Answer: It will take 425 hours to plate 19.5 kg of copper onto the cathode if the current passed through the cell is held constant at 38.5 A.
Explanation:
The half-reaction equation is as follows.
[tex]Cu^{2+} + 2e^{-} \rightarrow Cu[/tex]
According to the standard values, 1 mole of an electron carries 96500 C. Therefore, charge carried by 2 moles of electrons is [tex]2 \times 96500 C[/tex].
Also, atomic mass of Cu is 63.5 g. According to the equation 2 moles of electrons are depositing 63.5 g of Cu.
Hence, charge required to deposit 19.5 kg (1 kg = 1000 g) or 19500 g of Cu is calculated as follows.
[tex]19500 g Cu \times \frac{2 \times 96500 C}{63.5 g Cu}\\= 5.92 \times 10^{7} C[/tex]
Formula used to calculate time is as follows.
[tex]Q = I \times t[/tex]
where,
Q = charge
I = current
t = time
Substitute the values into above formula as follows.
[tex]5.92 \times 10^{7} C = 38.5 \times t\\t = \frac{5.92 \times 10^{7} C}{38.5}\\= 1.53 \times 10^{6} sec[/tex]
As 1 hour contains 3600 seconds. So, converting seconds into hours as follows.
[tex]1.53 \times 10^{6} sec = 1.53 \times 10^{6} sec \times \frac{1 hr}{3600 sec}\\= 425 hr[/tex]
Thus, we can conclude that it will take 425 hours to plate 19.5 kg of copper onto the cathode if the current passed through the cell is held constant at 38.5 A.
A neutralization reaction is taking place between solutions of phosphoric acid and calcium
hydroxide. For each mole of calcium phosphate produced by this reaction, how many moles
of water are produced?
a. 2
c. 4
b. 3
d. 6
Answer:
A
Explanation:
hope this help sweetie <$
A saturated solution of sucrose in 500.0 mL of boiling water is cooled to 20.0 0C. What mass of rock candy will be formed?
Answer:
1280.5g
Explanation:
Guided Notes: Types of Chemical Reactions:
1. Synthesis or Combination
A + B à AB
Example:
Magnesium + Oxygen gas à Magnesium Oxide
_________ + _______ à __________
2. Decomposition
AB à A + B
Example:
Calcium Oxide à Calcium + Oxygen
_______ à __________ + __________
3. Single Replacement
A + BX à AX + B
Example:
_________ + _______ à __________ + __________
4. Double Replacement
AX + BY à AY + BX
Example:
_________ + _______ à __________ + _________
5. Combustion
CxHyOz + O2 à CO2 + H2O
Example:
Propane + Oxygen à Carbon dioxide + water
_________ + _______ à __________ + _________
Classify the following chemical reactions:
Sodium and Chlorine gas à Sodium Chloride
_________ + _______ à __________ Type of Reaction: __________________
CaCO3 + HCl à CaCl2 + H2CO3 Type of Reaction: __________________
Al + ZnCl2 à AlCl3 + Zn Type of Reaction: __________________
Fe + O2 à Fe2O3 Type of Reaction: __________________
H2CO3 à CO2 + H2O Type of Reaction: __________________
Octane (C8H10) is burned in oxygen gas to produce
carbon dioxide and gaseous water
______ + _______ à _______ + ________ Type of Reaction: _________________
Answer:
the answer is like same we do last I know the answer I will help you to get more questionable and paste it to you do you know what time you do it me william and paste Now bro hurry up please and then let's go play with me again Go to bed ️ I don't know what to do patch right Now or just a question for you to get more questionable
Which organic compound listed below does not have a carbonyl group ?
A. Aldehyde
B. Ketone
C. Ethers
D. Protein
E. Ester
F. Amides
Can someone please solve this question?? Is an element in group 3 likely to bond with an element from group 2?? Explain using the number of balance electrons from each element and the tot number of balance electrons needed to fill an about shell
Answer:
An atom with one or two valence electrons more than a closed shell The number of valence electrons of an element can be determined Groups 3-12 (transition metals), 2* (The 4s shell is complete and cannot hold any more electrons) in explaining the molecular structure of many organic compounds.
