Answer:
D
Explanation:
Gamma, beta, alpha
If right, please mark me brainliest
The types of radiation from the most difficult to easiest to block is Gamma, beta, alpha.
What is radiation and explain its types?The energy from the source that travel with the speed of light to the space is known radiation. There are three types of radiation:
they are:
Alpha particlesBeta particlesGamma raysAlpha particles is a particle which consists of 2 proton and 2 neutron.
The alpha particles can easy to block.
eg: Helium nucleus
Beta particles is a ray or radiation that emits electron and positron during the process of beta decay.
Gamma rays is a radiation which is the penetration of electromagnetic radiations during radioactive decay. These radiations were very difficult to block.
So, Option D is the correct answer.
Learn more about radiations,
https://brainly.com/question/4072364
#SPJ2
The planets and the asteroid belt orbit the Sun in __________. Multiple Choice a spherical distribution, whereas the Oort cloud of comets orbits in a plane planes, whereas the Oort cloud of comets has a spherical distribution orbits nearly identical to the Oort cloud of comets planes tilted at an angle to the plane of the Oort cloud of comets a spherical distribution similar to that of the Oort cloud of comets
Answer:
planes, whereas the Oort cloud of comets has a spherical distribution.
Explanation:
A planet can be defined as a large celestial body having sufficient mass to allow for self-gravity and make it assume a nearly circular shape (hydrostatic equilibrium), revolves in an orbit around the Sun in the solar system and has a cleared neighborhood.
Basically, the planets are divided into two (2) main categories and these includes;
I. Outer planets: these planets are beyond the asteroid belt and comprises of jupiter, saturn, uranus and neptune, from left to right of the solar system.
II. Inner planets: these planets are the closest to the sun and comprises of mercury, venus, earth and mars.
These outer planets are made mostly of gases (hydrogen and helium) causing them to be less dense than the solid inner planets. These gases are generally known to be less dense in terms of physical properties.
Oort cloud is also referred to as Opik and it typically comprises of icy pieces of planetesimals (space debris) that spherically surrounds the sun at distances ranging from about 3000 to 100,000 AU.
Hence, the planets and the asteroid belt orbit the Sun in planes, whereas the Oort cloud of comets has a spherical distribution.
Which refers to the density of the medium’s particles at the compression of a sound wave?
Answer:
Explanation:
Amplitude. the density of a mediums particles at the compression of the wave. Rarefaction. the part of a wave where the particles of the medium are farther apart.
Answer: amplitude
Explanation:
а)
In figure below, assume that a 20-mm-diameter rivet joins the plates that are each 110 mm
wide. The allowable stresses are 120 MPa for bearing in the plate material and 60 MPa for
shearing of rivet. Find the followings. Express your final answer in N/mm².
110 mm
20-mm
P
(1) Determine the minimum thickness of each plate and largest average tensile stress in the
plates.
(6 marks)
Image of the plate is missing, so i have attached it.
Answer:
A) t = 7.854 mm
B) σ = 26.67 MPa
Explanation:
A) From shearing of rivet, formula for pressure is;
P = τ•A_rivets
Where;
τ is allowable stress
A_rivets is Area of rivet
We are given:
τ = 60 MPa
Diameter; d = 20 mm
A_rivets = πd²/4 = π × 20²/4 = 100π
Thus;
P = 60 × 100π
P = 6000π N
From bearing of plate material, we can calculate pressure as;
P = σ_b•A_b
We are given;
σ_b = 120 MPa
A_b is area of plate = 20t
Where t is the thickness
Thus;
6000π = 120 × 20t
t = 6000π/(120 × 20)
t = 7.854 mm
B) Largest average tensile stress is given by the formula;
σ = P/A
Where A = 110t - 20t
A = 90t
A = 90 × 7.854
Thus;
σ = 6000π/(90 × 7.854)
σ = 26.67 MPa
The instrument measuring the temperature change between inspired cool air and expired warm air is called?
