Answer:
The Net working capital is 3025 dollars.
Explanation:
Total current assets in the balance sheet = $4250
The current liabilities in the balance sheet = $975
Account payable = $600
Accrued wages and taxes = $250
Below is the calculation of net operating working capital.
Net working capital = current assets – current liabilities.
Net working capital = 4250 – (975 + 250)
Net working capital = 4250 – 1225
Net working capital = 3025 dollars.
Here, interest will not be considered. So the net working capital is $3025
Norred Corporation has provided the following information: Cost per Unit Direct materials Direct labor Variable manufacturing overhead Fixed manufacturing overhead Sales commissions Variable administrative expense Fixed selling and administrative expense 7.50 3.70 1.60 1.50 $ 045 Cost per Period 121,500 44,500 If 8,000 units are produced, the total amount of indirect manufacturing cost incurred is closest to: A) $120,800 B) $134,300 C) $12,800 D) $121,500
Answer:
$134,300
Explanation:
Total indirect manufacturing cost = (Unit Produced * Variable manufactured overhead) + Fixed manufacturing overhead
= (8,000 * 1.60) + 121,500
=12,800 + 121,150
=$134,300
Hencc, the total amount of indirect manufacturing cost is $134,300
Company F purchased 40% of the outstanding stock of company K on June 30, 20XX. Both of the companies have a December 31st, year end. Company K is a publicly traded company and reports its net income to company F. Company K also pays a hefty dividend to the shareholders of company F. How should company F report the above facts on its December 31, 20XX balance sheet and income statement
Answer and Explanation:
Within the U.S. GAAP, Company F is an owner owning greater than 20 percent but smaller than or equivalent to 50 percent of Company K's stock and is thus considered to have the right to exercise considerable control on Company K's financial affairs.
According to the GAAP, there is nothing exist explicit information that there is no substantial impact.
Company F will use the EQUITY method to compensate for all assets in the 20 to 50 percent ownership range.
Within this approach,
Business F will pass the following journal entry on the purchase of shares in K:
Particulars Debit Credit
Investment In K Dr, XXXXXX
To Cash XXXXXX
(Being cash paid is recorded)
For recording this we debited the investment as it increased the assets and credited the cash as it decreased the assets
If Company K declares net income in Dec 20XX, Company F will instantly recognize its share of income for the proportionate period of keeping the 40 percent (that is 6 months net income) by way of a journal entry is shown below: (Total net income of K × 40 percent × 6 ÷ 12)
Particulars Debit Credit
Investment in K Dr, XXXXXX
To Investment Income -Co. K XXXXXX
(Being the investment is recorded)
For recording this we debited the investment as it increased the assets and credited the investment income as it also increased the income
If Company K pays dividends to company owners F
The investment account reduces by the amount of cash dividend earned, and the below entry must be passed on to F's books:
Particulars Debit Credit
Cash Dr, XXXXXX
To Investment in K XXXXXX
(Being the cash is recorded)
For recording this we debited the cash as it increased the assets and credited the investment as it decreased the assets
Once Company F sells shown above investment it makes a clear entry:
Particulars Debit Credit
Cash Dr, XXXXXX
To Investment in K XXXXXX
(Being the cash is recorded)
For recording this we debited the cash as it increased the assets and credited the investment as it decreased the assets
The investment carrying value come by
= Purchase price + Net income accrued - Dividends received
Any balance shall be debited in respect of losses on the selling of investment in K-equity securities or Credited to Investment in K -Equity Securities Gain on Sale
So this amount of investment in other companies' equity (40 percent), includes forwarding the above-mentioned journal entries, in the buying company's accounts.
Consider the following cash flows: Year Cash Flow 2 $ 22,200 3 40,200 5 58,200 Assume an interest rate of 9 percent per year. a. If today is Year 0, what is the future value of the cash flows five years from now?