Explanation:
14. The illustration below shows two atoms of a fictitious element (M) forming a diatomic
molecule. What type of bonding occurs between these two atoms?
A. Covalent
B. Hydrogen
C. lonic
D. Polar
Covalent bonding involving covalent bonds is depicted between these two atoms as they form diatomic molecule.
What is a covalent bond?Covalent bond is defined as a type of bond which is formed by the mutual sharing of electrons to form electron pairs between the two atoms.These electron pairs are called as bonding pairs or shared pair of electrons.
Due to the sharing of valence electrons , the atoms are able to achieve a stable electronic configuration . Covalent bonding involves many types of interactions like σ bonding,π bonding ,metal-to-metal bonding ,etc.
Sigma bonds are the strongest covalent bonds while the pi bonds are weaker covalent bonds .Covalent bonds are affected by electronegativities of the atoms present in the molecules.Compounds having covalent bonds have lower melting points as compared to those with ionic bonds.
Learn more about covalent bond,here:
https://brainly.com/question/19382448
#SPJ2
Why is the regression equation not exactly y = 100 • 0.5n?
Answer:
Radioactive decay is a random event.
Explanation:
on edge
Answer:
Radioactive decay is a random event.
Explanation:
Edge 2020
A common asteroid is in the first photograph. Haley's Comet is in the second photograph. What can be inferred about comets and asteroids? Answer A Both have orbits around the Earth that are ellipses B Both are miniature planets because they orbit the Sun C Both could be planetary fragments from the beginnings of solar system formation D Both are made of rock, ice, and solar dust from the beginning of the solar system
Answer:
D Both are made of rock ,ice and solar dust from the beginning of the solar system
Answer:
The answer is D
Explanation:
How many grams of oxygen are required to burn 3.01 x 10^23 propane molecules?
A balloon is inflated to a volume of 8.0 L on a day when the atmospheric pressure is 1.013 bar . The next day, a storm front arrives, and the atmospheric pressure drops to 0.968 bar . Assuming the temperature remains constant, what is the new volume of the balloon, in liters
Answer:
[tex]V_2=8.4L[/tex]
Explanation:
Hello there!
In this case, according to the definition of the Boyle's law, which describes de pressure-volume behavior as an inversely proportional relationship, it is possible for us to write:
[tex]P_1V_1=P_2V_2[/tex]
Thus, since we are given the initial pressure and temperature, and the final pressure, we are able to calculate the final volume as shown below:
[tex]baV_2=\frac{P_1V_1}{P_2}\\\\V_2=\frac{8.0L*1.013bar}{ 0.968bar}\\\\V_2=8.4L[/tex]
Regards!
If we have 0.06 moles of HCI
How many grams of magnesium metal is that?
Answer:
1.44 g
Explanation:
From the question given above, the following data were obtained:
Number of mole of HCl = 0.06 mole
Mass of Mg =?
From the question given above, we discovered the number of mole of HCl is equivalent to the number of mole of Mg. Thus,
Number of mole of Mg = number of mole of HCl
Number of mole of Mg = 0.06 mole
Finally, we shall determine the mass of Mg. This can be obtained as follow:
Number of mole of Mg = 0.06 mole
Molar mass of Mg = 24 g/mol
Mass of Mg =?
Mass = mole × molar mass
Mass of Mg = 0.06 × 24
Mass of Mg = 1.44 g
Therefore, the mass of magnesium is 1.44 g
A student pours 10.0 g of salt into a container of water and observes the amount of time it takes for the salt to dissolve. She then repeats the process using the same amounts of salt and water but this time she slowly stirs the mixture while it is dissolving. The student performs the experiment one more time but this time she stirs the mixture rapidly.
