Please type in the answer as Empirical (E) or Theoretical (T)
1. According to worldometers.info on June 24, 2020 at 3:40 pm Vegas Time, COVID-19 has already taken 124,200 lives
2. CDC anticipates a 2nd wave of COVID cases during the flue season.
3. Older adults and people who have severe underlying medical conditions like heart or lung disease or diabetes seem to be at higher risk for developing serious complications from COVID-19 illness
4. ASU predicts lower enrollment in the upcoming semester

Answer: 30 square units

Step-by-step explanation: In quadrilateral EFGH, sides FG ― and EH ― are parallel because they have the same slope. Sides EF ― and GH ― are parallel because they have the same slope. The area of quadrilateral EFGH is closest to 30 square units.

The expression given can be expressed in it's splest term as 5 : 3

Given the expression :

To simplify to it's lowest term , divide both values by 44

Hence, we have :

At this point, none of the values can be divide further by a common factor.

Hence, the expression would be 5:3

Learn more on ratios :https://brainly.com/question/2328454

#SPJ1

A bag contains 24 green marbles, 22 blue marbles, 14 yellow marbles, and 12 red marbles. The probability of randomly picking a marble that is not blue is 25/36.

Given,

Total number of marbles = 24 green marbles + 22 blue marbles + 14 yellow marbles + 12 red marbles = 72 marbles
We have to find the probability that we pick a marble that is not blue.

Let's calculate the probability of picking a blue marble:

P(blue) = Number of blue marbles/ Total number of marbles= 22/72 = 11/36

Now, probability of picking a marble that is not blue is given as:

P(not blue) = 1 - P(blue) = 1 - 11/36 = 25/36

Therefore, the probability of selecting a marble that is not blue is 25/36 or 0.69 (approximately). Hence, the correct answer is P(not blue) = 25/36.

To know more about probability, refer here:

https://brainly.com/question/13957582

#SPJ11

There are approximately 0.4594 acres in 2.0 hectares.

We need to use the conversion factor between hectares and acres.

Given:

[tex]1 hectare = 1[/tex] × [tex]10^4 m^2[/tex]

[tex]1 acre = 4.356[/tex] × [tex]10^4 ft[/tex]

To find the number of acres in 2.0 hectares, we can set up the following conversion:

[tex]2.0 hectares * (1[/tex] × [tex]10^4 m^2 / 1 hectare) * (1 acre / 4.356[/tex] × [tex]10^4 ft)[/tex]

Simplifying the units:

[tex]2.0 * (1[/tex] × [tex]10^4 m^2) * (1 acre / 4.356[/tex] ×[tex]10^4 ft)[/tex]

Now, we can perform the calculation:

[tex]2.0 * (1[/tex] × [tex]10^4) * (1 /[/tex][tex]4.356[/tex] ×[tex]10^4)[/tex]

= 2.0 * 1 / 4.356

= 0.4594

Therefore, there are approximately 0.4594 acres in 2.0 hectares.

Learn more about conversion factor here : brainly.com/question/28308386

#SPJ4

0.0560 has 3 significant figures. The number 0.0560 has three significant figures. Significant figures are the digits in a number that carry meaning in terms of precision and accuracy.

In the case of 0.0560, the non-zero digits "5" and "6" are significant. The zero between them is also significant because it is sandwiched between two significant digits. However, the trailing zero after the "6" is not significant because it merely serves as a placeholder to indicate the precision of the number.

To understand this, consider that if the number were written as 0.056, it would still have the same value but only two significant figures. The addition of the trailing zero in 0.0560 indicates that the number is known to a higher level of precision or accuracy.

Therefore, the number 0.0560 has three significant figures: "5," "6," and the zero between them. This implies that the measurement or value is known to three decimal places or significant digits.

It is important to consider significant figures when performing calculations or reporting measurements to ensure that the level of precision is maintained and communicated accurately.

Learn more about significant figures here :-

https://brainly.com/question/29153641

#SPJ11

To maximize the sugar you can gain from street vendors and satisfy your sweet tooth, you can use the following expression:

m[i] = max(m[i-1] + s[i], s[i])

Here, m[i] represents the maximum sugar you can consume so far on the i-th vendor, and s[i] denotes the sugar content of the i-th vendor's offering.

The expression utilizes dynamic programming to calculate the maximum sugar consumption at each step. The variable m[i] stores the maximum sugar you can have up to the i-th vendor.

The expression considers two options: either including the sugar content of the current vendor (s[i]) or starting a new consumption from the current vendor.

