Answer:
The time that passes until the police catch the speeder is 82.6204 seconds.
Explanation:
A body performs a uniformly accelerated rectilinear motion or uniformly varied rectilinear motion when its path is a straight line and its acceleration is constant. This implies that the speed increases or decreases its modulus in a uniform way.
The position is calculated by the expression:
x = x0 + v0*t + 1/2*a*t²
where:
x0 is the initial position. v0 is the initial velocity. a is the acceleration. t is the time interval in which the motion is studied.First, let’s look at the police car’s equations of motion. In this case:
x0= 0 v0= 50 m/s a= 2 m/s²So: x = 50 m/s*t + 1/2*2 m/s²*t²
Now for the speeder’s car’s equations of motion you know:
x0= 3 km= 3,000 m v0= 55 m/s a= 1 m/s²So: x = 3,000 m + 55 m/s*t + 1/2*1 m/s²*t²
When the police catch the speeder they are both in the same position. So:
50 m/s*t + 1/2*2 m/s²*t²= 3,000 m + 55 m/s*t + 1/2*1 m/s²*t²
Solving:
0= 3,000 m + 55 m/s*t + 1/2*1 m/s²*t² - 50 m/s*t - 1/2*2 m/s²*t²
0= 3,000 + 55 *t + 1/2*t² - 50*t - 1*t²
0= 3,000 + 55 *t - 50*t - 1*t² + 1/2*t²
0= 3,000 + 5*t - 1/2*t²
Applying the quadratic formula:
[tex]x1,x2=\frac{-5+-\sqrt{5^{2}-4*(-\frac{1}{2})*3000 } }{2*(-\frac{1}{2} )}[/tex]
x1= -72.6209
and x2= 82.6209
Since you are calculating the value of a time and it cannot be negative, then the time that passes until the police catch the speeder is 82.6204 seconds.
Carousel conveyors are used for storage and order picking for small parts. The conveyorsrotate clockwise or counterclockwise, as necessary, to position storage bins at the storageand retrieval point. The conveyors are closely spaced, such that the operators travel timebetween conveyors is negligible. The conveyor rotation time for each item equals 1 minute;the time required for the operator to retrieve an item after the conveyor stops rotatingequals 0.25 minute. How many carousel conveyors can one operator tend without creatingidle time on the part of the conveyors
Answer:
the number of carousel conveyors that an operator can operate without any idle time is 5
Explanation:
Given the data in the question;
first we express the equation for number of carousel conveyors that can be operated by an operator;
n' = [tex]\frac{(a + t)}{( a + b)}[/tex]
where a is the concurrent activity time ( 0.25 minute )
b is the independent operator activity time
t is the independent machine activity time( 1 )
Now independent activity time is zero as the operator is not performing any inspection or packaging tasks.
So time taken for the operator to retrieve the finished item at the end of the process is the concurrent activity and independent machine activity time, the conveyor rotation time of each item
so
we substitute
0.25min for a, 1 for t and 0min for b
n' = [tex]\frac{(0.25min + 1min)}{( 0.25min+ 0 min)}[/tex]
n' = 1.25 min / 0.25
n' - 5
Therefore, the number of carousel conveyors that an operator can operate without any idle time is 5
What is a measure of how much matter an object is made of?
Answer:
grams
Explanation:
What three factors determine the amount of potential energy in a object are ______,______,and ______.
Answer:
It should be Mass, Gravity and Height
Explanation:
Billy is trying to shine a laser off a mirror at the end of a basketball court into Sam's eyes to distract him (Billy is evil). Sam is at a 38 degree reflection angle from the mirror. At what angle does Billy need to shine the laser at the mirror to get it in Sam's eyes.
Answer:
When we have a plane interface, the angle of incidence of the ray is the same as the angle of reflection.
In this case, we have a mirror (we assume that it is plane) and we know that we need to have an angle of reflection equal to 38° in order to reach Sam.
Then the angle of incidence of the ray must also be exactly 38°.
Then Billy needs to shine his laser at an angle of 38° at the mirror.
(where the angle is measured between the normal line to the surface of the mirror and the incident ray)
Billy needs to shine the laser at an incident angle of 38 degrees.
LASER is an acronym that stands for “light amplification by the stimulated emission of radiation.” We know that according to the laws of reflection, the angle of incidence is equal to the angle of reflection.
