The volume of 2.5 kg of gasoline is approximately 3,472 mL (or 3.472 L).
To calculate the volume of a substance, we can use the formula:
Volume = Mass / Density
In this case, the mass of the gasoline is given as 2.5 kg, and the density is provided as 0.718 g/mL.
First, we need to convert the mass from kilograms to grams:
2.5 kg * 1,000 g/kg = 2,500 g
Next, we can substitute the values into the formula:
Volume = 2,500 g / 0.718 g/mL
To simplify the calculation, we can convert the density from grams per milliliter to grams per liter:
0.718 g/mL * 1,000 mL/L = 718 g/L
Now, we can divide the mass by the density:
Volume = 2,500 g / 718 g/L ≈ 3.472 L
Since 1 liter (L) is equal to 1,000 milliliters (mL), the volume can also be expressed as 3,472 mL.
The volume of 2.5 kg of gasoline is approximately 3,472 mL (or 3.472 L). This calculation is based on the given density of 0.718 g/mL.
By dividing the mass by the density, we can determine the volume of the substance. It is important to ensure consistent units when performing calculations involving density and volume conversions.
Learn more about volume of the substance here https://brainly.com/question/29371598
#SPJ11
A liquid food oil:
Select one:
O a. is manufactured from beef fat.
O b. is manufactured by hydrogenation of corn oil.
O c. contains primarily saturated fatty acids.
O d. contains primarily unsaturated fatty acids.
Liquid food oil is typically derived from plant sources such as soybean, rapeseed (canola), corn, cottonseed, sunflower, and peanut, among others. In this case, the answer is letter D:
it contains primarily unsaturated fatty acids.What is liquid food oil?Liquid food oil is a type of fat that remains liquid at room temperature. As opposed to solid fats such as butter or lard,
liquid fats are commonly derived from plant sources such as soybean, rapeseed (canola), corn, cottonseed, sunflower, and peanut, among others.Oils that are liquid at room temperature include various types of vegetable oils, such as soybean, rapeseed (canola), corn, cottonseed, sunflower, and peanut oil.
The common characteristic of these oils is that they are derived from plants, which is why they contain mostly unsaturated fatty acids instead of saturated fatty acids.Liquid food oils are considered healthier than solid fats because of their unsaturated fat content. Monounsaturated and polyunsaturated fats are the two types of unsaturated fatty acids found in liquid oils.
These fats have been linked to a reduced risk of heart disease, stroke, and other health problems when consumed in moderation.Liquid food oils can be used for a variety of purposes, including cooking, baking, frying, salad dressings, and marinades.
Their liquid state makes them easier to measure, pour, and cook with. As a result, they are a preferred ingredient for many chefs and home cooks alike.
To know more about Liquid visit;
brainly.com/question/20922015
#SPJ11
Match the type of radiation with it's characteristics. Alpha ( a) Decay \( \operatorname{Beta} \) ( \( \beta \) ) Decay Gamma (ү) Emission Positron Emission \( \checkmark[ \) Choose ] High-energy pho
The type of radiation can be matched with its characteristics as follows:
- Alpha (α) Decay:
- Beta (β) Decay:
- Gamma (γ) Emission:
- Positron Emission:
- High-energy photons
- Alpha (α) Decay: In alpha decay, an atomic nucleus emits an alpha particle, which consists of two protons and two neutrons. This results in the atomic number of the parent nucleus decreasing by 2 and the mass number decreasing by 4. Alpha particles have a positive charge and relatively low penetration power.
- Beta (β) Decay: In beta decay, a neutron in the atomic nucleus is converted into a proton or vice versa. This results in the emission of a beta particle, which can be either an electron (β-) or a positron (β+). Beta particles have a negative charge and moderate penetration power.
- Gamma (γ) Emission: Gamma emission involves the release of high-energy electromagnetic radiation from an excited atomic nucleus. Gamma rays have no charge and high penetration power.
- Positron Emission: Positron emission occurs when a proton in the atomic nucleus is converted into a neutron, resulting in the emission of a positron. Positrons have a positive charge and are the antimatter counterparts of electrons.
- High-energy photons: High-energy photons refer to electromagnetic radiation with very high energy levels, typically in the X-ray or gamma-ray range. These photons have no charge and extremely high penetration power, making them highly energetic.
To know more about radiation click here:
https://brainly.com/question/31106159
#SPJ11
A sample of helium gas collected at a pressure of 0.755 atm and
a temperature of 304 K is found to occupy a volume of 536
milliliters. How many moles of He gas are in the sample?
mol
There are approximately 0.0162 moles of helium gas in the sample, collected at pressure of 0.755 atm and a temperature of 304 K is found to occupy a volume of 536 ml.
To find the number of moles of helium gas in the sample, we can use the ideal gas law equation:
PV = nRT
Where:
P stands for the gas pressure (in atmospheres),
V is the volume of the gas (in liters),
n is the quantity of gas moles,
R is the ideal gas constant (0.0821 L·atm/(mol·K)),
T is the gas's temperature (in Kelvin).
First, let's convert the given volume from milliliters to liters:
Volume (V) = 536 milliliters = 536/1000 = 0.536 liters
Now we can substitute the given values into the ideal gas law equation:
0.755 atm * 0.536 L
= n * 0.0821 L·atm/(mol·K) * 304 K
Simplifying the equation:
0.40528 = 24.9844n
Dividing both sides by 24.9844:
n = 0.40528 / 24.9844
n ≈ 0.0162 moles
Therefore, there are approximately 0.0162 moles of helium gas in the sample.
To know more about helium gas please refer:
https://brainly.com/question/538912
#SPJ11
Name the enantiomeric pairs: H₂C CH3 H₂C CI CH₂CH₂CH3 H₂CCI CH₂CH₂CH3 CH₂CH₂CH3 ICI CH3 H₂CCI " CH₂CH₂CH3 " CI H3C НЕ CH3 CH3 CH₂CH₂CH3 CI CH₂CH₂CH3 ICI None of the c
None of the compounds listed form enantiomeric pairs. It's important to note that for enantiomers to exist, compounds must have the same molecular formula and connectivity but differ in their three-dimensional arrangement.
Enantiomers are pairs of molecules that are non-superimposable mirror images of each other. To identify enantiomeric pairs, we look for compounds with a chiral center (asymmetric carbon atom) and opposite configurations at that carbon atom.
In the given list of compounds, none of them possess a chiral center. Therefore, they do not exhibit enantiomerism. Compounds like H₂C CH3, H₂C CI, CH₂CH₂CH3, H₂CCI CH₂CH₂CH3, CH₂CH₂CH3 ICI, and CH3 H₂CCI " CH₂CH₂CH3 " CI do not have a chiral center, and hence, they cannot form enantiomeric pairs.
