Answers
Answer:
Explanation:
equilibrium constant
Kc = [ C ]² / [ A ] [ B ]
= .5² / .2 x 3
= .4167
Let moles of A to be added be n
concentration of A unreacted becomes .2 + n M
increase of product C by .2 M will require use of A and B be .1 M
So unreacted A = .2 + n - .1 = n + .1
Kc = [ C ]² / [ A ] [ B ]
.4167 = .7² / ( n + .1 ) ( 3 - .1 )
n + .1 = .4
n = . 3 moles .
So .3 moles of A to be added .
Related Questions
A naturally occurring oil co-distills with water to produce an oil/water distillate that is 20% oil by weight. If the molecular weight of the oil 100 g/mol, what was the partial pressure of the oil during distillation assuming atmospheric pressure is 760 mm Hg
Answers
Answer:
Explanation:
Partial pressure of oil = mole fraction of oil x total pressure
mole fraction of oil = mole of oil / mole of water + mole of oil
= mole of oil = mass of oil / molecular weight of oil
= 20 / 100 = .2
mole of water = 80 / 18
= 4.444
mole fraction of oil = .2 / .2 + 4.444
= .2 / 4.644
Partial pressure of oil = mole fraction of oil x total pressure
= (.2 / 4.644 ) x 760 mm
= 32.73 mm Hg .
What are the three types of combustion reactions
Answers
Answer:
Slow combustion
Spontaneous combustion
Explosive combustion
Explanation:
-Slow combustion reactions: Occurs at low temperatures. Cellular respiration is an example.
-Spontaneous combustion reactions: Occurs suddenly without an outside heat source. The heat source is the result of oxidation.
-Explosive combustion reactions: Involves an oxidizing agent.
hopefully this helped :3
Answer:
Three types are: Rapid Combustion, Complete Combustion, and Spontaneous Combustion.
Explanation:
Note: there are more types! This is just three random ones I picked to list. Hope this helps! :)
Vitamin c is known chemically by the name ascorbic acid determine the empirical formula of ascorbic acid if it is composed of 40.92% carbon, 4.58% hydrogen, and 54.50% oxygen.
Answers
Answer:
[tex]=C_3H_4O_3[/tex]
Explanation:
When percentage composition is given, and asked for the empirical formula, it is simplest to assume 100 g of material. Thus,
Mass C = 40.92 g. Moles C = 40.92 g x 1 mole/12 g = 3.41 moles C
Mass H = 4.58 g. Moles H = 4.58 g x 1 mole/1.0 g = 4.58 moles H
Mass O = 54.50 g. Moles O = 54.50 g x 1 mole/16 g = 3.41 moles O
Now, we want to get the moles into whole numbers, so we begin by dividing all by the smallest, i.e. divide all values by 3.41.
Moles C = 3.41/3.41 = 1
Moles H = 4.58/3.41 = 1.34
Moles O = 3.41/3.41 = 1
Now, in order to get 1.34 to be a whole number we multiply it (and all others) by 3
Moles C = 1x3 = 3
Moles H = 1.34x3 = 4
Moles O = 1x3 = 3
Empirical Formula [tex]=C_3H_4O_3[/tex]
What element forms an ion with an electronic configuration of 1s22s22p6 (or [Ne] ) and a −2 charge? Give the symbol for the element. g
Answers
Answer:
Mg²⁺
Explanation:
Electronic configuration = 1s22s22p6 (or [Ne] )
Charge = -2
This means the element has two extra electrons. So total electrons = 12.
The lement is Magnesium and the ion is Mg²⁺
Use your trendline equation to determine the gas pressure at 200 K and 400 K. (notice the temperature units) How many times greater is the pressure at 400 K in comparison to 200 K? Is this what you’d expect? Why?
Answers
Answer:
The pressure will be twice the initial pressure
Explanation:
Gay-Lussac's law states that the pressure of a gas is directely proportional to absolute temperature under constant volume. That is because vibrations of a gas increase when temperature increases, increasing the pressure of the gas.
