Answer:Because plastic products are durable, they can last for a long time. This makes them affordable because they do not have to be replaced often. On the other hand, the popular use of plastics means that many plastics are thrown away. Plastics litter the ocean, causing harm to marine birds and mammals. Plastic breaks down into plastic dust, which can last for up to a thousand years.
^^^^^copy and paste this part^^^^^
Explanation:Plastic is he hardest material to break down with harm to sea life and land life they may be affordable but costly to the environment.
is a renewable resource used for the generation of electricity.
A. Natural gas
B. Coal
C. Petroleum
O D. Biomass
Answer:
its natural gas because i had something like this
Explanation:
The renewable energy sources, such as biomass, geothermal resources, water, wind, etc. are called the natural resources. These can be converted into clean and usable energy. The correct option is D.
What is Renewable energy?The energy which is derived from the natural sources which are replenished at a higher rate than they are consumed is defined as the Renewable energy. The renewable energy generating produce lower emissions than burning the fossil fuels.
The word biomass refers to the organic plant matter which is converted into fuel and used as an energy source. The biomass fuel is considered as an important renewable and sustainable source of energy. It is used for the production of electricity.
The organic materials like wood, agricultural wastes, etc. acts as the excellent sources to produce biomass fuel. It is possible to burn the biomass fuel directly and later converted into methane and ethanol biofuels.
Thus the correct option is D.
To know more about renewable energy, visit;
https://brainly.com/question/13258101
#SPJ7
Which element contains four electrons in its third and outer main energy level?
Answer:
valence electrons
Explanation:
The valence electrons are the outer most electrons and the principal energy level in which they belong will vary for .
The chemical element which contains four (4) electrons in its third and outer main energy level is: Silicon (Si).
An electron shell can be defined as the outermost shell of an atom of a chemical element around the atomic nucleus.
Hence, an electron shell is an orbital that is typically accompanied by electrons around the nucleus of an atom.
A sublevel is also referred to as an orbital and it can be defined as an energy level that is associated with the electrons found outside the atomic nucleus.
In Chemistry, there are four main (4) types of sublevel and these are:
s orbital (sublevel): it has one (1) orbital i.e 1s.p orbital (sublevel): it has three (3) orbitals.d orbital (sublevel): it has five (5) orbitals.f orbital (sublevel): it has seven (7) orbitals.In the third (3rd) energy level, there are only three (3) sublevels and these are; s, p and d sublevels.
Silicon is a chemical element that is found in group (4) of the periodic table because it has four (4) electrons in its third and outermost shell.
In its ground state, Silicon (Si) contains the following number of electrons:
Two electrons in its first (n = 1) energy level. Eight electrons in the second (n = 2) energy level.Lastly, it contains four (4) electrons in its third (n = 3) and outer main energy level.Read more: https://brainly.com/question/18214726
Which element is more reactive?
A) Flourine B) Oxygen C)Cabron D)Boron
Which element is classified as a noble gas?
Answer:
any of the seven chemical elements that make up Group 18 (VIIIa) of the periodic table. The elements are helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), radon (Rn), and oganesson (Og). :)
Explanation:
Answer:
For edge, the answer is;
D. Xe
(Xenon)
Explanation:
edg- answers ;p
1. Determine the electron-domain geometry and molecular geometry for each of the following.
a. SBr2
b. PI4+
c. IBr2−
2. The following three compounds all have the same general formula, XF4. Compare the electron-domain geometries of these three compounds and explain what characteristic(s) of the central atom causes differences in geometry.
a. SiF4:
b. SeF4:
c. XeF4:
Answer:
SBr2: Electron geometry-tetrahedral; molecular geometry-trigonal pyramidal
PI4+: Electron geometry-tetrahedral; molecular geometry-tetrahedral
IBr2−: Electron geometry- Trigonal bipyramidal ; molecular geometry- linear
Explanation:
In SBr2, the molecule is of the structure type AX2E2 hence it is based on a tetrahedron but have two lone pairs of electrons hence the molecular geometry is trigonal pyramidal.