Enantiomers exhibit distinct optical properties, such as rotating the plane of polarized light in opposite directions.
In this case, there are no compounds in the given list that satisfy the criteria for enantiomerism.
Learn more about enantiomeric pair at: brainly.com/question/6025721
#SPJ11
1 If you had a sample of 2400 radioactive atoms, how many of
them should you expect to remain (be undecayed) after one
half-life?
2 If one half-life for your coin flips represents 36 years, what
amoun
1. 1200 atoms
2. 1/4 or 25% of the original amount
1) Undecayed atoms = Initial atoms * (1/2)^(Number of half-lives)
Given:
Initial atoms = 2400
Number of half-lives = 1
Undecayed atoms = 2400 * (1/2)^(1) = 2400 * (1/2) = 1200 atoms
2) Remaining amount = Initial amount * (1/2)^(Number of half-lives)
Given:
Number of half-lives = 2
Remaining amount = Initial amount * (1/2)^(2) = Initial amount * (1/2)^2 = Initial amount * 1/4 = 1/4 of the Initial amount
Since one half-life represents 36 years, two half-lives would represent 2 * 36 = 72 years. After 72 years, the remaining amount would be 1/4 or 25% of the initial amount.
Learn more about atoms here:
brainly.com/question/1566330
#SPJ11
Calculate the pH of 0.342 L of a 0.25 M acetic acid - 0.26 M
sodium acetate buffer before (pH1) and after (pH2) the addition of
0.0057 mol of KOH . Assume that the volume remains constant. ( Ka
of aci
To calculate the pH of a buffer solution before and after the addition of a base, we need to consider the equilibrium between the weak acid (acetic acid, CH3COOH) and its conjugate base (acetate ion, CH3COO-).
Given:
Volume (V) = 0.342 L
Initial concentration of acetic acid (CH3COOH) = 0.25 M
Initial concentration of sodium acetate (CH3COONa) = 0.26 M
Amount of KOH added = 0.0057 mol
Step 1: Calculate the initial moles of acetic acid and acetate ion:
moles of CH3COOH = initial concentration * volume = 0.25 M * 0.342 L
moles of CH3COO- = initial concentration * volume = 0.26 M * 0.342 L
Step 2: Calculate the change in moles of CH3COOH and CH3COO- after the addition of KOH:
moles of CH3COOH remaining = initial moles of CH3COOH - moles of KOH added
moles of CH3COO- formed = initial moles of CH3COOH - moles of CH3COOH remaining
Step 3: Calculate the new concentrations of CH3COOH and CH3COO- after the addition of KOH:
new concentration of CH3COOH = moles of CH3COOH remaining / volume
new concentration of CH3COO- = moles of CH3COO- formed / volume
Step 4: Calculate the pH before and after the addition of KOH using the Henderson-Hasselbalch equation:
pH1 = pKa + log([CH3COO-] / [CH3COOH])
pH2 = pKa + log([CH3COO-] / [CH3COOH])
Note: The pKa value of acetic acid (CH3COOH) is typically around 4.75.
Substitute the values into the equations to calculate pH1 and pH2.
Please provide the pKa value of acetic acid for a more accurate calculation.
To know more about Equilibrium, visit
https://brainly.com/question/517289
#SPJ11
[4 points] An analyte measured at 272 nm showed absorbance of
0.0885, and when the same analyte solution was subjected to 254 nm,
it showed absorbance of 0.2557. (i) Which is the better wavelength
to
The better wavelength for measuring the analyte would be 254 nm.
To determine which wavelength is better for measuring the analyte, we need to compare the absorbances at 272 nm and 254 nm.
The absorbance of a sample at a particular wavelength is related to the concentration of the analyte and the molar absorptivity (extinction coefficient) of the analyte at that wavelength. A higher absorbance generally indicates a higher concentration or a higher molar absorptivity.
In this case, we have:
Absorbance at 272 nm = 0.0885
Absorbance at 254 nm = 0.2557
Comparing these values, we can see that the absorbance at 254 nm (0.2557) is significantly higher than the absorbance at 272 nm (0.0885). This suggests that the analyte has a higher molar absorptivity at 254 nm, meaning it absorbs more light at that wavelength.
Therefore, based on the provided data, the better wavelength for measuring the analyte would be 254 nm.
To learn more about molar visit;
https://brainly.com/question/31545539
#SPJ11
In a chemical reaction, exactly 2 mol of substance A react to produce exactly 3 mol of substance B. 2A-3B How many molecules of substance B are produced when 25.2 g of substance A reacts? The molar ma
The 2.28 x 1023 molecules of substance B are produced when 25.2 g of substance A reacts.
The given chemical equation is 2A → 3B. This equation can be interpreted as follows:
For every 2 moles of A that react, 3 moles of B are produced. Therefore, we can calculate the number of moles of substance A in 25.2 g using the given molar mass. The molar mass (M) of substance A is not given in the question, so let's assume it is 100 g/mole (just for the sake of the example). Therefore, the number of moles of substance A (n) is: n = m/ M n = 25.2 g / 100 g/mole n = 0.252 mole
According to the equation, every 2 moles of substance A produce 3 moles of substance B.
Therefore, the number of moles of B produced (x) is given by: x/n = 3/2x = (3/2) * n = (3/2) * 0.252 mole = 0.378 mole
Now, we can calculate the number of molecules of B produced using Avogadro's number (NA) and the number of moles of B (x):Number of molecules of B = x * NA= 0.378 m o l * 6.022 x 1023 mol-1= 2.28 x 1023 molecules
Therefore, 2.28 x 1023 molecules of substance B are produced when 25.2 g of substance A reacts.
to know more about Avogadro's number visit :
https://brainly.com/question/30340397
#SPJ11
QUESTION 12 Suppose you add a chemical that disrupts ionic bonds to a test tube containing protein. List three effects this would have on the protein.
Answer: If we add chemicals that disrupts ionic bonds in test tube containing protein then three major effects like Denaturation, Altered Solubility and Loss of Ligand Binding can occurs in proteins.
Explanation:
Denaturation: Proteins rely on ionic bonds, along with other types of non covalent bonds, for their three-dimensional structure and stability. Disrupting ionic bonds can lead to the unfolding or denaturation of protein.
Altered Solubility: Ionic bonds can contribute to the solubility of proteins in water or other solvents. Disrupting these bonds can change the protein's solubility properties.
Loss of Ligand Binding: Disrupting ionic bonds can affect the conformation of these binding sites, leading to a loss or alteration of ligand binding affinity.