That means if the temperature of a gas is doubled, the pressure will be twice the initial pressure.
For the reaction below, initially the partial pressure of all 3 gases is 1.0atm. . 2NH3(g)--> N2(g) + 3H2(g) K, 0.83 1. When the reaction reach equilibrium the partial pressure of N2 will be greater than 1atm The reaction would shift toward the reactants The reaction would shift toward the products 2. When the reaction reach equilibrium the partial pressure of NH3 will be greater than 1atm 3. When the reaction reach equilibrium the partial pressure of H2 will be greater than 1atm
Answers
Answer:
The reaction would shift toward the reactants
When the reaction reach equilibrium the partial pressure of NH3 will be greater than 1atm
Explanation:
For the reaction:
2NH₃(g) ⇄ N₂(g) + 3H₂(g)
Where K is defined as:
[tex]K = \frac{P_{N_{2}}*P_{H_2}^3}{P_{NH_3}^2} = 0.83[/tex]
As initial pressures of all 3 gases is 1.0atm, reaction quotient, Q, is:
[tex]Q = \frac{1atm*{1atm}^3}{1atm^2} = 1[/tex]
As Q > K, the reaction will produce more NH₃ until Q = K consuming N₂ and H₂.
Thus, there are true:
The reaction would shift toward the reactantsWhen the reaction reach equilibrium the partial pressure of NH3 will be greater than 1atm
How many oxygen molecules are needed to make 10 carbon dioxide molecules according to the following balanced chemical equation? 2 CO + O2 → 2 CO2
Answers
five oxygen molecules
step by step explanation.
according to the equation,one molecule of oxygen is enough to react with two carbon molecules thus 10 carbon molecules need 5oxygen molecules
1. Corrosion in metals is an example of what?
Answers
Answer:
In the most common use of the word, this means electrochemical oxidation of metal in reaction with an oxidant such as oxygen or sulfates. Rusting, the formation of iron oxides, is a well-known example of electrochemical corrosion.How many formula units make up 36.0 g of magnesium chloride (MgCl2)?
Express the number of formula units numerically.
Answers
Answer: There are [tex]2.29\times 10^{23}[/tex] formula units
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}=\frac{36.0g}{95g/mol}=0.38moles[/tex]
1 mole of [tex]MgCl_2[/tex] contains = [tex]6.023\times 10^{23}[/tex] formula units
Thus 0.38 moles of [tex]MgCl_2[/tex] contains = [tex]\frac{6.023\times 10^{23}}{1}\times 0.38=2.29\times 10^{23}[/tex] formula units
Thus there are [tex]2.29\times 10^{23}[/tex] formula units
9. Hydrogen peroxide decomposes to form water and oxygen gas according to the following equation:
2H2O2(aq) to 2H2O(l) + O2(g)
If 315 g of hydrogen peroxide, H2O2, decomposes and all the O2 gas is collected in a balloon at 0.792 atm and 23 degrees C, what is the volume of the O2 gas collected?
Answers
Answer:
[tex]V=142L[/tex]
Explanation:
Hello,
In this case, for the given reaction:
[tex]2H_2O_2(aq) \rightarrow 2H_2O(l) + O_2(g)[/tex]
Starting with 315 g of hydrogen peroxide, we can compute the yielded moles of oxygen by using the following stoichiometric factor whereas the hydrogen peroxide to oxygen mole ratio is 2:1:
[tex]n_{O_2}=315gH_2O_2*\frac{1molH_2O_2}{34gH_2O_2}*\frac{1molO_2}{2molH_2O_2} \\\\n_{O_2}=4.63molO_2[/tex]
Then, by using the ideal gas equation we can compute the resulting volume if the 4.63 moles of oxygen are collected at 0.792 atm and 23 °C as shown below:
[tex]PV=nRT\\\\V=\frac{nRT}{P}=\frac{4.63mol*0.082\frac{atm*L}{mol*K}*(23+273.15)K}{0.792 atm}\\ \\V=142L[/tex]
Best regards.