Answer:
It's called a Spirometer
what determines the strength of a base?
The higher the dissociation constant the stronger the acid or base. Since electrolytes are created as ions are freed into solution there is a relationship between the strength of an acid, a base, and the electrolyte it produces. Acids and bases are measured using the pH scale.
This picture represents the electric field diagram between two particles with static charges. Do the two particles have the same charge? If the particles are free to move, what affect will the two particles have on each other? If a third particle was added to this field with a positive charge, what would it be attracted to? If an uncharged particle was placed between A and B, which way would it move?
Answers:
No, They will attract each other, B, and neither direction
Explanation:
Since the two already presented particles in the diagram represent both opposing charges due to the direction of the arrows (the arrows facing away from the particle shows a positive charge and the particles facing towards the particle show a negative charge), not only because of this but as the arrows between the particles show an attracting magnetic field, then it can be concluded that the particles will attract to each other and if another particle was introduced into the diagram of a positive charge, then it would attract to the negatively charged particle. If you have any questions or need further explanation, please comment below. E2021, have a great day.
Answer:
No, They Will Attract Each Other, B, and Neither Direction
Explanation: Im an edge student
A sample contains radioactive atoms of two types, A and B. Initially there are five times as many A atoms as there are B atoms. Two hours later, the numbers of the two atoms are equal. The half-life of A is 0.77 hours. What is the half-life of B in hours?
Answer:
Explanation:
Initially no of atoms of A = N₀(A)
Initially no of atoms of B = N₀(B)
5 X N₀(A) = N₀(B)
N = N₀ [tex]e^{-\lambda t}[/tex]
N is no of atoms after time t , λ is decay constant and t is time .
For A
N(A) = N(A)₀ [tex]e^{-\lambda_1 t}[/tex]
For B
N(B) = N(B)₀ [tex]e^{-\lambda_2 t}[/tex]
N(A) = N(B) , for t = 2 h
N(A)₀ [tex]e^{-\lambda_1 t}[/tex] = N(B)₀ [tex]e^{-\lambda_2 t}[/tex]
N(A)₀ [tex]e^{-\lambda_1 t}[/tex] = 5 x N₀(A) [tex]e^{-\lambda_2 t}[/tex]
[tex]e^{-\lambda_1 t}[/tex] = 5 [tex]e^{-\lambda_2 t}[/tex]
[tex]e^{\lambda_2 t}[/tex] = 5 [tex]e^{\lambda_1 t}[/tex]
half life = .693 / λ
For A
.77 = .693 / λ₁
λ₁ = .9 h⁻¹
[tex]e^{\lambda_2 t}[/tex] = 5 [tex]e^{\lambda_1 t}[/tex]
Putting t = 2 h , λ₁ = .9 h⁻¹
[tex]e^{\lambda_2\times 2}[/tex] = 5 [tex]e^{.9\times 2}[/tex]
[tex]e^{\lambda_2\times 2}[/tex] = 30.25
2 x λ₂ = 3.41
λ₂ = 1.7047
Half life of B = .693 / 1.7047
= .4065 hours .
= .41 hours .
A horizontal wire supports it weight in a 0.001T magnetic field, oriented orthogonally to the wire. This is due to current running from left to right in the wire. Calculate the current through this wire that will just support the weight of the wire (over the length of the wire). The length of the wire is 0.5 m, and the mass of the 0.5 m section is 50 g. [give your answer in units of Amps]
Answer:
Explanation:
Force on a current carrying wire in a magnetic field
= B i L where B is magnetic field , i is current and L is length of the wire .
Putting in the given values in the question
force on a current carrying wire in a magnetic field = .001 T x i x .5 m
5 x 10⁻⁴ i N .
weight of the wire = .050 kg x 9.8 m/s²
= .49 N .
For equilibrium
5 x 10⁻⁴ i = .49
i = 980 A .
What is the frequency of microwaves of wavelength 3 cm?
Give your answer to the
nearest GHz and without units.