To calculate m[i], we compare the sum of the maximum sugar consumption until the previous vendor (m[i-1]) and the sugar content of the current vendor (s[i]) with just the sugar content of the current vendor (s[i]). Taking the maximum of these two options ensures that m[i] stores the highest sugar consumption achieved so far.

By iterating through all the vendors and applying this expression, you can determine the maximum sugar you can gain from the street vendors and satisfy your sweet tooth.

To know more about dynamic programming, refer here:

https://brainly.com/question/30885026#

#SPJ11

Step-by-step explanation:

since there is no graph it's a bit hard to answer this question, but I'll try. I can help solve the equation that represents the ratio of the two numbers:

(x + 1/2)/y = 1/3

This can be simplified to:

x + 1/2 = y/3

To graph this equation, you would need to plot points that satisfy the equation. One way to do this is to choose a value for y and solve for x. For example, if y = 6, then:

x + 1/2 = 6/3

x + 1/2 = 2

x = 2 - 1/2

x = 3/2

So one point on the graph would be (3/2, 6). You can choose different values for y and solve for x to get more points to plot on the graph. Once you have several points, you can connect them with a line to show the relationship between x and y.

(Like I said, it was a bit hard to answer this question, so I'm not 100℅ sure this is the correct answer, but if it is then I hoped it helped.)

1. Find the Maclaurin series approximation: Substitute [tex]x^2[/tex] for x in [tex]e^x[/tex] series expansion.

2. Graph the original function: Plot 10 ordered pairs of f(x) = [tex]e^(-x^2)[/tex] within the given range and connect them with a curve.

3. Graph the zeroth order Maclaurin approximation: Plot 10 ordered pairs of f(x) ≈ 1 within the same range and connect them.

4. Scale the graph appropriately and label the axes to present the functions clearly.

1. Maclaurin Series Approximation

The Maclaurin series approximation for the function f(x) = [tex]e^(-x^2)[/tex] can be found by substituting [tex]x^2[/tex] for x in the Maclaurin series expansion of the exponential function:

[tex]e^x = 1 + x + (x^2 / 2!) + (x^3 / 3!) + ...[/tex]

Substituting x^2 for x:

[tex]e^(-x^2) = 1 - x^2 + (x^4 / 2!) - (x^6 / 3!) + ...[/tex]

So, the Maclaurin series approximation for f(x) is:

f(x) ≈ [tex]1 - x^2 + (x^4 / 2!) - (x^6 / 3!) + ...[/tex]

2. Graphing the Original Function

To graph the original function f(x) =[tex]e^(-x^2)[/tex], follow these steps:

i. Take a piece of graph paper and draw the coordinate axes with labeled units.

ii. Determine the range of x-values you want to plot, which is -0.5 to 0.5 in this case.

iii. Calculate the corresponding y-values for at least 10 x-values within the specified range by evaluating f(x) =[tex]e^(-x^2)[/tex].

For example, let's choose five x-values within the range and calculate their corresponding y-values:

x = -0.5, y =[tex]e^(-(-0.5)^2) = e^(-0.25)[/tex]

x = -0.4, y = [tex]e^(-(-0.4)^2) = e^(-0.16)[/tex]

x = -0.3, y = [tex]e^(-(-0.3)^2) = e^(-0.09)[/tex]

x = -0.2, y = [tex]e^(-(-0.2)^2) = e^(-0.04)[/tex]

x = -0.1, y = [tex]e^(-(-0.1)^2) = e^(-0.01)[/tex]

Similarly, calculate the corresponding y-values for five more x-values within the range.

iv. Plot the ordered pairs (x, y) on the graph, using one color to represent the original function. Connect the ordered pairs with a smooth curve.

3. Graphing the Zeroth Order Maclaurin Approximation

To graph the zeroth order Maclaurin series approximation f(x) ≈ 1, follow these steps:

i. On the same graph with the same interval and scale as before, choose a different color of ink or pencil to distinguish the approximation from the original function.

ii. Plot the ordered pairs for the zeroth order approximation, which means y = 1 for all x-values within the specified range.

iii. Connect the ordered pairs with a smooth curve.

Remember to scale the graph to take up the majority of the page, label the axes, and any important points or features on the graph.

Learn more about Maclaurin series approximation visit

brainly.com/question/32769570

#SPJ11

In Problem 3, the Law of Sines can be used to find the heights of the triangle. The Law of Sines relates the lengths of the sides of a triangle to the sines of their opposite angles. The formula for the Law of Sines is as follows:

a/sin(A) = b/sin(B) = c/sin(C)

where a, b, and c are the side lengths of the triangle, and A, B, and C are the opposite angles.

