Answer:
Some of the physical and chemical properties of magnesium are:
-The term ‘magnesium’ is derived from the Greek word magnesia, which refers to the name of the place from where it was extracted.
-Magnesium is closely related to manganese and magnetite.
-About 2.1% of the Earth’s crust contains magnesium. This makes magnesium the 6th most found element.
-The biggest deposits of magnesium is found in the seawater. It has been calculated by scientists that a cubic mile of seawater contains about 6 million tons of this element
2nd answer:
Physical Properties of Magnesium: ”I’m a highly stable element, so you can count on me”
Chemical Properties of Magnesium: ”I love to travel but I do corrode aluminum so we won’t be flying off on adventures in airplanes planes anytime soon
Explanation:
Hope this helps you out! UwU
With circulation, the heart provides your body with:
a. oxygen
b. nutrients
C. a way to get rid of waste
d. all of the above
Explanation:
The lungs pump oxygen in and carbon dioxide out, which goes through the blood stream to help with the cell's energy needs.
Nutrients pass through the blood stream as well. The nutrients start with the digestive system (mouth, esophagus, stomach, small intestine) before going into the blood stream. The nutrients are building blocks to help make new cells when old ones die off.
When those cells die off, the body sheds them like dead skin, but internal dead cells are passed off as waste. This waste and other byproducts the body doesn't need passes through the blood stream as well.
In short, the blood stream is basically the highway to help get desired materials (eg: oxygen and nutrients) and get rid of waste (eg: carbon dioxide and other unwanted byproducts or dead cell material)
So that's why the answer includes A, B and C.
How do combination circuits help prevent problems in circuits in a home? If it helps, think about a bedroom since all electrical work in a bedroom is on the same circuit.
what is the percent of mercury?
Answer:
42%
Explanation:
Nio conducts a science experiment. He puts yeast into a bottle with water and sugar, and then caps the bottle with a balloon. He returns two hours later and notices there are bubbles on the surface of the mixture in the bottle and that the balloon has inflated, but there are no other apparent changes.
What most likely happened?
a non-chemical change, because there are no indicators of chemical changes taking place
a chemical change, because the mixture changed color
a chemical change, because a gas was produced
a non-chemical change, because the changes that occurred are reversible
Answer:the answer is a chemical change, because a gas was produced
Explanation: yeast is a chemical
Answer:
The answer is C.
"Chemical changes occur when a substance combines with another to form a new substance, called chemical synthesis or, alternatively, chemical decomposition into two or more different substances. These processes are called chemical reactions and, in general, are not reversible except by further chemical reactions."
Explanation:
What type of graph can show a positive correlation, negative correlation, or no correlation?
A. Pie chart
B. Bar graph
C. Scatter plot
D. Line graph
I need help on Chemistry?
ANYONE PLEASE?
Answer:
1. 1g/ml
Explanation:
1. Density is mass divided by volume (g/mL).
10g/10mL = 1 g/mL
2. When you already know the density and the volume, you can use the density as a unit converter.
[tex]5mL*\frac{20g}{mL} = 100g[/tex]
3. It's the same with density and mass.
[tex]20g*\frac{1mL}{5g} = 4mL[/tex]
____ energy is the energy a roller coaster stores while moving to the top of a hill.
A. G-Force
B.Potential
C. Stirred
D. Kinetic
Answer:
B
Explanation:
trust me im 100% correct
A runner completes a 400m race in 43.9s. What is his average speed?
Answer:
average speed around 9.1 meters/second
Explanation:
400 divided by 43.9
Elements can be described by their properties. Some of these properties are physical properties and some are chemical properties Observe the list provided. Which one of these contains ONLY Cchemical properties
A) C,E,F
B) B,C,E
C) B, E, F
D) C,D,E
Its a c,e,f
Sadly i got it wrong
Flammability, Ability to rust and Ability to tarnish (C,E,F) are chemical properties of an element.
The property of an element is the characteristic feature of that element which helps us to differentiate it from another element.
