Plz answer this question correctly

Answer:

0.011 N-m

Explanation:

Given that

The mass of a solid cylinder, m = 30 kg

The radius of the cylinder, r = 0.18 m

The acceleration of the cylinder, [tex]\alpha =0.023\ rad/s^2[/tex]

It rotates about an axis through its center. We need to find the torque acting on the cylinder. The formula for the torque is given by :

[tex]\tau=I\alpha[/tex]

Where

I is the moment of inertia of the cylinder,

For cylinder,

[tex]I=\dfrac{mr^2}{2}[/tex]

So,

[tex]\tau=\dfrac{mr^2\alpha }{2}\\\\\tau=\dfrac{30\times (0.18)^2\times 0.023 }{2}\\\\\tau=0.011\ N-m[/tex]

So, the required torque on the cylinder is 0.011 N-m.

Answer:

Explanation:

\frac{\lambda }{2} is the minimum interplanar spacing which is required for Bragg's diffraction to occur.

Answer:

In summation, acceleration can be defined as the rate of change of velocity with respect to time and the formula expressing the average velocity of an object can be written as: a =Δ v/ Δt The other 4 equations: d = vit+ (1/2) at2

Explanation:

The vertical forces add up to zero.

The net force on the object is 60N to the right.

F = m • a

60N right = (10kg) • (a)

a = (60N right) / (10kg)

a = 6 m/s^2 to the right

Multi-engine Commercial would be nice.

Answer:

I think it's A, I'm not sure though

Answer:

[tex]m=90.1kg[/tex]

Explanation:

From the question we are told that

Force F=39400

Initial speed [tex]V_1=35m/s[/tex]

Distance[tex]d=1.4m[/tex]

Generally the equation for acceleration is mathematically given by

[tex]a=\frac{V^2-U^2}{2d}[/tex]

[tex]a=\frac{0^2-35^2}{21.4}[/tex]

[tex]a=\frac{0^2-35^2}{21.4}[/tex]

[tex]a=-437.5m/sec^2[/tex]

Generally the equation for mass is mathematically given by

[tex]F=ma\\m=F/a[/tex]

[tex]m=\frac{-39400}{-437.5}[/tex]

[tex]m=90.1kg[/tex]

Explanation:

K.E =1/2 mv^2

=1/2(156789)(45.6)^2

=78,394.5 × 2,079.36

=163,010,387.52 kg m/s

This should be your answer.

Answer:

Workdone = 0.67 Joules

Explanation:

Given the following data;

Workdone = 6J

Extension = 43 - 28 = 15cm to meters = 15/100 = 0.15m

The workdone to stretch a string is given by the formula;

Workdone = ½ke²

Where;

k is the constant of elasticity.

e is the extension of the string.

We would solve for string constant, k;

6 = ½*k*0.15²

6 = ½*k*0.0225

Cross-multiplying, we have;

12 = 0.0225k

k = 12/0.0225

k = 533.33N/m

a. To find the workdone when e = 33, 38.

Extension = 38 - 33 = 5 to meters = 5/100 = 0.05m

Workdone = ½*533.33*0.05²

Workdone = 266.67 * 0.0025

Workdone = 0.67 Joules

Therefore, the amount of work (in J) needed to stretch the spring from 33 cm to 38 cm is 0.67.

Answer:

Uhm thags hsed

Explanation:

Dkrr

Answer:

The point is neither maximum constructive interference nor perfect destructive interference, the interference is something in between.

Explanation:

Given data in the question;

first we find the wavelength of the sound λ

Then we find the path-length difference to the point from the two speakers, and divide it by the wavelength.

wavelength λ  = velocity / frequency = 340 m/s / 1700 Hz = 0.2 m

L1 = 4 m

L2 = √(4² +2² ) m

delta L = L2 - L1 = √(4² +2² ) m - 4 m = 0.472 m

x = deltaL / λ

If the result is nearly an integer, the waves reinforce at the point.

If it is nearly an integer + 0.5, the waves interfere destructively at the point.

If it is neither, the point is "something in between".

so we solve for  x

x = 0.472 m / 0.2m

x = 2.36

since its not an integer, it is not point maximum constructive interference

delta L = ( 2x + 1 ).λ/2

x = ((2deltaL/λ) - 1)/2

x = (((2×0.472)/0.2) - 1)/2

x = 3.72 / 2

x = 1.86

Here also, it is not an integer, so it is not a point perfect destructive interference.

Therefore, The point is neither maximum constructive interference nor perfect destructive interference, the interference is something in between.

Option 3) a Soccer Ball

will travel the farthest distance.

Answer:

a bowling ball

pls follow me and Mark as brainliest and follow me to get free thanks to all your answers

Answer:

150

Explanation:

Answer:Light is made up of wavelengths of light, and each wavelength is a particular colour. The colour we see is a result of which wavelengths are reflected back to our eyes. The visible spectrum showing the wavelengths of each of the component colours. The spectrum ranges from dark red at 700 nm to violet at 400 nm.  

Explanation:

hope it helps

Answer:When light hits an object, the object reflects some of that light and absorbs the rest of it. Some objects reflect more of a certain wavelength of light than others. That's why you see a certain colour. For example, a lemon reflects mainly yellow light.

Explanation:

Answer:

Δλ = 3*10⁻³ m.

Explanation:

       [tex]v = \lambda* f (1)[/tex]

       where v is the speed, λ is the wavelength and f is the frequency.

