Answer:
the cause of variation gravity
Answer:
Heavier Objects Don't Hit the Ground First
Please help me I don’t get how to do it!!! A ray of light has a wavelength
433 nm in water (n = 1.33). What
is its wavelength in a vacuum?
(Remember, the wavelength is longer in
a vacuum.)
(Unit = nm)
Answer:
The wavelength of the light in a vacuum is 575.89 nm
Explanation:
The given parameter in the are;
The wavelength of the ray of light in water, λ₁ = 433 nm
The refractive index of water, n₁ = 1.33
The relationship between wavelength, λ, and refractive index, 'n', is presented as follows;
λ₁·n₁ = λ₂·n₂
Where;
λ₁ and λ₂ are the wavelength of the wave within the two mediums
n₁ and n₂ are the respective refractive indices of the mediums
The refractive index of vacuum, n₂ = 1
Let λ₂ represent the wavelength of light in vacuum
Therefore, we have;
1.33 × 433 nm = 1 × λ₂
∴ λ₂ = 1.33 × 433 nm/1 = 575.89 nm
Therefore, the wavelength in a vacuum, λ₂ = 575.89 nm
Answer: 576
Explanation: Its correct for acellus!
caves are formed from?
Answer:
caves are mainly formed by water or in some other cases limestone.
Which of these waves probably has the largest wavelength?
Answer:
I think it's the last one
Explanation:
good luck
Answer: The last one...8 waves per second
Explanation:
2. You push a 12.3-kg shopping cart with a force of 10.1 N.
(a) What is the acceleration of the cart?
(b) If the cart starts from rest, how far does it move in 2.50 s?
Plz answer quick
Answer:
Explanation:
The important part about this problem is the acceleration, which you must find by using
F = ma,
where F is the force applied,
m is the mass,
and a is the acceleration.
F = ma
10.1 N = (12.3 kg)a
a = 0.8211 m/s^2
Now use the kinematics equations.
d = vot + (1/2)at^2
where d is the distance moved,
vo is the initial velocity (0),
a is the acceleration,
and t is the time.
d = vot + (1/2)at^2
d = (0 m/s)(2.5 s) + (1/2)(0.8211 m/s^2)(2.5 s)^2
d = 2.57 m
a. The acceleration of the cart, is 0.821 [tex]m/s^2[/tex].
b. The car moved a distance of 30.63 meters starting from rest.
Given the following data:
Mass of shopping cart = 12.3 kgForce = 10.1 NInitial velocity, u = 0 m/s (since the cart is starting from rest). Time, t = 2.50 seconds.a. To find the acceleration of the cart, we would apply Newton's Second Law of Motion:
Mathematically, Newton's Second Law of Motion is given by this formula;
[tex]Acceleration = \frac{Force}{Mass}[/tex]
Substituting the given values, we have;
[tex]Acceleration = \frac{10.1}{12.3}[/tex]
Acceleration = 0.821 [tex]m/s^2[/tex]
Therefore, the acceleration of the cart, is 0.821 [tex]m/s^2[/tex].
b. To find the distance covered by the shopping cart, we would use the second equation of motion.
Mathematically, the second equation of motion is given by the formula;
[tex]S = ut + \frac{1}{2} at^2[/tex]
Where:
S is the distance covered. u is the initial velocity. a is the acceleration. t is the time measured in seconds.Substituting the values into the formula, we have;
[tex]S = 0(2.5) + \frac{1}{2} (9.8)(2.5)^2\\\\S = 0 + 4.9(6.25)[/tex]
Distance, S = 30.63 meters.
Therefore, the car moved a distance of 30.63 meters starting from rest.
Read more: https://brainly.com/question/8898885
Please help me please and you will get the brainlist
Answer:
4. Force = 178.6 Newton.
5. Acceleration = 2.28 m/s².
6. Force = 178.6 Newton.
Explanation:
4. Given the following data;
Acceleration = 3.8 m/s²
Mass = 47kg
Force = mass * acceleration
Force = 47 * 3.8
Force = 178.6 Newton.