We have
The Physical proprieties- These are features of an element which we can identify by sight and touch, Some of them include colour, hardness, boiling and ,melting point, size etcChemical properties These are the features of an element which w\e observe when the element has undergone a chemical change which changes its composition. Examples are Flammability, rust, tarnish , corrosion etc.See more here:https://brainly.com/question/2116116
A sealed 512 cm3 flask is full to capacity with 16 g of a substance. Determine the density of the substance.
Answer:
The answer is 0.031 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 16 g
volume = 512 cm³
We have
[tex]density = \frac{16}{512} = \frac{1}{32} \\ = 0.03125[/tex]
We have the final answer as
0.031 g/cm³Hope this helps you
HELP ME OUT PLEASE!! I NEED HELP !
This diagram represents one of the four levels of industry. Which term best
completes the diagram?
Factory employees
Oil refinery workers
Butchers
A. Quaternary sector
OB. Secondary sector
C. Tertiary sector
D. Primary sector
Answer: OB. Secondary Sectors.
Explanation: Make sure to study as the text provided, and study guide state manufacturers, butchers, and factory employees are apart of the secondary sector in the world economy. You’ll do great on Quiz 3.2.5! Make sure to study, have a g’day. Please don’t listen to people who say this answer is falsen as many other questions do, don’t be the one to spread false information as this people’s academics, here’s a picture as well ❤︎. Again, its B!
What is the volume of a weather balloon that has 39 grams of helium with a density 0.017 g/mL?
Answer:
The answer is 235.29 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\ [/tex]
From the question.
density = 0.017 g/mL
mass = 4 g
We have
[tex]volume = \frac{4}{0.017} \\ = 235.2941176...[/tex]
We have the final answer as
235.29 mLHope this helps you
Consider the reaction below. 2 Upper N Upper H Subscript 3 (g) Baseline double headed arrow Upper N Subscript 2 (g) Baseline + 3 Upper H Subscript 2 (g). What is the most likely effect to the forward reaction if there is an increase in pressure on this reaction? The reactant surface area increases. The reaction rate decreases. The reaction is not affected at all. The reaction stops completely.
Answer:
The increase in pressure of the reacting system will increase the formation of NH₃
Explanation:
The given parameters are;
2NH₃ (g) ⇄ N₂ (g) + 3H₂ (g)
The number of molecules in the reactant side of the equation = 2 molecules
The number of molecules in the product side of the equation = 1 + 3 = 4 molecules
Avogadro's law states that equal volume of all gases at a given temperature and pressure contains equal number of molecules
Therefore, given that the number of molecules of the product are twice the number of molecules of the reactant, the volume of the product is twice the volume of the reactant
If the pressure is increased, at constant temperature by Boyles law, the volume will be reduced, favoring the formation of the low volume occupying NH₃
Therefore, the reverse reaction (formation of NH₃) will preferably occur.
Answer:
The answer is B
Explanation:
The other answer is incorrect. The correct Answer is B
Trust Me
Write the principle of separation of mixture.
Explanation:
Mixtures can be separated using a variety of techniques. Chromatography involves solvent separation on a solid medium. Distillation takes advantage of differences in boiling points. Evaporation removes a liquid from a solution to leave a solid material.
Solve for Keq , given the following concentrations at equilibrium. Based on the calculated Keq, are products or reactants larger?
CO2 = 3.0 M O2 = 1.5 M CO = 2.0 M
Answer:
it blows up very lighty
Explanation:
Today scientists know that organisms are much less diverse than Darwin imagined.
True or false?
Answer:
FALSE
Explanation:
they were much more diverse
Each water molecule can form hydrogen bonds with up to _____ neighbors
Group of answer choices
6
8
2
4
Answer:
2
Explanation:
thats the answer.have good day
If air temperature decreases, then
wave height will decrease
ocean temperature will also decrease the same amount
ocean temperature will also decrease, but not as much
ocean temperature will also decrease, but a greater amount
wave height will increase
Answer:
ocean temp
Explanation:
If air temperature decreases, then wave height will decrease and ocean temperature will also decrease, but not as much.
What is ocean temperature ?The water's temperature at the surface is known as the ocean surface temperature. Depending on the measuring technique, the term "surface" might signify anything from 1 millimeter to 20 meters below the sea's surface.
Due to changes in solar radiation and the physical characteristics of water, the temperature of ocean water fluctuates depending on location, both in terms of latitude and depth.