To find the heights of the triangle using the Law of Sines, we need to know the lengths of at least one side and its opposite angle. In the given problem, the lengths of the sides a = 9 and b = 4 are provided, but the angles A, B, and C are not given. Without the measures of the angles, we cannot directly apply the Law of Sines to find the heights.

To find the heights, we would need additional information, such as the measures of the angles or the lengths of another side and its opposite angle. With that additional information, we could set up the appropriate ratios using the Law of Sines to solve for the heights of the triangle.

Learn more about Law of Sines here:

brainly.com/question/30401249

#SPJ11

Answer:

S₅₀ = 912.5

Step-by-step explanation:

the sum of n terms of an arithmetic sequence is

[tex]S_{n}[/tex] = [tex]\frac{n}{2}[/tex] [ 2a₁ + (n - 1)d ]

where a₁ is the first term and d the common difference

here a₁ = 6 and d = [tex]\frac{1}{2}[/tex] , then

S₅₀ = [tex]\frac{50}{2}[/tex] [ (2 × 6) + (49 × [tex]\frac{1}{2}[/tex]) ]

    = 25(12 + 24.5)

    = 25 × 36.5

    = 912.5

The absolute maximum and absolute minimum of the function () = 12 9 − 32 − 3 over the interval [0, 3], we need to evaluate the function at critical points and endpoints. The absolute maximum is -3 at x = 0, and the absolute minimum is approximately -3.73 at x ≈ 0.183.

Step 1: Find the critical points by setting the derivative equal to zero and solving for x.

() = 12 9 − 32 − 3

() = 27 − 96x² − 3x²

Setting the derivative equal to zero, we have:

27 − 96x² − 3x² = 0

-99x² + 27 = 0

x² = 27/99

x = ±√(27/99)

x ≈ ±0.183

Step 2: Evaluate the function at the critical points and endpoints.

() = 12 9 − 32 − 3

() = 12(0)² − 9(0) − 32(0) − 3 = -3 (endpoint)

() ≈ 12(0.183)² − 9(0.183) − 32(0.183) − 3 ≈ -3.73 (critical point)

Step 3: Compare the values to determine the absolute maximum and minimum.

The absolute maximum occurs at x = 0 with a value of -3.

The absolute minimum occurs at x ≈ 0.183 with a value of approximately -3.73.

Therefore, the absolute maximum is -3 at x = 0, and the absolute minimum is approximately -3.73 at x ≈ 0.183.

Learn more about interval here

https://brainly.com/question/30460486

#SPJ11

With offer 1, you would make $78,216, while with offer 2, you would make $70,354.04. Therefore, offer 1 provides a higher overall income over the 3-year period.

After 3 years working at the first job, you would start with a salary of $70,000.

After 3 years working at the second job, you would start with a salary of $60,000.

Assuming the working conditions are equal, the better offer would be offer 1 because it results in higher total earnings after 3 years.

With offer 1, you would make $78,216, while with offer 2, you would make $70,354.04. Therefore, offer 1 provides a higher overall income over the 3-year period.

Learn more about  higher overall

brainly.com/question/32099242

#SPJ11

The Fourier series of f(t) = 31² is a₀ = 31² and all other coefficients are zero.

For (i)[tex]2x^5[/tex] - 5x³ + 7: even, (ii) x³ + x⁴: odd.

The Fourier series of f(x) = x is Σ(bₙsin(nπx/L)), where b₁ = 4L/π.

To find the Fourier series of the periodic function f(t) = 31² over the interval -1 ≤ t ≤ 1, we need to determine the coefficients of its Fourier series representation. Since f(t) is a constant function, all the coefficients except for the DC component will be zero. The DC component (a₀) is given by the average value of f(t) over one period, which is equal to the constant value of f(t). In this case, a₀ = 31².

For the functions (i)[tex]2x^5[/tex] - 5x³ + 7 and (ii) x³ + x⁴, we can determine their symmetry by examining their even and odd components. A function is even if f(-x) = f(x) and odd if f(-x) = -f(x).

(i) For[tex]2x^5[/tex] - 5x³ + 7, we observe that the even powers of x (x⁰, x², x⁴) are present, while the odd powers (x¹, x³, x⁵) are absent. Thus, the function is even.

(ii) For x³ + x⁴, both even and odd powers of x are present. By testing f(-x), we find that f(-x) = -x³ + x⁴ = -(x³ - x⁴) = -f(x). Hence, the function is odd.

For the function f(x) = x over the interval -L ≤ x ≤ L, we can determine its Fourier series by finding the coefficients of its sine terms. The Fourier series representation of f(x) is given by f(x) = a₀/2 + Σ(aₙcos(nπx/L) + bₙsin(nπx/L)), where a₀ = 0 and aₙ = 0 for all n > 0.