5. Given the following data;
Force = 785N
Mass = 345kg
Acceleration = force/mass
Acceleration = 785/345
Acceleration = 2.28 m/s²
6. Given the following data;
Acceleration = 6m/s²
Force = 32N
Mass =force/acceleration
Mass = 32/6
Mass = 5.33 kilograms
The increasing speed of a falling object is caused by
gravity
force
mass
speed
(pick one)
Answer:
gravity
Explanation:
Technically it would be mass or speed because it depends on ow big or small it is, but if you break it down it will be due to gravity as it gets stronger
A book that weighs 0.35 kilograms is kept on a shelf that’s 2.0 meters above the ground. A picture frame that weighs 0.5 kilograms will have the same gravitational potential energy as the book when it’s raised to a height of ____
meters.
(Use PE = m × g × h, where g = 9.8 N/kg. )
Answer:
E p = m · g · h
E p ( book ) = 0.35 kg · 9.8 m/s² · 2 m = 6.86 J
E p ( picture frame ) = 6.86 J
( same gravitational potential energy as the book )
6.86 = 0.5 · 9.8 · h
6.86 = 4.9 h
h = 6.86 : 4.9
h = 1.4 m
Answer: 1.4 M
What are two properties that lead to ElectroMagnetic Interactions? please help this is due very soon!!!
Answer:
Electric charge. A fundamental property that leads to the electromagnetic interactions among particles that make up matter.
A physics teacher is reheating her leftover pizza lunch in the very old teacher breakroom microwave. The microwave is so old that it doesn't even turn the food as it cooks. When the teacher takes her food out and eats it, she discovers that parts of the pizza are scalding hot, while other parts are still very cold. She explains to the students that a microwave works by producing standing waves that result in heating. She asks the students to explain why some parts of the pizza are hot while others are still cold. Below are their responses:
Answer: At the antinodes of a standing wave, the wave is shaking very rapidly, causing those parts of the pizza to get hot. At the nodes, the wave is not shaking much at all, causing those parts of the pizza to stay cold."
Explanation:
antinodes vibrate and are the opposite of nodes which are stationary.
Some parts of the pizza are hot while others are still cold. Because the antinodes of a standing wave shake very quickly, causing the hot spots on the pizza to appear.
What are the differences between nodes and antinodes?The fact that there are locations along the medium that appear to be standing still is a feature of every standing wave pattern.
The term "node" refers to these sites, which are also known as "points of no displacement." Other sites along the medium are subjected to vibrations with substantial positive and negative displacements.
During each vibrational cycle of the standing wave, these are the locations that experience the most displacement. These points are termed "antinodes" because they are the polar opposites of nodes.
The antinodes of a standing wave shake very quickly, causing the hot spots on the pizza to appear. The wave isn't moving very much at the nodes, therefore those areas of the pizza stay cold."
Hence some parts of the pizza are hot while others are still cold.
To learn more about antinodes refer to the link;
https://brainly.com/question/2608876
What is the smallest particle of an element that still retains of that element
A.compound
B.molecule
C.atom
D.mixture
Answer:
atom
Explanation:
the first guy who gave link this is for you:
we cannot use links in brainly
Thankyou.
resistors - defibrillator - resistance - increases - energy - decreases -capacitors.
1_______________ is the difficulty of passing electric current through a conductor. It 2_______________ as the wire becomes longer and 3_________________ as the wire becomes wider.
4________________ are electric devices used to transform energy into heat or light.
5________________ are similar to batteries. They can store 6_______________. But they charge up quicker and can discharge the all the energy faster than a second. A 7_________________ is an example of a capacitor function.
Answer:
1. Resistance.
2. Decreases.
3. Increases.
4. Defibrillator.
5. Capacitors.
6. Energy.
7. Resistor.
Explanation:
Resistance is the difficulty of passing electric current through a conductor. It increases as the wire becomes longer and decreases as the wire becomes wider.
