Answer:
We know that,
Density= mass upon volume.
mass= 21.93g
Volume= 49.3 - 46.3
= 3 cm³
Density = 21.93÷ 3
= 7.31 g/cm³
Hope it helps :))
A piece of indium with a mass of 21.93 g is submerged in 46.3 cm³ of water in a graduated cylinder. The water level increases to 49.3 cm³. The correct value for the density of indium measured in g/cm3 from these data is 7.31 g/cm³.
What is density?The density of a material is defined as its mass per unit volume. Although the Roman letter D can also be used, the most common symbol for density becomes. Mathematically, density is calculated by dividing weight by volume.
Density is frequently loosely defined as weight per unit volume, which is technically wrong; this quantity is actually more accurately characterized as specific weight. One example is the oil and gas industry in the United States.
Density= mass/volume.
mass= 21.93g
Volume= 49.3 - 46.3
= 3 cm³
Density = 21.93÷ 3
= 7.31 g/cm³
Therefore, 7.31 g/cm³ is the density.
To learn more about density, here:
https://brainly.com/question/29775886
#SPJ6
2A → B + C The above reaction is run and it is found that a plot of the natural log of the concentration versus time is linear. This indicates that the reaction is ...
Answer:
zero order reaction
Explanation:
The seem to be a reaction is zero order as the data only fits to zero order integrated rate law.
Integrated rate law:
[A] = [A]_0 – kt
Here y = [ A] and slope is -k , so when we plot concentration of A with respect to t then we get the equation in the form of line
y = mx + c
So the answer Zero order in [A]
Consider a buffer solution that is 0.50 M in NH3 and 0.20 M in NH4Cl. For ammonia, pKb=4.75. Calculate the pH of 1.0 L of the solution upon addition of 30.0 mL of 1.0 M HCl to the original buffer solution.
Express your answer to two decimal places.
***will mark Brainliest for right answer ***
The pH of the solution is 9.56.
Given:
Mol of NH₃ = 0.50
Mol of [tex]NH_4^+[/tex] = 0.20 to start (NH₄Cl dissolves completely)
Molarity = 1.0 M
30.0 mL of 1.0 M HCl is 0.0300 mol of HCl.
This will react with the NH₃ to produced 0.030 mol of [tex]NH_4^+[/tex] .
Henderson-Hasselbach equation:This equation is used to calculate pH. It is an approximate equation that shows the relationship between the pH or pOH of a solution and the pKa or pKb and the ratio of the concentrations of the dissociated chemical species
pH = pKa + log(base/acid)
pKa = 14 - pKb
pKa= 14 - 4.75
pKa= 9.25
pH = 9.25 + log(0.47/0.23)
pH = 9.56
Thus, the pH of the solution is 9.56.
Find more information about pH here:
brainly.com/question/22390063
Fill in the blanks according to the chemical reaction below to
indicate how many molecules of each substance are present.
N2 + 3H2 + 2NH3
Substance
N2
H2
NH3
Molecules Present (Coefficient)
The molecules or coefficient of N2 would be 1, that of H2 would 3, and that of NH3 would be 2.
From the balanced equation of the reaction:
[tex]N_2 + 3H_2 ---> 2NH_3[/tex]
1 mole of N2 will react with 3 moles of H2 in order to produce 2 moles of NH3. In order words, the mole ratio of N2 to H2 to NH3 in the reaction will always be 1:3:2.
Thus, the coefficient of N2 in the equation will be 1, the coefficient of H2 will be 3, and the coefficient of NH3 will be 2.
More on balancing equations can be found here: https://brainly.com/question/7181548?referrer=searchResults
Answer: 3:2
this is the answer I came up with that was correct after I did the question in ck12
what happens when
limestone is heated
Answer:
When limestone is heated strongly, the calcium carbonate it contains absorbs heat (endothermic ) and decomposes to form calcium oxide. Calcium oxide (also known as quicklime) is a key ingredient in the making of cement and is also used to make certain types of plaster.
