PLSS HELP ITS THE LAST QUESTION I NEED!!!!!!! ALOT OF POINTS!!!

Which of the following statements is true?


People in an experiment do not have the right to refuse participation.

Scientists must make moral decisions on controversial issues.

Honest mistakes do not need to be corrected because they are not made on purpose.

If you don't know a law exists, it's ok to not follow it.

The heat of reaction when a sodium chloride solution is formed using a 10.0 g sample of NaCl(s) and 50.0 ml of water in a coffee cup calorimeter. The equation is :

E. q = ((60.0 g)(4.18 J/g K)(T f - T i))/(10.0 g/(58.44 g/mol))

Given that :

The mass of the NaCl = 10 g

The volume of sample = 50 mL

The molar heat of the reaction for NaCl ( sodium chloride ) = + 3.9 kJ/mol

The equation for the heat is given as :

q = m c ΔT

Where,

q = heat energy

m = mass

c = specific heat capacity

ΔT = change in temperature

Therefore the equation is given as :

q = m c ΔT

q = ( 50 g + 10 g) (4.184 J/g °C) (T f - T i)

q / mol = q water / mol NaCl

q = ((60.0 g)(4.18 J/g K)(T f - T i)) / (10.0 g/(58.44 g/mol))

The given question is incomplete, the complete question is :

You want to determine the molar heat of solution of sodium chloride using a 10.0 g sample of NaCl(aq) and 50.0 mL of water in a coffee cup calorimeter. Which of the following equations would you use? Assume the specific heat of the solution is the same as the specific heat of water.

A. q = (50.0 g)(4.18 J/g K)(T i - T f)

B. q = ((10.0 g)(4.18 J/g K)(T f - T i))/(10.0 g/(58.44 g/mol))

C. q = (60.0 g)(4.18 J/g K)(T f - T i)

D. q = (60.0 g)(4.18 J/g K)(T i - T f)

E. q = ((60.0 g)(4.18 J/g K)(T f - T i))/(10.0 g/(58.44 g/mol))

To learn more about heat here

https://brainly.com/question/16267186

#SPJ4

The mass of carbon that can be obtained from 65.3 g of the compound is 19.83 grams of carbon,

First, you should calculate the % of carbon in calcium acetate

% of carbon - (12.01 x 4)/(40.08+12.01 x 4+ 1.008 x 6+16x 4)

% of carbon-48.04/158.168 x 100%

% of carbon 30.37% In 65.3 g of compound,

there are 65.3 x 30.37% -19.83 grams of carbon.

What do you mean by compound?

A object created by joining several different elements or parts. Particularly: a separate substance created by the chemical fusion of two or more substances in a certain weight-to-volume ratio. a fresh antibiotic substance.

Learn more about Compound:

brainly.com/question/29162155

#SPJ4

Answer:

1104 K

Explanation:

We can use Charles' Law: [tex]\frac{V_1}{T_1} = \frac{V_2}{T_2}[/tex]

Plugging in the numbers gives us the initial temperature to be 1104 K

The compound to have a dipole moment, the correct statement about the dipole moment is 4) The molecule has no dipole moment.

The molecule is  CF₄, carbon tetrafluoride. The bond between the C - F is the polar covalent bond because of the greater electronegativity difference between the C and the F atoms. Even though it has no dipole moment because of the geometry that is tetrahedral geometry. The all the C - F bonds are arrange in  such a manner that the dipole moment will cancel out each other.

Thus, the  CF₄ molecule has no dipole moment. The molecule is the non - polar molecule.

This question is in complete , the complete question is :

Would you expect the following compound to have a dipole moment? if the molecule has a dipole moment, specify its direction. select the single best answer.           CF₄

1) The dipole moment is oriented from the fluorine atom towards the carbon atom.

2)  The dipole moment is oriented from the carbon atom towards the fluorine atom.

3) The orientation cannot be determined.

4) The molecule has no dipole moment.

To learn more about dipole moment here

https://brainly.com/question/14701505

#SPJ4

The correct reading of the volume in the pictured burette is e) 39.95 mL. The picture is attached below.