Defibrillator are electric devices used to transform energy into heat or light.
Capacitors are similar to batteries. They can store energy. But they charge up quicker and can discharge all the the energy faster than a second. A resistor is an example of a capacitor function.
Compared to Earth's moon, the moons of Mars are
equal in size.
larger in size.
made of different substances.
smaller in size.
if a person can jump maximum along distance of 3m ,on the earth how far could be jump on the moon where acceleration due to gravity is 1÷16 of that on the earth
Answer:
The person can jump 48 m on the Moon
Explanation:
The question parameters are;
The maximum long jump distance of a person on Earth, [tex]R_{max}[/tex] = 3 m
The acceleration due to gravity on the Moon = 1 ÷ 16 of that on Earth
The distance the person can jump on the Moon is given as follows;
A person performing a jump across an horizontal distance on Earth (under gravitational force) follows the path of the motion of a projectile
The horizontal range, [tex]R_{max}[/tex], of a projectile motion is found by using the following formula
[tex]R_{max} = \dfrac{u^2}{g}[/tex]
Where;
g = The acceleration due to gravity = 9.8 m/s²
Therefore, we have;
[tex]R_{max} = 3 \, m = \dfrac{u^2}{9.8 \, m/s^2 }[/tex]
u² = 3 m × 9.8 m/s² = 29.4 m²/s²
Therefore, on the Moon, we have;
The acceleration due to gravity on the Moon, [tex]g_{Moon}[/tex] = 1/16 × g
∴ [tex]g_{Moon}[/tex] = 1/16 × g = 1/16 × 9.8 m/s² ≈ 0.6125 m/s²
[tex]R_{max \ Moon} = \dfrac{u^2}{g_{Moon}} = \dfrac{29.4 \ m^2/s^2}{0.6125 \, m/s^2 } \approx 48 \, m[/tex]
The maximum distance the person can jump on the Moon with the same velocity which was used on Earth is [tex]R_{max \ Moon}[/tex] ≈ 48 m
Series Circuits and Parallel Circuits
How similar?
How different?
Answer:
series circuits have a line of several electrical patterns parallel curcuits are seperated
Explanation:
hope this helps..
+
CaCl 2
+
_C2HCl3
C2H2C14
H 20
+
Ca(OH) 2 →
Can someone help me please
Metalloids
Metalloids have properties that are intermediate between metals and non-metals. They have properties that are difficult to characterize.
Physical Properties of Metalloids
State of matter - Solid
Lustre - Metallic lustre
Elasticity - Brittle
Conductivity - Semi-conductive in nature
Chemical Properties of Metalloids
Oxidation - They are capable of forming glasses.
Alloys - When mixed with metals, they form alloys.
Allotropic - Metallic and non-metallic allotropes are formed.
Melting - Few metalloids contract when they are melted.
Compounds - Compounds are formed when they react with halogens.
Common Properties of Metalloids
Metalloids are good semiconductors. The reactivity of metalloids is dependent on the properties of the elements they are reacting with. Electronegativity and ionization energy are between metals and non-metals.Non-Metals
Non-metals are those which lack all the metallic attributes. They are good insulators of heat and electricity. They are mostly gases and sometimes liquid. Some they are even solid at room temperatures like Carbon, sulphur and phosphorus.
Properties of Non metals
Characteristic properties of non-metals are high ionization energies and high electronegativity. Owing to these properties, non-metals usually gain electrons when reacting with other compounds, forming covalent bonds. Among the non-metals, the anionic dopants have a strong influence on the VB. Non-Metal dopants are carbon, nitrogen, fluorine, sulphur and iodine.
General properties of non-metals.
