If 2.50 grams of ethane is allowed to react with 5.00 grams of oxygen how many grams of water would be expected?
Answer:
The mass of water produced is 4.29 g.
Explanation:
Given;
reacting mass of ethane, C₂H₆ = 2.5 g
reacting mass of oxygen, O₂ = 5.0 g
The balanced combustion reaction is given as follows;
2C₂H₆ + 7O₂ ----------------> 4CO₂ + 6H₂O
Based on the balanced equation above;
requires
7.0 moles of oxygen -----------------------> 2.0 moles of ethane
requires
5.0 g of oxygen --------------------------> x gram of ethane
x = (2 x 5) / 7
x = 1.43 g
Ethane is in excess of 1.07g (2.5 g - 1.43g)
Now, determine the mass of water produced by 1.43 g of ethane;
requires
2.0 moles of ethane -----------------------> 6.0 moles of water
requires
1.43 g of ethane --------------------------> y gram of water
y = (6 x 1.43) / 2
y = 4.29 g
Therefore, the mass of water produced is 4.29 g.
What is an Oxidizing Agent? ( answer in simple language)
Answer:
an agent that helps accept electrons on others like oxygen, halogens
Explanation:
a substance that tends to bring about oxidation by being reduced and gaining electrons.
Please mark me as brainliest
Question 1 (1 point)
A party balloon is filled up under the following conditions: 1.1 atm 65°C, 1,55 liters. Then, the balloon is taken to an outdoor wedding with
sightly different conditions: 1.2 atm and 92°C. What is the new size of the balloon?
Do not enter a unit, just the number
Round your answer to 2 sig figs.
Answer:
.5
Explanation:
Answer:
1.5
Explanation:
1.5
describe un modelo matemático para representar lo que sucede en cada una de las reacciones químicas (incluye toda la simbología que puedas) y clasifícalas según consideres de acuerdo con lo abordado en el tema.
1. El hidrógeno molecular reacciona con el oxígeno molecular y produce agua
2. El Óxido de calcio reacciona con el agua y produce hidróxido de calcio
3. El sulfuro de hierro (II) se produce cuando reacciona el azufre y el hierro en su forma atómica
4. El ácido sulfuroso se descompone por la acción de calor en dióxido de azufre gaseoso y agua
5. El carbonato de calcio se descompone por la acción de calor en oxido de calcio y dióxido de carbono gaseoso.
6. El magnesio reacciona con el ácido clorhídrico y produce dióxido de magnesio e hidrógeno gaseoso.
AYUDAAAAA
Responder:
2H2 + O2 → 2H2O
CaO + H2O → Ca (OH) 2
Fe + S → FeS
H2SO3 → SO2 + H2O
CaCO3 → CaO + CO2
Explicación:
2H2 + O2 → 2H2O
2 moléculas de hidrógeno gaseoso reaccionan con oxigente para producir 2 moléculas de agua
CaO + H2O → Ca (OH) 2
El óxido de calcio reacciona con el agua para producir hidróxido de calcio.
Fe + S → FeS
El hierro reacciona con el azufre para producir sulfuro de hierro.
H2SO3 → SO2 + H2O
Por descomposición, el ácido sulfuroso se descompone para producir dióxido de azufre y agua.
CaCO3 → CaO + CO2
El carbonato de calcio se descompone para producir óxido de calcio y dióxido de carbono.
1.
a) If 1.08 g of sodium sulfate reacts with an excess of phosphoric acid, how much sulfuric acid is produced? (0.74577)
b) If 0.726 g of sulfuric acid is produced in the laboratory experiment, what is the percent yield of sulfuric acid? (97.3190)
2.
If 3.2 moles of sodium sulfate is used in the reaction, how many formula units of phosphoric acid is needed to completely react?
(1.28427×1024
Answer:
1. a) 0.745 g of H₂SO₄
b) 97.4%
2. 1.28×10²⁴ formula units
Explanation:
First of all, we determine the equations:
3Na₂SO₄ + 2H₃PO₄ → 3H₂SO₄ + 2Na₃PO₄
We determine, the moles of sodium sulfate. (As the acid is in excess, we work with the salt)
1.08 g . 1mol/ 142.04g = 0.00760 moles.
Ratio is 3:3. So 3 moles of salt can produce 3 moles of sulfuric acid,
Then, 0.00760 moles will produce the same amount of acid.
