Plz answer me will mark as brainliest ​

Answer:

ok so u have take the 5 and put 6

Explanation:

5-5. Ethernet network design: UTP connections from client PC and server to workgroup switches, 900m fiber optic link between switches, 800 Mbps communication.

5-6. Additional client connects to the same switch, UTP connection, maintains existing fiber optic link, 800 Mbps communication with the server.

5-5. For connecting a single client PC to a single server, both located 900 meters apart and requiring communication at 800 Mbps, the following Ethernet network design can be implemented:

- Client PC and server connect to their respective workgroup switches via UTP.

- Use fiber optic cables for the 900-meter transmission link between the switches.

- Install switches at the client PC and server locations.

- Ensure that the switches support at least 1 Gbps Ethernet speeds to accommodate the required transmission speed.

5-6. In addition to the previous design, for adding another client next to the first client:

- Connect both clients to the same switch.

- Use UTP cables to connect the second client to the switch.

- Ensure the switch supports 1 Gbps Ethernet speeds.

- Maintain the existing fiber optic transmission link between the switches.

- The second client can also communicate with the server at the required 800 Mbps transmission speed.

Learn more about Network Design at:

https://brainly.com/question/7181203

#SPJ2

Answer:

The equivalent if statements is:

ranforce = randi([0, 12]);

if (ranforce == 0)

     disp('There is no wind')

else  if(ranforce>0 && ranforce <7)

     disp('There is a breeze')

else  if(ranforce>6 && ranforce <10)

     disp('This is a gale')

else  if(ranforce>9 && ranforce <12)

     disp('It is a storm')

else  if(ranforce==12)

     disp('Hello, Hurricane!')

end

Explanation:

The solution is straight forward.

All you need to do is to replace the case statements with corresponding if or else if statements as shown in the answer section

Answer:

The answer to this question is given below in the explanation section.

Explanation:

The correct answer to this question is an online decision support system. Because the decision support systems process the data, evaluate and predict the decision, and helps the decision-makers,  and offer real-time information immediately in making the decision in an organization. So the correct answer to this question is the decision supports system.

Why other options are not correct

Because the transaction processing system can only process the transaction and have not the capability to make the decision for the future. Office support processing system support office work, while the batch processing system process the task into the batch without user involvement.   however, online executive processing does not make decisions and offer timely information to decision-makers in an organization.

Answer: the answer is A.

Explanation: He has to listen to what the people tell him and think about the information he has and make a choice on what to reply with.

Answer:

Written in Python

numVal = int(input("Input: "))

for i in range(numVal,0,-1):

    print(i)

print("Ready!")

Explanation:

This line prompts user for numVal

numVal = int(input("Input: "))

This line iterates from numVal to 1

for i in range(numVal,0,-1):

This line prints digits in descending order

    print(i)

This line prints the string "Ready!"

print("Ready!")

Answer:

when a file is double clicked it opens so you can see the file.

Explanation:

Answer:

The solution is provided in the explanation section.

Detailed explanation is provided using comments within the code

Explanation:

import java.util.*;

public class Main {

//The Bubble sort method

public static void bb_Sort(int[] arr) {  

   int n = 10; //Length of array  

   int temp = 0; // create a temporal variable  

   for(int i=0; i < n; i++){  

         for(int j=1; j < (n-i); j++){  

           if(arr[j-1] > arr[j]){  

               // The bubble sort algorithm swaps elements  

               temp = arr[j-1];  

               arr[j-1] = arr[j];  

               arr[j] = temp;  

             }  

         }            

         }  

        }

 public static void main(String[] args) {

   //declaring the array of integers

   int [] array = new int[10];

   //Prompt user to add elements into the array

   Scanner in = new Scanner(System.in);

   //Use for loop to receive all 10 elements

   for(int i = 0; i<array.length; i++){

     System.out.println("Enter the next array Element");

     array[i] = in.nextInt();

   }

   //Print the array elements before bubble sort

   System.out.println("The Array before bubble sort");

   System.out.println(Arrays.toString(array));

   //Call bubble sort method

   bb_Sort(array);  

   System.out.println("Array After Bubble Sort");  

   System.out.println(Arrays.toString(array));

 }

}

Answer:

import random

decisions = int(input("How many decisions: "))

for i in range(decisions):

   number = random.randint(0, 1)

   if number == 0:

       print("heads")

   else:

       print("tails")

Explanation:

*The code is in Python.

import the random to be able to generate random numbers

Ask the user to enter the number of decisions

Create a for loop that iterates number of decisions times. For each round; generate a number between 0 and 1 using the randint() method. Check the number. If it is equal to 0, print "heads". Otherwise, print "tails"

Answer:

C and G

Explanation:

In C language, the asterisks, ' * ', and the ampersand, ' & ', are used to create pointers and references to pointers respectively. The asterisks are used with unique identifiers to declare a pointer to a variable location in memory, while the ampersand is always placed before a variable name as an r_value to the pointer declared.

Answer:

270 nsec

Explanation:

Ripple-carry adder is a combination of multiple full-adders. It is relatively slow as each full-adder waits for the output of a previous full-adder for its input.