The atoms of non-metals tend to be smaller than those of metals. Several of the other properties of non-metals result from their atomic sizes. Non-metals exhibit very low electrical conductivities. The low or non-existent electrical conductivity is the most important property that distinguishes non-metals from metals. Non-metals have high electronegativities. This means that the atoms of non-metals have a strong tendency to attract more electrons than what they would normally have. Non-metals have high electronegativities. This means that the atoms of non-metals have a strong tendency to hold on to the electrons that already have. In contrast, metals rather easily give up one or more electrons to non-metals, metal therefore easily form positively charged ions, and metals readily conduct electricity. Under normal conditions of temperature and pressure, some non-metals are found as gases, some found as solids and one is found as liquid. In contrast, except mercury, all metals are solids at room temperature. The fact that so many non-metals exist as liquids or gases means that non-metals generally have relatively low melting and boiling points under normal atmospheric conditions. In their solid-state, non-metals tend to be brittle. Therefore, they lack the malleability and ductility exhibited by metals.Physical Properties of Non-Metals
Ductility is the property of the material to be stretched into wires but non-metals are not ductile except for carbon, as carbon fibres find uses in a wide variety of industries including sports and music equipment. Another property characteristic to metals is absent in non-metals called malleability. They can’t be drawn into sheets as they are brittle and break on applying pressure. They are not lustrous as they do not have any shiny appearance. They are not sonorous and do not produce a deep ringing sound when they are hit with another material. They are also bad conductors of heat and electricity except for graphite.A car is traveling at 75 m/s. 50 seconds later it is traveling at 25 m/s. What is the car’s acceleration?
Answer:
a = -1 m/s^2
Explanation:
Vi = 75 m/s
Vf = 25 m/s
t = 50 s
Plug those values into the following equation:
Vf = Vi + at
25 = 75 + 50a
---> a = -1 m/s^2
How to calculate the period of a wave?
Answer:
The wave velocity and the wavelength are related to the wave's frequency and period by vw=λT or vw=fλ. The time for one complete wave cycle is the period T. The number of waves per unit time is the frequency ƒ. The wave frequency and the period are inversely related to one another.
Explanation:
T = 1 / f is the formula to calculate the period of a wave.
What is the period of the wave?The time it takes for two successive crests (one wavelength) to pass a specified point. The wave period is often referenced in seconds.
The calculation of period of wave is:
The formula for period is T = 1 / f ,
where "T" is period – the time it takes for one cycle to complete, and "f" is frequency.
To get period from frequency, first convert frequency from Hertz to 1/s.
Period refers to the time for something to happen and is measured in seconds/cycle.
In this case, there are 11 seconds per 33 vibrational cycles.
Thus the period is (11 s) / (33 cycles) = 0.33 seconds.
Therefore,
T = 1 / f is the formula to calculate the period of a wave.
Learn more about period of the wave here:
https://brainly.com/question/14588679
#SPJ2
What is the average velocity of atoms in 1.00 mol of neon (a monatomic gas) at 2°C? For m, use 0.0202 kg.
Answer:The average Velocity of the atoms =582.73m/s
Explanation:
Given
Mole of neon gas = 1.00 mol
Temperature = 2°C changing to Kelvin becomes
2°C + 273.15 = 275.15K
Mass = 0.0202 kg
Using the equation that connects the Average kinetic energy with ideal gas equation we have that
Kinetic energy=3/2 nRt
1/2(mv^2) = 3/2 nRt
Where
M = mass,
V = volume.
R = gas constant(8.31 jK-1 mol-1,
t = temperature in Kelvin,
n = number of moles
Putting our known values, we have that
1/2(0.0202 × v^2) = 3/2 (1 × 8.31 × 275.15)
0.0101 v^2 = 3,429.745
v^2 = 3429.745 / 0.0101
v^2 = 339,578.713
v = √339578.713
v = 582.73m/s
If an object straight down falls 30m in 2 sec , how far will falls in 4 sec , what is the tail wind and headwind
Answer:
60 sec
Explanation:
60m because in every 30min in 2sec so 30 × 2= 60 min
When someone asked you if you have a special talent.
Answer:
lowkeyyyy
explanation:
identify global climate zones and characteristics of each
research the different time zone around the world, and characteristics of each
You drive home from school steadily at 90 km/hr for 145 km.