PI4+ has four electron domains and all of them are bond pairs hence both electron geometry and molecular geometry are both tetrahedral.
IBr2- is of the structure type AX2E3 hence it is based on a trigonal bipyramd and has a linear molecular geometry.
2)
SiF4 has a tetrahedral molecular and electron domain geometry because the central atom(Si) has no lone pairs.
SeF4 has a trigonal bipyramidal electron geometry with the structure AX4E. Its molecular geometry is See-saw since it has one lone pair of electrons that causes a deviation from its ideal trigonal bypyramidal geometry.
XeF4 has an octahedral electron domain geometry and the molecule is AX4E2. The two lone pairs are positioned above and below the plane of a square hence the molecule is square planar.
Identifying the particles of an atom
Answer:
6 protons 8 neutrons 5 electrons
Explanation:
protons are blue neutrons are red electrons are green
What is the particle behavior of an liquid?
Answer: The particles are moving fast but close together.
Answer:
its in the explanation.
Explanation:
1.In liquids, particles are quite close together and move with random motion throughout the container. Particles move rapidly in all directions but collide with each other more frequently than in gases due to shorter distances between particles.
2.It assumes the shape of the part of the container which it occupies particles can move/slide past one another.
Hope this helps. :)
SOMEONE PLEASE HELPPP
How can environmental science help you?
Answer:
Organisms and humans depend on each other to get by. Environmental science is important because it enables you to understand how these relationships work.
For example, humans breathe out carbon dioxide, which plants need for photosynthesis. Plants, on the other hand, produce and release oxygen to the atmosphere, which humans need for respiration.
Animal droppings are sources of nutrients for plants and other microorganisms. Plants are sources of food for humans and animals. In short, organisms and humans depend on each other for survival.
Explanation:
Which statement best demonstrates how data from a global positioning system (GPS) can be used to lessen the effects of a
wildfire? (1 point)
GPS data can be used by people to quickly evacuate an area because of a wildfire
GPS data can be used by scientists to predict weather patterns that can lead to a wildfire
GPS data can be used by firefighters to identify the boundaries of a wildfire
GPS data can be used by first responders to calculate the safest route to a wildfire
Answer: here is your answer
Explanation: You are visiting your Grandmother and notice that she is eating a balanced diet, taking vitamins, getting the proper amount of sleep and is not overweight. Despite her healthy lifestyle, she appears run down and tired. You realize that it's due to her lack of physical activity. Write a convincing letter to your grandma explaining the benefits of participating in regular physical activity.
What does this diagram represent?
Answer:
Linear molecule with two domains
Explanation:
How many atoms of Chlorine are in 1.00 mol of Chlorine gas?
6.022 x 10∧23
3.01 x 10∧23
6.022 x 10∧24
Answer:
6.02 × 10²³ atoms Cl₂
Explanation:
Avagadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.
Step 1: Define
1.00 mol Cl₂ (g)
Step 2: Use Dimensional Analysis
[tex]1.00 \hspace{3} mol \hspace{3} Cl_2(\frac{6.02(10)^23 \hspace{3} atoms \hspace{3} Cl_2}{1 \hspace{3} mol \hspace{3} Cl_2} )[/tex] = 6.02 × 10²³ atoms Cl₂
what isotope of an atom if it has 29 protons and 36 neutrons
Answer:
POTASSIUM
Explanation:
2 8 8 1________ 1A
A student was performing a separation of a mixture of organic compounds. The final step of the process involved a filtration of the analyte from an aqueous solution. After drying the filtered solid for a very short period time, they took the melting point of the compound. The measured melting point range of the compound was 106 – 113.8 0C, while the literature melting point of the compound was 122.3 0C. The above scenario is a very common one in organic labs.