We convert the moles to mass → 0.00760 mol . 98 g/mol = 0.745 g
Percent yield = (Produced yield /Theoretical yield) . 100
(0.726 g / 0.745 g) . 100 = 97.4 %
2. 3 moles of sodium sulfate need 3 moles of phosphoric acid to react
Then, 3.2 moles of salt will react to (3.2 . 2)/3 = 2.13 moles
Let's count the formula units:
2.13 mol . 6.02×10²³ formula units /mol = 1.28×10²⁴ formula units.
How many atoms can be found in 6.7 moles of Bromine (Br)
Question 7 options:
4.03 x 10^24
9.13 x 10^-24
8.99 x 10^22
3.31 x 10^24
Answer:
The first one is correct, 4.03 x 10^24.
is the maximum population that a given area can support.
Carrying capacity
Population growth
Limiting factor
Immigration rate
The carrying capacity is the maximum number of individuals of a species that an environment can support. Population size decreases above carrying capacity due to a range of factors depending on the species concerned, but can include insufficient space, food supply, or sunlight.
_N2+_F2→ _NF3
What goes inside the blanks
periodic table
fill in the box :)
Answer:
I took a screen shot of your image, and wrote on top of it!
Explanation:
Hope this helps! :)
Explain what a conjugate acid is and what a conjugate base is.
Answer:
A conjugate acid, within the Brønsted–Lowry acid–base theory, is a chemical compound formed when an acid donates a proton to a base—in other words, it is a base with a hydrogen ion added to it, as in the reverse reaction it loses a hydrogen ion
Explanation:
According to the A.P.E.X. glossary:
A conjugate acid is the form a base takes after it gains a hydrogen ion (or proton), and a conjugate base is the form an acid takes after it loses a hydrogen atom (or proton).
menciona tres ejemplos en los que un cálculo incorrecto en los en ingredientes indispensables para la elaboración de un producto traería consecuencias graves químicamente hablando
Explanation:
Cada producto o servicio, independientemente de su propósito, debe ser seguro de usar y desarrollado de acuerdo con los más altos estándares de calidad y seguridad.
Algunos ejemplos de cálculo incorrecto de ingredientes que tendrían graves consecuencias químicas podrían ser:
Medicamentos y vacunas: Este es quizás uno de los ejemplos que tendría las consecuencias más graves para las personas si hubiera un cálculo incorrecto de ingredientes, ya que la producción de medicamentos y vacunas es una industria que requiere la máxima calidad agregada debido a que se ocupa directamente de la salud y los errores de formulación pueden agravar la enfermedad y causar la muerte. Actualmente tenemos el ejemplo de la vacuna para el control de la pandemia, que antes de ser aprobada tuvo que someterse a una serie de investigaciones, pruebas en humanos y diferentes fases para demostrar su efectividad y no causar daño al organismo humano.
Cosméticos: Existen cosméticos de la industria de la belleza que tienen la función de prevenir el envejecimiento cutáneo, alisar el cabello, etc. Por tanto, un cálculo incorrecto de los ingredientes químicos también podría provocar daños irreversibles a la salud, como quemaduras en la piel, caída del cabello, alergias, cáncer, etc.
Alimentos: La industria alimentaria utiliza componentes químicos con el fin de conservar los productos y aumentar la vida útil, por lo que si se usan en cantidades mayores de las necesarias, dichos compuestos pueden causar enfermedades en las personas como intoxicación alimentaria, cáncer, gastritis, etc.
How many grams of molecular chlorine will be required to completely react with 0.0223 moles of sodium iodide according to the following reaction?
2Nal + Cl2 ---> 2NaCl + I2
A. 1.57 104 grams
B. 3.16 grams
C. 0.0112 grams
D. 0.791 grams
The amount of chlorine will be 0.791 gram required to completely react with 0.0223 moles of sodium iodide .
The given chemical reaction is :
2Nal + [tex]Cl_{2}[/tex] → 2NaCl + [tex]I_{2}[/tex]
It is given that:
Amount of sodium iodide = 0.0223 mol.
Atomic mass of chlorine = 35.45 g.
The amount of chlorine can be calculated as:
0.0223mol. NaI × (1mol. Cl₂/2mol. NaI) × (35.45g/1mol. Cl2)
=0.791 grams
Therefore, the correct answer will be option (D).
To know more about sodium chloride.
https://brainly.com/question/20273068
#SPJ1
All of the following are empirical formulas EXCEPT
a) Fe(OH)3
b) Na2SO4
c) N204
d) Sn3(PO4)2
Silver has a density of 10.5 grams/cm3. What would be the mass of a 5 cm3 piece of sliver
Answer:
52.5 g
Explanation:
Density= mass/volume
Rearranging the equation gives us m= d(V)
m= d(V)
m= (10.5 grams/cm^3)(5 cm^3)
m= 52.5 g
11.7 g of NaCl and 4.5 g of KBr were dissolved
in 47 g of water. What is the molality of NaCl
in the solution?