How long did it take you to get home?
Answer:
90km/hr I think but if it is wrong than sorry
This force is a pull between all objects. It is the force that gives us weight here on Earth. And, if we throw a rock off of a cliff, it is the force that causes the rock to fall to Earth. What is this force?
Answer:
Gravity.
Explanation:
Gravity is considered to be a universal force of attraction which acts between all objects that has both mass, energy and occupy space. Therefore, it acts in such a way as to bring objects together.
Additionally, the gravity of earth makes it possible for all physical objects to possess weight.
This ultimately implies that, this force is a pull between all objects. It is the force that gives us weight here on Earth. And, if we throw a rock off of a cliff, it is the force that causes the rock to fall to Earth.
Which conclusion about the atom can be drawn from Rutherford’s gold foil experiment?
A.Has a zero oxidation #
B.Has a neutral charge
C.Has a small negative center
D.Has a small positive center
How long would it take for a car to travel 500m if it was moving at a constant speed of 50.0 km/h?
What do we call the energy that is transferred to
a substance without the substance's temperature
changing?
Answer:
Latent heat
Latent heat is the heat needed to change a state without a change in temperature.
Explanation:
Hope this helps :D
a student is supplied with the following pieces of equipment:
• a small metal ball
• table tennis ball
• metre rule
• stop clock
• calculator
• light gate
• data logger
describe how the student can use this, or other additional equipment, to determine an accurate value for the acceleration of free fall (g). the student need not use all the equipment. show clearly what measurements should be taken and how the students should use these in determining (g). describe one source of error and how this might affect the value of (g).
(6 marks/year9/gcse)
Explanation:
Use a meter stick, small metal ball, stopwatch, calculator.
Have the students mark off a vetrtical distance from which to drop the metal ball. Ready the stopwatch, and start when the object is dropped and stop when the object contact the ground. Repeat 5 times and average the stopwatch times.
Now, use the formula d=vo+(1/2)at^2
There's no initial velocity, so d=(1/2)at^2
We know time and distance, so we can solve for a, acceleration.
2d=at^2
(2d)/(t^2)=a
Now, input the numbers gathered in the experiment in meters and seconds.
One source of error is human error (stopwatch timing)
Air resistance (although pretty negligible)
The pilot directs the aircraft to fly due north at 600km/h. A side-wind blows at
100km/h towards the east. What will be the aircraft's resultant velocity? (Give both its
speed and direction)
Answer:
678.2 km/h and 80.54° north of east
Explanation:
From the question,
Using pythagoras theorem,
a² = b²+c²..................... Equation 1
Where a = resultant velocity
Given: b = 600 km/h, c = 100 km/h
Substitute these values into equation 1
R² = 600²+100²
R² = 360000+10000
R² = 460000
R = √460000
R = 678.2 km/h.
And the direction is
tanθ = 600/100
tanθ = 6
tanθ = 6
θ = tan⁻¹(6)
θ = 80.54°.
Hence the resultant velocity of the aircraft is 678.2 km/h and 80.54° north of east
An Led Light bulb is rated 14 W. How much energy will the light bulb consume if it is on for 1 hour (3600 seconds)
Answer:
18kW
Explanation:
very LED bulb has a power rating in terms of Watt-hour. It gives the power consumption per hour. For e.g. a 100W light bulb consumes 100W of electricity per hour. If left 'on' for 10 hours, a 100W light bulb costs 1kW and 1 unit of electricity is burned. Because 1 unit = 1 Kw of electricity.
I calculated my electricity consumption in 1 hour with LED Bulb as follows-
LED Bulbs power rating- 15 watt
quantity- 1
No. of hours a day – 12
Wattage in 1 hour – 12(time) x 15(load) x 1(quantity) = 180W = .18kW
So consumption units of power with a LED Bulb consume in 1 hour= .18 Units (because 1 KW = 1 unit)