For the reaction: PCl5(g) ⇌ PCl3(g) + Cl2(g) at 600.0 K, the equilibrium constant is 11.5. Suppose that 1.500 g of PCl5 (MW=208.22 g/mol) is placed in an evacuated 500.0 mL bulb, which is then heated to 600.0 K. What is the total pressure (in atm) in the bulb at equilibrium?
Answers
Answer:
1.418688 atm
Explanation:
(a) Moles of PCl5 = mass / molar mass
=1.5 g / 208.22 g/mol
= 0.0072 moles
Also given,
T = 600 K
V = 0.500 L
Pressure of PCl5, P = nRT / V
= 0.0072 mol×0.0821 L-atm / (mol.K)×600 K / 0.500 L
= 0.709344 atm
(b) PCl5(g) ⇄ PCl3(g) + Cl2(g)
Initial 0.965 0 0
Change -x +x +x
Equilibrium (0.709344 -x) x x
K_p = 11.5 = x×x / (0.965 -x)
solving, we get x = 0.67027
So partial pressure of PCl5 at equilibrium = 0.709344 - 0.67027 = 0.039074 atm
(c) Partial pressure of PCl3 = Cl2 = 0.709344 atm
So total pressure = 0.709344+0.039074+ 0.67027= 1.418688 atm
Describe the formation of an aqueous libr solution when solid libr dissolves in water
Fill in the blanks with words given below.
K and I atoms
K and IF ions
dissociation
atoms
KI molecules
polar dilution
hydration
molecules ions
nonpolar
At the_______ surface of the solid _____________are pulled into solution by___________ the water molecules, where the______________ process surrounds separate with water molecules.
Answers
Answer and Explanation:
The water is a polar solvent which dissolves into the LiBr molecules and converts into [tex]Li^+[/tex] and [tex]Br^-[/tex] ions far from the solid also into the solution, when they are hydrated.
Now, the complete words are as given below:-
The [tex]K^+[/tex] and [tex]I^-[/tex] ions at the surface of the solid are pulled into the solution by the polar water molecules, where the hydration process surrounds separate ions with water molecules.
LiBr has been the ionic compound and has been dissociated in the water by the force of the polar water molecules. The water molecules that have been polar in nature exert the force onto the ionic compounds and help in the dissociation.
At the dissociation surface of the solid KI molecules, are pulled into the solution by the polar water molecules, where the hydration process surrounds ions and separates them with water molecules.
For more information about the hydration process, refer to the link:
https://brainly.com/question/939764
Classify each of the following word equations as a synthesis, decomposition, single displacement, or double displacement reaction.
Will give brainliest.
Answers
Answer:
12: This is decomposition because nitrogen triiodide is breaking apart.
13: This is double displacement because the elements in the compounds are "switching".
14: This is synthesis because the water and carbon dioxide are combining.
15: This is also synthesis because the hydrogen and oxygen are combining.
16: This is single displacement because the sodium is "switching" the element it's bonding with.
A cylindrical rod of length 1 m and radius 1 cm is submerged in water. The rod has a non-uniform mass distribution such that one half of the rod is much more massive than the other half. At which point in the rod can the buoyant force be considered to be acting?
A) at the rod's geometrical center
B) two of the given choices are correct
C) none of these
D) at the rod's center of mass
E) at the rod's center of gravity
Answers
Answer:
A) at the rod's geometrical center
Explanation:
Let us assume that the rod is replaced by water. And now this water volume is in translational and in rotational equilibrium.
Therefore, a net upward force must have been exerted by the surrounding liquid which acts at the center of mass of the water volume.
This force determines through the geometric center of the column of the cylindrical water
Moreover, the force is also independent of submerged body into it
Hence, the first option is correct
What information does the geologic time scale provide?
Answers
Answer:
The answer is D or information about when plants first appeared.