Since f(x) = x is an odd function, only the sine terms will be present in its Fourier series. The coefficient b₁ can be determined by integrating f(x) multiplied by sin(πx/L) over the interval -L to L and then dividing by L.

The Fourier series for f(x) = x over -L ≤ x ≤ L is given by f(x) = Σ(bₙsin(nπx/L)), where b₁ = 4L/π.

Learn more about Fourier series

brainly.com/question/31046635

#SPJ11

Answer: SSS

Step-by-step explanation:

The lines on the triangles say that 2 of the sides are equal. Th triangles also share a 3rd side that is equal.

So, a side, a side and a side proves the triangles are congruent through, SSS

The sum of the first 5 term of the sequence 3,9,27 is 363.

Given the sequence in the question:

3, 9, 27

Since it is increasing geometrically, it is a geometric sequence.

Let the first term be:

a₁ = 3

Common ratio will be:

r = 9/3 = 3

Number of terms n = 5

The sum of a geometric sequence is expressed as:

[tex]S_n = a_1 * \frac{1 - r^n}{1 - r}[/tex]

Plug in the values:

[tex]S_n = a_1 * \frac{1 - r^n}{1 - r}\\\\S_n = 3 * \frac{1 - 3^5}{1 - 3}\\\\S_n = 3 * \frac{1 - 243}{1 - 3}\\\\S_n = 3 * \frac{-242}{-2}\\\\S_n = 3 * 121\\\\S_n = 363[/tex]

Therefore, the sum of the first 5th terms is 363.

Option B) 363 is the correct answer.

Learn more about geometric series here: brainly.com/question/19458543

#SPJ4

The truth value of the expression (~(0 ~ 1) v 1) 0?1 is false.

To calculate the truth value of the expression, let's break it down step by step:

So, the truth value of the expression (~(0 ~ 1) v 1) 0?1 is false.

Learn more about Logic

brainly.com/question/2141979

#SPJ11

Solutions for the given recurrence relations:

(a) Solutions for an ·an-1-12an-2 = 0, n ≥ 2, with ao = 1 and a₁ = 1.

(b) Solutions for a_n = 10a_(n-1) - 25a_(n-2) + 32, n ≥ 2, with ao = 3 and a₁ = 7.

(c) Solutions for a_n + a_(n-1) - 12a_(n-2) = 2^(n).

(d) Solutions for a_n = 4a_(n-1) - 4a_(n-2).

(e) Solutions for a_n = 2a_(n-1) - a_(n-2) + 2.

(f) Solutions for a_n - 2a_(n-1) - 3a_(n-2) = 3^(n).

In (a), the recurrence relation is an ·an-1-12an-2 = 0, and the initial conditions are ao = 1 and a₁ = 1. Solving this relation involves identifying the values of an that make the equation true.

In (b), the recurrence relation is a_n = 10a_(n-1) - 25a_(n-2) + 32, and the initial conditions are ao = 3 and a₁ = 7. Similar to (a), finding solutions involves identifying the values of a_n that satisfy the given relation.

In (c), the recurrence relation is a_n + a_(n-1) - 12a_(n-2) = 2^(n). Here, the task is to find all solutions of a_n that satisfy the relation for each value of n.

In (d), the recurrence relation is a_n = 4a_(n-1) - 4a_(n-2). Solving this relation entails determining the values of a_n that make the equation true.

In (e), the recurrence relation is a_n = 2a_(n-1) - a_(n-2) + 2. The goal is to find all solutions of a_n that satisfy the relation for each value of n.

In (f), the recurrence relation is a_n - 2a_(n-1) - 3a_(n-2) = 3^(n). Solving this relation involves finding all values of a_n that satisfy the equation.

Solving recurrence relations is an essential task in understanding the behavior and patterns within a sequence of numbers. It requires analyzing the relationship between terms and finding a general expression or formula that describes the sequence. By utilizing the given initial conditions, the solutions to the recurrence relations can be determined, providing insights into the values of the sequence at different positions.

Learn more about recurrence relations

brainly.com/question/32773332

#SPJ11

The expression sinθ secθ tanθ simplifies to [tex]tan^{2\theta[/tex], which represents the square of the tangent of angle θ.