Answer:
Total FV= $134,711.26
Explanation:
Giving the following information:
Cash Flow:
Cf2= $22,200
Cf3= $40,200
Cf5= $58,200
Interest rate= 9 percent per year.
To calculate the future value, we need to use the following formula on each cash flow:
FV= PV*(1+i)^n
Cf2= 22,200*(1.09^3)= 28,749.64
Cf3= 40,200*(1.09^2)= 47,761.62
Cf5= 58,200
Total FV= $134,711.26
A financial concept known as "face value" refers to a security's nominal or monetary value as indicated by its issuer. The Total Face Value is $134,711.26.
The given data is:
Cash Flow:
Cf2= $22,200
Cf3= $40,200
Cf5= $58,200
Interest rate= 9 percent per year.
The face value will be calculated as:
FV= PV*(1+i)^n
Cf2= 22,200*(1.09^3)= 28,749.64
Cf3= 40,200*(1.09^2)= 47,761.62
Cf5= 58,200
Total FV= $134,711.26.
The initial cost of the stock, as stated on the certificate, serves as the face value for stocks. In the case of bonds, it refers to the sum that is normally paid in $1,000 increments to the holder at maturity. Bond face values are frequently referred to as "par value" or just "par."
The term "face value" refers to the nominal or monetary worth of a security; the issuing party declares the face value. A stock's face value is its initial purchase price, as stated on its certificate; a bond's face value is the amount that must be paid to the bond's issuer.
Learn more about face value here:
https://brainly.com/question/32159746
#SPJ6
In the Schedule of Cost of Goods Manufactured and Cost of Goods Sold, the cost of goods manufactured is computed according to which of the following equations?
a) Cost of goods manufactured = Total manufacturing costs + Beginning finished goods inventory – Ending finished goods inventory
b) Cost of goods manufactured = Total manufacturing costs + Beginning work in process inventory – Ending work in process inventory
c) Cost of goods manufactured = Total manufacturing costs + Ending work in process inventory – Beginning work in process inventory
d) Cost of goods manufactured = Total manufacturing costs + Ending finished goods inventory – Beginning finished goods inventory
Answer:
Cost of goods manufactured = Total manufacturing costs + Beginning work in process inventory – Ending work in process inventory
Explanation:
Cost of goods sold is the total direct costs of producing the goods sold by a company.
Cost of goods sold = cost of direct materials + cost of direct labour + Manufacturing Overhead + Beginning work in process inventory – Ending work in process inventory
In its 2014 annual report, Campbell Soup Company reports beginning-of-the-year total assets of $8,113 million, end-of-the-year total assets of $8,323 million, total sales of $8,268 million, and net income of $807 million.
a. Compute Campbell?s asset turnover.
b. Compute Campbell?s profit margin on the sale.
c. Compute Campbell?s return on an asset using (1) asset turnover and profit margin and (2) net income.
Return on assets
(1) Assets turnover and profit margin _____%
(2) Net income _____%
Answer:
a. The asset turnover is $1.0061
b. The profit margin on the sale is 9.7605%
c. The return on an asset is 9.82%
Explanation:
a. In order to calculate the company asset turnover we would have to make the following calculation:
asset turnover=Turnover/Average operating assets
According to the given data:
Turnover=$8,268 million
Average operating assets=beginning-of-the-year total assets+nd-of-the-year total assets
Average operating assets=$8,113 million+$8,323 million
Average operating assets=$8,218 million
Therefore, asset turnover=$8,268 million/$8,218 million
asset turnover=$1.0061
b. In order to calculate the company profit margin on the sale we would have to make the following calculation:
profit margin on the sale=Net income*100/sales
Net income=$807 million
Therefore, profit margin on the sale=$807 million*100/$8,268 million
profit margin on the sale=9.7605%
c. In order to calculate the company return on an asset we would have to make the following calculation:
return on an asset=Assets turnover*Profit margin
return on an asset=$1.0061*9.7605%
return on an asset=9.82%
1 points eBookPrintReferences Check my work Check My Work button is now disabled3Item 2Item 2 1 points Today, your dream car costs $65,500. You feel that the price of the car will increase at an annual rate 2.4 percent. If you plan to wait 4 years to buy the car, how much will it cost at that time
Answer:
$72,018.011
Explanation:
Calculation of how much will it cost at that time you plan to wait 4 years to buy the car
Using this formula
Cost =Car cost (Increase in price)^ Number of years
Let plug in the formula
Cost =$65,500(1+0.024)^4
Cost =$65,500(1.024)^4
Cost =$65,500(1.09951162)
Cost =$72,018.011
Therefore the amount that it will cost at that time you plan to wait 4 years to buy the car will be $72,018.011
Understanding cost behavior depends on all of the following except a.intangibles. b.relevant range. c.activity drivers. d.activity bases.