As such, knowing that Sam is at a 38 degree reflection angle from the mirror, Billy needs to shine the laser at an incident angle of 38 degrees.
Learn more: https://brainly.com/question/8592296?
A 1.0 C charged object and a 2.0 C charged object are separated by 100 m. Where should a -1.0x10-3 C charged object be placed on a line between the positively charged objects so that the net electrical force exerted on the negatively charged object is zero
Answer:
x = 41.2 m
Explanation:
The electric force is a vector magnitude, so it must be added as vectors, remember that the force for charges of the same sign is repulsive and for charges of different sign it is negative.
In this case the fixed charges (q₁ and q₂) are positive and separated by a distance (d = 100m), the charge (q₃ = -1.0 10⁻³ C)) is negative so the forces are attractive, such as loads q₃ must be placed between the other two forces subtract
F = F₁₃ - F₂₃
let's write the expression for each force, let's set a reference frame on the charge q1
F₁₃ = [tex]k \frac{q_1 q_3}{x^2}[/tex]
F₂₃ = [tex]k \frac{q_2 q_3}{(d-x)^2}[/tex]
they ask us that the net force be zero
F = 0
0 = F₁₃ - F₂₃
F₁₃ = F₂₃
k \frac{q_1 q_3}{x^2} =k \frac{q_2 q_3}{(d-x)^2}
[tex]\frac{q_1}{x^2} = \frac{q_2}{(d-x)^2 }[/tex]q1 / x2 = q2 / (d-x) 2
(d-x)² = [tex]\frac{q_2}{q_1}[/tex] x²
we substitute
(100 - x)² = 2/1 x²
100- x = √2 x
100 = 2.41 x
x = 41.2 m
calculate the peak voltage of a mains supply of 240Vrms.
A baseball player hits a 0.15 kg 0.15kg0, point, 15, start text, k, g, end text baseball that is initially at rest, changing its momentum by 11 kg ⋅ m s 11 s kg⋅m 11, start fraction, start text, k, g, end text, dot, start text, m, end text, divided by, start text, s, end text, end fraction.
Answer:
73.3m/s
Explanation:
We can find the velocity of the player.
Momentum = mass * velocity
Given
Mass = 0.15kg
Momentum = 11kgm/s
Get the velocity
Velocity = Momentum/Mass
Velocity = 11/0.15
Velocity = 73.3m/s
Hence the velocity of the player is 73.3m/s
An ideal monatomic gas initially has a temperature of 300 K and a pressure of 5.79 atm. It is to expand from volume 420 cm3 to volume 1450 cm3. If the expansion is isothermal, what are (a) the final pressure and (b) the work done by the gas
Answer:
a) The final pressure is 1.68 atm.
b) The work done by the gas is 305.3 J.
Explanation:
a) The final pressure of an isothermal expansion is given by:
[tex] T = \frac{PV}{nR} [/tex]
[tex] T_{i} = T_{f} [/tex]
[tex] \frac{P_{i}V_{i}}{nR} = \frac{P_{f}V_{f}}{nR} [/tex]
Where:
[tex]P_{i}[/tex]: is the initial pressure = 5.79 atm
[tex]P_{f}[/tex]: is the final pressure =?
[tex]V_{i}[/tex]: is the initial volume = 420 cm³
[tex]V_{f}[/tex]: is the final volume = 1450 cm³
n: is the number of moles of the gas
R: is the gas constant
[tex] P_{f} = \frac{P_{i}V_{i}}{V_{f}} = \frac{5.79 atm*420 cm^{3}}{1450 cm^{3}} = 1.68 atm [/tex]
Hence, the final pressure is 1.68 atm.
b) The work done by the isothermal expansion is:
[tex] W = P_{i}V_{i}ln(\frac{V_{f}}{V_{i}}) = 5.79 atm*\frac{101325 Pa}{1 atm}*420 cm^{3}*\frac{1 m^{3}}{(100 cm)^{3}}ln(\frac{1450 cm^{3}}{420 cm^{3}}) = 305.3 J [/tex]
Therefore, the work done by the gas is 305.3 J.
I hope it helps you!
Marquette King, formerly of the Denver Broncos, is practicingkicking off using a kicking holder with the ball on the ground.For one of the kicks the ball reaches a height of 90.6 m andlands on the ground 53 yds (48.5 m) away. Find the magnitudeof the initial velocity given by his kick to the ball. Treat airresistance as negligible. Hint: Even though the horizontal andvertical motions are independent, there is a quantity that iscommon to both of them.
