Pls someone help me with this question pls

Answer: The equilibrium constant for [tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex] is 1.35

Explanation:

Equilibrium constant is defined as the ratio of concentration of products to the concentration of reactants each raised to the power their stoichiometric ratios. It is expressed as [tex]K_c[/tex]  

For the given chemical reaction:

[tex]PX_3(g)+X_2(g)\rightarrow PX_5(g)[/tex]

The expression for [tex]K_c[/tex] is written as:

[tex]K_c=\frac{[PX_5]^1}{[PX_3]^1[X_2]^1}[/tex]

[tex]0.74=\frac{[PX_5]^1}{[PX_3]^1[X_2]^1}[/tex]

For the reverse chemical reaction:

[tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex]

The expression for [tex]K_c'[/tex] is written as:

[tex]K_c'=\frac{[PX_3]^1[X_2]^1}{[PX_5]^1}[/tex]

[tex]K_c'=\frac{1}{K_c}=\frac{1}{0.74}=1.35[/tex]

The equilibrium constant for [tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex] is 1.35

Answer:

Number of different animals

Explanation:

Number of different animals is not an abiotic factor that influences an ecosystem rather it is  a biotic factor.

Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.

Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.

Learn more about ecosystem,here:

https://brainly.com/question/12737609

#SPJ2

Answer: The change in time for the first quarter is  1.39 seconds.

The change in time for the second quarter is 0.78 seconds.

The change in time for the third quarter is 0.64 seconds.

The change in time for the fourth quarter is 0.54 seconds.  

Explanation: took info from my data and completed lab

Step 5: Measure the Speed of the Toy Car on the Higher Track

Calculate the change in time for each quarter of the track. Record the change in time in Table E of your Student Guide.

Also added the other calculations -

Calculate the average time the car took to reach each checkpoint. Record the average time in Table D of your Student Guide.

The average time to the first quarter checkpoint is 1.39 seconds.  

The average time to the second quarter checkpoint is 2.18 seconds.

The average time to the third quarter checkpoint is 2.82 seconds.

The average time to the finish line is 3.36 seconds.

Calculate the speed of the car at each checkpoint by dividing the distance between each checkpoint, in meters, by the change in time. Record your answers in Table E of your Student Guide.

The speed at the first quarter checkpoint is 1.09 m/s.  

The speed at the second quarter checkpoint is 1.95 m/s.

The speed at the third quarter checkpoint is 2.37 m/s.

The speed at the finish line is 2.80 m/s.

Please make me Brainly..:)

Answer:

[tex][Ag^+]=1.3x10^{-5}M[/tex]

Explanation:

Hello there!

In this case, according to the dissociation of silver chloride in aqueous solution, we can write:

[tex]AgCl(s)\rightarrow Ag^+(aq)+Cl^-(aq)[/tex]

Whereas the equilibrium expression is:

[tex]Ksp=[Ag^+][Cl^-][/tex]

And the solubility product constant is  1.7 x10⁻¹⁰; thus, by inserting x as the concentration of both silver and chloride ions as they are the same at equilibrium, we obtain:

[tex]1.7x10^{-10}=x^2\\\\x=\sqrt{1.7x10^{-10}} \\x=1.3x10^{-5}M[/tex]

Which is also equal to the concentration silver ions at equilibrium in a saturated solution because we considered the Ksp.

[tex][Ag^+]=1.3x10^{-5}M[/tex]

Best regards!

Answer:

34 mL

Explanation:

We'll begin by calculating the number of mole in 1.25 g of sodium carbonate, Na₂CO₃. This can be obtained as follow:

Mass of Na₂CO₃ = 1.25 g

Molar mass of Na₂CO₃ = (23×2) + 12 + (16×3)

= 46 + 12 + 48

= 106 g/mol

Mole of Na₂CO₃ =?

Mole = mass /molar mass

Mole of Na₂CO₃ = 1.25 / 106

Mole of Na₂CO₃ = 0.012 mole

Next, we shall determine the number of mole HCl needed to react with 0.012 mole of Na₂CO₃.

The equation for the reaction is given below:

Na₂CO₃ + 2HCl —> H₂CO₃ + 2NaCl

From the balanced equation above,

1 mole of Na₂CO₃ reacted with 2 moles of HCl.

Therefore, 0.012 mole of Na₂CO₃ will react with = 0.012 × 2 = 0.024 mole of HCl.

Next, we shall determine the volume of HCl required for the reaction. This is illustrated:

Mole of HCl = 0.024 mole

Molarity of HCl = 0.715 M

Volume of HCl =?