The purpose of the burette reading is to show that how much the solution has been dispensed, not the how much the burette contains. As compared to the volumetric glassware, the zero scale on the burette is written on the top. The Measurement scale on the burette is at the 1.0 intervals.

The intervals can be calculated as :

Intervals = (larger value - small value) / 2

Intervals = 1

The reading will be 39.95 mL.

Thus, according to the picture of the burette, the reading of the burette is the 39.95 mL.

To learn more about burette here

https://brainly.com/question/28145960

#SPJ4

The one which correctly reflect the calculation required to find the work done is a) W = - P ΔV = 266 J

The initial volume = 5.42 L

The final volume = 2.75 L

The change in volume , ΔV = final volume - initial volume

                                              = 2.75 - 5.42

The change in volume , ΔV = - 2.67 L

The work done is expressed as :

Work done, W =  - P ΔV

where,

ΔV = - 2.67 L

P = 748 torr = 0.984 atm

W =  - P ΔV

W = - ( 0.98 × - 2.67 ) × 101.3 J  ( 1 atm ⋅L = 101.3 J )

W = 266 J

The work done is 266 J.

A gas is compressed from a volume of 5.42 l to a volume of 2.75 l by an external pressure of 748 torr. which of the following correctly reflect the calculations required to determine the work done on/by the system (the gas)? select all that apply.

a) W = - P ΔV = 266 J

b) W = + P ΔV = - 266 J

c) none of the above

d) both a and b

To learn more about work done here

https://brainly.com/question/14989524

#SPJ4

The statement is true that rf values should be kept in the range of 0.2 to 0.8

go through the given link below to know more about rf values:-

https://brainly.com/question/26639192

#SPJ4

An allylic lone pair is the appropriate positioning for the curved arrows to indicate resonance for the specified allylic carbocation.

The carbocation is indeed an organic molecule that develops when two valence electrons, which are typically shared by two atoms of carbon, are lost from such a carbonyl group that already possesses four bonds. As a result, a carbon atom with three rather than four bonds and a positive charge is created.

All carbon atoms in carbocations, also referred to as carbonium ions, are positively charged. A ion is indeed a positive charge, and the "carbo" part of the term refers to an atom of carbon.

To know more about carbocation visit:

https://brainly.com/question/19168427

#SPJ4

The temperature in Celsius and kelvin is 50°C and 323.15 K.

The three most used temperature scales for usage in business, science, and daily life are Kelvin, Celsius, and Fahrenheit.

A scale in Kelvin is absolute. There are no degree symbols after its values, which begin at absolute zero.

Both Celsius and Fahrenheit are relative scales. The degree symbol is used to indicate Fahrenheit and Celsius temperatures.

Given the temperature is 122°F

Temperature in Celsius is -

⇒ C = (F - 32)/1.80

⇒ C = (122 - 32) / 1.80

⇒ C = 90 / 1.80

⇒ C = 50°C

Temperature in Kelvin is -

K = 5/9(F - 32) + 273.15

⇒ K = 5/9 (122 - 32) + 273.15

⇒ K = 323.15 K

To learn more about temperature in Celsius and kelvin from given link

https://brainly.com/question/13165448

#SPJ1

B. Hydrogen bonding with polar molecules is the  inter molecular interactions will water participate commonly with polar molecules.

Polarity causes the water molecules to attract each other. Water is polar despite possessing a zero net charge because of the structure of its molecules. The molecule's hydrogen ends are positive, and its oxygen ends are negative. Water molecules are attracted to other polar molecules and to one another as a result.

The polarity of water enables hydrogen bonds to form whenever adjacent water molecules are drawn to each other by their opposing charges. Other polar molecules and ions, such as many biomolecules including sugars, nucleic acids, and certain amino acids, are also attracted to or attracted by water.