Answer:
Explanation:
Maximum height reached = 90.6 m . Range = 48.5 m
. Let u be the initial velocity at angle α .
Horizontal range is covered by horizontal component of u .
Vertical height is achieved by vertical component
v² = u² sin² α - 2gh , t is time taken to attain maximum height .
0 = u² sin² α - 2 x 90.6 x 9.8
u² sin² α = 2 x 887.88 -------( 1 )
Range R = u² sin2α / g
48.5 = 2 u² sinα . cos α / 9.8
u² sinα . cos α = 237.65 ----------------------------- ( 2 )
( 1 ) / ( 2 )
Tan α = 2 x 887.88 / 237.65 = 7.47
α = 82⁰
u² sin² α = 2 x 887.88
u² sin² 82 = 2 x 887.88
u² = 1812
u = 42.56 m /s
Can someone help me answer please
Answer:
4=Conduction by convection by radiation.
Explanation:
Hope it will help you! It may be short but I don't know how to write it in blank aafai milayera lekha Hai blanks ma
Using your knowledge on personal care products, how does sunscreen
lotion protect your skin from the damaging effect of ultraviolet rays?
Explain why of x-rays and gamma rays are commonly used in
radiotherapy.
Answer:
Ultraviolet rays from sun are very harmful from skin and can cause sunburn and skin diseases especially ultraviolet B rays. A sunscreen lotion act as a protection barrier on the skin that restrict the direct contact of UV rays with skin and filter the harmful rays to enter the skin.
Radiotherapy is a medical therapy use to treat cancer. Radiotherapy commonly uses x-rays and gamma rays because they are high-energy particles or waves that kills or destroys the cancer cells.
Sunscreen lotion is able to filter this damaging ultraviolet radiation and prevent it from damaging the skin.
The sun reaches us from outer space brings ultraviolet rays to us. Ultraviolet rays are known to have some damaging effects on the skin. One way to protect our skin from this damaging ultraviolet rays is to use sunscreen lotion which is able to filter this damaging ultraviolet radiation and prevent it from damaging the skin.
X-rays and gamma rays are used in radiotherapy because they are light energy rays which are able to penetrate and destroy malignant cells in the body.
Learn more: https://brainly.com/question/13695751
You drive on Interstate 10 from San Antonio to Houston, half the time at 75 km/h and the other half at 106 km/h. On the way back you travel half the distance at 75 km/h and the other half at 106 km/h. What is your average speed (a) from San Antonio to Houston, (b) from Houston back to San Antonio, and (c) for the entire trip
Answer:
Explanation:
a ) from San Antonio to Houston let distance be d km .
Average speed = total distance / total time
time = distance / speed
Total time = (d / 2 x 75 ) +( d / 2 x 106 )
= .0067 d + .0047 d
= .0114 d
Average speed = d / .0114 d = 87.72 km /h
b ) from Houston back to San Antonio
Total time = (d / 2 x 106 ) +( d / 2 x 75 )
= .0047 d + .0067 d
= .0114 d
Average speed = d / .0114 d = 87.72 km /h
c )
For entire trip :
total distance = 2d
total time = 2 x .0114 d
Average speed = 2 d / 2 x .0114 d
= 87.72 km /h .
Which of the following best describes what were wrong with the scientists study
Fred's lightbulb is 45% efficient, and Fran's is 75% efficient. If they both use the same amount of electric energy, which produces more light energy?
Answer:
Frank's 75% efficient light bulb will shine brighter.
Explanation:
The brightness of a bulb is gotten from the power equation;
P = I²R
The more the power rating in watts, the more the brightness.
Now, if they both use the same amount of energy but yet have different efficiency, it means we will just multiply the efficiency by the power.
Thus, 75% efficiency will yield more power than a 45% efficient one.
Therefore, Frank's light bulb will shine brighter.
A plastic rod 1.6 m long is rubbed all over with wool, and acquires a charge of -9e-08 coulombs. We choose the center of the rod to be the origin of our coordinate system, with the x-axis extending to the right, the y-axis extending up, and the z-axis out of the page. In order to calculate the electric field at location A = < 0.7, 0, 0 > m, we divide the rod into 8 pieces, and approximate each piece as a point charge located at the center of the piece.