Answer:
a.intangibles.
Explanation:
The cost behavior refers to behavior in which it shows the changes in the cost if there is a change in any kind of activity
It can be based on given range, activity drivers, activity bases but not with the intangible cases as intangible refers to the asset which cannot be visible or even touched like intellectual properties i.e copyrights, patents, goodwill, etc
Hence, the correct option is a.
Juxipi Inc. is well known for having a stronger credit score than its competitors. that is why, buyers are more willing to buy promissory notes from Juxipi than its competitors. Which of the following short-term financing options is being offered by Juxipi Inc. in the given scenario?
a. Short-term bank loans
b. Factoring
c. Trade credit
d. Commercial paper
Answer:
d. Commercial paper
Explanation:
-Short-term bank loans is a loan that has to be paid back in a year.
-Factoring is when a company sells its accounts receivable to another company at a cheaper price.
-Trade credit is a credit that a supplier gives to its clients to make the payments later.
-Commercial paper is a promissory note used by companies to get money to cover short-term liabilities and has a period of time of up to a year.
According to this, the answer us that the short-term financing option that is being offered by Juxipi Inc. in the given scenario is commercial paper.
A retired married customer, age 73, has a portfolio that is invested in Blue Chip stocks and Treasury bonds that provides current income. The customer is concerned that he is paying a very high Federal and State combined income tax rate. An appropriate recommendation for this customer would be to diversify part of his portfolio into an investment in:
Answer:
The answer is Municipal bonds
Explanation:
Municipal bonds are securities(debt securities) issued by states, cities, counties etc. It is generally issued to fund capital project like construction of roads, schools etc.
Municipal bonds are generally valued for being exempt from federal, state or local taxes taxes. Hence, the reason why the customer should invest in this type of bond since the customer is being concerned about high tax that he has been paying.
Find the amount of the payment to be made into a sinking fund so that enough will be present to accumulate the following amount. Payments are made at the end of each period. $95 comma 00095,000; money earns 66% compounded semiannually for 2 and one half2 1 2 years
Answer:
PV= $81,947.83
Explanation:
Giving the following information:
Future value= $95,000
Interest rate= 0.03
Number of periods= 5
To calculate the initial investment required to reach the objective, we need to use the following formula:
PV= FV/(1+i)^n
PV= 95,000/(1.03^5)
PV= $81,947.83
If a firm's beta was calculated as 1.35 in a regression equation, a commonly-used adjustment technique would provide an adjusted beta of Group of answer choices zero or less. between 0.0 and 1.0. between 1.0 and 1.35. greater than 1.35.
Answer: between 1.0 and 1.35
Explanation:
The Market beta is 1 and for this reason all Betas will usually equal 1 on average because they will usually move towards 1.
This means that when adjusted, the Beta will move from it's current number towards 1 so when adjusted, the Beta will be between it's current figure and 1. In this case that is 1.35 so the beta will be between 1 and 1.35.
The formula however is;
Adjusted beta = 2/3(sample beta) + 1/3(1)
= 2/3(1.35) + 1/3
= 1.23
The adjusted figure is 1.23 which is between 1 and 1.35.