Ideal Gas Law PV = nRT. R = 0.0821 L-atm/mol-K
A) What is the pressure (in atm) of a 1.80 mol gas sample at
40.0oC and occupying a 5000. mL container?
B) A sample of Xe(g) occupies 10.0 L at STP. How
A.The pressure of a 1.80 mol gas sample at 40.0°C and occupying a 5000 mL container can be calculated using the ideal gas law the pressure is found to be approximately 2.82 atm.
B. If sample of Xe(g) occupies 10.0 L at STP the pressure of the Xe gas sample occupying 10.0 L at STP remains at 1 atm.
A) The pressure of a 1.80 mol gas sample at 40.0°C and occupying a 5000 mL container can be calculated using the ideal gas law. Rearranging the formula to solve for pressure (P), we have P = nRT/V, where n is the number of moles, R is the gas constant, T is the temperature in Kelvin, and V is the volume. Plugging in the given values: n = 1.80 mol, R = 0.0821 L-atm/mol-K, T = 40.0 + 273.15 K (to convert Celsius to Kelvin), and V = 5000 mL (or 5.0 L), we can calculate the pressure. Substituting the values into the formula, we get P = (1.80 mol)(0.0821 L-atm/mol-K)(313.15 K)/(5.0 L). After performing the calculation, the pressure is found to be approximately 2.82 atm.
B) A sample of Xe (xenon) gas occupies 10.0 L at STP (standard temperature and pressure). STP is defined as a temperature of 0°C (273.15 K) and a pressure of 1 atm. Since the given conditions match the definition of STP, the pressure of the gas is already provided as 1 atm. Therefore, the pressure of the Xe gas sample occupying 10.0 L at STP remains at 1 atm.
To know more about ideal gas law click here :
https://brainly.com/question/30458409
#SPJ11
Which of the following is true of the deposition of a gaseous
substance?
Group of answer choices
ΔS° = 0 and ΔH° = 0.
ΔS° > 0 and ΔH° > 0.
ΔS° < 0 and ΔH° > 0.
ΔS° < 0 and
For the deposition of a gaseous substance, the condition is ΔS° < 0 and ΔH° > 0.
Deposition is the process in which a gas changes directly to a solid, without going through the liquid state. This process is accompanied by a decrease in entropy (ΔS° < 0) and an increase in enthalpy (ΔH° > 0).
The decrease in entropy is because the gas molecules are more disordered in the gas state than they are in the solid state. The increase in enthalpy is because energy is required to break the intermolecular forces in the gas state.
Here are some examples of deposition:
Water vapor in the atmosphere can condense directly to ice on a cold surface, such as a windowpane.
Carbon dioxide gas can sublime directly to dry ice at temperatures below -78.5°C.
Iodine vapor can sublime directly to solid iodine at room temperature.
Thus, for the deposition of a gaseous substance, the condition is ΔS° < 0 and ΔH° > 0.
To learn more about entropy :
https://brainly.com/question/30402427
#SPJ11
Determine the oxidation number of Na in the following
sodium-containing species: Na2CO3
The oxidation number of Na in the compound Na2CO3 is +1.
To determine the oxidation number of Na in Na2CO3, we need to consider the known oxidation numbers of other elements and the overall charge of the compound.
1. The compound Na2CO3 contains two Na atoms and one C atom, along with three O atoms.
2. Oxygen (O) typically has an oxidation number of -2, unless it is in a peroxide where it is -1.
3. Carbon (C) is more electronegative than hydrogen (H) but less electronegative than oxygen (O), so it usually has an oxidation number of +4 in compounds.
4. The compound Na2CO3 has a neutral charge, which means the sum of the oxidation numbers of all the elements must be zero.
5. Let's assign the oxidation number of Na as x. Since there are two Na atoms, the total oxidation number contribution from Na is 2x.
6. The oxidation number of C in CO3 is +4, and the oxidation number of O is -2. Since there are three O atoms in CO3, the total oxidation number contribution from O is 3*(-2) = -6.
7. Setting up the equation: 2x + 4 + (-6) = 0.
8. Solving the equation: 2x - 2 = 0, 2x = 2, x = 1.
Therefore, the oxidation number of Na in Na2CO3 is +1.
To know more about oxidation click here:
https://brainly.com/question/29263066
#SPJ11
Cryolite, Na, AIF, (s), an ore used in the production of aluminum, can be synthesized using aluminum oxide. Balance the equation for the synthesis of cryolite. equation: Al₂O, (s)+NaOH(1)+HF(g) Na,
The total mass of the excess reactants left over after the reaction is complete is 1.74846 kg of NaOH and 5.24252 kg of HF.
To balance the equation for the synthesis of cryolite, we need to ensure that the number of atoms of each element is the same on both sides of the equation. Here's the balanced equation:
2Al₂O₃(s) + 6NaOH(aq) + 12HF(g) → 2Na₃AlF₆(s) + 6H₂O(g)
Given:
Mass of Al₂O₃(s) = 14.4 kg
Mass of NaOH(aq) = 52.4 kg
Mass of HF(g) = 52.4 kg
To determine the mass of cryolite produced, we need to calculate the limiting reactant. The limiting reactant is the one that is completely consumed and determines the maximum amount of product formed.
Let's calculate the number of moles for each reactant:
Molar mass of Al₂O₃ = 101.96 g/mol
Molar mass of NaOH = 39.997 g/mol
Molar mass of HF = 20.006 g/mol
Number of moles of Al₂O₃ = (14.4 kg / 101.96 g/mol) = 141.1 mol
Number of moles of NaOH = (52.4 kg / 39.997 g/mol) = 131.0 mol
Number of moles of HF = (52.4 kg / 20.006 g/mol) = 2620.2 mol
Based on the balanced equation, the stoichiometric ratio between Al₂O₃, NaOH, and HF is 2:6:12. Therefore, for every 2 moles of Al₂O₃, we need 6 moles of NaOH and 12 moles of HF.
Now, let's determine the limiting reactant by comparing the moles of each reactant to the stoichiometric ratio:
Limiting moles of NaOH = (141.1 mol Al₂O₃ / 2 mol Al₂O₃) * (6 mol NaOH / 2 mol Al₂O₃) = 423.3 mol
Limiting moles of HF = (141.1 mol Al₂O₃ / 2 mol Al₂O₃) * (12 mol HF / 2 mol Al₂O₃) = 846.6 mol
Since the calculated moles of NaOH (423.3 mol) are less than the moles of HF (846.6 mol), NaOH is the limiting reactant.