Solution :
Length of the plastic rod , L = 1.6 m
Total charge on the plastic rod , Q = [tex]$-9 \times 10^{-8}$[/tex] C
The rod is divided into 8 pieces.
a). The length of the 8 pieces is , [tex]$l=\frac{L}{8}$[/tex]
[tex]$=\frac{1.6}{8}$[/tex]
= 0.2 m
b). Location of the center of the piece number 5 is given as : 0 m, -0.09375 m, 0 m.
c). The charge q on the piece number 5 is given as
[tex]$q=\frac{Q}{L}\times l$[/tex]
[tex]$q=\frac{-9 \times 10^{-8}}{1.6}\times0.2$[/tex]
= [tex]$-1.125 \times 10^{-8}$[/tex] C
d). WE approximate that piece 5 as a point charge and we need to find out the field at point A(0.7 m, 0, 0) only due to the charge.
We know, the Coulombs force constant, k = [tex]$8.99 \times 10^9 \ N.m^2/C^2$[/tex]
So the X component of the electric field at the point A is given as
[tex]$E_x = 8.99 \times 10^9 \times 1 \times 10^{-8} \ \cos \frac{187.628}{0.70625}$[/tex]
= -126.15 N/C
The Y component of the electric field at the point A is
[tex]$E_y = 8.99 \times 10^9 \times 1 \times 10^{-8} \ \sin \frac{187.628}{0.70625}$[/tex]
= -16.93 N/C
Now since the rod and the point A is in the x - y plane, the z component of the field at point A due to the piece 5 will be zero.
∴ [tex]$E_z=0$[/tex]
Thus, [tex]$E= <-126.15,-16.93,0>$[/tex]
A car traveling 85 km/h is 250 m behind a truck
traveling 73 km/h.
Time needed = t = 20.83 s
Further explanationGiven
car speed = 85 km/h
truck speed = 73 km/h
Required
the time it takes for the car to reach the truck
Solution
When the car reaches the truck, the distance between them will be the same
x car - 250 m = x truck
General formula for distance (d) :
d = v.t
So the equation becomes :
85t-250 = 73t
12t=250
t = 20.83 s
Choose the best explanation from among the following:_________.
1. Charge is conserved, and therefore the mass of the object will remain the same.
2. A positive charge increases an object's mass; a negative charge decreases its mass.
3. To give the object a negative charge we must give it more electrons, and this will increase its mass.
Answer: 3. To give the object a negative charge we must give it more electrons, and this will increase its mass.
Explanation:
Suppose we have an object and we negatively charge it.
Then we are "adding" N electrons to the object.
Remember that the mass of an electron is:
m = 9.11*10^(-31) kg
Then if we add N electrons to an object of mass M, the new mass of the object will be:
Mass = M + N*9.11*10^(-31) kg
So we will have an (almost negligible) increase of the mass of the object.
(Something similar can happen if the object is positively charged, where we remove electrons, then the mass of the object decreases)
Then the correct option is:
3. To give the object a negative charge we must give it more electrons, and this will increase its mass.
According to Coulomb's Law, if the distance between two charged particles is doubled, the electric force will be _________. *
Answer: reduced by 1/4
Explanation:
The force will be reduced by 1/4. Try plugging in 2r, then squaring it. You will get 4r^2, which is essentially dividing the force by 4
Points A, B, and C lie along a line from left to right, respectively. Point B is at a lower electric potential than point A. Point C is at a lower electric potential than point B. What would best describes the subsequent motion, if any, of a positively-charged particle released from rest at point B?
Answer:
Please see below as the answer is self-explanatory.
Explanation:
If the potential at B is lower than A, and the potential at C is lower than B, this means that there is an electric field, directed from A to C.If a positively-charged particle is released at rest at point B, it will be accelerated by the electric field (which is a force per unit charge, so it produces an acceleration) in the same direction than the field (because it is a positive charge) towards point C.The "problem of perception" is best characterized as?
Answer:
making sense of a 3-d world from 2-d data
Explanation:
What is the mass of an object if it is moving at a speed of 10 m/s and has 400 J of kinetic energy?
Answers:
8 kg
Explanation:
Kinetic Energy = (mass × velocity × velocity) ÷ 2
We know that Kinetic Energy = 400 J and velocity = 10 m/s.
KE = (m × v × v) ÷ 2
400 J = (m × 10 m/s × 10 m/s) ÷ 2
400 J = m × 50 m^2/s^2
To find the mass you will divide 400 J and 50 m^2/s^2.
m = 8 kg
You can also check it if it gives you 400 J.