Bonds with a face amount $1,000,000, are sold at 96. The entry to record the issuance is
A. Cash 1,000,000
Premium on Bonds Payable 40,000
Bonds Payable 960,000
B. Cash 960,000
Premium on Bonds Payable 40,000
Bonds Payable 1,000,000
C. Cash 960,000
Discount on Bonds Payable 40,000
Bonds Payable 1,000,000
D. Cash 960,000
Bonds Payable 960,000
Answer:
Option C is correct
Explanation:
The cash proceeds from the bond issuance is 96% of its face value i.e 96%*$1,000,000=$960,000
The discount on bonds payable=Face value-cash proceeds
The discount on bonds payable=$1,000,000-$960,000=$40,000
The appropriate entries would be to credit bonds payable with $1000,000 while cash and discount on bonds payable are debited with $960,000 and $40,000 respectively
Nabors Company reported the following current assets and liabilities for December 31 for two recent years: Dec. 31, Current Year Dec. 31, Previous Year Cash $1,430 $1,710 Temporary investments 3,120 3,840 Accounts receivable 7,150 2,610 Inventory 2,340 2,300 Accounts payable 6,500 5,100 Required: a. Compute the quick ratio on December 31 of both years. If required, round your answers to one decimal place. Quick Ratio December 31, current year December 31, previous year b. Is the quick ratio improving or declining?
Answer:
a. Quick ratio for current year =2.16
Quick ratio for current year =2.05
b. Improving
Explanation:
A.
To find quick ratios we need to divide current assets by current liabilities
Quick Ratio = [tex]\frac{currentasssets}{currentliabilities}[/tex]
Current assets Dec 31 current year Dec 31 previous year
Cash $1,430 $1,710
Temporary investment $3,120 $3,840
Accounts receivable $7,150 $2,610
Inventory $2,340 $2,300
Total current assets $14,040 $10,460
Current liability
Account payable $6,500 $5,100
Quick Ratio [tex]\frac{14040}{6500 }[/tex] [tex]\frac{10460}{5100}[/tex]
Quick Ratio 2.16 2.05
B.
As you can see above that in the previous year Nabors company had a quick ratio of 2.05 but it has slightly increased by 0.11 in the current year.
Answer:
Quick Ratio for the current year = 3.78
Quick Ratio for the previous year = 1.6
Explanation:
Nabors Company
Dec. 31, Current Year Dec. 31, Previous Year
Cash $1,430 $1,710
Temporary investments 3,120 3,840
Accounts receivable 7,150 2,610
Inventory 2,340 2,300
Accounts payable 6,500 5,100
Quick Ratio = Cash + Cash Equivalents + Accounts Receivables/ Accounts Payables
Quick Ratio for the current year = $ 1430+ 3120 + 7150/ 6500
= 24570/6500= 3.78
Quick Ratio for the previous year = $ 1710+ 3840 + 2610/ 5100
= 8160/5100= 1.6
A quick ratio less than 1.0 means that the current liabilities exceed the quick assets. a rule of thumb the quick ratio must have a value greater than 1.0 to conclude that the company is unlikely to face near term liquidity problems. . A value less than 1.0 raises the liquidity concerns unless the a company can generate enough cash from inventory sales or if much of its liabilities are not due until late in the next period.
Similarly a value greater than 1.0 can hide a liquidity problem if payable are due shortly and receivables are not collected late until next period.
It is improving.
If a major misdeed is committed by a brokerage that results in a substantial drain on the real estate recovery trust account, what options are available to replenish the fund?
Answer:
Explanation:
Real Estate Recovery Trust Account are accounts that are funded by administrative penalties and dispersed to consumers that are owed damages due to a license holder's conduct and subsequent inability to pay. These licence holders may be charged an additional $10 fee on the renewal date in order to make up for the substantial drain, or receive a special assessment if the replenishment is urgent.