Explanation:
A gas particle of mass 5.31 × 10^-23 kg has a velocity of 1.00 102 m/s. What is the kinetic energy of the molecule
Answers
Answer:
Kinetic energy = 1/2mv²
where m is the mass
v = velocity
m = 5.31 × 10^-23 kg
v = 1.00 × 10^2 m/s
Kinetic energy = 1/2 × 5.31 × 10^-23 × ( 1.00 × 10^2)²
= 2.655 × 10^-19 Joules
Hope this helps
why is copper and iron are used for cooking utensils
Answers
Answer:
because according to the electron sea model they are good conductor of heat so,they can be used for cooking.
Electrons in atoms exist in particular energy level. A ___ must be emitted or absorbed to move between energy levels.
Answers
Answer:
Photon of light
Explanation:
According to Bohr's model of the atom, electrons in atoms are found in specific energy levels. These energy levels are called stationary states, an electrons does not radiate energy when it occupies any of these stationary states.
However, an electron may absorb energy and move from one energy level or stationary state to another. The energy difference between the two energy levels must correspond to the energy of the photon of light absorbed in order to make the transition possible.
Since electrons are generally unstable in excited states, the electron quickly jumps back to ground states and emits the excess energy absorbed. The frequency or wavelength of the emitted photon can now be measured and used to characterize the transition. This is the principle behind many spectrometric and spectrophotometric methods.
Each of these geometric shapes has a different number of sides. Arrange the shapes in order from the shape with the greatest number of sides to the shape with the fewest number of sides.
1. triangle
2. square
3. rectangle
4. octagon
5. hexagon
6. pentagon
Answers
2. Hexagon 6 sides
3. Pentagon 5 side
4. Rectangle 4 side
5. Square 4 sides
6. Triangle 3 side
I don’t know if that’s what u meant
Which element's neutral atoms will have the electron configuration
1s22s22p3s23p'?
a. boron
b. carbon
c. silicon
d. aluminum
Answers
Answer:
Alumunium
Explanation:
Alumunium = [Ne] 3s² 3p¹
Ne = [He]2s²2p⁶
He = 1s
Alumunium = 1s 2s²2p⁶3s² 3p¹
Answer:
D
Explanation:
Which pair of factors affects the force of gravity between objects
Answers
Answer:
The Answer is B. Mass and distance
Explanation:
Trust me lol
Answer:mass and distance
Explanation:
Given that a theoretical yield for isolating Calcium Carbonate in this experiment would be 100%. From that information and based on the results you obtained in this experiment, describe your success in the recovery of calcium carbonate and suggest two possible sources of error that would have caused you to not obtain 100% yield.
Answers
Answer:
It's well Explained below.
Explanation:
First of Excess product of CaCO_3 would be produced due to the fact that there would not be enough CaCl_2 to react with Na_2•CO_3. The main purpose of having stoichiometric quantities is for us to know the correct amount or near the correct amount of each reactant in order to create a product that will be close to the theoretical amount and thus have a higher percent yield.
Consider the following four solutions: a. NaCl in water b. Acetic acid in water c. Acetic acid in benzene d. Naphthalene in benzene Which of these solutions has the strongest solute-solvent interactions and the interaction is of which type?1. Acetic acid in water; hydrogen bonding2. Acetic acid in benzene; dipole-induced dipole interaction3. NaCl in water; ion-dipole interaction4. Naphthalene in benzene; London Dispersion Forces5. NaCl in water; hydrogen bonding
Answers
Answer:
NaCl in water; ion-dipole interaction
Explanation:
Sodium chloride is an ionic solid. Ionic solids dissolve in water due to ion dipole interaction. Ionic solids are composed of an ion pair which are strongly bound by electrostatic interaction between the oppositely charged ions in the solid state.
When an ionic substance is dissolved in water, the positive ion interacts with the negative end of the dipole in water while the negative ion interacts with the positive end of the dipole in water. Hence the ions are pulled apart by this ion-dipole interaction and the crystal structure of the solid collapses as the ionic solid dissolves in water.
Sodium chloride is an ionic solid. Interaction between the sodium ion and the negative end of the dipole in water as well as chloride ion and the positive end of the dipole in water leads to the dissolution of sodium chloride solid in water. This is the strongest solute-solvent interaction in the list.
