Answer:
The stomach is a muscular organ located on the left side of the upper abdomen. The stomach receives food from the esophagus. As food reaches the end of the esophagus, it enters the stomach through a muscular valve called the lower esophageal sphincter. The stomach secretes acid and enzymes that digest food.
Hope this helps:)
For tetracycline , describe an experiment that you could
use to determine if a bacterial sample taken from a person was
resistant to your antibiotic. Be sure to describe all steps of the
experiment including your independent, dependent and control
variables.
Answer:
penicillin was the first antibiotic discovered. Alexander Fleming discovered it in 1928. It was used widely during World War II. However, the sulfonamides were the first antibiotic class used clinically (in the 1930's). The discovery of antibiotics revolutionized medicine by making once-deadly infections treatable. There are now hundreds of antibiotics, classified into several categories. These antibiotic classes include:
Explanation:
sana makatulong!
Which types of energy would fall under the form of Kinetic Energy? Mark all that
apply.
Thermal Energy
Nuclear Energy
Electromagnetic Energy
Mechanical Energy
Chemical Energy
Why is a pasture-type system is
more labor intensive than
controlled systems?
A. There is greater maintenance of the
equipment.
B. There is greater need to handle diseases.
C. There is greater area to cover to observe and
manage the animals.
D. There is greater cost of feed per animal.
Answer:
The correct option is C.
There is greater area to cover to observe and
manage the animals.
Explanation:
This is because pasture type system refers to a large area of land where grasses are grown and animals are allow to graze the area of land to obtained nutrients. In this system there is large area of land where animals are well observed while feeding in order to prevent the risk of loss and attacks.
To assist in completing this question, you may reference the Animated Technique Video - Gel-Filtration Chromatography. Consider a mixture of four proteins with various molecular weights. A histone molecule weighs 15 kDa, a p53 molecule weighs 53 kDa, an actin molecule weighs 42 kDa, and an IgG molecule weighs 150 kDa. Arrange the molecules in order of their elution from a gel filtration column
Answer:
IgG molecule, p53 molecule, actin molecule, histone molecule
Explanation:
In a Gel-Filtration chromatography, the larger molecules elude faster from the gel than the small ones.
In a Gel-Filtration chromatography, there is a stationary phase and a mobile phase. The stationary phase has beads with pores. Small molecules enter the beads and descend through these beads' pores. On the other hand, large molecules do not enter the beads' pores, so they go down through the mobile phase faster than the small molecules. Since they do not have the obstacle of the pores, they descend between the beads more fluidly. As a result, the larger molecules elute first from the gel than the small molecules.
In a histology section of the digestive tract, you observe that the mucosa is made of simple columnar epithelium and the tissue has three layers of smooth muscles. This section represents ________. In a histology section of the digestive tract, you observe that the mucosa is made of simple columnar epithelium and the tissue has three layers of smooth muscles. This section represents ________. duodenum large intestine stomach esophagus
Answer:
The correct answer is - stomach.
Explanation:
The stomach is the only part of the digestive tract among the duodenum, large intestine, stomach, and esophagus that has three layers of smooth muscle.
The duodenum, large intestine, and esophagus simple columnar epithelium, and others have two -layers of smooth muscles and have simple columnar epithelium. This suggests that the mucosa is the section of the stomach in the digestive tract
How are humans impacting biodiversity in ecosystems around the world? Provide two examples to support your claim.
Answer:
as humans population continues to grow, we're cutting down more trees and occupying more lands to suffice the need of citizens, therefore, decreasing the forest biodiversity. Our plastic bags, as well as wastes, are polluting the ocean and eradicating essential species that are required to sustain a balance ecosystem, therefore, decreasing the biodiversity of the ocean that are required to maintain a balance environment.
Human activities have affected in Biodiversity in the ecosystems negatively and such activities include : i) Indiscriminate hunting/fishing ii) Improper waste disposal
Humans in search of food ( meat ) engage in excessive/indiscriminate hunting of endangered species thereby reducing the Biodiversity of animal species present in the wildlife also excessive fishing activities affects the biodiversity of certain species of fishes in our oceans negatively.
When wastes are not properly disposed they degrade the environment and decrease the biodiversity of the ecosystems in the process. the burning of industrial wastes leads to the exposure of certain species to the negative effects of dangerous gases and liquids thereby making the ecosystems to become unbalanced.
Hence we can conclude that some of the human activities impacting biodiversity in ecosystems around the world include : Indiscriminate hunting/fishing and Improper waste disposal
Learn more : https://brainly.com/question/17851096
How do the vacuoles and cytoplasm contribute to maintaining homeostasis in a cell?
Answer:
Vacuoles regulate the turgidity by regulating the amount of water inside the cell. cell has excessive water: vacuole absorbs the water and then diffuses it out of the cell. cell lacks water: water from the vacuole gets passed back into the cell thereby maintaining turgidity
How are gymnosperm seeds and angiosperm seeds different?
Answer:
angiosperms have seeds that are closed within an ovary, gymnosperms have no flowers or fruits, and have unenclosed seeds on the surface of scales or leaves
Identify the changes as either chemical (C) or physical (P). If chemical, what is the evidence?