"What is the four-firm concentration ratio for an industry where the top nine firms having following distribution of sales: 20%, 12%, 11%, 10%, 9%, 3%, 6%, 4%, and 3%
Answer:
53%
Explanation:
The computation of the four-firm concentration ratio for an industry is shown below:
= 20% + 12% + 11% + 10%
= 53%
We simply added the top four ratios so that the four firm concentration ratio could come
ANd, the other given percentage would be ignored as it shows the less distribution of sales as compares to the top one
Hence, the ratio is 53%
Choose the most accurate statement: If these projects are mutually exclusive, which project should be chosen by the CEO of the firm if the CEO’s primary objective is to maximize shareholder value? Assume the opportunity cost of capital is 10% for both projects
Answer:
Project A is the better option than Project B.
Explanation:
The NPV of the project will decide which is the option with greater value to shareholders. As we can see that the NPV of Project A at 10% cost of capital is greater than the NPV of Project B at the same 10% cost of capital. So the best option here is Project A as is more in value than project B. Hence the CEO must select Project A.
Oral Roberts Dental Supplies has annual sales of $5,625,000. 80% are on credit. The firm has $475,000 in accounts receivable. Compute the value of the average collection period.
Answer:
The answer is 38 days
Explanation:
The average collection period is the number of days it takes a company to convert its credit sales to cash
Average collection period = (account receivables/average credit sales) x 360 days
Credit sales = 80% of $5,625,000
=0.8 x $5,625,000
=$4,500,000.
Average collection period is therefore,
($475,000/$4,500,000) x 360 days
=0.10555556 x 360days
=38 days
Coronado Industries developed the following data for the current year: Beginning work in process inventory $190000 Direct materials used 94000 Actual overhead 238000 Overhead applied 166000 Cost of goods manufactured 214000 Total manufacturing costs 570000 Coronado Industries's ending work in process inventory is
Answer:
Ending WIP= $546,000
Explanation:
Giving the following information:
Beginning work in process inventory $190,000
Cost of goods manufactured 214,000
Total manufacturing costs 570,000
To calculate the ending work in process, we need to use the following formula:
cost of goods manufactured= beginning WIP + direct materials + direct labor + allocated manufacturing overhead - Ending WIP
214,000= 190,000 + 570,000 - Ending WIP
Ending WIP= $546,000
The production department in a process manufacturing system completed 94,000 units of product and transferred them to finished goods during a recent period. Of these units, 28,200 were in process at the beginning of the period. The other 65,800 units were started and completed during the period. At period-end, 16,700 units were in process. Compute the departments equivalent units of production with repect to direct materials under each of three seperate assumptions, using the weighted average method, then using the FIFO method
a. All direct materials are added to products when processing begins.
b. Beginning inventory is 40% complete to materials and conversion costs. Ending inventory is 75% complete as to materials and conversion costs
c. Beginning inventory is 60% complete as to materials and 40% complete as to conversion costs. Ending Inventory is 30% complete as to materials and 60% complete to conversion costs.
Answer:
Weighted Average Method.
a. 110,700 units
b. 106,525 units
c. 82,090 units
FIFO
a. 85,500 units
b. 95,245 units
c. 99,010 units
Explanation:
Calculation of equivalent units of production with respect to direct materials.
FIFO.
a. All direct materials are added to products when processing begins.
Materials
To finish Opening Work in Process 0
Started and Completed 65,800
Closing Work in process (16,700 × 100%) 16,700
Total equivalent units of production 85,500
b. Beginning inventory is 40% complete to materials and conversion costs. Ending inventory is 75% complete as to materials and conversion costs
Materials
To finish Opening Work in Process (28,200 × 60%) 16,920
Started and Completed (65,800 × 100%) 65,800
Closing Work in process (16,700 × 75%) 12,525
Total equivalent units of production 95,245
c. Beginning inventory is 60% complete as to materials and 40% complete as to conversion costs. Ending Inventory is 30% complete as to materials and 60% complete to conversion costs.
