for the wavelength:

λ = v / f = (30.0 m/s) / (62.5 Hz) = 0.48 m

The maximum transverse speed of the wire is equal to the velocity of the wave, so it is 30.0 m/s.

(d) The wave function for the wave can be written as:

y(x, t) = A sin( kx + ωt + Φ)

where A is the amplitude, k is the wave number, ω is the angular frequency, and Φ is the phase constant.

We have already determined the amplitude (A) as 0.02 m and the phase constant (Φ) as π radians.

The wave number (k) can be calculated using the equation:

k = 2π / λ

Substituting the given wavelength (λ = 0.48 m), we find:

k = 2π / 0.48 = 13.09 rad/m

The angular frequency (ω) can be calculated using the equation:

ω = 2πf

Substituting the given frequency (f = 62.5 Hz), we find:

ω = 2π × 62.5 ≈ 392.7 rad/s

Therefore, the wave function for the wave is:

y(x, t) = 0.02 sin(13.09x + 392.7t + π)

To know more about wave function here

https://brainly.com/question/32239960

#SPJ4

Distance is a scalar quantity that refers to the total length traveled by an object along a particular path.

The answers are:

a) The displacement of the body during the time interval is 10.816 m.

b) The distance traveled by the body during the time interval is also 10.816 m.

Time is a fundamental concept in physics that measures the duration or interval between two events. It is a scalar quantity and is typically measured in units of seconds (s). Time allows us to understand the sequence and duration of events and is an essential component in calculating various physical quantities such as velocity, acceleration, and distance traveled.

Velocity refers to the rate at which an object's position changes. It is a vector quantity that includes both magnitude and direction. Velocity is expressed in units of meters per second (m/s) and can be positive or negative, depending on the direction of motion.

(a) To find the displacement of the body during the time interval, we can use the following equation of motion:

[tex]v^2 = u^2 + 2as[/tex]

Where:

v = final velocity of the body = 10.4 m/s

u = initial velocity of the body = 5.20 m/s

a = acceleration = 3.75 m/s²

s = displacement of the body

Substituting the given values into the equation:

[tex](10.4)^2 = (5.20)^2 + 2 * 3.75 * s\\108.16 = 27.04 + 7.5 * s\\81.12 = 7.5 * s\\s = 10.816 m[/tex]

Therefore, the displacement of the body during the time interval is 10.816 m.

(b) To find the distance traveled by the body during the time interval, we need to consider both the forward and backward motion. Since the body starts with an initial velocity of 5.20 m/s and ends with a final velocity of 10.4 m/s, it undergoes a change in velocity.

The total distance traveled can be calculated by considering the area under the velocity-time graph. Since the body undergoes acceleration, the graph would be a trapezoid.

The distance traveled (D) can be calculated using the equation:

[tex]D = (1/2) * (v + u) * t[/tex]

Where:

v = final velocity of the body = 10.4 m/s

u = initial velocity of the body = 5.20 m/s

t = time interval

Since the acceleration is constant, the time interval can be calculated using the equation:

[tex]v = u + at10.4 = 5.20 + 3.75 * t5.20 = 3.75 * tt = 1.3867 s[/tex]

Substituting the values into the equation for distance:

[tex]D = (1/2) * (10.4 + 5.20) * 1.3867D = 10.816 m[/tex]

Therefore, the distance traveled by the body during the time interval is also 10.816 m.

For more details regarding velocity, visit:

https://brainly.com/question/30559316

#SPJ4

The pressure of the hydrogen gas, when its volume is changed to 12 L at the same temperature, is 18 atm.

To solve this problem, we can use Boyle's Law, which states that the pressure and volume of a gas are inversely proportional when temperature remains constant. Mathematically, Boyle's Law can be expressed as:

P₁V₁ = P₂V₂

Where P₁ and V₁ are the initial pressure and volume, and P₂ and V₂ are the final pressure and volume.