To simplify the expression sinθ secθ tanθ, we can use trigonometric identities. Recall the following trigonometric identities:

secθ = 1/cosθ

tanθ = sinθ/cosθ

Substituting these identities into the expression, we have:

sinθ secθ tanθ = sinθ * (1/cosθ) * (sinθ/cosθ)

Now, let's simplify further:

sinθ * (1/cosθ) * (sinθ/cosθ) = (sinθ * sinθ) / (cosθ * cosθ)

Using the identity[tex]sin^{2\theta} + cos^{2\theta} = 1[/tex], we can rewrite the expression as:

(sinθ * sinθ) / (cosθ * cosθ) = [tex]\frac { sin^{2\theta} } { cos^{2\theta} }[/tex]

Finally, using the quotient identity for tangent tanθ = sinθ / cosθ, we can further simplify the expression:

[tex]\frac { sin^{2\theta} } { cos^{2\theta} }[/tex] = [tex](sin\theta / cos\theta)^2[/tex] = [tex]tan^{2\theta[/tex]

Therefore, the simplified expression is [tex]tan^{2\theta[/tex].

Learn more about expression here:

https://brainly.com/question/29809800

#SPJ11

The property (1)-¹(t₁, t₀) = $(t₀,t₁) holds true in matrix theory.

In matrix theory, the notation (1)-¹(t₁, t₀) represents the inverse of the matrix (1) with respect to the operation of matrix multiplication. The expression $(to,t₁) denotes the transpose of the matrix (to,t₁).

To understand the property, let's consider the matrix (1) as an identity matrix of appropriate dimension. The identity matrix is a square matrix with ones on the main diagonal and zeros elsewhere. When we take the inverse of the identity matrix, we obtain the same matrix. Therefore, (1)-¹(t₁, t₀) would be equal to (1)(t₁, t₀) = (t₁, t₀), which is the same as $(t₀,t₁).

This property can be understood intuitively by considering the effect of the inverse and transpose operations on the identity matrix. The inverse of the identity matrix simply results in the same matrix, and the transpose operation also leaves the identity matrix unchanged. Hence, the property (1)-¹(t₁, t₀) = $(t₀,t₁) holds true.

The property (1)-¹(t₁, t₀) = $(t₀,t₁) in matrix theory states that the inverse of the identity matrix, when transposed, is equal to the transpose of the identity matrix. This property can be derived by considering the behavior of the inverse and transpose operations on the identity matrix.

Learn more about matrix

brainly.com/question/29000721

#SPJ11

The measure of angle ADB is equal to the square root of ([tex]AB \times BA[/tex]).

In triangle ABC, let the angle bisectors drawn from vertices A and B intersect at point D. To find the measure of angle ADB, we can use the angle bisector theorem. According to this theorem, the angle bisector divides the opposite side in the ratio of the adjacent sides.

Let AD and BD intersect side BC at points E and F, respectively. Now, we have triangle ADE and triangle BDF.

Using the angle bisector theorem in triangle ADE, we can write:

AE/ED = AB/BD

Similarly, in triangle BDF, we have:

BF/FD = BA/AD

Since both angles ADB and ADF share the same side AD, we can combine the above equations to obtain:

(AE/ED) * (FD/BF) = (AB/BD) * (BA/AD)

By substituting the given angle bisector ratios and rearranging, we get:

(AD/BD) * (AD/BD) = (AB/BD) * (BA/AD)

AD^2 = AB * BA

Note: The solution provided assumes that points A, B, and C are non-collinear and that the triangle is non-degenerate.

For more such questions on angle

https://brainly.com/question/25770607

#SPJ8

(e) The overall solution is given by the equation x(t) =  C1t^3 + C2/t^3,, where C1 and C2 are arbitrary constants.

(a) The Wronskian of x(1) and x(2) is given by:

W = | x1(t) x2(t) |

| x1'(t) x2'(t) |

Let's evaluate the Wronskian of x(1) and x(2) using the given formula:

W = | t 2t^2 | - | 4t t^2 |

| 1 2t | | 2 2t |

Simplifying the determinant:

W = (t)(2t^2) - (4t)(1)

= 2t^3 - 4t

= 2t(t^2 - 2)

(b) For x(1) and x(2) to be linearly independent, the Wronskian W should be non-zero. Since W = 2t(t^2 - 2), the Wronskian is zero when t = 0, t = -√2, and t = √2. For all other values of t, the Wronskian is non-zero. Therefore, x(1) and x(2) are linearly independent in the intervals (-∞, -√2), (-√2, 0), (0, √2), and (√2, +∞).

(c) Since x(1) and x(2) are linearly dependent for the values t = 0, t = -√2, and t = √2, it implies that the coefficients in the system of homogeneous differential equations satisfied by x(1) and x(2) are not all zero. At least one of the coefficients must be non-zero.

(d) The system of equations x': = 9t^2x is already given.