Explanation:
Limestone heated
When limestone is heated strongly, the calcium carbonate it contains absorbs heat (endothermic ) and decomposes to form calcium oxide. ... Calcium oxide (also known as quicklime) is a key ingredient in the making of cement and is also used to make certain types of plaster.
Burning Limestone
Burning limestone, which is calcium carbonate, gives you quick lime, calcium oxide. Mixed with water this produces slaked lime, calcium hydroxide. ... This is soft when first mixed, but with time absorbs carbon dioxide from the atmosphere and hardens as it reverts back to calcium limestone.
Limestone exposed to heat and pressure.
Marble is a metamorphic rock that forms when limestone is subjected to the heat and pressure of metamorphism. ... Under the conditions of metamorphism, the calcite in the limestone recrystallizes to form a rock that is a mass of interlocking calcite crystals.
15. What is the molar mass of H2CO3?
(atomic mass: C = 12.01, H = 1.01, 0 = 15.99)
Answer:
62.00
Explanation:
H2 means that there are two moles of hydrogen so multiply the atomic mass by two (1.01 × 2 = 2.02)
C only has one mole sp leave 12.01 alone
And multiply oxygen by 3 because there are three moles of oxygen (15.99 × 3 = 47.97)
Add them all together!
2.02 + 12.01 + 47.97 = 62.00 for molar mass
True or False: Tsunamis always look like a towering wall of water approaching the beach.
Answer:
false
Explanation:
Answer:
True
Explanation:
they can get up to several hundreds of feet.
which horizon has the least weathered rocks? How do you know?
Answer:
C: The C horizon is a subsurface horizon. It is the least weathered horizon. Also known as the saprolite, it is unconsolidated, loose parent material. The master horizons may be followed by a subscript to make further distinctions between differences within one master horizon.
Explanation:
can someone answer the 4 questions? (4 is optional) it would really help me out thanks
Answer:
1)Energy converter is the transformation of one form of energy into another form .It is more specifically that the term energy conversions refers to the process through which energy is changed into forms that are useful to humans .For 100 of years humans have used an array of devices and systems for this purpose.
2) The three energy converters that you or your family use regularly are
Electric Iron Electric BulbElectric generator3)The three kinds of power plants that produce electricity in Ontario are
Nuclear Power PlantsHydroelectric Power PlantsGeothermal Power Plants4)A power plant is an industrial facility that generates electricity from primary energy most of the power plants use one more generators that convert mechanical energy into electrical energy in order to supply power to the electrical grid for society's electrical needs.
may be this was ur answer for ur question u wanted
Calculate the number of atoms of iron produced from 100.0 g of Iron (iii) oxide.
Will give brainliest, thank you for the help!
Im not entirely sure how to do this would someone mind answering it for me?
What is the percent composition of aluminum in the ore bauxite (AI2O3)?
Answer:
Molar mass of Al2O3 = 101.961276 g/mol
This compound is also known as Aluminium Oxide.
Convert grams Al2O3 to moles or moles Al2O3 to grams
Molecular weight calculation:
26.981538*2 + 15.9994*3
Percent composition by element
Element Symbol Atomic Mass # of Atoms Mass Percent
Aluminium Al 26.981538 2 52.925%
Oxygen O 15.9994 3 47.075%
Explanation:
Percent composition by element
Element Symbol Mass Percent
Aluminium Al 52.925%
Oxygen O 47.075%
Which is NOT an assumption of matter made by the kinetic molecular theory of gases?
a. The kinetic energy of particles is determined by their mass and their velocity.
b. Gas particles are widely dispersed and therefore are not affected significantly by attractive or repulsive forces.
c. Gas particles are small and take up little volume relative to the volume of the space around them.
d. When particles collide, their total energy is decreased.
Answer:
There is strong attraction or repulsion between the gas particles.In other words,they strongly interact with each other" is NOT an assumption made by kinetic molecular theory.