1. Do you think their sample was pure?
2. If not, then what do you think could be the source of error.
3. How do you think this error can be minimized?
Answer:
1) No
2) The solvent contaminated the analyte
3) The solvent should be evaporated properly before washing and drying the analyte
Explanation:
During separation of organic compounds, solvents are used. These solvents are able to contaminate the analyte and lead to a large difference in melting point of solids obtained.
However, the error can be minimized by evaporating the solvent before washing, drying and melting point determination of the solid.
Which of the following contribute(s) to most of the mass of an atom? Question 5 options: A) Neutrons only B) Protons and electrons C) Protons and neutrons D) Protons only
Answer:
C
Explanation:
Hope this helps :)
The process of reviewing information using an investigator is knowledge, training, experience, and expertise is what type of reasoning?
Answer:
Inductive reasoning
Explanation:
Inductive reasoning is based on making broad generalizations from specific observations. We draw conclusions from the data we have. This is the opposite of deductive reasoning, which starts with a general statement and aims to reach a specific conclusion.
Based on this, we can conclude that, if an investigator uses their knowledge, training, experience, and expertise to reach a conclusion, they are using inductive reasoning.
Forty milliliter of a liquid has a mass of 80 grams. What is the density of this substance?
Answer:
2.00g/ml
Explanation:
If water has a density of 1.00g/ml, and theres
40ml of it, it would weigh 40g
The substance is twice as dense as water, making its density 2.00g/ml
the density of an 18.0 solution of ammonium sulfate is 1.10g/ml. What mass of Ammonium sulfate is required to prepare 275ml of this solution
Answer:
Therefore, 54.45 g of Ammonium sulphate is required
Explanation:
Molar mass of ammonium sulphate, (NH₄)₂SO₄ = 132 g/mol
Since density of solution is 1.10 g/ml, a 1 mL solution has mass = 1.10 g
275 mL solution will have a mass = 275 * 1.10 = 302.5 g
Since the solution is 18% ammonium sulphate by weight,
mass of ammonium sulphate present in 275 mL solution = 302.5 * 18/100
mass of ammonium sulphate present in 275 mL solution = 54.45 g
Therefore, 54.45 g of Ammonium sulphate is required
Which of the following evidence supports the theory of plate tectonics
Answer:
seafloor spreading
Explanation:
i took the test
A species that has 13 protons and 10 electrons will be_____
Answer: Aluminum
Explanation:
Al3+ indicates an ion of aluminum having a charge of + 3. I.e., since an aluminum atom normally has 13 protons and 13 electrons, this ion has 10 electrons (-10 charge) and 13 protons (+ 13 charge) giving it a charge of + 3 (-10 + 13 = +3).
Answer:
Explanation:
Al3+ indicates an ion of aluminum having a charge of + 3. I.e., since an aluminum atom normally has 13 protons and 13 electrons, this ion has 10 electrons (-10 charge) and 13 protons (+ 13 charge) giving it a charge of + 3 (-10 + 13 = +3).
ccto.
What is the heat gjoules transferred by a chemical reaction to the reservoir of a calorimeter containing 135g of dilute aqueous solution (c=4.184 J/g^ C) the reaction causes the temperature of the reservoir to rise from 23.0 27.0 degrees * C
Answer:
Required heat = 2,259.36 N (approx)
Explanation:
Given:
Mass = 135 g
Specific heat (c) =4.184 J/gC
Change in temperature ΔT = 27-23 = 4 c
Find:
Required heat
Computation:
Q = mcΔT
Q = (135)(4.184)(4)
Required heat = 2,259.36 N (approx)
The heat transferred by the chemical reaction to the reservoir of a calorimeter containing 135 g of dilute aqueous solution is 2259.36 J
To solve this question, we'll begin by calculating the change in the temperature of the reservoir. This can be obtained as follow:
Initial temperature (T₁) = 23 °C
Final temperature (T₂) = 27 °C
Change in temperature (ΔT) =?ΔT = T₂ – T₁
ΔT = 27 – 23
ΔT = 4 °CFinally, we shall determine the heat transferred to the reservoir.