(e) The general solution of the differential equation x' = 9t^2x can be found by solving the characteristic equation. The characteristic equation is r^2 = 9t^2, which has roots r = ±3t. Therefore, the general solution is:

x(t) = C1t^3 + C2/t^3,

where C1 and C2 are arbitrary constants.

Learn more about  linearly independent

https://brainly.com/question/30575734

#SPJ11

The first three nonzero terms in the Taylor polynomial approximation for the given initial value problem are: 1 - t^2/8 + t^4/128.

Given the initial value problem: x′′ + 8tx = 0; x(0) = 1, x′(0) = 0. To find the first three nonzero terms in the Taylor polynomial approximation, we follow these steps:

Step 1: Find x(t) and x′(t) using the integrating factor.

We start with the differential equation x′′ + 8tx = 0. Taking the integrating factor as I.F = e^∫8t dt = e^4t, we multiply it on both sides of the equation to get e^4tx′′ + 8te^4tx = 0. This simplifies to e^4tx′′ + d/dt(e^4tx') = 0.

Integrating both sides gives us ∫ e^4tx′′ dt + ∫ d/dt(e^4tx') dt = c1. Now, we have e^4tx' = c2. Differentiating both sides with respect to t, we get 4e^4tx' + e^4tx′′ = 0. Substituting the value of e^4tx′′ in the previous equation, we have -4e^4tx' + d/dt(e^4tx') = 0.

Simplifying further, we get -4x′ + x″ = 0, which leads to x(t) = c3e^(4t) + c4.

Step 2: Determine the values of c3 and c4 using the initial conditions.

Using the initial conditions x(0) = 1 and x′(0) = 0, we can substitute these values into the expression for x(t). This gives us c3 = 1 and c4 = -1/4.

Step 3: Write the Taylor polynomial approximation.

The Taylor approximation to three nonzero terms is x(t) = 1 - t^2/8 + t^4/128 + ...

Therefore, the starting value problem's Taylor polynomial approximation's first three nonzero terms are: 1 - t^2/8 + t^4/128.

Learn more about Taylor polynomial

https://brainly.com/question/30481013

#SPJ11

The average angular speed of the hand is ω = 1800 / t rad/s and 103140 / t degrees/s and the average linear speed of the hand is 5D / t m/s.  The answers to A and B are not the same as they refer to different quantities with different units and different values.

A) To find the average angular speed of the hand, we need to use the formula:

angular speed (ω) = (angular displacement (θ) /time taken(t))

= 5 × 360 / t

Here, t is the time for 5 rotations

So, average angular speed of the hand is ω = 1800 / trad/s

To convert this into degrees/s, we can use the conversion:

1 rad/s = 57.3 degrees/s

Therefore, ω in degrees/s = (ω in rad/s) × 57.3

= (1800 / t) × 57.3

= 103140 / t degrees/s

B) To find the average linear speed of the hand, we need to use the formula:linear speed (v) = distance (d) /time taken(t)

Here, the distance of the hand is the length of the arm.

Distance from shoulder to middle of hand = D

Similarly, the time taken to complete 5 rotations is t

Thus, the total distance covered by the hand in 5 rotations is D × 5

Therefore, average linear speed of the hand = (D × 5) / t

= 5D / t

= 5 × distance of hand / time for 5 rotations

C) No, the answers to A and B are not the same. This is because angular speed and linear speed are different quantities. Angular speed refers to the rate of change of angular displacement with respect to time whereas linear speed refers to the rate of change of linear displacement with respect to time. Therefore, they have different units and different values.

Learn more about displacement -

brainly.com/question/30155654

#SPJ11

Answer:The interior angle of a polygon is given by

The exterior angle of a polygon is given by

where n is the number of sides of the polygon

The statement

The interior of a regular polygon is 5 times the exterior angle is written as

Solve the equation

That's

Since the denominators are the same we can equate the numerators

That's

180n - 360 = 1800

180n = 1800 + 360

180n = 2160

Divide both sides by 180

n = 12

I).

The interior angle of the polygon is

The answer is

150°

II.

Interior angle + exterior angle = 180

From the question

Interior angle = 150°

So the exterior angle is

Exterior angle = 180 - 150

We have the answer as

30°

III.

The polygon has 12 sides

IV.

The name of the polygon is

Dodecagon

Step-by-step explanation:

The general solution of the differential equation is: y(t) = c1e^t + c2te^t + c3t²e^t + c4e^(2t) + c5e^(3t)

Thus, c1, c2, c3, c4, and c5 are arbitrary constants.

