Answer:
The equipment to use is: a beaker, a fixed amount of water, a thermometer.
The mass of water, the time, the temperature for each time should be noted and a graph of Temperature versus time should be made
Explanation:
The design of an experiment is to place the beaker in the microwave, with a good amount of water (approximately ⅔ of its capacity) and turn it on for small periods of time, generally the minimum is 30 s, quickly open the microwave, place a thermometer or better yet an infrared thermometer to measure the temperature of the water; repeat this several times.
The advantage of the infrared thermometer is that it reduces the transfer of heat between the water and the thermometer.
The mass of water, the time, the temperature for each time should be noted and a graph of Temperature versus time should be made.
The equipment to use is: a beaker, a fixed amount of water, a thermometer.
The main precaution that must be taken is not to open the microwave while it is on.
Consider the four masses. Describe the motion of the masses if you used THE SAME amount of force to move each one over THE
SAME time
A)
The greatest mass would not move at all.
B)
All four masses would move the same distance,
The lower the mass, the greater the distance the mass would move,
D)
The greater the mass, the greater the distance the mass would move,
Answer:
option c...................
The mass of water in the kettle is 0.50 kg. The specific heat capacity of water is 4200 J/kg °C. The initial temperature of the water is 100 °C. Calculate the average power output from the water in the kettle to the surroundings in 2 hours
Answer:
1.27 Mega watt approx
Explanation:
Given data
Mass= 0.5kg
c= 4200 J/kg °C
T1= 100°C
Time = 2 hours >>>> 7200 seconds
From the given data the water is already at the boiling point
Hence if continuous heat is being added the latent heat of vapourization will result, the latent heat of vaporization is about 2,260 kJ/kg
Q= mL
Q= 0.5*2,260
Q = 1130kJ
Power= Energy * Time
Power= 1130* 1130
Power= 1.27mega watt approx
Explain the benefits of understanding sound waves properties in real life.
Answer:
The vibrations from sound waves cause our ears to send signals to our brains to create sound. The speed of sound waves will determine the sound's pitch, or how high or low something sounds. Sound waves are important because they allow us to hear important messages and emergency signals to protect ourselves.
Explanation:
I hope this helps :)
an object that is accelerating may be
It must be either speeding up, or slowing down, or turning. There are no other possibilities.
Example 4:
Find the index of refraction for diamond if the speed of light in diamond is 1.24 x 10m/s
Use the proper FORMAT
Answer:
Given speed of light in diamond =1.24*10m/s
speed of light (c) =3*10^8m/s
refractive index of diamond =3*10^8/1.24*10=2.41*10^7m/s
In music, the note G above middle C has a frequency of about 392 hertz. If the speed of sound in the air is 340 m/s, what is the approximate wavelength of this note?(1 point)
1.2 meters
8.7 meters
0.87 meters
0.0026 meters
Answer:
0.87 meters
Explanation:
If you were in charge of designing a wire to carry electricity across your city, state or province, which of
the following properties would be most important for your wire to have?
Should it be thick or thin, aluminum or nichrome, buried underground or installed out in the sun
Pleaseeee I need this done I beg Ill give brainiest and make sure its at least on paragraph if not then at least as many sentences as you can please
Answer:
Thin, aluminium and buried underground.
Explanation:
When it comes to electrification of a state or province, some characteristics of the wire to use must be considered. This would help to minimize and avoid power loss and wire burns.
i. The wire to use should be thin, and a quite number can be twisted one against the other so as to increase the surface area for heat dissipation.
ii. Aluminium wire is more preferable for this project. It has a high melting point, and reduces energy loss.
iii. Burying the wire underground through an insulator is the best choice, though expensive but would preserve the wire from external influence.
The amount of matter in an object is mass or weight
Answer:
mass
Explanation:
A scientist heats a red powder. Upon heating, a liquid and a gas form.
Which type of substance is the red powder?
O A. anion
B. an isotope
O c. an element
O D. a compound
Answer:
Compound
Explanation:
Why is visible light safe to humans ?