Learn more about polar molecule here:

brainly.com/question/15173422

#SPJ4

(Hint: Oxide is the result of combining Mn and O.) Mn (Mass of the element, in g) (assuming 100 g of compound) elements in moles The smallest moles or moles of an element Multiplier mathematical model O 1. 49.5 2. _50,5 3.

To learn more about manganese dioxide refer to:

https://brainly.com/question/24387586

#SPJ1

An energy conversion is the change of energy from one form to another. An energy transfer is the movement of energy from one object to another.

Energy is a property of matter that gives us the ability to move or do work. The process of converting energy from one form to another is called energy transformation or energy conversion.

Energy is transformed in someplace every minute of every day. Thermal, electrical, nuclear, electromagnetic, mechanical, chemical, and sound energy are just a few of the many distinct sources of energy.

Energy transfer is the act of moving energy from one location to another.

Learn more about energy at:

https://brainly.com/question/25959744

#SPJ1

When a gas is heated in a flexible container with constant pressure, the statement "The gas particles travel quicker" is accurate.

option (C)

The container's walls are struck more forcefully by the gas particles inside the container.

(a) Gas molecules lack a fixed form and a fixed volume. They grow till they fill their container. Gas molecules move readily both inside and outside of the container because they are fluid. Unless compressed, gas molecules are not very dense.

(b) Gas molecules mix and disperse as they diffuse and effuse (travel through small holes).

(c) The container's walls are struck more forcefully by the gas particles inside the container. The gas container's capacity expands as a result of the impact.

The gas container's capacity expands as a result of the impact. Gas molecule characteristics

To know more about flexible on

https://brainly.com/question/29820966

#SPJ4

The complete  question follows

x consists of a flexible container with eight particles of a gas as shown. what happens to the pressure of the system when x is converted to the representations in (a), (b), and (c)?

(a) pressure increased

(b) pressure decreased

(c) pressure is constant

Answer:

40,827.34 g

Explanation:

First find the volume of the room and then multiply it by the density of air at ordinary atmospheric pressure and 25 ∘C.

In this case, the room has a length of 14.5 ft, a width of 16.5 ft, and a height of 6.0 ft.

volume = 14.5 ft x 16.5 ft x 6.0 ft = 1209.25 ft^3

To convert ft^3 to L, we can use the conversion factor 1ft^3 = 28.316846592 L

1209.25 ft^3 = 1209.25 * 28.316846592 = 34,416.99 L

Calculate the mass of the air in the room by multiplying the volume of the room by the density of air:

mass = 34,416.99 L x 1.19 g/L = 40,827.34 g

So, the mass of the air in the room is 40,827.34 g

The structure C₄H₉Br that is 2-bromo-2-methylpropane , exhibits the ¹H NMR is as follows :

                        CH₃

                          |

              CH₃ - CH - CH₃

                         |

                        Br

In the 2-bromo-2-methylpropnae molecule, all the 9 protons has the same chemical environment and  there no splitting of the ¹H NMR resonance.  All the protons are chemically equivalent, and they will have the same resonance frequency in the NMR.

In the molecule , 9 protons of the 2-bromo-2-methylpropane, as all the hydrogen atoms are having the same chemical environment. In the  the Chemical shift (a) of the 1.80 ppm on the ¹H NMR spectrum for the 2-bromo-2-methylpropane is present.

To learn more about ¹H NMR here

https://brainly.com/question/26461487

#SPJ4

Raising the activation energy would decrease the rate of a chemical reaction.

The rate of a chemical reaction refers to the speed at which the reactants are converted into products. There are several factors that can affect the rate of a chemical reaction, including the concentration of reactants, temperature, and the presence of catalysts or inhibitors.

Adding more reactants would generally increase the rate of a chemical reaction, as there would be more particles present to collide and react. Stirring the reaction more vigorously would also increase the rate of the reaction, as it would increase the chances of successful collisions between reactant particles. Squeezing the reactants into a smaller volume would also increase the rate of the reaction, as it would increase the concentration of reactants and the chances of successful collisions.

On the other hand, increasing the temperature would generally increase the rate of a chemical reaction, as it would increase the kinetic energy of the reactant particles and increase the chances of successful collisions.