Formula to calculate the delay of a ripple-carry adder is;

  = 2( n + 1 ) x D

delay in a full-adder = 150 nsec.

number of full-adders = number of ripple-carry bits = 8

 = 2 ( 8 + 1 ) x 150

 = 18 x 150

 = 270 nsec

Answer:

the clock rate of the first machine need to be 1.7 GHz

Explanation:

Given:

CPI of A = 1.9

CPI of B = 1.1

machine, B executes the same program with 20% less instructions and with a CPI of 1.1 at 800MHz

To find:

In order for the two machines to have the same performance, what does the clock rate of the first machine need to be

Solution:

CPU execution time = Instruction Count * Cycles per Instruction/ clock rate

CPU execution time = (IC * CPI) / clock rate

(IC * CPI) (A) / clock rate(A) =  (IC * CPI)B / clock rate(B)

(IC * 1.9) (A) / clock rate(A) = (IC * (1.1 * (1.0 - 0.20)))(B) / 800 * 10⁶ (B)

Notice that 0.20 is basically from 20% less instructions

(IC * 1.9)  / clock rate = (IC * (1.1 * (1.0 - 0.20))) / 800 * 10⁶

(IC * 1.9)  / clock rate =  (IC*(1.1 * ( 0.8))/800 * 10⁶

(IC * 1.9)  / clock rate =  (IC * 0.88) / 800 * 10⁶

clock rate (A) =  (IC * 1.9) / (IC * 0.88) / 800 * 10⁶

clock rate (A) =  (IC * 1.9) (800 * 10⁶) /  (IC * 0.88)

clock rate (A) = 1.9(800)(1000000)  / 0.88

clock rate (A) =  (1.9)(800000000)  / 0.88

clock rate (A) = 1520000000  / 0.88

clock rate (A) = 1727272727.272727

clock rate (A) = 1.7 GHz

Answer:

See solution below

See comments for explanations

Explanation:

import java.util.*;

class Main {

 public static void main(String[] args) {

   //PrompT the User to enter a String

   System.out.println("Enter a sentence or phrase: ");

   //Receiving the string entered with the Scanner Object

   Scanner input = new Scanner (System.in);

   String string_input = input.nextLine();

   //Print out string entered by user

   System.out.println("You entered: "+string_input);

   //Call the first method (GetNumOfCharacters)

   System.out.println("Number of characters: "+ GetNumOfCharacters(string_input));

   //Call the second method (OutputWithoutWhitespace)

   System.out.println("String with no whitespace: "+OutputWithoutWhitespace(string_input));

   }

 //Create the method GetNumOfCharacters

   public static int GetNumOfCharacters (String word) {

   //Variable to hold number of characters

   int noOfCharactersCount = 0;

   //Use a for loop to iterate the entire string

   for(int i = 0; i< word.length(); i++){

     //Increase th number of characters each time

     noOfCharactersCount++;

   }

   return noOfCharactersCount;

 }

 //Creating the OutputWithoutWhitespace() method

 //This method will remove all tabs and spaces from the original string

 public static String OutputWithoutWhitespace(String word){

   //Use the replaceAll all method of strings to replace all whitespaces

   String stringWithoutWhiteSpace = word.replaceAll(" ","");

   return stringWithoutWhiteSpace;

 }

}

Answer:

a task and a calendar entry

Explanation:

ITS RIGHT

Answer:

its A) a task and a calendar entry

Explanation:

correct on e2020

Answer:

Press and hold the power button for up to 10 seconds, until your Mac turns off. If that doesn't work, try using a cellular device to contact Apple Support.

Explanation:

If that also doesn't work try click the following keys altogether:

(press Command-Control-Eject on your keyboard)

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This makes the laptop (macOS) instruct to restart immediately.

Hopefully this helps! If you need any additional help, feel free and don't hesitate to comment here or private message me!. Have a nice day/night! :))))

Another Tip:

(Press the shift, control, and option keys at the same time. While you are pressing those keys, also hold the power button along with that.)

(For at least 10 seconds)

public class Drive {

   int miles;

   int gas;

   String carType;

   public String getGas(){

       return Integer.toBinaryString(gas);

   }

   public Drive(String driveCarType){

       carType = driveCarType;

   }

   public static void main(String [] args){

       System.out.println("Hello World!");

   }

}

I'm pretty new to Java myself, but I think this is what you wanted. I hope this helps!

Answer:

lookup value

Explanation:

Answer:

DNS

Explanation:

Hope this helps

since this has already been answered, who is your favorite SMP character?

mines Wilbur/ Ghostbur

some people will disagree with me but jshlatt is one of my favorite characters on the dream smp . But my all time favorite characters is ALL of Wilbur's characters

Answer:

4096 VLANs

Explanation:

A VLAN (virtual LAN) is a group of devices on one or more LAN connected to each other without physical connections. VLANs help reduce collisions.

An 802.1Q Ethernet frame header has VLAN ID of 12 bit VLAN field. Hence the maximum number of possible VLAN ID is 4096 (2¹²).  This means that a switch supporting the 802.1Q protocol can have a maximum of 4096 VLANs

A lot of VLANs ID are supported by a switch. The maximum number of VLANs that can be configured on a switch supporting the 802.1Q protocol is 4,094 VLANS.

But that of 0x000 and 0xFFF are set apart. This therefore makes or leaves it as 4,094 possible VLANS limits. Under IEEE 802.1Q, the maximum number of VLANs that is found on an Ethernet network is 4,094.

Learn more about VLANs from

https://brainly.com/question/25867685

Answer:

True

Operating System

Booting

Answer:

The correct answer to this question is given below in the explanation section.

Explanation:

in most programming languages, the print() function is used to display a string value to the screen. Because, the print function prints all the string given in it as a parameter.

for example: to print hello world.

we use the function to print hello world as print("hello world").

However, it noted that other options are not correct because the main() function is an entry point of a program and it does not print string value to the screen. while run and show function do not print string value of screen also.

Answer:

in python print()

Answer:

4

Explanation:

Input/output, datapath, control, and memory

There wrong its C bold it.

:)))))