       [tex]\lambda = \frac{v}{f} (2)[/tex]

        [tex]\lambda_{1} =\frac{v}{f_{1}} = \frac{343m/s}{440(1/s)} = 0.779 m (3)[/tex]

        [tex]\lambda_{2} =\frac{v}{f_{2}} = \frac{343m/s}{442(1/s)} = 0.776 m (4)[/tex]

       [tex]\Delta \lambda = \lambda_{1} - \lambda_{2} = 0.779 m - 0.776m = 3e-3 m (5)[/tex]

       ⇒ Δλ = 3*10⁻³ m.

Answer:

Explanation:

The coordinate sketch for the system is shown in the attached file below. Also, in the cartesian coordinate system, since the height is less than the length and width, we did neglect the height. Thus, we eliminate the height and converted it to a two-dimension.

Answer:

v = 7.74 m/s

Explanation:

Given that,

The acceleration of the object, a = 12 m/s²

The radius of the circle, r = 5 m

We need to find the velocity of the object. The centripetal acceleration act on the object that is given by :

[tex]a=\dfrac{v^2}{r}\\\\v=\sqrt{ar} \\\\v=\sqrt{12\times 5} \\\\v=7.74\ m/s[/tex]

So, the velocity of the car is 7.74 m/s.

Answer:

yes

Explanation:

earth has gravity force that is high than the moon gravity force which is 1/6 of earth gravity

Earth has gravity force that is high than the moon gravity force which is 1/6 of earth gravity.

A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

The force on the moon is less than earth as gravity is 1/6 on the moon

When man jump than he will jump high on the moon than the earth.

Earth has gravity force that is high than the moon gravity force which is 1/6 of earth gravity.

To learn more about force refer to the link:

brainly.com/question/13191643

#SPJ2

This question is incomplete, the complete question is;

A positive charge of magnitude Q1 = 6.5 nC is located at the origin.

A negative charge Q2 = -3.5 nC is located on the positive x-axis at x = 16.5 cm from the origin. The point P is located y = 10.5 cm above charge Q2.

Calculate the x-component of the electric field at point P due to charge Q1. Write your answer in units of N/C.

Answer:

the x-component of the electric field at point P due to charge Q1 is 1291.33 N/C    

Explanation:

Given the data in the question;

Q1 = 6.5 nC, Q2 = -3.5 nC

from the image below, to get our angle ∅

tan∅ = opp/adj

tan∅ = 10.5 / 16.5

tan∅ = 0.636363

∅ = tan⁻¹( 0.636363 )

∅ = 32.47°

also, r1 = √( 16.5² + 10.5²)

r1 = √( 272.25 + 110.25 )

r1 = √382.5

r1 = 19.55 cm = 0.1955 m

Now, the x-component of the electric field at point P due to charge Q1 will be;

Ex = E2cos32.47°

= (kQ1/r1²)cos32.47°

we know that;  k is Coulomb's law constant ( 9 × 10⁹ N.m²/ C²

Q1 = 6.5 nC = 6.5 × 10⁻⁹ C

so we substitute

= ((9 × 10⁹ × 6.5 × 10⁻⁹) / (0.1955)²) cos32.47°

= (58.5 / 0.03822025) × 0.843672

= 1291.33 N/C

Therefore, the x-component of the electric field at point P due to charge Q1 is 1291.33 N/C

Answer:

answer is b

Explanation:

Answer:

interna

Explanation:

please mark as brainllest

Answer:

b.. a difficulty of changing an object's motion, that's my ✨ g u e s s ✨

Answer:

smallest area of the heel is 0.000168  m^2

Explanation:

Recall that pressure is defined as: Force / area. Therefore to reach a pressure of 3,500,000 Pa using a force: m * g = 60 kg * 9,8 m/s^2 = 588 N, one needs:

Area = 588 / 3500000 m^2 = 0.000168  m^2

Answer:

I think the answer is c electrical, and light , sound hewt

Answer:

1➡️ this is the method of decomposition

2➡️ H2 and O2

3➡️ b

sorry if I am wrong

Answer:

60V

Explanation: . V = IR = 1

30*2=60

Answer:

1 st one

Explanation:

The interactions between water molecules as the temperature in the system decreases b) The interaction between the molecule will become stronger

Molecular interactions are attractive or repulsive forces between molecules and between non-bonded atoms

When temperature of the system  decreases the average kinetic energy of the molecules decreases and they move slowly , the  molecular motion get decreased , if the molecules are near each other , the slower they go , more will be molecular interactions , the intermolecular forces attract them to each other  .

the correct answer is :

b) The interaction between the molecule will become stronger

learn more about molecular interactions

https://brainly.com/question/24110424?referrer=searchResults

#SPJ3

Answer:

Galileo Galilei pioneered the experimental scientific method and was the first to use a refracting telescope to make important astronomical discoveries

Explanation:

Yes I agree with this. He made significant scientific discoveries that changed the way of life.

20 push ups

hope thats correct^^

Answer:

22.5 hp

Explanation:

The power delivered to an object is given by :

[tex]P=F\times v[/tex]

Where

F is force and v is velocity of the car.

For the same force, power is directly proportional to the velocity.

So,

[tex]\dfrac{P_1}{P_2}=\dfrac{v_1}{v_2}\\\\P_2=\dfrac{P_1v_2}{v_1}\\\\P_2=\dfrac{15\times 30}{20}\\\\P_2=22.5\ hp[/tex]

So, the new power is 22.5 hp.