Answer:
It will go faster each time because she is stirring therefore the water can get to the salt faster than it just sitting at the top
Explanation:
PLEASE HELP I HAVE 19 MINUTES LEFT I WILL MARK BRAINLIEST
How much more acidic is a pH of 4 as compared to a pH of 6.5?
Answer:
316.227766
Explanation:
There are four stages to the classical demographic transition model Pre-transitional Europe was characterized by high and
fluctuating mortality and a high birth rate. The transition model began to progress into and through stage 2 in the late 18th and early
19th century. All BUT ONE contributed to the decline in mortality.
S- -1]))
A)
Enacting measures to provide clean water supplies.
B)
Public health advances including quarantine of settlements undergoing
epidemics
The development of vaccines to prevent disease and antibiotics to treat
infection.
D)
Widespread acceptance of germ theory resulting in more hygienic
practices, including hand washing and sterilizing medical equipment and
infants' bottles.
A balloon is filled with 3.50 L of water at 24.0°C. What is the volume of the water at 307 K?
Answer:
what is the volume of the water at 307 k?
Anyone knows gunpowder formula?
1. In a chemical reaction
a. the mass of the reactants equals the mass of the products.
b. the mass of the products is greater than the mass of reactants.
c.the number of atoms in the reactants and products must change.
d. energy as heat must be added to the reactants.
Answer:
A
Explanation:
Law of conservation of matter
A chemist must dilute 61.9 mL of 548. nM aqueous sodium carbonate (Na2CO3) solution until the concentration falls to 484. nM . He'll do this by adding distilled water to the solution until it reaches a certain final volume. Calculate this final volume, in milliliters. Round your answer to 3 significant digits.
Answer:
The final volume will be "70.08 mL".
Explanation:
The given values are:
Molar mass,
M1 = 548 nM
or,
= [tex]5.48\times 10^{-7} \ M[/tex]
M2 = 484 nM
or,
= [tex]4.84\times 10^{-7} \ M[/tex]
Volume,
V1 = 61.9 mL
V1 = ?
By using the expression, we get
⇒ [tex]M1\times V1=M2\times V2[/tex]
or,
⇒ [tex]V2=\frac{M1\times V1}{M2}[/tex]
By substituting the values, we get
[tex]=\frac{5.48\times 10^{-7}\times 61.9}{4.84\times 10^{-7}}[/tex]
[tex]=\frac{339.212}{4.84}[/tex]
[tex]=70.08 \ mL[/tex]
How many moles of aluminum oxide (Al2O3) will be produced if 1.5 mole of aluminum (AI) reacts with oxygen? Input a numerical answer only. 4Al + 302 ---> 2Al2O3
Explanation:
The number of moles of Al2O3 formed is approximately 4.25 moles. Second find the limiting reactant. Since O2 has less value that is 2.126 than Al that is 2.287, O2 is the limiting reactant in this reaction.
when rolling a number cube 500 times, how many times you expect to get a 3?
Answer:
[tex]\frac{250}{3}[/tex]
Explanation:
you can expect to get a 3 (theoretically) 1 time every 6 times you roll. A 1/6 chance.
Here's the equation:
[tex]\frac{1}{6} =\frac{x}{500}[/tex]
cross multiply (i think that's what it is called)
500=6x
divide by 6 on both sides:
x=[tex]\frac{250}{3}[/tex] or approx 83 times.
Hope this helps! Lmk if u have more questions <3
An experimental measurement was taken of 10.4mL and the actual measurement was 9.7mL. What is the percent error?
Answer:
13%
Explanation:
HOW MANY ELEMENTS ARE IN 3FE(OH)3
Answer:
Three
Explanation:
Iron
Oxygen
Hydrogen
how many molecules in 400g of acetic acid
Answer:chemical formula of acetic acid is or
so, molecular mass of acetic acid = 2 × atomic mass of C + 4 × atomic mass of H + 2 × atomic mass of O
= 2 × 12 + 4 × 1 + 2 × 16
= 24 + 4 + 32
= 60g/mol
given mass of acetic acid = 22g
so, no of moles of acetic acid = given mass/molecular mass
= 22/60 ≈ 0.367
so, number of moles of acetic acid is 0.367mol
number of molecules in 0.367 mol of acetic acid = 6.022 × 10²³ × 0.367
= 2.21 × 10²³
Explanation:
-4. A student learns that all of the particles within an object possess kinetic energy. Based on this fact,
the student can conclude that all of the particles in the object-
A. Contains the same atoms. B. Are hotter than their surroundings C.Are in motion. D. Are covalently bonded
Answer:
C
Explanation:
The correct option is option C. which is "are in motion".