Molarity = mole /Volume

0.715 = 0.024 / volume of HCl

Cross multiply

0.715 × volume of HCl = 0.024

Divide both side by 0.715

Volume of HCl = 0.024 / 0.715

Volume of HCl = 0.034 L

Finally, we shall convert 0.034 L to mL

This can be obtained as follow:

1 L = 1000 mL

Therefore,

0.034 L = 0.034 L × 1000 mL / 1 L

0.034 L = 34 mL

Therefore, 34 mL of HCl is needed for the reaction.

The amount of HCl required for counterbalancing 1.25 g of Na2CO3(Sodium Carbonate) would be:

- [tex]34 ml[/tex]

Given that,

Mass of Na2CO3 [tex]= 1.25 g[/tex]

To find the Moles of Na2CO3, we will find the molar mass of Na2CO3,

Molar Mass of or Na2CO3 [tex]= 106 g/mol[/tex]

So,

Moles of Na2CO3 [tex]= mass /molar mass[/tex]

[tex]= 1.25/106[/tex]

[tex]= 0.012 mol[/tex]

To determine the quantity of HCl required to display the reaction with 0.012 mol of Na2CO3

[tex]Na_{2} CO_{2} + 2HCl[/tex] → [tex]H_{2}CO_{3} + 2NaCl[/tex]

While balancing the equation, we know that [tex]0.012[/tex] × [tex]2 = 0.024 mole of HCl[/tex] is necessary to process the reaction.

Now,

As we know,

HCl moles [tex]= 0.024[/tex]

Molarity of HCl [tex]= 0.715 M[/tex]

∵ Quantity of HCl required = Moles/Molarity

[tex]= 0.024 / 0.715[/tex]

[tex]= 0.034 l[/tex] [tex]or 34ml[/tex]

Thus, 34 ml is the correct answer.

Learn more about 'Molarity' here:

brainly.com/question/12127540

Answer:

0.3832

Explanation:

Givens

m = 437.2 grams

c = ?

delta t = 69.8 - 19.3

H = 8460 J

Formula

H = m*c*Δt

Solution

8460 = 437.2 * c * (69.8 - 19.3)

8460 = 437.2 * c * 50.5

8460 = 22078.6 * c

c = 8460 / 22078,6

c = .3832 J / (oC * gr)

Answer:

Explanation:

H

Mass percent can be calculated from the mass of solute in grams divided by the mass of solution multiplied by 100. The percent by mass of the solute in aqueous solution of 27.2 g  ethanol in 250 g of total solution 10.88 %.

Mass percentage is term used to represent the concentration of a solution. Mathematically mass percent of a component in a mixture is  the mass of the component divided by the total mass multiplied by 100.

A solution  is made of a solvent and solute. Thus, the total mass of the solution is the sum of mass of solute and mass of the solvent. Here, the solute is ethanol with a mass of 27.2 g. The total mass of solution is 250g.Hence, the mass percent of ethanol can be calculated as follows:

Mass percent of ethanol = mass of ethanol/total mass ×100

                                         =   (27.2/250)×100

                                         = 10.88 %.

Hence, the percent by mass of solute ethanol in the total solution is 10.88%.

To find more about mass percent, refer the link below:

https://brainly.com/question/5394922

#SPJ2

Answer:

8.26g

Explanation:

8.25g +1.50÷325k=8.26g

Answer:

The benefits of Fluoride are rebuild (remineralize) weakened tooth enamel.slow down the loss of minerals from tooth enamel.reverse early signs of tooth decay.prevent the growth of harmful oral bacteria

Answer:

Fluoride is often called nature's cavity fighter and for good reason. Fluoride, a naturally-occurring mineral, helps prevent cavities in children and adults by making the outer surface of your teeth (enamel) more resistant to the acid attacks that cause tooth decay.

Answer:

c. uracil

Explanation:

uracil is not found in DNA. the missing base would be thymine

Answer:

E  3.0 x 10² mL.

Explanation:

Hello there!

In this case, according to the formula for the calculation of the mass-volume percent:

[tex]\% m/V=\frac{m_{solute}}{V_{solution}}*100\%[/tex]

Whereas it is necessary to know the mass of the solute and the volume of the solution. Thus, given the mass of NaOH as the solute, the volume of the solution would be:

[tex]V_{solution}=\frac{m_{solute}}{\% m/V}*100\%[/tex]

Then, by plugging in we obtain:

[tex]V_{solution}=\frac{75g}{25\%}*100\%\\\\V_{solution}=3.0x10^2mL[/tex]

Thus, the answer is E  3.0 x 10² mL.