To find the general solution of the differential equation y⁵ − 8y⁴ + 16y′′′ − 8y′′ + 15y′ = 0, we follow these steps:

Step 1: Substituting y = e^(rt) into the differential equation, we obtain the characteristic equation:

r⁵ − 8r⁴ + 16r³ − 8r² + 15r = 0

Step 2: Solving the characteristic equation, we factor it as follows:

r(r⁴ − 8r³ + 16r² − 8r + 15) = 0

Using the Rational Root Theorem, we find that the roots are:

r = 1 (with a multiplicity of 3)

r = 2

r = 3

Step 3: Finding the solution to the differential equation using the roots obtained in step 2 and the formula y = c1e^(r1t) + c2e^(r2t) + c3e^(r3t) + c4e^(r4t) + c5e^(r5t).

Therefore, the general solution of the differential equation is:

y(t) = c1e^t + c2te^t + c3t²e^t + c4e^(2t) + c5e^(3t)

Thus, c1, c2, c3, c4, and c5 are arbitrary constants.

Learn more about differential equation

https://brainly.com/question/32645495

#SPJ11

Report on Commonalities Among Three Chosen Regions

For this assignment, three regions of the world have been selected to identify commonalities among them. The chosen regions are North America, Europe, and East Asia. Through internet research, several commonalities have been identified that are shared among these regions. Below are five commonalities found:

Economic Development:

All three regions, North America, Europe, and East Asia, are characterized by significant economic development. They are home to some of the world's largest economies, such as the United States, Germany, China, and Japan. These regions exhibit high levels of industrialization, technological advancement, and trade activities. Their economies contribute significantly to global GDP and are major players in international commerce.

Technological Advancement:

Another commonality among these regions is their emphasis on technological advancement. They are known for their innovation, research and development, and technological infrastructure. Companies and industries in these regions are at the forefront of technological advancements in fields such as information technology, automotive manufacturing, aerospace, pharmaceuticals, and more.

Cultural Diversity:

North America, Europe, and East Asia are culturally diverse regions, with a rich tapestry of different ethnicities, languages, and traditions. Immigration and historical influences have contributed to the diversity seen in these regions. Each region has a unique blend of cultural practices, cuisines, art, music, and literature. This diversity creates vibrant multicultural societies and fosters an environment of cultural exchange and appreciation.

Democratic Governance:

A commonality shared among these regions is the prevalence of democratic governance systems. Many countries within these regions have democratic political systems, where citizens have the right to participate in the political process, elect representatives, and enjoy individual freedoms and rights. The principles of democracy, rule of law, and respect for human rights are important pillars in these regions.

Education and Research Excellence:

North America, Europe, and East Asia are known for their strong education systems and institutions of higher learning. These regions are home to prestigious universities, research centers, and educational initiatives that promote academic excellence. They attract students and scholars from around the world, offering a wide range of educational opportunities and contributing to advancements in various fields of study.

In conclusion, the regions of North America, Europe, and East Asia share several commonalities. These include economic development, technological advancement, cultural diversity, democratic governance, and education and research excellence. Despite their geographical and historical differences, these regions exhibit similar traits that contribute to their global significance and influence.

Answer:

For this assignment, three regions of the world have been selected to identify commonalities among them. The chosen regions are North America, Europe, and East Asia. Through internet research, several commonalities have been identified that are shared among these regions. Below are five commonalities found:

Economic Development:

All three regions, North America, Europe, and East Asia, are characterized by significant economic development. They are home to some of the world's largest economies, such as the United States, Germany, China, and Japan. These regions exhibit high levels of industrialization, technological advancement, and trade activities. Their economies contribute significantly to global GDP and are major players in international commerce.

Technological Advancement:

Another commonality among these regions is their emphasis on technological advancement. They are known for their innovation, research and development, and technological infrastructure. Companies and industries in these regions are at the forefront of technological advancements in fields such as information technology, automotive manufacturing, aerospace, pharmaceuticals, and more.

Cultural Diversity:

North America, Europe, and East Asia are culturally diverse regions, with a rich tapestry of different ethnicities, languages, and traditions. Immigration and historical influences have contributed to the diversity seen in these regions. Each region has a unique blend of cultural practices, cuisines, art, music, and literature. This diversity creates vibrant multicultural societies and fosters an environment of cultural exchange and appreciation.

Democratic Governance:

A commonality shared among these regions is the prevalence of democratic governance systems. Many countries within these regions have democratic political systems, where citizens have the right to participate in the political process, elect representatives, and enjoy individual freedoms and rights. The principles of democracy, rule of law, and respect for human rights are important pillars in these regions.

Education and Research Excellence:

North America, Europe, and East Asia are known for their strong education systems and institutions of higher learning. These regions are home to prestigious universities, research centers, and educational initiatives that promote academic excellence. They attract students and scholars from around the world, offering a wide range of educational opportunities and contributing to advancements in various fields of study.