Change in temperature (ΔT) = 4 °C
Mass (M) = 135 g
Specific heat capacity (C) = 4.184 J/gºC
Heat (Q) =?Q = MCΔT
Q = 135 × 4.184 × 4
Q = 2259.36 JTherefore, the heat transferred by the chemical reaction to the reservoir of a calorimeter containing 135 g of dilute aqueous solution is 2259.36 J
Learn more: https://brainly.com/question/10286596
Can someone help me with this chemistry I have attached?, just helping me understand these problems. Its moles and questions
The smallest unit of an element that can exist either alone or in combination with other such particles of the same or different elements is the
А.
electron
B
proton
neutron
D
atom
Answer:
The answer is D - Atom
The smallest unit of an element that can exist either alone or in combination with other such particles of the same or different elements is the atom.
What is an atom?
An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/13654549
#SPJ2
What volume of 1.27 M HCl is required to prepare 197.4 mL of 0.456 M HCl
Answer:
70.88 mL volume of 1.27 M of HCl is required.
Explanation:
Given data:
Initial volume = ?
Initial molarity = 1.27 M
Final volume = 197.4 mL
Final molarity = 0.456 M
Solution:
Formula:
M₁V₁ = M₂V₂
Now we will put the values in formula.
1.27 M × V₁ = 0.456 M × 197.4 mL
V₁ = 0.456 M × 197.4 mL/1.27 M
V₁ = 90.014M.mL/1.27 M
V₁ = 70.88 mL
70.88 mL volume of 1.27 M of HCl is required.
5 advantages of storing oil underground in salt dome?
Answer:
Salt domes storage has advantages in cost, security, environmental risk, and maintenance. Salt formations offer the lowest cost, most environmentally secure way to store crude oil for long periods of time. Stockpiling oil in artificially-created caverns deep within the rock-hard salt costs historically about $3.50 per barrel in capital costs. Storing oil in above ground tanks, by comparison, can cost $15 to $18 per barrel - or at least five times the expense. Also, because the salt caverns are 2,000-4,000 feet below the surface, geologic pressures will sea; any crack that develops in the salt formation, assuring that no crude oil leaks from the cavern. An added benefit is the natural temperature differential between the top of the caverns and the bottom - a distance of around 2,000 feet; the temperature differential keeps the crude oil continuously circulating in the caverns, giving the oil a consistent quality.
how many grams of oxygen are there in 66.2 g of nitrous acid
Answer:
15.9994 grams
You can view more details on each measurement unit: molecular weight of Oxygen or grams The molecular formula for Oxygen is O. The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles Oxygen, or 15.9994 grams.
Explanation:
Answer:
First you need to know the Chemical formula for Nitrous acid which is HNO₂
Explanation:
Which element contains one set of paired and three unpaired electrons in its fourth and outer main energy level?
Explanation:
Phosphorus (P) because of the 5 valence electrons total, 3 of them are in the 3p sublevel, and according to Hund's rule, they "single-fill" each orbital first.
which of the two pure substance consists of different types of Element
Answer:Two Main Types of Pure Substances
Elements and compounds are the two types of pure substances. Examples of common elements include carbon, nitrogen and hydrogen. They consist of one type of atom and cannot break down into something else. Every pure carbon substance, for example, has the same particles in it.
Explanation:I think
Using charge to describe an atom
Answer:
this atom has nine electrons
Which statement BEST explains why the Moon is visible from the Earth?
1) The Moon reflects light from the Sun.
2) The Moon is always lit up by the Sun for us to see.
3) The Moon reflects light from the Earth.
4) The Moon produces its own light through radiation.
Answer: The answer is the ''The moon is always lit up by the sun for us to see.''
Explanation: The moon is directly illuminated by the sun.