Materials
To finish Opening Work in Process (28,200 × 40%) 11,280
Started and Completed (65,800 × 100%) 65,800
Closing Work in process (16,700 × 30%) 5,010
Total equivalent units of production 82,090
Weighted Average Method.
a. All direct materials are added to products when processing begins.
Materials
Completed and transferred (94,000 × 100%) 94,000
Closing Work in process (16,700 × 100%) 16,700
Total equivalent units of production 110,700
b. Beginning inventory is 40% complete to materials and conversion costs. Ending inventory is 75% complete as to materials and conversion costs
Materials
Completed and transferred (94,000 × 100%) 94,000
Closing Work in process (16,700 × 75%) 12,525
Total equivalent units of production 106,525
c. Beginning inventory is 60% complete as to materials and 40% complete as to conversion costs. Ending Inventory is 30% complete as to materials and 60% complete to conversion costs.
Materials
Completed and transferred (94,000 × 100%) 94,000
Closing Work in process (16,700 × 30%) 5,010
Total equivalent units of production 99,010
In the Chase case, Chase segmented customers based on the types of rewards they preferred. Which segmentation strategy does Chase use?
Answer:
The answer is behavioural segmentation
Explanation:
Behavioral Segmentation is a form of customer segmentation that divides consumers according to behavior patterns as they interact with a company. One of the objectives is to understand how to address the particular needs and desires of customer groups..
It helps us to analyze how consumers used their cards and how much they valued rewards. We have benefit-seeking buyers, Loyalty-oriented purchasing etc
Costs that are incurred in generating revenues during the period, but are not involved in the manufacturing process are referred to as Group of answer choices
The question is incomplete:
Costs that are incurred in generating revenues during the period, but are not involved in the manufacturing process are referred to as Group of answer choices
-Period costs
-Conversion costs
-Product costs
-Factory overhead costs
Answer:
Period costs
Explanation:
-Period costs are costs that can't be related to the production process but to a period of time and they help to earn profits and are recorded as an expense, for example, comissions and administrative expenses.
-Conversion costs is the amount of money that the company uses to transform the raw materials into finished goods.
-Product costs refer to all the costs incurred by a business to create a product.
-Factory overhead costs refers to the costs incurred by a business to create a product but that can't be related to the production process, for example, factory utilities and repairs.
According to this, the answer is that the costs that are incurred in generating revenues during the period, but are not involved in the manufacturing process are referred to as period costs because these are costs that help the company to earn money but that can't be traced to a specific stage of the production process.
A large company is accused of gender discrimination in wages. The following model has been estimated from the company's human resource information.
In (WAGE) = 1.439 + .0834 EDU + .0512 EXPER + .1932 MALE
Where WAGE is hourly wage, EDU is years of education. EXPER is years of relevant experience, and MALE indicates the employee is male How much more do men at the firm earn, on average?
a) $1.21 per hour more than females
b) 19.32% more than females
c) $19.32 per hour
d) $19, 320 more per year than females^2
Answer: b) 19.32% more than females
Explanation:
According to the model for calculating how wages are paid to employees, there is a .1932 coefficient attached to being a male employee. This means that 0.1932 (19.32% ) is added to an employees salary if they are males. This simply means that males are getting paid 19.32% more than other employees in the company which is this case are females.
If Mikael decides to go out with his friends instead of study for his biology test, what is the opportunity cost?
Answer:
Studying his biology test
Explanation:
opportunity cost refers to the cost of the forgone alternative inorder to enjoy another service
Winkin contributes property with a value of $45,000 and Blinkin contributes property with a value of $90,000 to form Boat Corp in exchange for 25 and 50 shares of Boat, respectively. Which shareholder qualifies for Section 351 deferral of any gain or loss
Answer:
Winkin, with 25 shares of Boat Corporation, qualifies for Section 351 deferral of any gain or loss.