KE = (m × v × v) ÷ 2
KE = (8 kg × 10 m/s × 10 m/s) ÷ 2
KE = 400 J
So this means that the mass is 8 kg. I know that it is a bit confusing, but when you do J (joules) ÷ m^2/s^2 = kg (kilograms). Hope this helps, thank you !!
The surface area of a postage
stamp is 0.00600 m^2, and the air
exerts 1.00 atm of pressure on it.
How much force does it exert on
the stamp?
(Hint: The standard unit for
pressure is Pa.)
(Unit = N)
Answer:
Force = 607.95 Newton
Explanation:
Given the following data;
Area = 0.00600 m^2
Pressure = 1 atm to Pascal = 101325 Pa
To find the force;
Pressure = Force/area
Force = pressure * area
Substituting into the equation, we have;
Force = 101325 * 0.00600
Force = 607.95 Newton.
Therefore, the amount of force exerted by the air on the stamp is 607.95 Newton.
A mass of 10. kg is placed on the end of a 0.50-meter pendulum. What is the period of the pendulum?
Answer:
T = 1.41 seconds
Explanation:
Given that,
The mass placed in the pendulum, m = 10 kg
The length of the pendulum, l = 0.5 m
We need to find the period of the pendulum. The relation for the period of the pendulum is given by :
[tex]T=2\pi \sqrt{\dfrac{l}{g}} \\\\T=2\pi \sqrt{\dfrac{0.5}{9.8}} \\\\T=1.41\ s[/tex]
So, the time period of the pendulum is 1.41 seconds.
For anyone that needs the correct answer without POS trolls:
The answer is 1.4 s
Thank me later :)
Connective Tissue in a tendon is
The degree of relationship between two or more variables is _________.
define stress engineering science
Answer:
Stress, in physical sciences and engineering, force per unit area within materials that arises from externally applied forces, uneven heating, or permanent deformation and that permits an accurate description and prediction of elastic, plastic, and fluid behaviour.
I hope it's helpful!
____made up of glucose and fructose and found in plants.
1.Xylose
2.Maltose
3.Lactose
4.Sucrose
Answer:
1.Lactose
I Hope its help for you
Have a good day
One reason why it’s often easy to miss an action-reaction pair is because of the ________ of one of the objects.
Answer:
an action-reaction pair is because one of the objects is often much more massive and appears to remain motionless when a force acts on it. It has so much inertia, or tendency to remain at rest, that it hardly
A river flows with a uniform velocity vr. A person in a motorboat travels 1.22 km upstream, at which time she passes a log floating by. Always with the same engine throttle setting, the boater continues to travel upstream for another 1.45 km, which takes her 69.1 min. She then turns the boat around and returns downstream to her starting point, which she reaches at the same time as the same log does. How much time does the boater spend traveling back downstream
Answer:
t ’= [tex]\frac{1450}{0.6499 + 2 v_r}[/tex], v_r = 1 m/s t ’= 547.19 s
Explanation:
This is a relative velocity exercise in a dimesion, since the river and the boat are going in the same direction.
By the time the boat goes up the river
v_b - v_r = d / t
By the time the boat goes down the river
v_b + v_r = d '/ t'
let's subtract the equations
2 v_r = d ’/ t’ - d / t
d ’/ t’ = 2v_r + d / t
[tex]t' = \frac{d'}{ \frac{d}{t}+ 2 v_r }[/tex]
In the exercise they tell us
d = 1.22 +1.45 = 2.67 km= 2.67 10³ m
d ’= 1.45 km= 1.45 1.³ m
at time t = 69.1 min (60 s / 1min) = 4146 s
the speed of river is v_r
t ’= [tex]\frac{1.45 \ 10^3}{ \frac{ 2670}{4146} \ + 2 \ v_r}[/tex]
t ’= [tex]\frac{1450}{0.6499 + 2 v_r}[/tex]
In order to complete the calculation, we must assume a river speed
v_r = 1 m / s
let's calculate
t ’= [tex]\frac{ 1450}{ 0.6499 + 2 \ 1}[/tex]
t ’= 547.19 s
Elizabeth has always believed that people's thoughts can help heal them. She wants to help people use positive thinking to positively affect their
illnesses. What type of psychology would be MOST appropriate for Elizabeth to study?
Answer: Family
Explanation: