plsssss asappppppppp

Answer:

the right answer is option 2

Answer:

400N

Explanation:

F= ma

F= 100 x 4

F= 400N

Answer:

(This will depend on the type of fuel, I will assume that the fuel is petrol)

First, let's find the expected energy consumption in the US for the next 10 years.

We know that in one year, a person consumes 3.5*10^11 joules.

There are 310,000,00 people on the US

Then the total consumption in one year is:

310,000,000*3.5*10^11 joules = 1.085*10^20 J

In 10 years the consumption is 10 times the consumption of a single year, then the expected energy consumption in the US for the next 10 years is:

10*1.085*10^20 J = 1.085*10^21 J

Now let's find the mass of fuel required.

We know that a liter of petrol has 31,536,000 joules of energy,

And a liter of petrol weights 0.75 kg

To find the number of liters of petrol that we need, we need to find the quotient between the expected energy consumption in the next 10 years and the energy of a single liter of petrol, this is:

N = (1.085*10^20 J)/(31,536,000 j) = 3.44*10^13

We will need  3.44*10^13 liters of petrol.

And the total mass of petrol will be:

M = 3.44*10^13*0.75 kg = 2.58*10^13 kg of fuel.

Answer: the divergent one goes where it looks like there a crack because when you think about divergent it means dividing like seperating.(igneous rock) is where the divegent one goes.

the one that is no plate boundary is sedimentary rock and it occurs by because there is nothing there for it todo there

Explanation:

Answer:

B

Explanation:

remember that you are looking for the value of the graph

to take into account or value a lot: prize, estimate to value your opinion. 2nd: estimate or assign the monetary value of: appraise a necklace. b: qualify or scale in utility, importance or general value: evaluate. value.

Answer:

Polished surfaces reduce heat loss

Answer:

A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.

Explanation:

Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).

The period is the time that elapses between the emission of two consecutive waves. In other words, it is the time it takes for a complete wave to pass a reference point. The period (T) is simply the inverse of the frequency (f):

[tex]T=\frac{1}{f}[/tex]

In this case, f=5*10¹⁰ Hz. So, replacing in the definition of period T:

[tex]T=\frac{1}{5*10^{10} Hz }[/tex]

Solving:

T= 2*10⁻¹¹ seconds

A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.

A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.

The fequency is defined as the number of cycles achieved by the any wave it is expressed in hertz.

Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).

The period is the time that elapses between the emission of two consecutive waves. In other words, it is the time it takes for a complete wave to pass a reference point. The period (T) is simply the inverse of the frequency (f):

[tex]T=\dfrac{1}{f}[/tex]

In this case, f=5*10¹⁰ Hz. So, replacing in the definition of period T:

[tex]T=\dfrac{1}{5\times 10^{10}}=2\times 10^{-11}\ Sec[/tex]

A microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.

Thus a microwave with a frequency of 5*10¹⁰ hertz has a period of 2*10⁻¹¹ seconds.

To know more about Frequency follow

https://brainly.com/question/25699025

Answer:

The collision is inelastic

Explanation:

There are two kinds of collision; elastic collision and inelastic collision. In an elastic collision, both momentum and kinetic energy are conserved.

However, in an inelastic collision, kinetic energy is not conserved. So, when the bumper of two cars collide, the cars come to a stop because the collision is inelastic.

Answer:

nuclear fission

Answer:

C. Photosynthesis

Explanation:

Photosynthesis is a process by which plants and photosynthetic bacteria obtain their food in presence of sunlight from water and carbon dioxide. They produce glucose as the food and oxygen is emitted as the byproduct. The equation for photosynthesis is - 6H2O+6CO2 → C6H12O6 + 6O2

Thus, the correct answer is 'C.Photosynthesis.'

Correct question:

Imagine that a 1200 kg vehicle speeds up from rest to 20.0 m/s in 80 s.

How much work was done on the car? (Answer in 3 sig figs)

Answer:

the work done on the vehicle is 2.40 x 10⁵ J

Explanation:

Given;

mass of the vehicle, m = 1200 kg

initial velocity of the vehicle, u = 0

final velocity of the vehicle, v = 20 m/s

time of motion of the vehicle, t = 80 s

The distance moved by the vehicle is calculated as;

[tex]s = (\frac{v + u}{2} )t\\\\s = (\frac{20+ 0}{2} )(80)\\\\s = 800 \ m[/tex]

The force applied to the vehicle is calculated as;

[tex]F = ma = \frac{m v}{t} = \frac{1200 \times 20}{80} = 300 \ N\\\\[/tex]

The work done on the vehicle is calculated as;

W = F x d

W = 300 x 800

W = 2.4 x 10⁵ J.

Therefore, the work done on the vehicle is 2.40 x 10⁵ J

Answer:

B. It changes the objects direction

Answer:

Explanation:

When resistors are connected in parallel combination, then equivalent resistance is given by,

[tex] \to \quad \bf{ \dfrac{1}{R_1} + \dfrac{1}{R_2} =\dfrac{1}{R_p}}[/tex]

Inserting values,

[tex] \to \quad \bf { \dfrac{1}{R_1} + \dfrac{1}{R_2} =\dfrac{1}{R_p} } \\ \\ \to \quad \bf { \dfrac{1}{R_1} + \dfrac{1}{221} =\dfrac{1}{120.7} } \\ \\ \to \quad \bf { \dfrac{221+R_1}{(R_1)(221)} =\dfrac{1}{120.7} } \\ \\ \to \quad \bf { \dfrac{221+R_1}{221R_1} =\dfrac{1}{120.7} } \\ \\ \to \quad \bf { 120.7(221+R_1) = 221R_1(1)} \\ \\ \to \quad \bf { 26674.7 + 120.7R_1= 221R_1} \\ \\ \to \quad \bf { 26674.7= 221R_1- 120.7R_1} \\ \\ \to \quad \bf { 26674.7 = 100.3R_1} \\ \\ \to \quad \bf { \dfrac{26674.7 }{100.3} =R_1} \\ \\ \to \quad\underline{\boxed{ \bf { 265.9 \; \Omega=R_1}}} \\ [/tex]

increase air resistance, which decreases gravitational acceleration

Answer:

The Magnitude of the angle of reflection equals that of Incidence from the Law of reflection

So its 50°.