Given that the initial volume (V₁) is 2 L, the initial pressure (P₁) is 9 atm, and the final volume (V₂) is 12 L, we can plug these values into the equation:

(9 atm) * (2 L) = P₂ * (12 L)

Simplifying the equation:

18 atm·L = 12 P₂ L

Dividing both sides of the equation by 12 L:

18 atm = P₂

Therefore, The pressure of the hydrogen gas, when its volume is changed to 12 L at the same temperature, is 18 atm.

Learn more about hydrogen here:

https://brainly.com/question/24433860

#SPJ11

The point sources detected by the Arecibo radio telescope could be as close together as 425.3 light years at the distance of the Andromeda galaxy.

Step 1:

The point sources detected by the Arecibo radio telescope could be as close together as 425.3 light years at the distance of the Andromeda galaxy.

Step 2:

To determine how close together the point sources could be at the distance of the Andromeda galaxy, we need to consider the wavelength of the radio waves detected by the Arecibo radio telescope and the distance to the Andromeda galaxy.

Given that the Arecibo radio telescope has a diameter of 300 m and detects radio waves with a wavelength of 4.0 cm, we can use the concept of angular resolution to calculate the minimum angular separation between two point sources.

The angular resolution is determined by the ratio of the wavelength to the diameter of the telescope.

Angular resolution = wavelength / telescope diameter

= 4.0 cm / 300 m

= 4.0 x 10⁻² m / 300 m

= 1.33 x 10⁻⁴ rad

Next, we need to convert the angular separation to the physical distance at the distance of the Andromeda galaxy, which is approximately 2,000,000 light years away. To do this, we can use the formula:

Physical separation = angular separation x distance

Physical separation = 1.33 x 10⁻⁴ rad x 2,000,000 light years

Converting the physical separation from light years to the appropriate units:

Physical separation = 1.33 x 10⁻⁴ rad x 2,000,000 light years x 9.461 x 10¹⁵ m / light year

Calculating the result:

Physical separation = 251,300 ly

Therefore, the point sources could be as close together as 425.3 light years at the distance of the Andromeda galaxy.

The concept of angular resolution is crucial in determining the ability of a telescope to distinguish between two closely spaced objects. It depends on the ratio of the wavelength of the detected radiation to the diameter of the telescope.

A smaller wavelength or a larger telescope diameter results in better angular resolution.

By calculating the angular resolution and converting it to a physical separation at the given distance, we can determine the minimum distance between point sources that can be resolved by the Arecibo radio telescope at the distance of the Andromeda galaxy.

Learn more about point sources

brainly.com/question/29679451

#SPJ11

Jacky is a nuclear engineer who is currently on a submarine off the coast of North Korea. If the pressure of the water outside of Jacky's submarine is 32 atm, how deep is her submarine the density of sea water is 1,025 kg/m³.

The pressure of a liquid is directly proportional to its depth in the liquid. Furthermore, the higher the density of the fluid, the higher the pressure exerted. We'll use the following formula :P = ρgh Where:P = pressure in pascalsρ = density of the fluid in kg/m³g = acceleration due to gravity, which is 9.8 m/s²h = height of the fluid column in meters

The pressure at any depth h below the surface is given by the formula:

P = Patm + ρghWhere:Patm = atmospheric pressureρ = density of the fluidg = acceleration due to gravity,

which is 9.8 m/s²h = depth of the liquid column The pressure outside the submarine is given as 32 atm. This is equivalent to

:P = 32 atm × 1.013 × 10⁵ Pa/atm = 3.232 × 10⁶ PaWe will use the formula ,P = Patm + ρgh

to determine the depth of the submarine.

Patm = atmospheric pressure =

1 atm = 1.013 × 10⁵ Paρ = density of the sea water = 1025 kg/m³g =

acceleration due to gravity = 9.8 m/s²h = depth of the submarine

By substituting the values,

we get3.232 × 10⁶ Pa = 1.013 × 10⁵ Pa + (1025 kg/m³ × 9.8 m/s² × h)Solving for h we get h = 277.23

the depth of the submarine is 277.23 m Option D is the correct answer.

To know more about engineer visit:

https://brainly.com/question/31140236

#SPJ11

By using Poiseuille's law,the viscosity (η) of blood is approximately [tex]3.77 * 10^{-3} Ns/m^2[/tex]

To calculate the viscosity η of blood, we can use Poiseuille's law, which relates the flow rate of a fluid through a tube to its viscosity, pressure drop, and tube dimensions.