The theory that attempts to elucidate the behaviour of gases is known as kinetic molecular theory.
The postulates of kinetic molecular theory of gases are given below,
\bigstarGases consist of large number of identical particles(atoms or moleculesthat are so small and so far apart
\bigstar There is no force of attraction between the particles of a gas at ordinary temperature and pressure
\bigstarParticles of a gas are always in constant and random motion
\bigstarParticles of a gas move in all possible directions in straight lines. During their random motion, they collide with each other and with the walls of the container
\bigstarCollisions of gas molecules are perfectly elastic. This means that total energy of molecules before and after the collision remains same
\bigstarThe average kinetic energy (energy due to motion) of the gas particles is proportional to the temperature measured in kelvin. As temperature increases, the particles move faster and have more energy
\bigstarAt any particular time, different particles in the gas have different speeds and hence different kinetic energies.
\therefore From the above data it is clear that "There is strong attraction or repulsion between the gas particles.In other words,they strongly interact with each other" is NOT an assumption made by kinetic molecular theory.
Explanation:
According to Kinetic theory of gases, the kinetic energy of particles are derived from the temperature and not by their mass and velocity. Hence, option a is not an assumption of kinetic theory of gases.
What is kinetic theory gases ?According to kinetic theory of gases, gases substances are made of tiny particles. These particles when taken in a container have negligible volume compared to the volume of the container.
The collision between the gaseous particles and and between the particles and the wall make the pressure within the container. The kinetic energy of the particles is directly proportional to the temperature of the gas.
According to the theory, the kinetic energy is not determined from the mass and velocity of the particles, but by the temperature of the system. Hence, option a is not an assumption of kinetic molecular theory of gases.
Find more on kinetic theory:
https://brainly.com/question/14349214
#SPJ3
Help please the second question. I really need help guys
Answer:
106g/mol
Explanation:
Mass of Na=2×23=46
Mass of C=12
Mass of O=3×16=48
Total mass of Na2CO3=106g/mol
What do you think the body does to try and maintain its balanced pH considering the wide range of acidic and basic substances in the body?
Who is responsible for the impacts of overfishing?
Answer:
Japan, China, the U.S., Indonesia, Chinese Taipei and South Korea have been named by Pew Charitable Trusts on a “shame list” of countries responsible for overfishing tuna in the Pacific. According to Pew, the “Pacific 6” are responsible for 80 percent — 111,482 metric tons in 2011 — of the annual catch of bigeye tuna.
Hope it will help you
Help please I will give you the brainliest
Answer:
Salmonella
Poultry
Explanation:
I'm a cook. :D
Answer:
just put random words thats what i always do i never got a grade lower than c
8. Write the notation of an atom 'X', if the mass number is A and the atomic number is Z.
Answer:
[tex]^A_ZX[/tex] is the notion of an atom 'X', if the mass number is A and the atomic number is Z
Explanation:
The symbol of the element is "X"
The notion comprises of symbol of element "X" in the center.
On the upper left side of the symbol mass number "A" is kept and on the lower left side of the symbol, atomic number "Z" is kept.
Thus, notion will be
[tex]^A_ZX[/tex]
According to the diagram below, which of the following factors keeps Earth in motion around the sun?
Planet
Gravity
Inertia
Sun
Actual
orbit
Answer:
gravity
Explanation:
PLEASE HELP I WILL MARK YOU BRAINLIEST How many moles of FeCl2 do you need to react 5 moles of Cl2?
Answer:
1. Ok, so you have a 1:1 ratio of FeCl2 to FeCl3, which is shown by the fact that if you react 2 moles of FeCl2 you get 2 moles of FeCl3. So therefore, if you react 4 moles of FeCl2, you'd form 4 moles of FeCl3.
2. You have a 1:2 ratio of Cl2 to FeCl2, for every 1 mole of Cl2, you need 2 moles of FeCl2, so therefore, for 7 moles of Cl2, you need 2x7moles = 14 moles
3. 1:1 ratio. So you start with 2.28moles.