Explanation:
Visible light is the range of electromagnetic waves that humans can see. Anything that glows or gives off light makes waves of what we call visible light. The sun, light bulbs, candles and fire are all things that people automatically think of when it comes to light, but visible light comes from many sources and in many colors. Some other sources of visible light include: television and computer screens, glow sticks, and fireworks
Answer:
Visible light is visible because most of the gases in planetary atmospheres (oxygen, nitrogen, carbon dioxide, methane, ammonia…) are transparent to those wavelengths. We evolved to see those wavelengths because the atmosphere in visible light is transparent.
Explanation:
Sally's mass on Earth is 50 kg. What is her mass on the moon?
Answer:
Being that the moon has a gravitational force of 1.622m/s 2, we multiply the object's mass by this quanitity to calculate an object's weight on the moon. So an object or person on the moon would weigh 16.5% its weight on earth. Therefore, a person would be much lighter on the moon. Conversely, a person is 83.5% heavier on earth than on the moon.
Explanation:
does this help
Sally's mass on Moon is: C. 50 kg
Mass is a measure of the amount of matter that an object or a body is typically made up of. The standard unit of measurement for the mass of an object is kilograms (kg).
Regardless of the location of a person, an object at any given time, mass (amount of matter that they're made up of) is always the same i.e constant.
This ultimately implies that, whether you're on the Moon, space, planet Earth or any other place; your mass would always remain the same or constant.
In this scenario, Sally's mass on Earth is 50 kg. Thus, we can deduce that her mass on Moon would be 50 kg.
Read more: https://brainly.com/question/23993006
c) 12g/cm d) 0.2g/cm
6. A girl of mass 40kg wears heels of an area of 1cm2 in contact with the ground,
the pressure on the ground (g=9.8 m/s2)
ad Y10-4na
b) 4x104 na
c) 4 105
da 105
Explanation:
Is this ok?......I have got the answer in pascals.
Can you freeze sound waves
Answer:
I believe it's not possible
Explanation:
there's really no way I currently know of that we can do that so I suppose no.
Anita rides a bicycle to market 60km from her house in 3.5 hours. What is Anita’s
speed?
A saw becomes warm when it is used to cut a log of wood.Give reason
Explanation:
a part of the kinetic energy of the sun is converted into heat as it cuts the log of wood it is due to this heat that becomes worm .Thus, kinetic energy of such changes into heat
Weight is best described as
A) an object’s resistance to acceleration.
B) what causes an object to fall.
C) the downward force exerted on objects due to gravity.
D) a force solely dependent on an object’s mass.
Answer:
d
Explanation:
Answer:
d
Explanation
a force solely dependent on the object’s mass
Bill and Nageen have each built an electric motor and they are testing them by having them lift boxes. Bill's motor lifts a box 0.39 metres in 2 seconds. Nageen's motor lifts the same box 0.35 metres in 2 seconds. Whose motor has applied more power to the box?
Answer:
Bill's motor
Explanation:
Bill's motor lifts a box 0.39 metres in 2 seconds.
Nageen's motor lifts the same box 0.35 metres in 2 seconds.
Power = Work done/time
or
[tex]P=\dfrac{mg\times h}{t}[/tex]
Power of bill's motor,
[tex]P_1=\dfrac{m\times 9.8\times 0.39}{2}\\\\P_1=1.91m\ Watts[/tex]
Power of Nageen's motor,
[tex]P_2=\dfrac{m\times 9.8\times 0.35}{2}\\\\P_2=1.71m\ Watts[/tex]
So, Bill's motor applied more power to the box.
Why isn't the story of Israel not fully accurate?
Answer:
wait what do you mean? And why is this in physics?
Is this about the iron dome or something biblical?
Explanation:
Answer:
the story of Israel is part of the Bible that's what what you're your lesson is
Explanation:
How do we know when an object is in static or dynamic equilibrium?