Poiseuille's law states:

Q = (π * ΔP *[tex]r^4[/tex]) / (8 * η * L)

Where:

Q = Flow rate of blood through the capillary

ΔP = Pressure drop across the capillary

r = Radius of the capillary

η = Viscosity of blood

L = Length of the capillary

Given:

Length of the capillary (L) = 2.00 mm = 0.002 m

Diameter of the capillary = 5.00 μm = [tex]5.00 * 10^{-6} m[/tex]

Pressure drop (ΔP) = 2.65 kPa = [tex]2.65 * 10^3 Pa[/tex]

First, we need to calculate the radius (r) using the diameter:

r = (diameter / 2) = [tex]5.00 * 10^{-6} m / 2 = 2.50 * 10^{-6} m[/tex]

Substituting the values into Poiseuille's law:

Q = (π * ΔP *[tex]r^4[/tex]) / (8 * η * L)

We know that the blood takes 1.55 s to pass through the capillary, which means the flow rate (Q) can be calculated as:

Q = Length of the capillary / Time taken = 0.002 m / 1.55 s

Now, we can rearrange the equation to solve for viscosity (η):

η = (π * ΔP *[tex]r^4[/tex]) / (8 * Q * L)

Substituting the given values:

η =[tex](\pi * 2.65 * 10^3 Pa * (2.50 * 10^{-6} m)^4) / (8 * (0.002 m / 1.55 s) * 0.002 m)[/tex]

Evaluating this expression:

η ≈ [tex]3.77 * 10^{-3} Ns/m^2[/tex]

Therefore, the viscosity (η) of blood is approximately [tex]3.77 * 10^{-3} Ns/m^2[/tex]

To know more about Poiseuille's law, here

brainly.com/question/31595067

#SPJ4

The 100 g mass must be placed 5 cm to the left of the fulcrum to establish static equilibrium.

To establish static equilibrium, the net torque acting on the meter stick must be zero. Torque is calculated as the product of the force applied and the distance from the fulcrum.

Given:

Mass at the 10 cm mark: 50 g

Mass to be placed: 100 g

Let's denote the distance of the 100 g mass from the fulcrum as "x" (in cm).

The torque due to the 50 g mass can be calculated as:

Torque1 = (50 g) * (10 cm)

The torque due to the 100 g mass can be calculated as:

Torque2 = (100 g) * (x cm)

For static equilibrium, the net torque must be zero:

Torque1 + Torque2 = 0

Substituting the given values:

(50 g) * (10 cm) + (100 g) * (x cm) = 0

Simplifying the equation:

500 cm*g + 100*g*x = 0

Dividing both sides by "g":

500 cm + 100*x = 0

Rearranging the equation:

100*x = -500 cm

Dividing both sides by 100:

x = -5 cm

Therefore, the 100 g mass must be placed 5 cm to the left of the fulcrum to establish static equilibrium.

The net torque is zero since the torque due to the 50 g mass (50 g * 10 cm) is equal in magnitude but opposite in direction to the torque due to the 100 g mass (-100 g * 5 cm).

Learn more about static equilibrium:

https://brainly.com/question/3386704

#SPJ11

An ideal gas consists of molecules that can move freely and independently. The total internal energy of an ideal gas can be determined based on the number of degrees of freedom (f) of each molecule.

In this case, the total internal energy of the ideal gas is given by the formula:

U = f * n * R * T / 2

Where:
U is the total internal energy of the gas,
f is the number of degrees of freedom of each molecule,
n is the number of moles of gas,
R is the gas constant, and
T is the temperature of the gas.

The factor of 1/2 in the formula arises from the equipartition theorem, which states that each degree of freedom contributes (1/2) * R * T to the total internal energy.

For example, let's consider a diatomic gas molecule like oxygen (O2). Each oxygen molecule has 5 degrees of freedom: three translational and two rotational.

If we have a certain number of moles of oxygen gas (n) at a given temperature (T), we can calculate the total internal energy (U) of the gas using the formula above.