Explanation:

Q.1 - V = u + at

u = 0, a = g = 9.8, t = 1

V = 0+9.8*1 = 9.8 m/s

Q 2- In horizontal position the velocity remains same hence a= dv/t, since change in velocity is zero the acceleration also equal to zero

Q.3- After neglecting the air resistance at 45° angle the maximum range is obtained.

let's prove, consider the range have maximum angle at θ, now range is given by

R = u²Sin2θ/g where sin2θ can we written as 2sinθ.cosθ.

Now the range value is directly proportional to the product of sin & cos of firing angle & this maximum value is obtained at 45°

Q.4 The range of two angle will be same if and only if they give 90° on addition.

20+x = 90,

x = 90-20 = 70°

Q.5 The motion with constant acceleration is known as uniformly accelerated motion.

Thanks for joining brainly community!

Answer:

Explanation:

1.

u=0m/s

v=?

a=9.8m/s²

t=1sec

now

we have

v=u+at

v=0+9.8*1

v=9.8m/s

3.

angle is measured in sin and cos angle where maximum angle's value is gained by 45°

4.

we have

range

R=[tex]\frac{u²sin2\theta}{g}[/tex]

For

angle =20°

R1=[tex]\frac{u²sin2*20}{g}[/tex].......[1]

another angle be [tex]\theta[/tex]

R2=[tex]\frac{u²sin2\theta}{g}[/tex].......[2]

since R1=R2

By comparing we get

Sin40=Sin([tex]2\theta[/tex])

Sin(180-40)=Sin([tex]2\theta[/tex])

we

140=[tex]2\theta[/tex]

[tex]\theta[/tex]=70°

Answer:

how tightly strung the wire is

-- Make the string tighter or looser.

-- Keep the same length, but make the string thicker or thinner.

-- Touch the string at a point exactly 1/2, 1/3, 1/4, or 1/5 of its length from one end.

Answer:

1. The specific heat of the meatal is approximately 0.266 J/(g·°C)

2. 46.6334 kJ

Explanation:

1. The given mass of the sample of metal, m = 110.0 g

The temperature change of the metal when heat is added, ΔT = 10.0°C

The amount of head that was added, ΔH = 70.0 Calories = 292.88 Joules

The formula for heat heat capacity of a material is given as follows

Q = m × c × ΔT

Where;

Q = The quantity of heat added = 292.88 Joules

m = The mass of the material = 110.0 g

ΔT =  The temperature change = 10.0°C

c = The specific heat capacity of the material

We get;

c = ΔH/(m × ΔT)

Which gives;

c = 292.88 J/(110.0 g × 10.0°C) ≈ 0.266 J/(g·°C)

2. The given mass of aluminum, m = 550.0 g

The initial temperature of the aluminum, T₁ = 14.0°C

The final temperature of the aluminum, T₂ = 108.0°C

The specific heat of aluminum, c = 0.902 J/(g·°C)

We get;

Q = m × c × (T₂ - T₁)

Q = 550.0 g × 0.902 J/(g·°C) × (108.0°C - 14.0°C) = 46,633.4 joules = 46.6334 kJ

The heat that must be supplied to 550.0 g of aluminum pan to raise the temperature of the pan from 14.0°C to 108.0°C, Q = 46.6334 kJ.

Answer:

negative charge

Explanation:

On an atomic scale, those are called "ions", and negatively charged ions are called anions.

Answer:

The material you're looking for is insulation.

Explanation:

It reduces and/or stops electricity waves, heat waves, and sound waves from going past.

We could choose to leave out the switch and simply join the wires together and the bulb will still light up.

A circuit is defined as pathway that has been designed for the flow of current. Now we know that a circuit must have a battery, connecting wires and the bulb itself.

However, we could choose to leave out the switch and simply join the wires together and the bulb will still light up.

Learn more about circuit: https://brainly.com/question/365923

Answer:

i would say the third one

Explanation:

may i be brainliest?

Answer:

ncandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.

Explanation:

Materials when heated emit a continuous spectrum with all wavelengths.

Hot gas gases emit a spectrum that depends on the transitions between atomic states, therefore it is a discrete spectrum.

When reviewing the answers, the correct one is:

ncandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.

Mercury is present in zinc plate which is used in simple cell

Answer:

Ține ogaru ca să o lingă pe măta în cur să nu mai facă alt prost ca tine

Answer:

The equivalent resistance of the three resistors is 18 ohms.

Explanation:

The value of three resistors are 6 ohms.

We need to find the equivalent resistance of the resistors. In series combination, the equivalent resistance is given by :

R = R₁ + R₂ + R₃ +.....

Put all the values,

R = 6+6+6

R = 18 ohms

Hence, the equivalent resistance of the three resistors is 18 ohms.