Now, let's calculate the mass of cryolite produced using the stoichiometric ratio:
Molar mass of Na₃AlF₆ = 209.94 g/mol
Mass of cryolite produced = (423.3 mol Na₃AlF₆) * (209.94 g/mol) = 88,834.3 g = 88.8343 kg
Therefore, 88.8343 kg of cryolite will be produced.
To determine the excess reactants, we need to compare the moles of the limiting reactant (NaOH) with the stoichiometric ratio:
Excess moles of Al₂O₃ = (131.0 mol NaOH / 6 mol NaOH) * (2 mol Al₂O₃ / 6 mol NaOH) = 43.7 mol
Excess moles of HF = (131.0 mol NaOH / 6 mol NaOH) * (12 mol HF / 6 mol NaOH) = 262.0 mol
The excess reactants are NaOH and HF.
Now, let's calculate the total mass of the excess reactants left over:
Mass of excess NaOH = (43.7 mol NaOH) * (39.997 g/mol) = 1748.46 g = 1.74846 kg
Mass of excess HF = (262.0 mol HF) * (20.006 g/mol) = 5242.52 g = 5.24252 kg
Therefore, the total mass of the excess reactants left over after the reaction is complete is 1.74846 kg of NaOH and 5.24252 kg of HF.
Learn more about Cryolite from the link given below.
https://brainly.com/question/14498539
#SPJ4
In a study of the rearrangement of ammonium cyanate to urea in
aqueous solution at 50 °C NH4NCO(aq)(NH2)2CO(aq) the concentration
of NH4NCO was followed as a function of time. It was found that a
gra
1. For the rearrangement of ammonium cyanate to urea, the plot of 1/[NHNCO] versus time gave a straight line, indicating a first-order reaction with respect to NH4NCO. The slope of the line represents the rate constant, which was determined to be 1.66x10^2 M^(-1) min^(-1). 2. For the decomposition of nitramide to nitrogen dioxide and water, the plot of ln[NH2NO2] versus time gave a straight line, indicating a first-order reaction with respect to NH2NO2. The slope of the line represents the rate constant, which was determined to be -6.81x10^(-5) s^(-1).
1. In the study of the rearrangement of ammonium cyanate to urea, the plot of 1/[NHNCO] versus time resulted in a straight line. This indicates that the reaction follows first-order kinetics with respect to NH4NCO. The slope of the line in this plot represents the rate constant of the reaction, which was found to be 1.66x10^2 M^(-1) min^(-1). The positive slope indicates that the concentration of NH4NCO decreases with time.
2. In the study of the decomposition of nitramide to nitrogen dioxide and water, the plot of ln[NH2NO2] versus time resulted in a straight line. This suggests that the reaction follows first-order kinetics with respect to NH2NO2. The slope of the line in this plot represents the rate constant of the reaction, which was determined to be -6.81x10^(-5) s^(-1). The negative slope indicates that the concentration of NH2NO2 decreases exponentially with time.
In conclusion, the rearrangement of ammonium cyanate to urea is a first-order reaction with respect to NH4NCO, while the decomposition of nitramide is also a first-order reaction with respect to NH2NO2. The rate constants for these reactions were determined from the slopes of the respective plots. The negative slope for the decomposition of nitramide indicates that the concentration of NH2NO2 decreases over time, while the positive slope for the rearrangement of ammonium cyanate to urea indicates a decrease in the concentration of NH4NCO.
Learn more about ammonium cyanate here:
https://brainly.com/question/28901093
#SPJ11
The complete question is:
In a study of the rearrangement of ammonium cyanate to urea in aqueous solution at 50 °c NH4NCO(aq)NH2)2CO(aq) the concentration of NH4NCO was followed as a function of time. It was found that a graph of 1/[NHNCOl versus time in minutes gave a straight line with a slope of 1.66x102r1 min1 and a y-intercept of 1.07M1 Based on this plot, the reaction is v order in NH4NCO and the rate constant for the reaction is Mr1 min 1 zero first second Submit Answer Retry Entire Group 4 more group attempts remaining In a study of the decomposition of nitramide in aqueous solution at 25 °C NH2NO2(aq N20(g) + H2o(D the concentration of NH2NO2 was followed as a function of time It was found that a graph of In[NH2NO21l versus time in seconds gave a straight line with a slope of -6.81x10-5 s1 and a y-intercept of -1.85 ほasc d (n itus plot, ihe reaction 1:; order n NXX) N(), and thc rate constant ior ihe reaction zero first second Submit Answer Retry Entire Group 4 more group attempts remaining
What are the three main gases we breath?
a. N2,O2,
Ar b. CO2, O2,
S2 c. Ar, CO2, O2
d. N2, Ar, CO2
The three main gases we breathe are nitrogen (N2), oxygen (O2), and carbon dioxide (CO2).
When we inhale, the air contains approximately 78% nitrogen, 21% oxygen, and trace amounts of other gases like argon, carbon dioxide, and water vapor. Nitrogen is inert and does not participate in biological processes but helps to dilute oxygen for efficient respiration. Oxygen is necessary for the functioning of cells and is utilized in the process of cellular respiration to produce energy.
Carbon dioxide is a waste product of cellular respiration and is exhaled from the body. In summary, the three main gases we breathe are nitrogen, oxygen, and carbon dioxide. Nitrogen and oxygen make up the majority of the air we inhale, while carbon dioxide is a byproduct of cellular respiration that is exhaled from the body.
Learn more about gases here:
https://brainly.com/question/1369730
#SPJ11
Could someone please perform and analysis on this NMR spectra of
3-heptanone. I will leave a like (FYI by analysis i mean
like: 7-8 ppm: aromatics, 4 ppm: PhO-CH, 0 ppm:
R2Nh)
The given NMR spectra of 3-heptanone cannot be analyzed based on the information given, as 3-heptanone does not contain any of the functional groups listed in the description (aromatics, PhO-CH, or R2Nh).
Therefore, a "main answer" or specific analysis cannot be provided.However, in general, NMR spectra analysis involves identifying the chemical shifts (in ppm) of various functional groups or atoms in a molecule. This information can be used to determine the structure and composition of the molecule.In order to analyze the NMR spectra of a specific compound, it is necessary to have knowledge of the compound's structure and functional groups present.
Without this information, it is not possible to make accurate identifications of chemical shifts and functional groups based solely on the NMR spectra itself.
To learn more about proton NMR visit:
brainly.com/question/30701494
#SPJ11
please help all questions , thankyou
Stoichiometry Problems 1. The compound KCIO; decomposes according to the following equation: 2KCIO3 → 2KCI+ 30₂ a. What is the mole ratio of KCIO; to O₂ in this reaction? b. How many moles of O�
1a. The mole ratio of KCIO3 to O2 in the reaction is 2:3.