Answer:
First Condition of Equilibrium
Explanation:
This means that both the net force and the net torque on the object must be zero. The condition Fnet=0 F net = 0 must be true for both static equilibrium, where the object's velocity is zero, and dynamic equilibrium, where the object is moving at a constant velocity.The sum of the forces on it in each direction is zero. The sum of the torques on it in each direction is zero. Its linear momentum is zero.462.3 cm - 25.74 cm
Answer:
436.56 centimeters
Explanation:
heart this! My answer is correct, I search it.
need help please and
A protein-digesting enzyme when mixed with starch solution would
Answer:
It would produce fat..........
2. a) A student obtained ice at 0°C from a refrigerator and placed it in a beaker on a
bench. After 4 minutes, the temperature rose to 4°C. State the changes that would be observed in the water in terms of;
(i) volume
(ii) mass
(iii) density
(b) Sketch a graph of density against temperature if the ice is warmed from 0°C to
8°C.
Answer:
2 4
Explanation:
because
The diagram below shows a wave. The feature of the wave are labeled A, B, C, and D. Which label identifies the wavelength?
According to the given diagram, the c identifies the wavelength of the curve. Hence, option C is correct.
What is wavelength?In order to characterize waveform signals that are transmitted across wires or into space, the term "wavelength" is used to refer to the separation between two identical positions (adjacent crests) in succeeding cycles. Typically, this length in wireless systems is measured in meters (m), centimeters (cm), or millimeters (mm) (mm). When describing the wavelength of infrared (IR), visible light (UV), and gamma radiation, units of 10-9 nanometers (nm) or angstroms (10-10 m) are more usually used.
The relationship between frequency and wavelength is inverse, with frequency being the number of wave cycles per second. A signal's wavelength shortens as its frequency rises, or we may say that the relationship between wavelength and refractive index is inverse.
To get more information about wavelength :
https://brainly.com/question/13533093
#SPJ2
Thermal energy involves the___stored in a system
A. Friction
B.electric current
C.heat
D.electromagnetic waves
Pls help
Answer:
c. heat
Explanation:
thermal energy IS heat energy
A balloon of hydrogen is put into to pressure chamber. The initial pressure and volume of hydrogen is 1 atm and .5 cm3. The pressure of the chamber is increased to 2 atm. What is the new volume? Use the formula for Boyle's Law: P1V1 = P2V2
Answer:
2.5 cm³
Explanation:
Use Boyle's Law
1×5=2×V
5=2V
V=5/2=2.5 cm³
Can someone help me answer this question what type of rock will form in this type of environment. Pls don’t guess and actually answer it
Answer:
Looks like A but I'm not sure.
Explanation:
dont take my word for it I might be wrong
Answer:
deforestación en el mundo es incontrolable
Eiman connects eight 12Ω lamps in series. What is
the total resistance of the circuit?
please help
Answer:
Total resistance is 96 ohm
Explanation:
Rs = R1 +R2 + R3 + R4 + R5 +R6 + R7 + R8
where R1 is lamp 1
R2 is lamp 2 n so on
Rs = 12 + 12 +12 + 12 +12 + 12 + 12 + 12( as each lamp is of resistance 12)
Rs = 96 ohm
GOOD LUCK FOR THE FUTURE! :)
Leigh Ann is learning about the differences between inherited traits and learned behaviors in organisms. For example, she knows that being able to read is learned while having straight or curly hair is inherited. How does a person inherit a trait such as hair texture?
A. Through the storage of extra fat during birth
B. Through DNA that is passed from parents to offspring
C. Through the breakdown of different proteins during birth
D. Through different viruses that are passed from parents to offspring
Answer:it the letter b I was just finished with this test
Explanation:
State the Law of Electric Charges in your own words.
[tex] \\ [/tex]
According to Coulomb, the electric force for charges at rest has the following properties: Like charges repel each other; unlike charges attract. Thus, two negative charges repel one another, while a positive charge attracts a negative charge. The attraction or repulsion acts along the line between the two charges.
Things that are negatively charged and things that are positively charged pull on (attract) each other. This makes electrons and protons stick together to form atoms. Things that have the same charge push each other away (they repel each other). This is called the Law of Charges.
[tex] \\ [/tex]
Hope It Helps!