So, for a diatomic gas like oxygen with 5 degrees of freedom, the total internal energy of the gas would be:

U = 5 * n * R * T / 2

This formula holds true for any ideal gas, regardless of the number of degrees of freedom. The total internal energy of an ideal gas is directly proportional to the number of degrees of freedom and the temperature, while being dependent on the number of moles and the gas constant.

To know more about molecules visit:

https://brainly.com/question/32298217

#SPJ11

The average force applied by the engine if the mass of the car and the drag racer is 850 kg is approximately 22,950 Newtons.

To calculate the average force applied by the engine, we can use Newton's second law of motion, which states that the force (F) is equal to the mass (m) multiplied by the acceleration (a):

F = m × a

In this case, the acceleration can be calculated using the equation for average acceleration:

a = (final velocity - initial velocity) / time

The equation of motion to calculate time is:

distance = (initial velocity × time) + (0.5 × acceleration × time²)

We know the distance (400 m), initial velocity (0 m/s), and final velocity (147 m/s). We can rearrange the equation to solve for time:

400 = 0.5 × a × t²

Substituting the given values, we have:

400 = 0.5 × a × t²

Using the formula for average acceleration:

a = (final velocity - initial velocity) / time

a = (147 - 0) / t

Substituting this into the distance equation:

400 = 0.5 × [(147 - 0) / t] × t²

Simplifying the equation:

400 = 0.5 × 147 × t

800 = 147 × t

t = 800 / 147

t = 5.4422 seconds (approximately)

Now that we have the time, we can calculate the average acceleration:

a = (final velocity - initial velocity) / time

a = (147 - 0) / 5.4422

a ≈ 27 m/s² (approximately)

Finally, we can calculate the average force applied by the engine using Newton's second law:

F = m × a

F = 850 kg × 27 m/s²

F = 22,950 N (approximately)

Learn more about force -

brainly.com/question/12785175

#SPJ11

Yes, the center of mass of the Earth-Moon system is located inside the Earth.

Earth-Moon system can be defined as a two-body system, where both Earth and  Moon orbit around their common center of mass. However, because  Earth is much more massive than the Moon, the center of mass is much closer to the center of the Earth.

The center of mass of the Earth-Moon system is located 1,700 kilometers (1,056 miles) beneath the Earth's surface. Suppose,  if you were to draw an imaginary line connecting the center of the Earth to the center of the Moon, the center of mass will be closer to the Earth's center.

From space, the Earth-Moon system seems as if the Moon is orbiting around the Earth, but actually, both the Earth and the Moon are in motion around to their common center of mass.

Hence, this statement is right that the center of mass of the Earth/moon system is inside the Earth.

Learn more about orbit here:
brainly.com/question/32355752

#SPJ4

The unknown resistance value (Rx) in ohms for a balanced Wheatstone bridge with L2 = 33.3cm and L3 = 66.7cm; with R1=250 ohms is 500.

According to Wheatstone bridge,Thus, the Wheatstone bridge is balanced.In the balanced Wheatstone bridge, we can say that the voltage drop across the two resistors L2 and L3 is equal. Now, the voltage drop across the resistor L2 and L3 can be calculated as follows

We can equate both the above expressions because the voltage drop across the two resistors L2 and L3 is equal.Therefore, the unknown resistor value (Rx) in ohms for a balanced Wheatstone bridge with L2 = 33.3cm and L3 = 66.7cm; with R1=250 ohms is 500.

To know more about resistance visit:

brainly.com/question/13691672

#SPJ11

Answer:

The equivalent resistance (REQ) of the given circuit is 14 ohms.

Explanation:

To find the equivalent resistance (REQ) in the given circuit, we can start by simplifying the circuit step by step.