1b. From 6.0 moles of KCIO3, 9.0 moles of O2 can be produced.
1c. In question 1b, 5.41 x 10^24 molecules of O2 are produced.
2a. The balanced chemical equation for the synthesis reaction is Mg + Cl2 -> MgCl2.
2b. With 3 moles of chlorine, 1.5 moles of magnesium chloride can be produced.
3. If 15.0 mol of C2H5OH burns, 45.0 mol of oxygen is needed.
4a. To combine with 4.5 moles of Cl2, 3 moles of Fe are needed.
4b. If 240 g of Fe is used, 642.86 g of FeCl3 will be produced.
5. When 200.0 g of N2 reacts with hydrogen, 231.25 mol of NH3 is formed.
6. If 25.0 moles of Fe2O3 is used, 7,800 g of iron can be produced.
7. From 100.0 g of Al2O3, 56.1 g of aluminum metal can be produced.
1a. The balanced chemical equation shows that for every 2 moles of KCIO3, 3 moles of O2 are produced. Thus, the mole ratio of KCIO3 to O2 is 2:3.
1b. Since the mole ratio is 2:3, for every 2 moles of KCIO3, 3 moles of O2 are produced. Therefore, from 6.0 moles of KCIO3, we can expect to produce 9.0 moles of O2.
1c. To find the number of molecules of O2, we can use Avogadro's number. 1 mole of any substance contains 6.022 x 10^23 molecules. Therefore, 9.0 moles of O2 would contain 9.0 x 6.022 x 10^23 = 5.41 x 10^24 molecules of O2.
2a. The balanced chemical equation for the synthesis of magnesium chloride is Mg + Cl2 -> MgCl2.
2b. According to the balanced equation, for every 1 mole of magnesium chloride, 1 mole of magnesium reacts with 2 moles of chlorine. Therefore, with 3 moles of chlorine, we can produce 1.5 moles of magnesium chloride.
3. The balanced equation shows that for every 1 mole of C2H5OH, 3 moles of O2 are required. Therefore, if 15.0 mol of C2H5OH burns, we would need 15.0 x 3 = 45.0 mol of O2.
4a. From the balanced equation, we can see that 2 moles of Fe react with 3 moles of Cl2 to produce 2 moles of FeCl3. Therefore, the mole ratio of Fe to Cl2 is 2:3. To find the grams of Fe needed, we would multiply the number of moles of Cl2 (4.5 moles) by the molar mass of Fe (55.85 g/mol).
4b. Using the molar mass of Fe (55.85 g/mol) and the balanced equation, we can calculate the molar mass of FeCl3 (162.2 g/mol). Then, we can use the molar ratio to find the moles of FeCl3 produced from 240 g of Fe.
5. Using the balanced equation, we can determine the molar ratio between N2 and NH3. From the given mass of N2 (200.0 g) and its molar mass (28.02 g/mol), we can calculate the number of moles of N2. Then, using the molar ratio, we can determine the moles of NH3 produced.
6. Given the moles of Fe2O3 (25.0 moles) and the molar ratio from the balanced equation, we can calculate the moles of iron produced. Using the molar mass of iron (55.85 g/mol), we can convert the moles of iron to grams.
7. From the given mass of Al2O3 (100.0 g) and its molar mass (101.96 g/mol), we can calculate the number of moles of Al2O3. Then, using the molar ratio from the balanced equation, we can determine the moles of aluminum produced. Finally, using the molar mass of aluminum (26.98 g/mol), we can convert the moles to grams.
Learn more about mole here:
https://brainly.com/question/30885025
#SPJ11
The complete question is:
Stoichiometry Problems 1. The compound KCIO; decomposes according to the following equation: 2KCIO3 → 2KCI+ 30₂ a. What is the mole ratio of KCIO; to O₂ in this reaction? b. How many moles of O₂ can be produced by letting 6.0 moles of KCIO3 react based on the above equation? c. How many molecules of oxygen gas, O₂, are produced in question 1b? 2. Magnesium combines with chlorine, Cl₂, to form magnesium chloride, MgCl₂, during a synthesis reaction. a. Write a balanced chemical equation for the reaction. b. How many moles of magnesium chloride can be produced with 3 moles of chlorine? 3. Ethanol burns according to the following equation. If 15.0 mol of C₂H₂OH burns this way, how many moles of oxygen are needed? C₂H5OH + 302 → 200₂ + 3H₂O 4. Solutions of iron (III) chloride, FeCl3, are used in photoengraving and to make ink. This compound can be made by the following reaction: 2Fe + 3Cl₂ → 2FeCl3 a. How many grams of Fe are needed to combine with 4.5 moles of Cl₂? b. If 240 g of Fe is to be used in this reaction, with adequate Cl₂, how many moles of FeCl, will be produced? 5. Ammonia is produced synthetically by the reaction below. How many moles of NH3 are formed when 200.0 g of N₂ reacts with hydrogen? N₂ + 3H₂ → 2NH3 6. Iron metal is produced in a blast furnace by the reaction of iron (III) oxide and coke (pure carbon). If 25.0 moles of pure Fe₂O3 is used, how many grams of iron can be produced? The balanced chemical equation for the reaction is: Fe₂O3 + 3C → 2Fe + 3C0 7. Aluminum oxide is decomposed using electricity to produce aluminum metal. How many grams of aluminum metal can be produced from 100.0 g of Al₂O₂? 2A/203 → 4A1 + 30₂
Define the terms Total ion chromatogram and Selected ion
chromatogram. How may a Selected ion chromatogram be useful when
trying to calculate low levels of a specific pesticide in a river
water sample
A total ion chromatogram (TIC) is a type of chromatogram that shows the intensity of all ions present in a sample. A selected ion chromatogram (SIC) is a type of chromatogram that shows the intensity of only a specific set of ions.
In mass spectrometry, a chromatogram is a graph that shows the intensity of ions as a function of time. The time axis represents the retention time, which is the time it takes for an ion to travel through the mass spectrometer. The intensity axis represents the number of ions detected at a particular retention time. A TIC shows the intensity of all ions present in a sample. This can be useful for identifying the different components of a sample, but it can also be difficult to interpret because it can be difficult to distinguish between different ions that have similar masses. A SIC shows the intensity of only a specific set of ions. This can be useful for identifying a specific compound in a sample. For example, if you are trying to determine the concentration of a pesticide in a river water sample, you could use a SIC to monitor the intensity of the ions that are characteristic of that pesticide.