Burning a piece of paper
Tearing a piece of paper
Digesting food
Heating a cup of water
Mixing baking soda and vinegar
Mixing calcium chloride and water
Answer:
1). P
2 C
3 P
4 P
5. P
Explanation:
THSE Answer are right a
In which stage of the cell cycle does the cell die
A) interphase
B) mitosis
C) apoptosis
where is the most energy stored in the ATP molecule stored
Which of the following are characteristics of Ascomycota? Check all that appply. PLEASE HELP!!
Answer:
2.spores produced in the ascus
4.important in the food industry
6.can cause disease in plants
Explanation:
Answer:
spores produced in the ascus
important in the food industry
important in the digestion of animals (leafcutter ants for one)
can cause disease in plants (dutch elm disease)
can cause disease in animals (candidiasis for one)
Explanation:
1. The expression of Hitchhikers thumb is due to recessive gene expression and you can express it. Use alphabet H. What is your genotype?
what two things can happen to the food made by plants?
Answer:
Food made by plants can get used by plants or by other animals as plants maybe eaten by other organisms that feed on plants by living on them, these organisms are called parasites. Or else the food can be used up by plants to carry out their metabolic activities ( activities at cellular level which keeps the plant alive ) like cellular respiration
Answer:
The food that is prepared by the plant is utilized for its metabolic processes, the excess food is stored in the form of starch, in the plants. ... The plants prepare starch by a process of photosynthesis with the sunlight along with "water and carbon dioxide
The food produced by the plants is in the form of sugar and the extra sugar produced is changed to starch and is stored in different parts of the plant such as in roots, stems, leaves, fruits and flowers.
Explanation:
hope this is what u want
hope it helps u
For each of the following minerals, say what properties of the material make it important in carrying out it's particular function.
a. tar roads
b. iron bulgar bars
c. plastic furniture
d. metal jewellery
e. clay for building
f. cotton clothing
Answer:
1. Tar Roads: The qualities of Tar that makes it ideal for road construction are:
The tar-like material that is used for road construction is a combination (emulsion) of water and liquid asphalt. It serves the purpose of permeating and closing up small lacerations in the existing pavement.
When the emulsion sticks to the "gravel" it reduces the potential for vehicles to skid on the road thus enhancing safety. The "gravel-like" emulsion is applied by rolling and sweeping.
Qualities of Tar are:
Adhesive: its the ability to stick to surfaces including materials such as gravel which it holds together makes it great for road construction;Waterproof: It is not water-soluble. Hence is not easily susceptible to the effects of running water. Resistant to High Temperature: The melting point of Tar is 54 degrees centigrade. The ground can heat up to 45 degrees celsius thus making Tar perfect for road construction as it can remain rigid even in the worst temperatures.2. Iron Burglar Bars
Steel bars are made from iron. The qualities of steel which make it perfect for securing places and things are:
Strength; This is the ability to withstand breakage and or destruction. Toughness: Steel is very tough and can not easily bend or break under static loads. Weldability: Most steel bars are actually welded together. Without this ability, steel probably would be useless as a material that can be used for protectionDurability: The only factor that degrades steel is rust. Rust happens when steel is exposed to oxygen which can be found in air and water.3.) Plastic Furniture
The primary qualities of plastic that make them suitable for furniture are:
Chemical stability: It does not rust or degrade when exposed to weather elements such as oxygen, water, etc. Good impact resistance: Depending on its thickness, plastic can bear a lot of weight and can take a lot of impact without deforming or breaking Good transparency and wear resistance: Plastic can be made transparent. This quality is essential for aesthetic purposes and hence can be used for various kinds of good-looking furniture. As furniture, its surface does not come off like hence it's durability.Low thermal conductivity: This means that it can bear heat without transmitting it easily. Ability to General formability, good coloring, low processing cost.4) Metal Jewellery
One of the best metals for jewelery is Tungsten. This is so because it is more durable and stronger than any other kind of material that can be used for jewelery purposes. It is about ten times harder than 18K gold and about four times harder than titanium. Other materials that can be used are:
titaniumstainless steel and cobalt5) Clay
In it's raw form, clay used for building might not be the best idea as it susceptible to water absorption and hence deformation which generally leads to a collapse of the structure. However, it becomes an excellent material of choice after it has been hardened into brick.
Brick is preferred in construction due to the following qualities:
hardnessHigh Compressive strength, Low Water AbsorptionFrost resistanceFireproofGreat Insulation6) Cotton is usually preferred as the material of choice for most kinds of clothing due to the following qualities:
Softness. The cotton plant is soft and fluffy and results in a fabric often retains that soft feel. Durability: Its molecular structure makes it able to last very long. Absorbency: it is able to absorb moisture/water. Hence making it more comfortable than synthetic materials High Dye Tolerance: Ability to hold dye well is an indespensable quality of a good fabric. You don't want to have a fabric whose colours are quick to fade. Breathability: This reduces is very important especially during summer or when the weather or environment is very hot.Cheers
The tar is roads that have quantities to make them deal with the construction. The liquid is a mix of asphalt and can be adhesive and waterproof.