4. 1:2 ratio of Cl2 to FeCl2, so therefore to get from FeCl2 to Cl2 you need to divide by 2. Therefore, you need 3.25moles / 2 = 1.625 moles
Explanation:
pls mark branliest
How can sand be classified as individual evidence?
Answer:
Individual Characteristics are properties of physical evidence that can be attributed to a common source with a high degree of certainty. Examples of individual evidence include anything that contains nuclear DNA, toolmarks, and fingerprints.
Explanation:
Is Octocrylene (C24H27NO2) Ionic or Covalent?
Answer:
covalent
Explanation:
covalent compounds contain non metals. All of the elements in Octocrylene are non metals
Is Octisalate (C15H22O33) ionic or covalent?
why is no one helping me this is some bs
A STACK OF BOOKS WEIGHED 5 KILOGRAMS. ONE BOOK, WHICH WEIGHED 1,000 GRAMS, WAS
REMOVED FROM THE STACK HOW MUCH DID THE REMAINING BOOKS WEIGH?
Answer:
the remaining books weigh 4 kilograms or 4000 grams
Give me lil reasoning so I know your not lying for points
:(
(I’ll mark you as brainlister )
Sorting and separating are ways to classify matter using _______ properties. Your answer
I need help on this :/
Answer:
Physical
Explanation:
Hope this helps :)
what do we call the lines around the nucleus of an atom?
Explanation:
As you know, electrons are always moving. They spin very quickly around the nucleus of an atom. As the electrons zip around, they can move in any direction, as long as they stay in their shell. Any direction you can imagine — upwards, downwards, or sidewards — electrons can do it. Electrons are constantly spinning in those atomic shells and those shells, or orbitals, are specific distances from the nucleus. If you are an electron in the first shell, you are always closer to the nucleus than the electrons in the second shell.
Answer:
Electrons
Explanation:
Electrons orbit around the nucleus.
chemical equation Water decomposes into hydrogen and oxygen.
Water is a chemical compound also known as H2O and is composed of two hydrogen atoms (H) and one oxygen atom (O).
2 H2O → 2 H2 + O.
please help! I have an exam tomorrow, How do valence electrons affect how elements behave?
Answer:
Hi, valence electrons are the number of electrons present in the outermost shells of atoms of elements, they affect how sharing or transfer of electrons takes place when the atoms go into any reaction.
they also determine the oxidation state of the atom.
for example, hydrogen has one electron in its outermost shell. therefore in any reactions it tends to loose that electron or gain one more to become stable.
the reason why elements go into reactions is to become stable (to have a complete duplet or octet structure).
As you know, each shells aside from the first has maximum of 8 electrons. so for a element like chlorine which have 7 electrons in the valence shell will gain one electrons in reactions to become stable(have a complete octet structure)
valence electrons also classifies elements( metal or non-metal)
if an element have 1, 2 or 3 valence electron(s), it is likely to be a metal
if an element have 4 or 5, it can be a non-metal or a metalliod (semiconductor)
if an element have 6 or 7, it is likely to be a non-metal
if an element have 8, it is a noble/inert gas
this also explains why noble gases do not react since they already have a duplet structure, they do not need to go into reaction.
good lucks on your exams.
Answer:
The number of electrons in an atom's outermost valence shell governs its chemical properties. ... This tendency is called the octet rule, because the atoms have eight valence electrons. METALS. The most reactive metallic elements are metals from Group 1 (e.g., Na or K ) or Group 2 (e.g., Mg or Ca )
hope this helps.
A 1.0L buffer solution contains 0.100 molHC2H3O2 and 0.100 molNaC2H3O2. The value of Ka for HC2H3O2 is 1.8×10−5. Calculate the pH of the solution upon the addition of 10.0 mL of 1.00 MHCl to the original buffer.
Express the your answer to two decimal places.
***will mark Brainliest for right answer ***