SICs can be more sensitive than TICs because they only detect the ions that you are interested in. This can be important for detecting low levels of a pesticide in a river water sample.
Here are some additional details about TICs and SICs:
TICs are typically used to provide a general overview of the components of a sample. They can be used to identify different compounds and to estimate their relative concentrations.
SICs are typically used to identify specific compounds in a sample. They can be used to determine the concentration of a specific compound with greater accuracy than a TIC.
To know more about selected ion chromatogram, click here:-
https://brainly.com/question/31827270
#SPJ11
need help asap, thank you !
What is the half-life (in min) of a radioactive isotope if the activity of a sample drops from 3,184 cpm to 199 cpm in 11.0 min? min F
The half-life (in min) of a radioactive isotope if the activity of a sample drops from 3,184 cpm to 199 cpm in 11.0 min is 2.34 min.
Given that the activity of a sample drops from 3,184 cpm to 199 cpm in 11.0 min.We are to determine the half-life of the radioactive isotope. We can use the following formula:
A = A0 (1/2)^(t/T)
A0 = initial activity
A = activity after time t
T = half-life of the radioactive isotope
t = time taken
(3,184) = A0(1/2)^(11.0/T)199 = A0(1/2)^(T/T)
Let us divide the second equation by the first equation:(199)/(3,184) = (1/2)^(11.0/T)×(1/2)^(-T/T)(199)/(3,184)
= (1/2)^(11.0/T-T/T)(199)/(3,184)
= (1/2)^(11.0/T-1)(199)/(3,184)
= 2^(-11/T+1)
Taking natural logarithms on both sides of the equation:
ln(199/3,184) = ln(2^(-11/T+1))ln(199/3,184)
= (-11/T+1)ln(2)ln(199/3,184) / ln(2) - 1 = -11/T1/T
= [ln(2) - ln(199/3,184)] / ln(2)T = 2.34 min
Therefore, the half-life (in min) of a radioactive isotope if the activity of a sample drops from 3,184 cpm to 199 cpm in 11.0 min is 2.34 min.
learn more about half-life here
https://brainly.com/question/1160651
#SPJ11
Suppose 52 mL of 0.212 M HCl is titrated with 0.171 M NaOH.
Calculate the pH of the resulting mixture after the addition of
24.2 mL (total) of strong base. Enter your answer to 2 decimal
places.
The pH of the resulting mixture after the addition of 24.2 mL of 0.171 M NaOH to 52 mL of 0.212 M HCl is 5.73. This pH value indicates that the solution is slightly acidic since it is below 7 on the pH scale.
To determine the pH of the resulting mixture, we need to calculate the moles of acid and base present and then determine the excess or deficit of each component.
First, we calculate the moles of HCl:
Moles of HCl = Volume of HCl (L) × Concentration of HCl (mol/L)
= 0.052 L × 0.212 mol/L
= 0.011024 mol
Next, we calculate the moles of NaOH:
Moles of NaOH = Volume of NaOH (L) × Concentration of NaOH (mol/L)
= 0.0242 L × 0.171 mol/L
= 0.0041422 mol
Since HCl and NaOH react in a 1:1 ratio, we can determine the excess or deficit of each component. In this case, the moles of HCl are greater than the moles of NaOH, indicating an excess of acid.
To find the final concentration of HCl, we subtract the moles of NaOH used from the initial moles of HCl:
Final moles of HCl = Initial moles of HCl - Moles of NaOH used
= 0.011024 mol - 0.0041422 mol
= 0.0068818 mol
The final volume of the mixture is the sum of the initial volumes of HCl and NaOH:
Final volume = Volume of HCl + Volume of NaOH
= 52 mL + 24.2 mL
= 76.2 mL
Now we can calculate the final concentration of HCl:
Final concentration of HCl = Final moles of HCl / Final volume (L)
= 0.0068818 mol / 0.0762 L
= 0.090315 mol/L
To calculate the pH, we use the equation:
pH = -log[H+]
Since HCl is a strong acid, it dissociates completely into H+ and Cl-. Therefore, the concentration of H+ in the solution is equal to the concentration of HCl.
pH = -log(0.090315)
≈ 5.73
The pH of the resulting mixture after the addition of 24.2 mL of 0.171 M NaOH to 52 mL of 0.212 M HCl is approximately 5.73. This pH value indicates that the solution is slightly acidic since it is below 7 on the pH scale. The excess of HCl compared to NaOH leads to an acidic solution.
To know more about solution ,visit:
https://brainly.com/question/29058690
#SPJ11
Upon complete reaction of the 155 mL of the NH4Cl solution with
the 137 mL of the NaOH solution, only ammonia, water, and NaCl are
left. If the container is left open for a long time, the ammonia
and
Upon complete reaction of the ammonium chloride (NH4Cl) solution with the NaOH solution, ammonia, water, and NaCl remain. If the container is left open for a long time, the ammonia will evaporate.
When ammonium chloride (NH4Cl) reacts with sodium hydroxide (NaOH), the following reaction occurs:
NH4Cl + NaOH → NH3 + H2O + NaCl
This means that ammonium chloride reacts with sodium hydroxide to produce ammonia (NH3), water (H2O), and sodium chloride (NaCl). The reaction is a double displacement reaction where the ammonium ion (NH4+) is replaced by the sodium ion (Na+), resulting in the formation of ammonia gas, water, and salt.
If the container is left open for a long time, the ammonia gas will gradually evaporate into the air. Ammonia is a highly volatile compound with a strong smell, and it easily turns into a gas at room temperature. As a result, over time, the ammonia gas will escape from the open container, leaving behind water and sodium chloride.
It's important to note that ammonia gas can be harmful if inhaled in large quantities, as it is an irritant to the respiratory system. Therefore, proper ventilation or containment measures should be taken when working with or storing ammonia solutions.
To know more about double displacement reaction click here :
https://brainly.com/question/29740109
#SPJ11
for this question I know the answer is Krypton gas. but I keep
getting an answer around 4.85 grams per mols. what am i doing
wrong?
85. A sample of neon effuses from a container in 76 seconds. The same amount of an unknown noble gas requires 155 seconds. Identify the gas.