Explanation:
IRC Section 351 has this major requirement; it only applies to the exchange of property for voting stock in the corporation. If any shareholder involved in the transaction receives equity for something other than voting stock, e.g. services; the transaction may not qualify for tax deferral.
Tyler Hawes and Piper Albright formed a partnership, investing $112,000 and $168,000, respectively. Determine their participation in the year's net income of $280,000 under each of the following independent assumptions: No agreement concerning division of net income. Divided in the ratio of original capital investment. Interest at the rate of 6% allowed on original investments and the remainder divided in the ratio of 2:3. Salary allowances of $36,000 and $48,000, respectively, and the balance divided equally. Allowance of interest at the rate of 6% on original investments, salary allowances of $36,000 and $48,000, respectively, and the remainder divided equally.
Answer:
Income Summary 280,000 debit
Piper Account 140,000 credit
Tyler Account 140,000 credit
--under no agreement--
Income Summary 280,000 debit
Piper Account 112,000 credit
Tyler Account 168,000 credit
--under capital share --
Income Summary 280,000 debit
Piper Account 112,000 credit
Tyler Account 168,000 credit
--under 2:3 ratio with 6% interest rate --
Income Summary 280,000 debit
Piper Account 134,000 credit
Tyler Account 146,000 credit
--under salaries and equal share of the remainder --
Income Summary 280,000 debit
Piper Account 132,320 credit
Tyler Account 147,680 credit
--under interest, salaries and equal share of the remainder --
Explanation:
If the partners made the proper accounting the income will be stored under income summary account then split accordingly
A) If there is no agreement then, they share equally
b) 112,000 + 168,000 = 280,000
participation
Tyler 112,000/280,000 = 40%
Piper 168,000/280,000 = 60%
application
Tyler 280,000 x 40% 112,000
Piper 280,000 x 60% = 168,000
c)
6% interest
112,000 x 6% = 6,720
168,000 x 6% = 10,080
Remainder: 280,000 - 6,720 - 10,080 = 263,200
ratio:
Tyler 40% (2 / (2+3)) = 105280
Piper 60% (3 / (2+3)) = 157920
Total
Tyler: 105,280 + 6,720 = 112,00
Piper 157,920 + 10,080 = 168,000
with salaries:
280,000 - 36,000 - 48,000 = 196,000
equally divided in 98,000
Tyler 98,000 + 36,000 = 134,000
Piper 98,000 + 48,000 = 146,000
with slaries and interest:
112,000 x 6% = 6,720
168,000 x 6% = 10,080
280,000 - 6,720 - 10,080 - 36,000 - 48,000 = 179,200
Divided equally in 89,600
Tyler 89,600 + 6,720 + 36,000 = 132,320
Piper 89,600 + 10,080 + 48,000 = 147,680
Pie Corporation paid $319,500 to acquire 90 percent ownership of Slice Company on April 1, 20X2. At that date, the fair value of the noncontrolling interest was $35,500. On January 1, 20X2, Slice reported these stockholders’ equity balances:
Answer and Explanation:
As per situation the Journal entries with narrations is here below:-
As per requirement of a
1. Slice Co. investment Dr, $319,500
To Cash $319,500
(Being cash paid is recorded)
2. Slice Co. investment Dr, $27,000
To Income from Slice Co. $27,000
(Being investment is recorded)
3 Cash Dr, $13,500
To Slice Co. investment $13,500
(Being cash is recorded)
As per requirement b
1. Sales Dr, $90,000
To Total Expenses $80,000
To Dividends Declared $5,000
To Retained Earnings $5,000
(Being sales is recorded)
2. Common stock Dr, $160,000
Additional paid-in capital Dr, $40,000
Retained earnings Dr, $155,000
Income from Slice Co. Dr, $27,000
NCI in NI of Slice Co. Dr, $3,000
To Dividends declared $15,000
($1,500 + $13,500)
To Investment in Slice Co. $333,000
($319,500 + $27,000 - $135,00)
To NCI in NA of Slice Co. $37,000
(Being acquisition is recorded)
What program is used to determine employee's bonuses? A. time series B. exponential smoothing C. regression D. weighted moving averages
Answer:
The correct answer is: D. weighted moving averages
Explanation:
To determine employee bonuses, companies use the weighted moving average program.