First, let's simplify the series combination of R₁ and R₄:

R₁ and R₄ are in series, so we can add their resistances:

R₁ + R₄ = 8 ohms + 2 ohms = 10 ohms

The simplified circuit becomes:

R₁ R₄

1 w

10Ω

Next, let's simplify the parallel combination of R₂ and R₃:

R₂ and R₃ are in parallel, so we can use the formula for calculating the equivalent resistance of two resistors in parallel:

1/REQ = 1/R₂ + 1/R₃

Substituting the values:

1/REQ = 1/8 ohms + 1/8 ohms = 1/8 + 1/8 = 2/8 = 1/4

Taking the reciprocal on both sides:

REQ = 4 ohms

The simplified circuit becomes:

R₁ R₄

1 w

10Ω

REQ

4Ω

Now, let's simplify the series combination of R₅ and REQ:

R₅ and REQ are in series, so we can add their resistances:

R₅ + REQ = 10 ohms + 4 ohms = 14 ohms

The final simplified circuit becomes:

R₁ R₄

1 w

10Ω

REQ

4Ω

R₅

10Ω

14Ω

Therefore, the equivalent resistance (REQ) of the given circuit is 14 ohms.

Learn more aboutresistance here:

brainly.com/question/32301085

#SPJ11

The Doppler effect refers to the change in frequency or pitch of a wave due to the motion of the source or observer.

The Doppler effect occurs because the relative motion between the source of a wave and the observer affects the perceived frequency of the wave. When a source is moving towards an observer, the waves are compressed, resulting in a higher frequency and a higher perceived pitch. Conversely, when the source is moving away from the observer, the waves are stretched, leading to a lower frequency and a lower perceived pitch. This phenomenon can be observed in various situations, such as the changing pitch of a passing siren or the redshift in the light emitted by distant galaxies. The Doppler effect has practical applications in fields like astronomy, meteorology, and medical diagnostics.

To learn more about Doppler, Click here: brainly.com/question/15318474?

#SPJ11

Given information: Initial speed of the ball = 7.47 m/s Angle of the ball with the horizontal = 69.0°Height of the ball from the ground at the maximum height = 2.20 m. To determine the horizontal and vertical components of velocity, we can use the following formulas: V₀x = V₀ cos θV₀y = V₀ sin θ

Where, V₀ is the initial velocity, θ is the angle with the horizontal. So, let's calculate the horizontal and vertical components of velocity:

V₀x = V₀ cos θ= 7.47 cos 69.0°= 2.31 m/sV₀y = V₀ sin θ= 7.47 sin 69.0°= 6.84 m/s

As we know that when the ball reaches its maximum height, its vertical velocity becomes zero (Vf = 0).We can use the following kinematic formula to determine the time it takes for the ball to reach its maximum height:

Vf = Vo + a*t0 = Vf / a

Where, a is the acceleration due to gravity (-9.81 m/s²), Vf is the final velocity, Vo is the initial velocity, and t is the time. i.e.,

a = -9.81 m/s².Vf = 0Vo = 6.84 m/st = Vf / a= 0 / (-9.81)= 0 s

Hence, it took 0 seconds for the ball to reach its maximum height. At the maximum height, we can use the following kinematic formula to determine the displacement (distance travelled) of the ball:

S = Vo*t + (1/2)*a*t²

Where, S is the displacement, Vo is the initial velocity, a is the acceleration, and t is the time.

Vo = 6.84 m/st = 0s S = Vo*t + (1/2)*a*t²= 6.84*0 + (1/2)*(-9.81)*(0)²= 0 m

The displacement of the ball at the maximum height is 0 m.

Therefore, the word of the ball when it reaches 2.20 m above the installation site will be 2.20 m (the height of the ball from the ground at the maximum height).

To know more about components visit:

https://brainly.com/question/23746960

#SPJ11

The torque about the origin is [tex]\(-8.1\hat{k}\)[/tex].

The torque about x=-1.3m, y=2.4m is [tex]\(-11.04\hat{k}\)[/tex].

To find the torque about a point, we can use the formula:

[tex]\[ \text{Torque} = \text{Force} \times \text{Lever Arm} \][/tex]

where the force is the applied force vector and the lever arm is the position vector from the axis of rotation to the point of application of the force.

(a) Torque about the origin:

The position vector from the origin to the point of application of the force is given by [tex]\(\vec{r} = 3.0\hat{i} + 0\hat{j}\)[/tex] (since the point is at x=3.0m, y=0).