The gas is Krypton gas. Answer: Krypton gas
The given time of effusion for the unknown gas is 155 s and for Neon, it is 76 s. Thus, the rate of effusion for the unknown gas is 76/155 times the rate of effusion of neon gas, which is equal to 0.4903. Mathematically, we can write this as: Rate of effusion of unknown gas/rate of effusion of Neon gas = t(Neon gas)/t(unknown gas)
Therefore, Rate of effusion of unknown gas/0.4903 = Rate of effusion of Neon gas/1Rate of effusion of unknown gas = 0.4903 × Rate of effusion of Neon gas
Now, since both the gases belong to the noble gases, their molecular weights will differ only by the atomic mass of their atoms. Atomic mass of Neon = 20.2 g/mol Atomic mass of Krypton = 83.8 g/mol
Now, since the molecular weights of the two noble gases are in the ratio of their atomic masses, we can write the following relation :Molecular weight of Krypton/Molecular weight of Neon = Atomic mass of Krypton/Atomic mass of Neon Or, Molecular weight of Krypton/83.8 = Molecular weight of Neon/20.2Or, Molecular weight of Krypton = (83.8/20.2) × Molecular weight of Neon Or, Molecular weight of Krypton = 4.152 × Molecular weight of Neon Since, the two gases contain equal number of atoms, so the molecular weight is directly proportional to the molar mass of the gas.
Therefore, Molar mass of Krypton = 4.152 × Molar mass of Neon = 4.152 × 20.18 = 84.09 g/mol
Now, we know that the rate of effusion of Krypton gas is given by: Rate of effusion of Krypton gas = (Rate of effusion of Neon gas) × sqrt(Molar mass of Neon/Molar mass of Krypton)= 4.85 g/mol. Thus, the gas is Krypton gas. Answer: Krypton gas
to know more about Molecular weight visit :
https://brainly.com/question/30209542
#SPJ11
The hydrolysis of ATP above pH 7 is entropically favored
because
a.The electronic strain between the negative charges is
reduced.
b.The released phosphate group can exist in multiple resonance
forms
c
The correct answer is c. There is an increase in the number of molecules in solution.
In hydrolysis reactions, such as the hydrolysis of ATP, a molecule is broken down by the addition of water. In the case of ATP hydrolysis, ATP (adenosine triphosphate) is converted to ADP (adenosine diphosphate) and inorganic phosphate (Pi) by the addition of water. This reaction results in an increase in the number of molecules in solution because ATP is a single molecule while ADP and Pi are two separate molecules.
Entropy is a measure of the disorder or randomness of a system. An increase in the number of molecules in solution leads to a greater degree of disorder, resulting in an increase in entropy. Therefore, the hydrolysis of ATP above pH 7 is entropically favored due to an increase in the number of molecules in solution.
The completed question is given as,
The hydrolysis of ATP above pH 7 is entropically favored because
a. The electronic strain between the negative charges is reduced.
b. The released phosphate group can exist in multiple resonance forms
c. There is an increase in the number of molecules in solution
d. There is a large change in the enthalpy.
Learn more about Entropy from the link given below.
https://brainly.com/question/20166134
#SPJ4
a. The electronic strain between the negative charges is reduced.
The hydrolysis of ATP above pH 7 is entropically favored because of the reduction in the electronic strain between the negative charges. The electronic strain between the negative charges is reduced because the hydrolysis of ATP results in the breaking of the bonds between the phosphate groups, leading to the release of energy. This energy causes the phosphate groups to move further apart from each other, thus reducing the electronic strain between the negative charges.
The hydrolysis of ATP above pH 7 is also favored due to the release of a highly reactive phosphate group that can exist in multiple resonance forms. This allows for the formation of many different chemical reactions that can be utilized by the cell to carry out its various metabolic functions. The hydrolysis of ATP is important in many cellular processes, including muscle contraction, nerve impulse transmission, and protein synthesis. In addition, the energy released from ATP hydrolysis is used to power many other cellular processes, such as active transport of molecules across membranes and cell division.
Learn more about ATP hydrolysis:
https://brainly.com/question/10910098
#SPJ11
Name the following compound as: NH2₂ CI. CI use the parent name for benzene with an amine group: as a benzene:
The compound given is NH2₂ CI. It can be named as benzeneamine chloride.
The given compound NH2₂ CI consists of a benzene ring with two amino groups (-NH₂) and a chloride group (-CI) attached to it. In organic chemistry nomenclature, the parent name for benzene is "benzene" itself. Since there are two amino groups present, they are indicated by the prefix "amine". The chloride group is named as "chloride".
Combining these names, we get the compound name as "benzeneamine chloride". This name accurately represents the structure of the compound, indicating the presence of a benzene ring, amino groups, and a chloride group. It follows the general naming conventions for organic compounds, where the substituents are listed alphabetically and indicated by appropriate prefixes and suffixes.
Lean more about nomenclature here:
https://brainly.com/question/16858650
#SPJ11
Calculate either [H,O+] or [OH-] for each of the solutions at 25 °C. Solution A: [OH-] = 1.83 x 10-7 M; [H₂O*] = Solution B: [H,O*] = 9.41 x 10 M: [OH-] = Solution C: [H,O*] = 6.63 x 10M; [OH"]= Wh
Solution A:
- [H3O+]: Approximately 5.29×10^−8 M
- [OH−]: 1.89×10^−7 M
Solution B:
- [H3O+]: 8.47×10^−9 M
- [OH−]: Approximately 1.18×10^−6 M
Solution C:
- [H3O+]: 0.000563 M
- [OH−]: Approximately 1.77×10^−11 M
Based on the calculated values:
- Solution A is acidic ([H3O+] > [OH−]).
- Solution B is basic ([OH−] > [H3O+]).
- Solution C is acidic ([H3O+] > [OH−]).
Solution A:
- [OH−] = 1.89×10−7 M (given)
- [H3O+] = ?
To calculate [H3O+], we can use the ion product of water (Kw) equation:
Kw = [H3O+][OH−] = 1.0×10^−14 M^2 at 25 °C
Substituting the given [OH−] value into the equation, we can solve for [H3O+]:
[H3O+] = Kw / [OH−] = (1.0×10^−14 M^2) / (1.89×10^−7 M) ≈ 5.29×10^−8 M
Therefore, [H3O+] for Solution A is approximately 5.29×10^−8 M.
Solution B:
- [H3O+] = 8.47×10−9 M (given)
- [OH−] = ?
Using the same approach as above, we can calculate [OH−]:
[OH−] = Kw / [H3O+] = (1.0×10^−14 M^2) / (8.47×10^−9 M) ≈ 1.18×10^−6 M
Therefore, [OH−] for Solution B is approximately 1.18×10^−6 M.
Solution C:
- [H3O+] = 0.000563 M (given)
- [OH−] = ?
Again, using the Kw equation:
[OH−] = Kw / [H3O+] = (1.0×10^−14 M^2) / (0.000563 M) ≈ 1.77×10^−11 M
Therefore, [OH−] for Solution C is approximately 1.77×10^−11 M.