Best regards!

Answer:

As of right now (4-7-2021), the physical science requirement for the SLP certificate must be met by completing coursework in the areas of either chemistry or physics.

Answer:

True

Explanation:

I learned about it a few years ago

Answer:

11.1249387366083

Explanation:

you do -log([H+]

Answer:

When science educators teach nurses, their primary aim should be to help them to develop understanding of their world of nursing. From a study of registered nurses' conceptions of the physical science underlying their clinical practice, we assert that nurses' understanding of the physical sciences is inadequate in terms of the competencies required of them as nurses.

Explanation: Hopes this helps You A lot :-D

Answer:

3.7 x 10²¹ O₂ molecules

Explanation:

2KClO₃ => 2KCl + 3O₂

given 0.500g KClO₃ => 0.500g/122.55g/mol = 0.0041 mole KClO₃

0.0041 mole KClO₃ => 3/2(0.0041) mole O₂ = 0.0061 mole O₂

0.0061 mole O₂ = 0.0061 mole O₂ x 6.02 x 10²³ molecules O₂/mole O₂

= 3.7 x 10²¹ molecules O₂

Answer:

1.332 L

Explanation:

The reaction that takes place is:

First we calculate the number of NaOH moles, using the given volume and concentration:

Then we convert NaOH moles into H₂SO₄ moles, using the stoichiometric coefficients:

Finally we calculate the required volume of a 1.75 M solution of H₂SO₄, using the concentration and number of moles:

We can convert mL into L:

Answer:

+.0.94%

Explanation:

Relative and average atomic mass both describe properties of an element related to its different isotopes. Out of these two Relative atomic mas is more accurate. Thus the % relative error in his weight measurements is +.0.94%.

Mass defines the quantity of a substance. It is measured in gram or kilogram. Average mass is the mass of atoms of an element that are isotopes. It can be calculated by multiplying mass of a isotope to natural abundance of that isotope.

The relative mass is the mass that is with respect to mass of a matter that is considered as standard. In chemistry relative mass is equal to the mass of one-twelfth the mass of C-12 isotope .

% relative error=(Difference in weight÷ original weight)×100

Difference in weight= original weight -calculated weight

original weight=1.0755 g

calculated weight=1.0555 g

Difference in weight= 1.0755 g-1.0555 g=0.02g

% relative error=(0.02g÷ 1.0755 g)×100

                         =+.0.94%

Thus the % relative error in his weight measurements is +.0.94%.

To learn more about mass, here:

https://brainly.com/question/28704035

#SPJ2

Answer:

helium is the answer

Explanation:

helium is the smallest element in francium is the largest hope this helps

Answer:

The incorrect or the false options are -

(B) - If NH4NO3 is added, the pH becomes more basic.

(D) - If a small amount of HCl is added, the pH becomes slightly more basic.

 (E) - If NaOH is added, the OH- ions react with the [tex]NH_3[/tex].

Explanation:

The given solution the buffer basic .

Therefore , the options A ( If a small amount of NaOH is added, the pH becomes slightly more basic.) and C ( If HCl is added, the H+ ions react with the NH3.) All other B , D , E are false .

Answer:

[tex]2Na+Cl_2 \rightarrow 2NaCl[/tex]

Explanation:

When sodium combines with chlorine, it will form sodium chloride.

The equation is :

[tex]Na+Cl_2 \rightarrow NaCl[/tex]

The balanced equation is :

[tex]2Na+Cl_2 \rightarrow 2NaCl[/tex]

Hence, the above equation shows the balanced equation when sodium combines with chlorine to form sodium chloride.

Explanation:

by dissolving the mixture of lead sulphate and lead chloride in water we can separate the two. after dissolving the mixture on water lead sulphate can be obtained as the solid that 's left behind lead chloride can be recovered by evaporating.

Answer:

Cu⁺² is being reduced in that reaction.

Explanation:

When a substance is reduced, its oxidation number is reduced -changing to a lower value than original-.

Cu⁺² turned into Cu. Meaning that the oxidation number changed from +2 to 0.

Thus, Cu⁺² is being reduced in that reaction.

Answer:

8Al+3Fe3O4=4Al2O3+9Fe

Answer:

8Al + 3Fe3O4 → 4Al2O3 + 9Fe

Explanation:

Answer:

Looooolllllllllllll

Explanation:

What is the question bro