When The strongest solute-solvent interactions and the interaction the correct option is A NaCl in water; ion-dipole interaction
What is Sodium chloride?
Sodium chloride is an ionic solid. Ionic solids liquefy in water due to ion-dipole interaction. Ionic solids are formed of an ion team that is strongly bound by electrostatic interaction between the differently delegated ions in the solid-state.
When an ionic substance is disbanded in water, the positive ion interacts with the negative end of the dipole in the water while the opposing ion interacts with the positive end of the dipole in water. Therefore the ions are dragged apart by this ion-dipole interaction and also when the crystal configuration of the solid collapses as the ionic solid dissolves in water.
Sodium chloride is an ionic solid. The interchange between the sodium ion and the negative future of the dipole in water as well as the chloride ion and the positive end of the dipole in water leads to the abolishment of sodium chloride solid in water. This is the strongest solute-solvent exchange on the list.
Find more information about Sodium chloride here:
https://brainly.com/question/26880978
A 25.0-mL sample of 0.150 M hydrochloric acid is titrated with a 0.150 M NaOH solution. The pH at the equivalence point is _____________.
Answers
Answer:
7 (neutral).
Explanation:
Hello,
In this case, for the chemical reaction:
[tex]HCl+NaOH\rightarrow NaCl+H_2O[/tex]
We can notice that since hydrochloric acid and sodium hydroxide are strong, they will fully dissociate during the titration, therefore, as they are in stoichiometric proportions in equal concentrations for the equivalence point, the pH will be 7 (neutral) since all the chloride ions are neutralized by the sodium ions.
Moreover, for the given acid solution, the required volume of sodium hydroxide will be:
[tex]V_{NaOH}=\frac{25.0mL*0.150M}{0.150M}=25.0mL[/tex]
To attain a complete titration until the equivalence point.
Best regards.
Rubidium has two naturally occurring isotopes. The average atomic mass of Rb is 85.4678 amu. If 72.15% of Rb is found as Rb-85 (84.9117 amu), what is the mass of the other isotope?
Answers
Answer:
x = 86.908 amu
Explanation:
Average mass of isotope = 85.4678 amu
Rb-85 = 84.9117 amu, Percentage = 72.15% = 0.7215
Other isotope = x, Percentage = 100 - 72.15 = 27.85% = 0.2785
Average mass = (Percentage * Mass of Rb-85) + (Percentage * Mass of Rb-87)
85.4678 = (0.7215 * 84.9117) + (0.2785 * x)
85.4678 = 61.2638 + 0.2785x
0.2785x = 24.204
x = 24.204 / 0.2785
x = 86.908 amu
86.908 amu
It is given that:
Average atomic mass of Rb = 85.4678 amu.
Also the mass of Rb-85 = 84.9117 amu and its Percentage = 72.15% = 0.7215
Let the mass of other isotope (Rb-87) = x
So, Percentage of other isotope (Rb-87) = 100 - 72.15 = 27.85% = 0.2785
Average mass = (Percentage * Mass of Rb-85) + (Percentage * Mass of Rb-87)
85.4678 = (0.7215 * 84.9117) + (0.2785 * x)
85.4678 = 61.2638 + 0.2785x
0.2785 x = 24.204
x = 24.204 / 0.2785
x = 86.908 amu
Learn more:
https://brainly.com/question/364529
1. Natural gas is used as a cooking fuel in many restaurants and homes. The primary chemical components of natural gas are hydrocarbons known as alkanes. Research and list the primary alkanes found in natural gas, and explain why these compounds excel as fuel sources.
Answers
Answer:
The main component of natural gas is methane (CH4) at 60 to 90% followed by various combination of ethane, propane, and butane whose percentage can vary from 0 to 20% each. For each unit mass of alkanes, the combustion energy (energy released when the fuel reacts with oxygen) released is very high about 13 to 15 kcal/g, which is higher than even those generated by petrol or diesel. So, for heating or other energy generation purpose for household purposes, this source of energy is used.