All the particles inside an object have kinetic energy, which implies that the particles are moving. Kinetic energy is the force that drives an object's or its constituent parts in motion. As a result, it can be inferred from this fact that the object's particles are in motion.
Options A, B, and D are not necessarily true based on the given information. The fact that particles have kinetic energy does not imply that they contain the same atoms (option A), are hotter than their surroundings (option B), or are covalently bonded (option D). These characteristics are not directly related to the presence of kinetic energy in particles.
Therefore, option c is the correct option.
Learn more about kinetic energy here:
https://brainly.com/question/999862
#SPJ2
0.41g of neon is held in a 200. mL container at 11 °C. Calculate the pressure in atm.
Answer:
2.39 atm
Explanation:
We'll begin by calculating the number of mole in 0.41 g of neon (Ne). This can be obtained as follow:
Mass of Ne = 0.41 g
Molar mass of Ne = 20 g/mol
Mole of Ne =.?
Mole = mass / molar mass
Mole of Ne = 0.41 / 20
Mole of Ne = 0.0205 mole
Next we shall convert 200 mL to L.
1000 mL = 1 L
Therefore,
200 mL = 200 mL × 1 L / 1000 mL
200 mL = 0.2 L
Next, we shall convert 11 °C to Kelvin temperature.
T(K) = T(°C) + 273
T(°C) = 11 °C
T(K) = 11 + 273
T (K) = 284 K
Finally, we shall determine the pressure. This can be obtained as follow:
Mole of Ne (n) = 0.0205 mole
Volume (V) = 0.2 L
Temperature (T) = 284 K
Gas constant (R) = 0.0821 atm.L/Kmol
Pressure (P) =?
PV = nRT
P × 0.2 = 0.0205 × 0.0821 × 284
P × 0.2 = 0.4779862
Divide both side by 0.2
P = 0.4779862 / 0.2
P = 2.49 atm
Therefore, the pressure of the gas is 2.39 atm
Which type of molecule is shown below?
O A. Alkene
O B. Cyclic alkane
O C. Alkane
O D. Alkyne
Answer:
A. Alkene
Explanation:
Alkenes are a class of hydrocarbons characterized by the possession of a carbon to carbon double bond (=) in their structure. This means that C=C is the functional group of alkenes. Alkenes have the general formula; CnH2n.
Based on the structure in the attached image, the structure can be identified to be an ALKENE because it possess a C=C functional group. Specifically, the IUPAC name of the structure is 1,2- dimethyl ethene.
.......state Hess law
Can someone help me out, thanks
Answer:
See EXPLANATION
Explanation:
We must bear in mind that in balancing chemical reaction equations, the number of atoms of each element on the right hand side must be the same as the number of atoms of the same element on the left hand side of the reaction equation. This follows from the law of conservation of mass.
Based on this;
There are two oxygen atoms on the left hand side of the reaction equation, thus total mass of oxygen = 2 * 16 amu = 32 amu
There are two oxygen atoms on the product side of the reaction equation, thus the total mass of oxygen = 2 * 16 amu = 32 amu
In the energy profile of a reaction, the species that exists at the maximum on the curve is called the ________. In the energy profile of a reaction, the species that exists at the maximum on the curve is called the ________. atomic state activated complex activation energy enthalpy of reaction product
Answer:
The activated complex
Explanation:
The activated complex are the species that exists maximum in every energy profile of a reaction.
Activated complex is nothing but an intermediate state of reactants formed during its conversion from a reactant to product state in coarse of reaction.