The torque about the origin is calculated as:

[tex]\[ \text{Torque} = \vec{F} \times \vec{r} \]\\\\\ \text{Torque} = (1.3\hat{i} + 2.7\hat{j}) \times (3.0\hat{i} + 0\hat{j}) \][/tex]

Expanding the cross product:

[tex]\[ \text{Torque} = 1.3 \times 0 - 2.7 \times 3.0 \hat{k} \]\\\\\ \text{Torque} = -8.1\hat{k} \][/tex]

Therefore, the torque about the origin is [tex]\(-8.1\hat{k}\)[/tex].

(b) Torque about x=-1.3m, y=2.4m:

The position vector from the point (x=-1.3m, y=2.4m) to the point of application of the force is given by [tex]\(\vec{r} = (3.0 + 1.3)\hat{i} + (0 - 2.4)\hat{j} = 4.3\hat{i} - 2.4\hat{j}\)[/tex].

The torque about the point (x=-1.3m, y=2.4m) is calculated as:

[tex]\[ \text{Torque} = \vec{F} \times \vec{r} \]\\\ \text{Torque} = (1.3\hat{i} + 2.7\hat{j}) \times (4.3\hat{i} - 2.4\hat{j}) \][/tex]

Expanding the cross product:

[tex]\[ \text{Torque} = 1.3 \times (-2.4) - 2.7 \times 4.3 \hat{k} \]\\\ \text{Torque} = -11.04\hat{k} \][/tex]

Therefore, the torque about x=-1.3m, y=2.4m is [tex]\(-11.04\hat{k}\)[/tex].

Sketch:

Here is a sketch representing the situation:

The sketch represents the general idea and may not be to scale. The force vector and position vector are shown, and the torque is calculated about the specified points.

Know more about torque:

https://brainly.com/question/30338175

#SPJ4

The mass of the ball, if the change in momentum was 7.2 kgm/s is 0.6 kg. The average force exerted on the ball is  205.71 N.

2.1

To determine the mass of the ball, we can use the equation:

Change in momentum = mass * velocity

Given that the change in momentum is 7.2 kgm/s, and the initial velocity is 12 m/s, we can solve for the mass of the ball:

7.2 kgm/s = mass * 12 m/s

Dividing both sides of the equation by 12 m/s:

mass = 7.2 kgm/s / 12 m/s

mass = 0.6 kg

Therefore, the mass of the ball is 0.6 kg.

2.2

To find the average force exerted on the ball, we can use the equation:

Average force = Change in momentum / Time

Given that the change in momentum is 7.2 kgm/s, and the time of contact with the wall is 35 ms (or 0.035 s), we can calculate the average force:

Average force = 7.2 kgm/s / 0.035 s

Average force = 205.71 N

Therefore, the average force exerted on the ball is 205.71 N.

To learn more about force: https://brainly.com/question/12785175

#SPJ11

The linear momentum acquired by the proton is 2.75 x 10^(-21) kg·m/s. The radius of the circle along which the proton moves is 3.92 x 10^(-2) meters.

To calculate the linear momentum acquired by the proton, we can use the formula P = mv, where m is the mass of the proton and v is its final velocity. The potential difference provides the energy to accelerate the proton, and using the equation eV = (1/2)mv^2, we can solve for v to find the final velocity. Plugging in the given values and solving for v, we get v = 9.19 x 10^6 m/s. Substituting this value into the linear momentum equation, we find P = 2.75 x 10^(-21) kg·m/s.

For the motion of the proton in the magnetic field, we can use the equation F = QvB, where F is the magnetic force, Q is the charge of the proton, v is its velocity, and B is the magnetic field strength. Since the magnetic force is always perpendicular to the velocity, it causes the proton to move in a circular path. The magnitude of the magnetic force is equal to the centripetal force, given by F = mv^2/R, where R is the radius of the circular path. Equating the two force equations and solving for R, we find R = mv / (Q B). Plugging in the given values, we get R = 3.92 x 10^(-2) meters.

To learn more about linear momentum click here:

brainly.com/question/30767107?

#SPJ11