Answer:
4.26m
Explanation:
Molality , m, is an unit of concentration in chemistry defined as the ratio between moles of solute (In this case, NaCl) and kg of solvent (In this case, water).
To solve the question we need to find the moles of NaCl and the mass of water in kg:
Moles NaCl -Molar mass: 58.44g/mol-:
11.7g * (1mol / 58.44g) = 0.200 moles
Mass of Water in kg:
47g * (1kg / 1000g) = 0.047kg
Molality is:
0.200 moles / 0.047kg =
4.26m
Sound Wave, Ripple in water, Guitar String, TV Signal, Which one does not belong? Why?
Answer:
The TV signal.
Explanation: Hope this is right! :)
HELPP ILL GUVE YOU LOTS OF POINTS EVERYTHING U WANT I REALLY NEED HELP
Answer:
finally found
31th July 2000
The mass of the Atom is determined mainly by the
a) mass of the neutrons
b) mass of the neutrons and protons
c) mass of the electrons
d) mass of the electrons and neutrons
Answer:
B.mass of the neutrons and protons
Explanation:
hope it's help..
Why do our liver cells contain so many smooth ER?
Answer:
Liver cells contain lots of smooth endoplasmic reticulum because the liver plays a big role in detoxification. So, if you've had a few too many glasses of wine, it's the smooth endoplasmic reticulum in your liver that's helping move things along the next morning
Explanation:
What is the mass of 5.80 × 10²³ atoms of silver (Ag)?
A. 0.00893 g
B. 0.00963 g
C. 104 g
D. 112 g
Answer:
104 g
Explanation:
i just solved it
How many moles of NaCl can be made from 16 moles of Na?
A student measures the volume of a rock, and then repeats the measurement two times. For the three measurements to be very precise, what must be true about them?
A. The measurements must be very close to the true volume of the rock.
B. The measurements must be very close to one another.
C. At least one of the measurements must be equal to the true volume of the rock.
D. The three measurements must be reported in whole numbers, not decimals.
Answer:
i think b
Explanation:
A student measures the volume of a rock and then repeats the measurement two times. For the three measurements to be very precise the measurements must be very close to one another for rock. Option B is correct.
What is precise?While measuring something is the measured value is close to each other then the result measurement is said to be precise and the phenomena are called precision.
In the measurement of rock, the measured values must be close to each other and do not vary much then only the measurement of students can be precise.
Therefore, Option B is correct, the measurements must be very close to one another for the rock student measures the volume of a rock and then repeat the measurement two times. For the three measurements to be very precise.
Learn more about precise, here:
https://brainly.com/question/1311561
#SPJ2
How does the velocity of a falling object change over time?
Typically, your percent yield is ______ than 100% because ___________________________.
Reasons why percent yield is more than 100
Typically, percent yields are understandably less than 100% because of the reasons indicated earlier. However, percent yields greater than 100% are possible if the measured product of the reaction contains impurities that cause its mass to be greater than it actually would be if the product was pure.
figure it out
Answer:
Explanation:
A
heelp plzzzzzzzz anyyyyyone
Answer: C
Explanation:
Which part of the flower produces seeds? (992 points)
a
Ovule
b
Pistil
c
Stamen
d
Stigma
Answer:
The pistil, B.
Explanation:
The seeds are formed from the ovule which is contained in the ovary; all in the base, the pistil.
True or False. Physical changes result in the formation of a new substance.
True or False. A major clue to a chemical change is the formation of a new
substance.
Answer:
1. false
2. true
Explanation:
I hope this helps
hi help plz .........
Answer:The answer is C) The total mass of C and D only.
2. (10 Points) If something has a high heat capacity will it take a little energy or a
lot of energy to change its temperature? Defend your answer.
I uploaded the answer to a file hosting. Here's link:
tinyurl.com/wtjfavyw
Which statement is true? a. Energy is capability of doing work b. A cup of water has kinetic energy c. Kinetic energy is stored energy in substances. d. Potential energy is enery in motion. e. Heat and electricity are different forms of energy
Answer:
Option A an E.
Explanation:
Energy can be described as the capability to do work. It is what has to be transferred to an object in order to get this object to do work. Energy can be in various forms such as heat energy, kinetic, potential, electrical, chemical, nuclear etc.
It takes energy to do quite a number of things, from cooking food to driving and also in engaging in exercises.