Answer:
10 GHz
Explanation:
Applying,
v = λf.................... Equation 1
Where v = speed of microwave, λ = wavelength, f = frequency.
make f the subject of the equation
f = v/λ................ Equation 2
Note: Microwave is an electromagnetic wave, and all electromagnetic wave have the same speed, which is 3×10⁸ m/s
From the question,
Given: λ = 3 cm = 0.03 m
Constant; v = 3×10⁸ m/s
Substitute these values into equation 2
f = 3×10⁸/(0.03)
f = 10¹⁰ Hz
f = (10¹⁰/10⁹) GHz
f = 10 GHz
The amount of force needed to cause an object to accelerate depends upon
A.
the object's mass and the net force acting upon it.
B.
the object's volume and the net force acting on it.
C.
the object's mass and volume.
D.
the object's speed and direction.
someone pls help
Answer:
A
Explanation:
I have read the information
The hydrogen atom, changing from its first excited state to its lowest energy state, emits light with a wavelength of 122 nm. That is in the far ultraviolet. The sodium atom, which like hydrogen has one electron that gets excited outside a core of 10 other electrons, emits light at 589 nm making a similar transition from its first excited state to its lowest state. Which of these statements would be true about the sodium and hydrogen atoms and their spectra? THERE IS MORE THAN ONE CORRECT ANSWER
a. There would be other series of spectral lines ending on the first excited states of both atoms.
b. There would be a series of spectral lines in sodium with the longest wavelength one at 589 nm.
c. There would be a series of spectral lines in hydrogen with the longest wavelength one at 122 nm.
d. The hydrogen atom binds its electron more tightly than the sodium atom does, and would require more energy to remove its electron completely.
Answer:
c. There would be a series of spectral lines in hydrogen with the longest wavelength one at 122 nm.
d. The hydrogen atom binds its electron more tightly than the sodium atom does, and would require more energy to remove its electron completely.
Explanation:
The hydrogen atom which changes from the excited state to the lower ground state, it emits light having a wavelength of 122 m. And the sodium atom also gets excited and emits light at 589 nm when it moves from the 1st excited state to the lowest excited state.
Therefore, when the electrons jumps from the 1st excited state to the ground state, only one wavelength is observed as there is only one transition.
The hydrogen atom will bind the electron tightly but the sodium atom does not and would require more energy to remove the electron the electron completely as the binding energy is higher when the electron is closer to the nucleus.
A solid, uniform sphere of mass 2.0 kg and radius 1.8 m rolls from rest without slipping down an inclined plane of height 7.5 m. What is the angular velocity of the sphere at the bottom of the inclined plane
Answer:
[tex]w^2=5.5rads/s[/tex]
Explanation:
From the question we are told that:
Mass [tex]m=2.0kg[/tex]
Radius [tex]r=1.8m[/tex]
Height [tex]h=7.5m[/tex]
Generally the equation for Potential energy is mathematically given by
Potential energy=Kinetic energy+Rotational energy
[tex]mgh=\frac{1}{2}mv^2+\frac{1}{2}Iw^2[/tex]
Since there is no slipping
[tex]v=rw[/tex]
Therefore
[tex]mgh=\frac{1}{2}mr^2w^2+\frac{1}{2}Iw^2[/tex]
Where
[tex]I=\frac{1}{2}mr^2[/tex]
[tex]l=3.24m[/tex]
[tex]2*9.81*7.5=\frac{1}{2}(2)(1.8)^2w^2+\frac{1}{2}(3.24)w^2\\\\[/tex]
[tex]147.15=3.24w^2+1.62w^2[/tex]
[tex]w^2=\frac{147.15}{4.86}[/tex]
[tex]w^2=\sqrt{\frac{147.15}{4.86}}[/tex]
[tex]w^2=5.5rads/s[/tex]
Aluminum has an alpha value of 25 x 10^-6 1/degrees C. What is the change in
length of a 4850 cm wire at 2 degrees C when the temp increase to 55 degrees
C?