The complete question is:
Calculate either [H3O+] or [OH−] for each of the solutions at 25 °C.
Solution A: [OH−]=1.89×10−7 M Solution A: [H3O+]= M
Solution B: [H3O+]=8.47×10−9 M Solution B: [OH−]= M
Solution C: [H3O+]=0.000563 M Solution C: [OH−]= M
Which of these solutions are basic at 25 °C?
Solution C: [H3O+]=0.000563 M
Solution A: [OH−]=1.89×10−7 M
Solution B: [H3O+]=8.47×10−9 M
Learn more about solutions here:
https://brainly.com/question/30665317
#SPJ11
pick correct method from choices below for this tranformation
choices:
NaBr
Br2,light
HOBr3
HBr
PBr3
More than 1 of these ^
none of these
None of the provided options (NaBr, Br2, light, HOBr, HBr, PBr3) are suitable for the given transformation.
Based on the provided options, NaBr is a compound (sodium bromide), Br2 represents molecular bromine, light typically indicates the use of light as a reagent or condition, HOBr is hypobromous acid, HBr is hydrobromic acid, and PBr3 is phosphorus tribromide. None of these options directly relate to the specific transformation described in the question.
Without additional information about the desired reaction or outcome, it is not possible to determine the correct method for the transformation.
Please provide more details about the specific reaction or desired outcome to determine the appropriate method.
Learn more about hypobromous acid here: brainly.com/question/32610912
#SPJ11
What is the mass of a 1690 kg/m³ object that is 0.893 m³ in size? number Submit Question unit kg Jump to Answer
The mass of the given object is 1510.77 kg. Formula used: Density (ρ) = Mass (m) / Volume (V). Using the above formula, we can calculate the mass by multiplying density with the volume of the object.
The mass of a 1690 kg/m³ object that is 0.893 m³ in size is 1510.77 kg.
Given data: Density (ρ) = 1690 kg/m³, Volume (V) = 0.893 m³,
Formula used: Density (ρ) = Mass (m) / Volume (V)
Calculation: The given density is the mass of a unit volume of the substance.
Using the above formula, we can calculate the mass by multiplying density with the volume of the object.
ρ = m/Vm
= ρ * V
Substituting the values in the above formula, we get, m = 1690 kg/m³ * 0.893 m³
= 1510.77 kg
Therefore, the mass of the given object is 1510.77 kg.
To know more about density, refer
https://brainly.com/question/26364788
#SPJ11
Which are the major organic products of this reaction? A) Methanol + 2-bromo-2-methylpropane B) Bromomethane + 2-bromo-2-methylpropane C) Bromomethane \( +t \)-butanol D) Methanol \( +t \)-butanol E)
The major organic products of the given reaction are 2-bromo-2-methylpropane and methanol. Therefore the correct option is A.
In the given reaction, different combinations of organic compounds are reacted to form new products. Let's analyze each option:
A) Methanol + 2-bromo-2-methylpropane:
When methanol and 2-bromo-2-methylpropane react, no significant chemical transformation occurs since both compounds are stable and do not readily undergo reactions with each other. Therefore, this combination does not produce any major organic products.
B) Bromomethane + 2-bromo-2-methylpropane:
The reaction between bromomethane and 2-bromo-2-methylpropane would likely result in an exchange of the bromine atoms, leading to the formation of 2-bromo-2-methylpropane and bromomethane. This exchange reaction occurs due to the nucleophilic substitution of the bromine atoms in the compounds.
C) Bromomethane + t-butanol:
The reaction between bromomethane and t-butanol could result in the nucleophilic substitution of the bromine atom in bromomethane by the hydroxyl group of t-butanol. This substitution would form t-butyl bromide and methanol as the major organic products.
D) Methanol + t-butanol:
No significant reaction is expected to occur between methanol and t-butanol since both compounds are relatively stable and do not readily react with each other.
Based on the analysis, the major organic products of the given reaction are 2-bromo-2-methylpropane and methanol, corresponding to option A.
To know more about 2-bromo-2-methylpropane click here :
https://brainly.com/question/32360611
#SPJ11
show all work.
Reaction 1: Use in question 8 Pb(NO3)2 (aq) + Lil (aq) LINO3(aq) + Pblz (s) 8. a. When the reaction above is balanced how many moles of lead nitrate are required to react with 2.5 moles of lithium iod
The number of moles of lead nitrate required to react with 2.5 moles of lithium iodide is 1.25 moles of lead nitrate.
The balanced chemical equation for the given chemical reaction is:
Pb(NO3)2(aq) + 2 LiI(aq) → PbI2(s) + 2 LiNO3(aq)
The balanced chemical equation shows that 1 mole of Pb(NO3)2 reacts with 2 moles of LiI.
So, 2.5 moles of LiI will react with (2.5/2) moles of Pb(NO3)2.
Number of moles of Pb(NO3)2 required = (2.5/2) moles
= 1.25 moles.
Moles of Pb(NO3)2 required to react with 2.5 moles of LiI = 1.25 moles of Pb(NO3)2.
howing the calculation work;
2 LiI(aq) = Pb(NO3)2(aq)
==> PbI2(s) + 2 LiNO3(aq)Moles of LiI
= 2.5Moles of Pb(NO3)2
Using the balanced equation, we know that the mole ratio of LiI to Pb(NO3)2 is 2:
1.2 LiI = 1 Pb(NO3)2
Therefore:1 LiI = 1/2 Pb(NO3)22.5 mol LiI
= (1/2)2.5 mol Pb(NO3)22.5 mol LiI
= 1.25 mol Pb(NO3)2
So, the number of moles of lead nitrate required to react with 2.5 moles of lithium iodide is 1.25 moles of lead nitrate.
To know more about lithium iodide visit:
https://brainly.com/question/32729615
#SPJ11
Question 12 What is/are the reagent(s) for following reaction? Problem viewing the image. Click Here O HgSO4, H₂O, H₂SO4 O 1. (Sia)2BH.THF 2. OH, H₂O2 O H₂, Lindlar catalyst Na, NH3(1) H₂, P
The correct answer for the given question is (D) H2, Pd. H2 and Pd are the reagents for the following reaction.
What is the hydrogenation reaction?The addition of hydrogen to a molecule is referred to as hydrogenation.
An unsaturated hydrocarbon is converted to a saturated hydrocarbon during this chemical reaction.
A chemical reaction occurs when atoms of one element or compound are rearranged and combined with atoms of another element or compound.
This reaction is usually represented by the equation;C=C + H2 → C-C Hydrogenation is a crucial reaction in the food industry.
To know more about reagents visit:
https://brainly.com/question/28463799
#SPJ11