This is an indicator that works using a calculation that ensures greater relevance to recent data, that is, there is a weighting factor that ensures that weights are differentiated, since it uses the multiplication of factors to differentiate weights in relation to different data.
So it is the ideal program for averaging employee bonuses.
Two mutually exclusive projects have an initial cost of $60,000 each. Project A produces cash inflows of $30,000, $27,000, and $20,000 for Years 1 through 3, respectively. Project B produces cash inflows of $80,000 in Year 2 only. The required rate of return is 10 percent for Project A and 11 percent for Project B. Which project(s) should be accepted and why
Answer:
Project B
Explanation:
The computation of the net present value is shown below:
For project A
(in dollars) (in dollars)
Year Cash flows Discount factor at 10% Present value
0 -60000 1 -60000.00 (A)
1 30000 0.9090909091 27272.73
2 27000 0.826446281 22314.05
3 20000 0.7513148009 15026.30
Total present value 64613.07 (B)
Net present value 4613.07 (B - A)
For project B
(in dollars) (in dollars)
Year Cash flows Discount factor at 11% Present value
0 -60000 1 -60000.00 (A)
1 0 0.9009009009 0
2 80000 0.8116224332 64929.79
3 0 0.7311913813 0
Total present value 64929.79 (B)
Net present value 4929.79 (B - A)
As we can see that project B has high net present value as compared with project A so project B should be accepted
Zen Inc. manufactures two types of products, the G.1 and the T.1 models. The manufacturing process consists of two principal departments: production and assembly. The production department has 58 skilled workers, each of whom works 7 hours per day. The assembly department has 25 workers, who also work a 7-hour shift. On an average, to produce a G.1 model, Zen Inc. requires 3.5 labor hours for production and 2 labor hours for assembly. The T.1 model requires 4 labor hours for production and 1.5 labor hours in assembly. The company anticipates selling at least 1.5 times as many T.1 models as G.1 models. The company operates five days per week and makes a net profit of $130 on the G.1 model, and $150 on the T.1 model. Zen Inc. wants to determine how many of each model should be produced on a weekly basis to maximize net profit. Formulate the problem.Let the number of G.1 product produced each week be G.Let the number of T.1 product produced each week be T.Formulate the problem.MaxabG +Spell checkTsubject toSpell checkG +Spell checkT ?Spell check(production labor constraint)Spell checkG +Spell checkT ?Spell check(assembly labor constraint)T ?Spell checkG (constraint reflecting demand)G, T ?Spell check(non-negativity conditions)
Explanation:
Below is the problem formulation:
Workers:
Production dept. — 58
Assembly dept. — 25
Available work hours each day for each employee per Department:
Production dept. — 7
Assembly dept. — 7
Average Required Labor Hours per Model:
G.1— Production 3.5; Assembly 2
T.1— Production 4; Assembly 1.5
Net Profit per Model
G.1— $130
T.1— $150
Constraints:
For Labor Hours:
Production
i) 3.5G ≤ 7
ii) 4T≤ 7
Assembly
i) 2G ≤ 7
ii) 1.5T ≤ 7
Objective function: Max Z= 130G+ 150T
___ are the criteria the firm uses to screen credit applicants in order to determine which of its customers should be offered credit and how much.
Answer:
Credit standards
Explanation:
The credit standard refers to the guidelines that are issued by the organization which analyzed whether the borrower is eligible for the loan or not. It could be checked by his or her credit score that reflects the full picture of borrower credit history i.e borrower is paying the amount of loan within in the given time or not or he is a defaulter that helps in deciding whether to offer credit or not and by how much