The iron bars are used for securing the place and things. plastic furniture is used to make suitable furniture and is used for chemical stability etc. The metal jeweler is of titanium, cobalt and stainless steelLearn more about the following minerals.
brainly.com/question/26208691.
1. The diagram below represents part of Earth's latitude-longitude system. 2 points
What is the latitude and longitude of point L?*
45°
30°
15° 0°
15° 30° 45°
30°
N
20°
10°
0°
LI
10°
20°
30°
O (A) 5º E 30°N
(B) 5° N 30°E
(C) 5° W 30° S
O (D) 5° S 30°W
Answer:
I am not sure but the answer must be C
The Earth is the only planet known to support life. Which of the following is a major contributing factor to the Earth's ability to support
life?
A) The Earth has a magnetic field with north and south poles
B) The earth has an iron-rich core and is made mostly of rock
C) The Earth orbits the Sun and is orbited by the moon
D) The Earth is surrounded by a layer of air that includes oxygen
Answer:) The Earth has a magnetic field with north and south poles
Explanation:
a radioactive element has a half-life of 3,000 years. if a sample of this element begins with a mass of 60 grams, how long would you have to wait for the mass to decrease to 15 grams
Answer:
N = 60 g
Half life : N/2 = 3000
N/4 = 15 g
what three phases of the cell cycle are considered interphase
Answer:
The cell cycle has three phases that must occur before mitosis, or cell division, happens. These three phases are collectively known as interphase. They are G1, S, and G2. The G stands for gap and the S stands for synthesis.
Explanation:
The three phases of the cell cycle that are considered interphase include G1, S phase and G2.
The cell cycle can be divided into the interphase and mitotic (M) phases.The interphase can in turn be divided into a Growth G1 phase, synthesis (S) phase and Growth G2 phase.The synthesis of the genetic material (DNA) occurs in the S phase, whereas in G1 and G2 the cell synthesizes all materials required to enter into cell division.In conclusion, the three phases of the cell cycle that are considered interphase include G1, S phase and G2.
Learn more in:
https://brainly.com/question/1688608
how does shell color work to protect the egg from sunlight?
Answer:
Birds that live in cool climates lay darker eggs, as darker colors absorb more heat from the sunlight
Birds that live in hotter climates lay lighter eggs to prevent the egg from overheating.
The pigmentation acts to thermo-regulate the internal temperature of the egg, acting as a buffer between the embryo and the outside world. It does this by preventing overheating of the egg, through reflecting the sunlight off the pigmentation, rather than allowing it to be absorbed through the shell
_____ feedback is when the body reacts in the same direction as a stimulus.
Negative
Positive
Answer:
It's Positive.
Negative is when it reacts against the direction as a stimulus
What do producers dictate in
an ecosystem?
A. the size of the organisms
B. the age of the organisms
C. the amount of organisms
Answer:
C. The amount of organisms
Explanation:
Producers produce food from inorganic matter, this then makes food for other organisms in an ecosystem. The amount of producers dictates how much food is available, and by that how many organisms can be present.
A)x-linked
B)No answer text provided
C)recessive
D)dominant
Answer:
D)dominant
Explanation:
Comment on the folding of protein in vaccum
Answer:
Protein folding is a process by which a polypeptide chain folds to become a biologically active protein in its native 3D structure. ... The amino acids in the chain eventually interact with each other to form a well-defined, folded protein. The amino acid sequence of a protein determines its 3D structure.
llz follow me
The prolonged increase in heart and breathing rates during the snow skiing trip was probably a result of:______
a. activation of the sympathetic autonomic nervous system by the new experience.
b. activation of the parasympathetic autonomic nervous system by the new experience.
c. hypoxia caused by insufficient blood hemoglobin concentration to supply oxygen for exercise at the low oxygen pressure found at high altitudes.
d. depressed core body temperature (hypothermia) caused by exposure to cold temperatures at high altitudes.
Answer:
The correct answer is - option C.
Explanation:
Skiing generally happens on higher altitudes such as mountains. It is known that there is less oxygen is available at higher altitudes. There is low oxygen pressure at such height.
The prolonged increase in heart and breathing rate is due to less oxygen available for the cells. This condition is known as hypoxia caused by insufficient blood hemoglobin to supply oxygen for physical activities at higher altitudes.
When the Volume of Liquid was 60 mL what was its mass?
Answer:
60 grams or 0.060000 kg
Explanation:
what is Otis’s gene versions for body color
Answer:
giao
Explanation:
What is your opinion about minor children (under the age of 18) donating one of their kidneys for their brother or sister? Write at least three sentences stating your opinion and backing your answer.
Which feature is found in both cartilage and bone ?
Answer:
The features that are found in both cartilage and bone are, living cells embedded in a matrix
Explanation:
Answer:
it would be the nose
Explanation:
What happens after Telophase?
&
36/86
>
C
Answer:
The chromosomes begin to uncoil, which makes them diffuse and less compact. Along with telophase, the cell undergoes a process called cytokinesis that divides the cytoplasm of the parental cell into two daughter cells.