However, raising the activation energy would decrease the rate of a chemical reaction, as it would require more energy for the reactant particles to overcome the activation energy barrier and undergo a successful reaction. Activation energy is the energy required to start a chemical reaction.

Learn more about activation energy here:

https://brainly.com/question/1380484

#SPJ4

The opportunity cost for the new instruments for the music department is the 10% to upgrade the computer lab hardware

The revision of the budget is that the school board had to redistribute the budget allocation for upgrading the computer lab hardware from 5% to 10%. This means that the school board had to make a trade-off in terms of allocating more budget for upgrading the computer lab hardware and less for other areas such as new instruments for the music department or new sports equipment.

This trade-off is known as the opportunity cost, as the school board had to give up the potential benefits of allocating more budget to those areas in order to allocate more budget to upgrading the computer lab hardware.

Read more on opportunity cost here: https://brainly.com/question/481029

#SPJ1

The partial pressure of NH3(g) at equilibrium is 0.122 atm.

To calculate the partial pressure of NH3(g) at equilibrium, we can use the equilibrium constant expression (Kp = [H2S][NH3]/[NH4HS]). We know that Kp = 0.11 at 250°C and that the initial amount of NH4HS is 59.4 g. Since we also know the volume of the container is 5.0 L, we can use the ideal gas law (PV = nRT) to convert the number of moles of NH4HS to pressure.

First, we need to convert the mass of NH4HS to moles:

n = m/M = (59.4 g) / (51.11 g/mol) = 1.162 moles

Next, we can use the ideal gas law to find the pressure of NH4HS at the start of the reaction:

P = (nRT) / V = (1.162 mol)(0.0821 atm·L/mol·K)(523 K) / (5.0 L) = 9.98 atm

At equilibrium, the sum of the partial pressures of H2S and NH3 must equal 9.98 atm. Therefore, we can use the equilibrium constant expression to find the partial pressure of NH3:

Kp = [H2S][NH3]/[NH4HS] = 0.11

[NH4HS] = [H2S][NH3] / Kp = (P_H2S)(P_NH3) / 0.11

We know that P_NH4HS = 9.98 atm, so we can solve for P_NH3:

P_NH3 = [NH4HS] * Kp / [H2S] = 9.98 atm * 0.11 / P_H2S

Since we know that the sum of the partial pressures of H2S and NH3 must equal 9.98 atm, we can substitute that in for P_H2S:

P_NH3 = 9.98 atm * 0.11 / (9.98 atm - P_NH3)

Solving for P_NH3, we get P_NH3 = 0.122 atm

Read more about Chemical equilibrium:

https://brainly.com/question/16878977

#SPJ4

The balanced equation is :

2O₃(g)   ----->   3O₂(g)

The rate of the reaction with [O₂] :The correct option c) Rate = + (1/3) Δ[O₂] /Δt  

The balanced chemical equation is as follows :

2O₃(g)   ----->   3O₂(g)

The rate of the reaction is the speed of the reaction at which the product is formed from the reaction in the chemical reactions. The rate for the chemical reaction is expressed by the decrease in the concentration of the reactants or the increase in the concentration of the products:    

The rate of reaction with respect to the [O₂] is expressed as :

The rate =  + (1/3) Δ[O₂] /Δt  

To learn more about rate here

https://brainly.com/question/13898580

#SPJ4

The equation NaCl + AgNO3 => AgCl + NaNO3 incorporates the physical states for the synthesis reaction that took place in experiment 1. Factors are denoted by symbols in chemical equations.

When two or more chemical equations combine in a synthesis reaction, the result is A + B AB. This form makes it easy to spot synthesis reactions because there are more reactants than products. When two or more reactants react, a larger compound is produced depending on the direction of the reaction and the physical characteristics of the reactants. In 1615, chemist Jean Beguin of France formulated the first chemical equation. Chemical processes are present everywhere, beginning with food metabolism.