In conclusion, the regions of North America, Europe, and East Asia share several commonalities. These include economic development, technological advancement, cultural diversity, democratic governance, and education and research excellence. Despite their geographical and historical differences, these regions exhibit similar traits that contribute to their global significance and influence.

- Fixed cost: $4000, Marginal cost per item: $2.8, Price: $4

To identify the fixed cost, marginal cost per item, and the price at which the item is sold, we can analyze the given functions.

1. Fixed cost:
The fixed cost refers to the cost that remains constant regardless of the quantity produced or sold. In this case, the fixed cost is represented by the constant term in the total cost function. Looking at the equation C = 4000 + 2.8q, we can see that the fixed cost is $4000.

2. Marginal cost per item:
The marginal cost per item represents the additional cost incurred when producing or selling one more item. To find the marginal cost per item, we need to calculate the derivative of the total cost function with respect to the quantity (q).

Differentiating the total cost function C = 4000 + 2.8q with respect to q, we get:
dC/dq = 2.8

Therefore, the marginal cost per item is $2.8.

3. Price:
The price at which the item is sold is represented by the revenue per item. Looking at the revenue function R = 4q, we can see that the price at which the item is sold is $4.

To know more about " Fixed cost, Marginal cost , Price "

https://brainly.com/question/30165613

#SPJ11

The equation "t = 3w" represents inverse proportionality between t and w, where t is equal to three times the reciprocal of w.

To determine if t is inversely proportional to w, we need to check if there is a constant k such that t = k/w.

Let's evaluate each equation:

t = 3w

This equation does not represent inverse proportionality because t is directly proportional to w, not inversely proportional. As w increases, t also increases, which is the opposite behavior of inverse proportionality.

t = 3W

Similarly, this equation does not represent inverse proportionality because t is directly proportional to W, not inversely proportional. The use of uppercase "W" instead of lowercase "w" does not change the nature of the proportionality.

t = w + 3

This equation does not represent inverse proportionality. Here, t and w are related through addition, not division. As w increases, t also increases, which is inconsistent with inverse proportionality.

t = w - 3

Once again, this equation does not represent inverse proportionality. Here, t and w are related through subtraction, not division. As w increases, t decreases, which is contrary to inverse proportionality.

t = 3m

This equation does not involve the variable w. It represents a direct proportionality between t and m, not t and w.

Based on the analysis, none of the given equations exhibit inverse proportionality between t and w.

for such more question on proportional

https://brainly.com/question/870035

#SPJ8

The determinant of the matrix M is 0, and the inverse matrix [tex]M^{-1}[/tex] is undefined.

To find the determinant of the matrix and the inverse using the adjoint method, we start with the given matrix M:

[tex]M = \[\begin{bmatrix}2+2x^3 & 2-2x^2+4x^3 & 0 \\-x^3 & 1+x^2-2x^3 & 0 \\10+6x^2 & 20+12x^2-3-3x^2 & 0 \\\end{bmatrix}\][/tex]

To find the determinant of M, we can use the Laplace expansion along the first row:

[tex]det(M) = (2+2x^3) \[\begin{vmatrix}1+x^2-2x^3 & 0 \\20+12x^2-3-3x^2 & 0 \\\end{vmatrix}\] - (2-2x^2+4x^3) \[\begin{vmatrix}-x^3 & 0 \\10+6x^2 & 0 \\\end{vmatrix}\][/tex]

[tex]det(M) = (2+2x^3)(0) - (2-2x^2+4x^3)(0) = 0[/tex]

Therefore, the determinant of M is 0.

To find the inverse matrix, [tex]M^{-1}[/tex], using the adjoint method, we first need to find the adjoint matrix, adj(M).

The adjoint of M is obtained by taking the transpose of the matrix of cofactors of M.

[tex]adj(M) = \[\begin{bmatrix}C_{11} & C_{21} & C_{31} \\C_{12} & C_{22} & C_{32} \\C_{13} & C_{23} & C_{33} \\\end{bmatrix}\][/tex]

Where [tex]C_{ij}[/tex] represents the cofactor of the element [tex]a_{ij}[/tex] in M.

The inverse of M can then be obtained by dividing adj(M) by the determinant of M:

[tex]M^{-1} = \(\frac{1}{det(M)}\) adj(M)[/tex]

Since det(M) is 0, the inverse of M does not exist.

Therefore, [tex]M^{-1}[/tex] is undefined.

To know more about determinant, refer here:

https://brainly.com/question/31867824

#SPJ4