Answer:
0.25705 cm or 2.5705×10⁻³ m
Explanation:
Applying,
α = ΔL/(LΔT)................. Equation 1
Where α = coefficient of linear expansivity, ΔL = Increase in length, L = Original length, ΔT = Increase in temperature
make ΔL the subject of the equation
ΔL = α(LΔT)............... Equation 2
From the question,
Given: α = 10⁻⁶ C⁻¹, L = 4850 cm, ΔT = T₂-T₁ = (55-2) = 53 °C
Substitute these values into equation 2
ΔL = (10⁻⁶)(4850)(53)
ΔL = 0.25705 cm or 2.5705×10⁻³ m
Explain the mode of operation of x-ray
Answer:
If x-rays get in touch with our body tissues, they create a picture of a metal film. The high energizing rays are unable to penetrate soft tissue, such as skin and organs and travel through the laser. The places where the x-rays pass soft tissues are Black areas of an X-ray.
Answer:
Explanation:
Mode of Operation: In the X-ray tube a Low voltage high p.d is applied between the hot cathode and the anode. Electrons are emitted from the cathode and are accelerated to an extremely high speed. ... They are produced by increasing the p.d. between the cathode and anode.
If a body of mass 2 kg is moving with a velocity of 30 m/s, then on doubling its velocity the momentum becomes______.
a-60kgm/s
b-120kgm/s
c-90kgm/s
D-30kgm/s
What does the potential energy diagram of a chemical reaction tell you?
O A. Whether atoms are being created or destroyed
O B. Whether the reaction is endothermic or exothermic
C. Whether there are more reactants or products
D. Whether the law of conservation of matter is being obeyed
Answer:
B
Explanation:
I'm learning about this now actually and it can be a little confusing but it would be endothermic or exothermic. if endothermic the products have less energy than the reactants and if exothermic products have more energy than reactants
What is the term for the force that holds protons and neutrons together in the nucleus of
an atom?
a electromagnetism
b. gravity
c. the strong force
d the weak force
An object has one force acting on it. It is a 33- Newton force pointing downward. To create a net force of zero on the object, which force must be applied to it?
As soon as I see "Which...", I know that the last part of the question is the list of answer choices, but you decided not to let us see them.
The answer is: A 33-Newton force pointing upward.
a particle covers 10m distance in 2sec. if final velocity is 8m/s, find initial velocity
Answer:
vi =2
Explanation:
Δx = 1/2 (vi + vf) t
10 = 1/2 ( vi + 8 ) 2
10 = vi + 8
10-8 = vi
vi = 2 m/s
vi= initial velocity
vf= final velocity
Δx= distance
t= time
DESCRIBE THE REQUIREMENTS OF AN INTERNET CONNECTION?
please tell me the answer
Answer: The basic requirements for connecting to the Internet are a computer device, a working Internet line, and the right modem for that Internet line. In addition, software programs such as Internet browsers, email clients, Usenet clients, and other special applications are needed in order to access the Internet.
Explanation: brainleist pls :)
Drag each label to the correct location on the image. Not all labels will be used, Classify the sides of the mountain range based on the direction of the prevailing winds leeward side windward side Jake-effect side
WILL MARK BRAINLIEST!
Answer:
The picture didn't go thruuuuuuu
Answer:
hi
Explanation:
hi
If the height is 10m, what is the potential energy? Asuming that the mass is 10
[tex]\huge{\textit{\sf{{\color{m}{Answer}}{\color{b}{࿐}}}}}[/tex]
we know,
[tex] \boxed{potential \: energy = mgh}[/tex]
So,
[tex]\longmapsto10 \times 9.8 \times 10[/tex]
[tex]\longmapsto980 \: joules[/tex]
The light which is produced in the core of the sun passes through layers of comparatively cold gas clouds on the surface of the sun. These clouds absorb some of the sun's light producing dark lines in the spectrum of the sun and sky. Two of the lines, called Fraunhofer C and I) lines after their discoverer, are found at about 656 nm and 587 nm, respectively. Looking at your atomic spectroscopy data, which elements that you examined would absorb at these wavelengths
Answer:
the two lines observed correspond to Hydrogen and Helium
Explanation:
One of the great principles of atomic physics is that the emission and absorption lines of atoms are the same, in addition, each different element has a series of characteristic lines with which we can identify it.