Learn more about chemical equations here

https://brainly.com/question/30087623

#SPJ4

Xe and Pb are atomic elements. I₂ and Br₂ are molecular elements. CaCl₂ and Al₂S₃ are ionic compounds and NO₂ and H₂S are molecular compounds.

Atomic elements are the elements which cannot be broken down further and combine together to form molecules. Among the substances given to us, Xenon (Xe) and Lead (Pb) can be categorised as atomic elements. Molecular elements are formed when the same elements combine with each other. I₂ and Br₂ are molecular elements.

Ionic compounds are consist of ions bound together. CaCl₂ and Al₂S₃ are ionic compounds. Molecular compounds are formed up of two or more elements and NO₂ and H₂S are molecular compounds.

To know more about ionic compounds here

https://brainly.com/question/9167977

#SPJ4

First ⬆️. Second ⬆️

I hope this helps ✌

Caroline knows the amount of a compound in moles.To find the number of molecules in the given sample of her compound, b. Avogadro's number also must be used in her calculation.

Avogadro's constant or “Avogadro's number” (symbol: L, NA) is the number of constituent particles (usually atoms or molecules) found in the amount of substance in one mole. Therefore, Avogadro's number is a proportional factor relating the molar mass of a substance to the mass of the sample. This value is equal to 6.022 140 857 (62) × 1023 mol−1.

Previous definitions of chemical quantities involved Avogadro's number, a historical term closely related to Avogadro's constant but defined differently: it was originally defined by Jean Baptiste Perrin as the number of atoms in one mole of hydrogen. It was later redefined as the number of atoms in 12 grams of the carbon-12 isotope and then generalized to relate the number of substances to their molecular weight.

Learn more about Avogadro's number at https://brainly.com/question/11907018.

#SPJ4

The linear order of amino acids (primary structure), with the varying properties of their side chains (R groups), determines what secondary and tertiary structures will form to produce a protein. The resulting unique three-dimensional shapes of proteins are key to their specific and diverse functions.

Amino acids are the building blocks of proteins, and the order of their assembly is known as the primary structure.

Each amino acid has a side chain, or R group, that is composed of different atoms, giving each amino acid a unique property that affects the structure and function of the proteins they create.

Depending on the primary structure and the chemical characteristics of the side chains, proteins can assume a variety of secondary and tertiary structures. It is these unique three-dimensional shapes that enable proteins to carry out their specific and varied functions.

To learn more about amino acids, click here:

https://brainly.com/question/14583479

#SPJ4

The compounds is the mass ratio of the chromium to the oxygen closest to 1.62 to 1.00 is CrO₃.

The Atomic mass of Cr = 52 g /mol

The Atomic mass of O  = 16 g/mol

The mass ratio of the chromium to the oxygen is given below as :

1) CrO₃ = 52 / 16 × 3 = 1.08

2) CrO₂ = 52 / 16 ×2 = 1.63

3) CrO = 52 / 16 = 3.25

4) Cr₂O = 52 × 2 / 16  = 6.5

5) Cr₂O₃ = 52 × 2 / 16 × 3 =  2.1

Thus the compound correct  mass ratio of chromium to oxygen closest to 1.62 to 1.00 is CrO₃.

To learn more about mass ratio here

https://brainly.com/question/14403176

#SPJ4

The empirical formula of a compound with 7.8% carbon and 92.2% chlorine is CCl₄ and that of a compound with 10.0% C, 0.80% H and 89.1% Cl is CHCl₃.

In order to determine the empirical formula of the compounds, we have to divide the percentage by mass of each of the elements by their relative atomic masses and then divide them through the lowest ratio.

Carbon = 7.8%

7.8/12 = 0.65

Chlorine = 92.2%

92.2 / 35.5 = 2.59

Dividing by the lowest ratio,

Carbon  = 0.65/0.65 = 1

Chlorine = 2.59/0.65 = 3.98 ≅ 4

So the empirical formula is CCl₄.