The activated complex is formed at the maximum energy level in the reaction path. And this difference between energy of the activated complex and the energy of the reactants is only known as activation energy
Inquiry Extension Consider a reaction that occurs between solid potassium and chlorine gas. If you start with an initial mass of 15.20 g K, and an initial mass of 2.830 g Cl2, calculate which reactant is limiting. Explain how to determine how much more of the limiting reactant would be needed to completely consume the excess reactant. Verify your explanation with an example
The 3.13 g of K would be needed to completely react with the remaining [tex]Cl_2[/tex].
To determine which reactant is limiting, we need to calculate the amount of product that can be formed from each reactant and compare them. The reactant that produces less product is the limiting reactant, since the reaction cannot proceed further once it is consumed.
The balanced chemical equation for the reaction between solid potassium and chlorine gas is:
2 K(s) + [tex]Cl_2[/tex](g) -> 2 KCl(s)
From the equation, we can see that 2 moles of K react with 1 mole of [tex]Cl_2[/tex] to form 2 moles of KCl.
First, we need to convert the masses of K and [tex]Cl_2[/tex] into moles:
moles of K = 15.20 g / 39.10 g/mol = 0.388 mol
moles of [tex]Cl_2[/tex] = 2.830 g / 70.90 g/mol = 0.040 mol
Now, we can use the mole ratio from the balanced equation to calculate the theoretical yield of KCl from each reactant:
Theoretical yield of KCl from K: 0.388 mol K x (2 mol KCl / 2 mol K) = 0.388 mol KCl
Theoretical yield of KCl from [tex]Cl_2[/tex]: 0.040 mol [tex]Cl_2[/tex] x (2 mol KCl / 1 mol [tex]Cl_2[/tex]) = 0.080 mol KCl
We can see that the theoretical yield of KCl from K is 0.388 mol, while the theoretical yield of KCl from [tex]Cl_2[/tex] is 0.080 mol. Therefore, the limiting reactant is [tex]Cl_2[/tex], since it produces less product.
To determine how much more of the limiting reactant would be needed to completely consume the excess reactant, we can use the stoichiometry of the balanced equation.
We know that 1 mole of [tex]Cl_2[/tex] reacts with 2 moles of K to produce 2 moles of KCl. Therefore, the amount of additional K needed to react with the remaining [tex]Cl_2[/tex] can be calculated as follows:
moles of K needed = 0.040 mol [tex]Cl_2[/tex] x (2 mol K / 1 mol [tex]Cl_2[/tex])
= 0.080 mol K
This means that 0.080 moles of K would be needed to completely consume the remaining [tex]Cl_2[/tex]. We can convert this to a mass by multiplying by the molar mass of K:
mass of K needed = 0.080 mol K x 39.10 g/mol
= 3.13 g K
Therefore, The 3.13 g of K would be needed to completely react with the remaining.
Example verification:
Suppose we had an additional 0.50 g of [tex]Cl_2[/tex] in the reaction. Would all of the K be consumed, or would there still be excess K?
Moles of additional [tex]Cl_2[/tex] = mass of [tex]Cl_2[/tex] / molar mass of [tex]Cl_2[/tex]
Moles of additional [tex]Cl_2[/tex] = 0.50 g / 70.90 g/mol
Moles of additional [tex]Cl_2[/tex] = 0.0070 mol
The theoretical yield of KCl that can be formed from the additional [tex]Cl_2[/tex] is:
0.0070 mol [tex]Cl_2[/tex] x (2 mol KCl / 1 mol [tex]Cl_2[/tex]) x (74.55 g KCl / 1 mol KCl) = 1.04 g KCl
Therefore, the total amount of KCl that can be formed from all of the [tex]Cl_2[/tex] is:
5.95 g + 1.04 g = 6.99 g
The amount of K that would be needed to completely consume all of the [tex]Cl_2[/tex].
Learn more about Solid Potassium at
brainly.com/question/27549056
#SPJ1