Bohr's atomic model allows to fully explain the spectrum of lines and absorption of Hydrogen, in this case the line
λ = 656 nm
corresponds to a hydrogen trasition of the Balmer series from state n = 3 to state n = 2
The other line identified λ = 587 nm does not correspond to any hydrogen line and neither to heavy element lines, so this line when it was discovered was assigned to a new element, which was called Helium. This line is explained this element was assigned an atomic number (charge) of +2 and a mass of + 4 u, specifically it is a transition from level n = 3 to level n = 2
therefore the two lines observed correspond to Hydrogen and Helium
a 4 kg block is moving at 12 m/s on a horizontal frictionless surface. a constant force is applied such that the block slows with an acceleration of 3 m/s^2. how much work must this force do to stop the block?
a. -576 J
b. -360 J
c. -288 J
d. 360 J
e. 576 J
walk me through this please. NO LINKS.
Answer:
Is there a picture?
Explanation:
A system is in liquid-vapor mixture of 0.5 kg of saturated water vapor and 0.5 kg
of saturated liquid. Calculate the quality.
Answer:
x = 0.5 = 50%
Explanation:
The quality of a water liquid-vapor mixture can be defined as the fraction of water vapor present in the water liquid-vapor mixture. Therefore, it can be calculated by the use of the following formula:
[tex]x = \frac{m_{vap}}{m}[/tex]
where,
x = quality = ?
m_vap = mass of saturated water vapor = 0.5 kg
m = total mass = mass of saturated vapor + mass of saturated liquid
m = 0.5 kg + 0.5 kg = 1 kg
Therefore,
[tex]x = \frac{0.5\ kg}{1\ kg}[/tex]
x = 0.5 = 50%
Un corredor hace los 400 metros lisos en 50 seg. Calcula la velocidad en la carrera.
Answer:
8 meters/second
Explanation:
Rate x Time = Distance
R x T = D
R x 50sec = 400meters
R x 50sec/50sec = 400meters/50sec
R = 8meters/sec
A uniform rod of length 80cm rotated in the xy plane about a frictionless pin passing through one end (as shown in figure). If the angular
velocity of the rod is 4rad/s, find the linear velocity (in m/s) of its mid-point C
Rod
Pin
С
Select one:
O a. 0.5
O b. 1.6
O c. 1.3
O d. 0.8
Answer:
Linear velocity (in m/s) = 1.6 m/s
Explanation:
Given:
Length of rotational plane = 80 cm
Angular velocity of the rod = 4rad/s
Find:
Linear velocity (in m/s)
Computation:
Radius from mid point C = Length of rotational plane / 2
Radius from mid point C = 80 / 2
Radius from mid point C = 40 cm
Radius from mid point C = 0.4 m
Linear velocity (in m/s) = Angular velocity of the rod x Radius from mid point C
Linear velocity (in m/s) = 0.4 x 4
Linear velocity (in m/s) = 1.6 m/s
If you cut a permanent magnet into four pieces,
you will have what?
A) four temporary magnets
B) four smaller permanent magnets
C) two north poles and two south poles
D)four objects that are no longer magnets
you would have C) two north poles and two south poles
the statement that current is equal to the voltage difference divided by the resistance is known as what
Answer:it is known as (Ohm's law)
Explanation:
What are 3 facts you learned about the periodic table:
Answer: the rarest element is Francium. J is not on the periodic table. also Dmitri Mendeleev proposed the periodic table.
Explanation: Kinda looked the last one up.