Water contracts and gets denser as it cools. The density of water is influenced by temperature and salinity, and as a result, water moves up or down through the ocean's strata and circulates as currents.
Thus, option B is correct.
To learn more about ocean temperature, follow the link;
https://brainly.com/question/12111508
#SPJ2
1. An atom has 57 neutrons and 42 protons. How many electrons will this atom have if it
neutral?
57
44
42
40
Answer:
42
Explanation:
Because the proton number or atomic number is equal to electron number.
Answer:
42
In order for it to be neutral there must be the same amount of protons and neutrons
Have a nice day! :)
Calculate the volume of this irregular solid to the nearest cubic centimeter.
What is the volume of the key?
Answer:
The answer is 8cm
Explanation:
:)
Answer:
8 cm
Explanation:
All surfaces have texture, which means it affects how things move over it. When it takes a long time for friction to slow down an object, what is most likely true about the surface the object is moving on? The surface is dry. The surface is rough. The surface is uneven. The surface is smooth.
The question is incomplete, the complete question is;
All surfaces have texture, which means it affects how things move over it. When it takes a long time for friction to slow down and object, what is MOST LIKELY true about the surface the object is moving on? (A) The surface is dry (B) The surface is rough (C) The surface is uneven (D) The surface is smooth
Answer:
(D) The surface is smooth
Explanation:
Friction exists because of relative motion between two surfaces in contact with each other. However the magnitude of friction depends on how rough or smooth the surface is.
For smooth surfaces, there is little or no resistance to motion as objects move over the surface. Hence objects take a longer time to slow down on a smooth surface due to very little friction.
On a rough surface, objects tend to slow down relatively quickly. Hence, less resistance to motion on a smooth surface makes an object to take a longer time to slow down on a smooth surface than on a rough surface.
Answer: D
Explanation: Because if the surface is smooth it causes it to be more even for it to be able to cause Friction
if you find this helpful, Your welcome, if not, sorry.
What is your carbon footprint?
the amount of carbon dioxide you use when recycling
the amount of oxygen put into the atmosphere due to your consumption of fossil fuels
the amount of carbon dioxide and oxygen in the atmosphere at any given time
the amount of carbon dioxide put into the atmosphere due to your consumption of fossil fuels
Answer:
c. .....................
Answer: the amount of carbon dioxide put into the atmosphere due to your consumption of fossil fuels
Your carbon footprint is the amount of carbon dioxide and other carbon compounds emitted, because of your use of fossil fuels.
Hope this helps!
What components does the solar system appear to have formed from?
Answer:
I would say a dense cloud of interstellar gas and dust.
Describe the difference between balanced forces and unbalanced forces.
Answer:
If two individual forces are of equal magnitude and opposite direction, then the forces are said to be balanced. An object is said to be acted upon by an unbalanced force only when there is an individual force that is not being balanced by a force of equal magnitude and in the opposite direction.
what is a likely oxidation
state of Chlorine?
a)-1
b) 7
C) -7
d) +1
Answer: a) -1
Explanation:
Which of the following happens to the particles when the temperature of liquid water drops?
Explanation:
when water is in liquid form and the temperature DROPS it becomes solid ice the process is melting , freezing and evaporation this goes in a circle
Based on the results the students record, which group makes the most accurate measurements of the object?
Answer:
B.
Explanation:
It’s because when you subtract 78.5 and 77.5 you get 1. And when you do 79.5 and 78.5 you get 1 too. I know this because I got the answer right
Why is it easy for some elements to lose electrons and harder for others?
Answer:
The further away electrons are from the nucleus the easier it is for atoms to use electrons.
Explanation:
Which of the following atoms has the greatest ionization energy?
a.)W
b.)C
C.)d
P.)d
Answer:
helium
Explanation:
because there are no electrons screening it from the nucleus
Identify the techniques used to separate the components of the given mixtures.
1. Faucet with cloth
2. Nails attracted by magnets
3. Pouring off liquid from rice
4. Sorting buttons with different colors
5. Use of sieve to produce finer sand
Answer: 1.valving , 2. picking, 3. decantation , 4. sorting, 5. seiveing
Thank me later!