The equation for combustion of methane is shown below. Upon combustion, carbondioxide and water is produced with simultaneous generation of heat which is the source of energy used for consumption.
CH4 + 2O2 --> CO2+ 2H2O + heat [ For methane, the combustion energy is ~ 6kcal/g]
As the CH2 units are increased in the alkanes, the combustion energy increases, for e.g., ethane has combustion energy of 7 kcal/g and propane has about 12 kcal/g.
Explanation:
Question 14 of 25
2 Points
Which of the following is a cost of mining aluminum from new bauxite
deposits?
A. It helps preserve plants and animals in rain forests.
O O O
B. It requires a large amount of energy.
C. It takes less energy to transport this lightweight metal
D. It can be recycled over and over again.
Answers
Answer:
it can be recycled over and over again
Answer:
It requires a large amount of energy
Explanation:
How many moles of carbon atoms are there in 0.500 mol of C2H6?
Answers
The number of moles of carbon atoms in 0.500 mol of ethane (C₂H₆) is equal to one mole.
What is a mole?A mole can be defined as a scientific unit that is utilized to calculate the quantities such as atoms, molecules, ions, or other particular particles. The mass of one mole of a given chemical element is atomic mass and that of 1 mole of a chemical compound is molar mass.
The number of entities found in one mole is equal to 6.023 × 10 ²³ which is known as Avogadro’s constant.
Given, the number of moles of C₂H₆ = 0.500 mole
One molecule of ethane has carbons = 2
One mole of ethane has moles of carbons = 2 moles
0.500 mol of ethane has moles of carbon atoms = 0.500×2 = 1 mol
Therefore, one mole of carbon atoms is present in 0.500 mol of ethane C₂H₆.
Learn more about the mole, here:
brainly.com/question/26416088
#SPJ5
Using the volumes of sodium thiosulfate solution you just entered, the mass of bleach sample, and the average molarity of the sodium thiosulfate solution entered earlier, calculate the mass percent of NaClO for each bleach sample. Enter the calculated mass percent of NaClO in each of the 3 acceptable trials (For the first trial, the volume of sodium thiosulfate =10.1, mass of bleach is 0.496g, and average molarity of sodium thiosulfate=0.042M)
Answers
Answer:
3.18 (w/w) %
Explanation:
In the problem, you can find mass of NaClO knowing the reaction of NaClO with Na₂S₂O₃ is:
NaClO + 2Na₂S₂O₃ + H₂O → NaCl + Na₂S₄O₆ +2NaOH + NaCl
Where 1 mole of NaClO reacts with 2 moles of Na₂S₂O₃
Moles of thiosulfate in the titration are:
0.0101L ₓ (0.042mol / L) = 4.242x10⁻⁴ moles of Na₂S₂O₃
Thus, moles of NaClO in the initial solution are:
4.242x10⁻⁴ moles of Na₂S₂O₃ ₓ (1mol NaClO / 2 mol Na₂S₂O₃) = 2.121x10⁻⁴ moles NaClO
As molar mass of NaClO is 74.44g/mol, mass of 2.121x10⁻⁴ moles are:
2.121x10⁻⁴ moles ₓ (74.44g / mol) = 0.0158g of NaClO
As mass of bleach is 0.496g, mass percent is:
0.0158g NaClO / 0.496g bleach ₓ 100 =
3.18 (w/w) %The percent yield (isolation yield) of guaifenesin isolated from a 650 mg tablet containing 400 mg dose of drug, can be expressed as: Group of answer choices
Answers
Answer:
61.54%
Explanation:
Hello,
To calculate the percent yield of a product, we express it as ratio between the actual yield to the theoretical yield multiplied by 100.
Percent yield = (actual yield / theoretical yield) × 100
Actual yield = 400mg
Theoretical yield = 650mg
Percent yield = (400 / 650) × 100
Percent yield = 0.6154 × 100
Percent yield = 61.54%
Percent yield of guaifenesin in the drug is 61.54%