Hydrogen = 0.80%

0.80/1 = 0.80

Chlorine = 89.1%

89.1/35.5 = 2.50

Carbon = 10.0%

10/12 = 0.83

Dividing by the lowest ratio,

Hydrogen = 0.80/0.80 = 1

Carbon = 0.83/0.80 = 1.03  ≅ 1

Chlorine = 2.50/0.80 = 3.1  ≅ 3

So the empirical formula is CHCl₃

To know more about empirical formula here

https://brainly.com/question/17409468

#SPJ4

The mass of the gold with the density of 19.3 g/cm³ with dimensions of 10.0 in x 4.00 in x 3.00 in is 38,011.48 grams.

The mass of a substance can be calculated from the density by using the following expression;

Density = mass ÷ volume

According to this question, the dimensions of gold is given as 10.0 in x 4.00 in x 3.00 in. The density of gold is 19.3 g/cm³.

Volume of gold = 10 × 4 × 3 = 120in³

120in³ is equivalent to 1966.45cm³

19.3g/cm³ = mass ÷ 1966.45cm³

mass = 19.3 × 1966.45

mass = 38,011.48 grams.

Learn more about mass at: https://brainly.com/question/10397467

#SPJ1

Answer:

4.956 g/gallon * 0.387 = 1.91 g of sulfuric acid in 1 gallon of battery acid.

Explanation:

To calculate the number of grams of sulfuric acid in 1 gallon of battery acid, we can use the density of the solution and the percentage of sulfuric acid by mass.

First, we need to convert the density from g/ml to g/gallon. Since 1 gallon is equal to 3.785 L, we can multiply the density of 1.31 g/ml by 3.785 to get 4.956 g/gallon.

Next, we can use the percentage of sulfuric acid by mass to find the mass of sulfuric acid in the solution. To do this, we can multiply the mass of the solution by the percentage of sulfuric acid by mass, which is 0.387.

The Atomic Number, Mass Number, Number of protons, Number of neutrons, Number of electrons, Element, and Symbol is shown below:

The atomic number of an element is the number of protons present in the nucleus of the atom of the element.

The mass number is the sum of the protons and neutrons in the nucleus of the atom of the element.

Learn more about atomic numbers at: https://brainly.com/question/11353462

#SPJ1

Most probably the reaction 2 could be A: "( 2NO(g)+O2(g)→2NO2(g) )".

Reaction 2 is the second step of the overall reaction, which is the formation of NO2 from NO and O2. The overall reaction is (2O3(g)+2NO(g)→2NO2(g) + 2O2(g) ).

From the given options, the best match for reaction 2 is  (NO(g) + O2(g) → 2NO2(g) ) because it is a balanced equation that forms 2 moles of NO2 from 1 mole of O2 and 1 m0le of NO. This is consistent with the balanced equation of the overall reaction, which forms 2 moles of NO2.

Option A: 2NO(g) + O2(g) → 2NO2(g) forms 2 moles of NO2 but it consumes 2 moles of NO which is not consistent with the overall reaction.

Option B: 5NO(g) + O2(g) → 3NO2(g) forms 3 moles of NO2 but it consumes 5 moles of NO, again this is not consistent with the overall reaction.

Option C: NO(g)+O2(g)→2NO2(g),  it is a balanced equation that forms 2 moles of NO2 from 1 mole of O2 and 1 m0le of NO.

Therefore, based on the information provided, the correct option for reaction 2 is C: NO(g) + O2(g) → 2NO2(g)

"

Complete question

Reachtion 1  = (2O2(g)→3O2(g) ).

Reachtion 2  = ?

Overall recation = (2O3(g)+2NO(g)→2NO2(g) + 2O2(g) ).

the enthalpy of the overall reaction represented above can be determined by adding the enthalpies of reactions 1 and 2. which of the following could be reaction 2 ?

A: 2NO(g)+O2(g)→2NO2(g)

B: 5NO(g)+O2(g)→3NO2(g)

C:  NO(g)+O2(g)→2NO2(g)

D: None

"

You can learn more about enthalpy  at

https://brainly.com/question/14047927

#SPJ4