Answer:
A. is the correct answer because Boron has 3 electrons too,
All elements in Group 13 have three electrons in their outermost energy level. The two most popular elements in this group are Boron and Aluminum.
Susana heats up a sample of red crystals. While the sample is being heated,a gas is released and a blue powder is left after heating. Is the sample of red crystals an element or compound?
Answer & Explanation:
Susana's red crystal sample is a compound because it was broken down into a gas and blue powder. It is not an element because elements cannot be broken down into simpler substances by ordinary means, such as heating.
Answer:
Susana's red crystal sample is a compound because it was broken down into a gas and blue powder. It is not an element because elements cannot be broken down into simpler substances by ordinary means, such as heating.
Explanation
Sample response form Edg
Which of the following are subatomic particles that orbit the outside of an atom?
A.
molecules
B.
electrons
C.
neutrons
D.
protons
A car is traveling with velocity of 40 m/s and has a mass of 1120 kg. The car has __________ energy.
A. Kinetic
B. Potential
Answer:
A.
Explanation:
The car has kinetic energy.
PLS PLS SOMEONE HELP ME ANSWER THESE QUESTIONS PLEEEAAASSSE!!
(press on the picture so you can see the questions better!)
Answer:
1)conduction
2) convection
3) conduction
4) radiation
5) radiation
6) radiation
7) conduction
8) conduction
9) radiation
10) convection
Explanation:
not 100% sure
Please hurry i really need it fast
The answers are here
In which figure does Colin do work?
A. Figure A
B. Figure B
C. Both figures
D. Neither figure
what is the half life of the element in the picture
HELP BRAINLIEST
Answer:
6 days
Explanation:
The following data were obtained from the question:
Original amount (N₀) = 100 mg
Amount remaining (N) = 6. 25 mg
Time (t) = 24 days
Half life (t½) =?
Next, we shall determine the decay constant. This can be obtained as follow:
Original amount (N₀) = 100 mg
Amount remaining (N) = 6. 25 mg
Time (t) = 24 days
Decay constant (K) =?
Log (N₀/N) = kt / 2.303
Log (100/6.25) = k × 24 / 2.303
Log 16 = k × 24 / 2.303
1.2041 = k × 24 / 2.303
Cross multiply
k × 24 = 1.2041 × 2.303
Divide both side by 24
K = (1.2041 × 2.303) / 24
K = 0.1155 /day
Finally, we shall determine the half-life of the isotope as follow:
Decay constant (K) = 0.1155 /day
Half life (t½) =?
t½ = 0.693 / K
t½ = 0.693 / 0.1155
t½ = 6 days
Therefore, the half-life of the isotope is 6 days
When you connect your evidence to your claim you are using your
1. brain
2.reasoning
3. test
Answer:
2. reasoning
Explanation:
PLS GIVE BRAINLIEST
How many moles are contained in 5.0 g of SO2:
Hey there!
Molar mass SO₂ = 64.066 g/mol
Therefore:
1 mole SO₂ -------------------- 64.066 g
(moles SO₂ ) ??---------------- 5.0 g
( moles SO₂) = 5.0 * 1 / 64.066
(moles SO₂) = 5.0 / 64.066
moles = 0.0780 moles of SO₂
Hope this helps!
I will give brainliest to answer this question right.
Which substance plays a major role in the eutrophication process?
A. ozone
B. salt
C. iron
D.phosphorus
Answer:
The substance is phosphorus or D!
Hope this helps!
What does a particular point on a line of a phase diagram represent ?
Answer:
the line represents the condition where pressure and heat have the same effects.
Answer: C) The melting point of a substance at a specific pressure.
Adaptations can only arise if
there is _______ within a species.
Answer:
Diversity?
Explanation:
Think thats bio
How many moles of acetaminophen are in a 0.8mL (0.0008L) dose of infants Tylenol
Answer:
0.007 mol
Explanation:
Step 1: Given data
Volume of acetaminophen: 0.8 mL
Step 2: Calculate the mass corresponding to 0.8 mL of acetaminophen
The density of acetaminophen is 1.26 g/mL.
0.8 mL × (1.26 g/mL) = 1 g
Step 3: Calculate the number of moles corresponding to 1 g of acetaminophen
The molar mass of acetaminophen is 151.16 g/mol.
1 g × (1 mol/151.16 g) = 0.007 mol
In each case, state whether the forces are balanced or unbalanced. If unbalanced, calculate the net force and describe the direction of the resultant force.
Answer:
Check explanation section.
Explanation:
In order to understand balanced force and unbalanced forces the first law of Newton should be considered as a basic knowledge.
For Balanced forces, there is equal equality in the direction of the forces. In balanced forces, there is no acceleration.
For unbalanced forces, there is acceleration that is go say there is going to be movement. Therefore, net force is equal to unbalanced forces.
(i) Suitcase dropped from a height.
Answer: since there is movement that is acceleration, then the force here is unbalanced force. The resultant force is downwards.towards the greater force direction.
(ii) A bicycle moving with constant velocity on a straight road.
Answer: As the bicycle moves at constant velocity on the straight road the force here is Balanced. Frictional forces balances the forces from the cyclist.
(iii) The rope does not move in a tug of war on applying force at both ends.
Answer: Balanced force.
How do the alveoli in the lungs move oxygen and nutrients into the bloodstream? 1.Gravity 4.Time 2.Diffusion 5.Pressure 3.Magnetic force
Answer:
2.Diffusion
Explanation:
As we metabolize certain nutrients for the correct functioning of our cells, carbon dioxide is produced as a result. We need oxygen in order to metabolize them, so we need to have a system to incorporate it, and to eliminate the carbon dioxide produced.
This system is provided by the interaction between the respiratory system, which allows the enter of oxygen into the body and gets rid of the carbon dioxide, and the circulatory system, which acts transporting carbon dioxide and oxygen to and from the lungs, respectively.
The surface available for the gaseous exchange is enlarged by the pulmonary alveoli. The alveoli are the terminal aerial spaces of the respiratory system and the structures where the exchange between the air and blood is produced. Each alveolus is surrounded by a net of capillaries, where oxygen is freed from the hemoglobin and moves into the cells by diffusion. Carbon dioxide, diffuses out of the cells into the capillaries, where most of it dissolves in the plasma of the blood.
Ajay bought bottle that was labelled as distilled water. He suspected it to be tap water. What test he could use without adding any chemical in it to find out for sure?
Answer:
Ajay should pass electric current through the water and connect a bulb to the circuit. If the bulb glows, it means that the water is tap water or else, it is distilled water.
Explanation:
This is because tap water contains little impurities like ions of some salts etc., which help in the conduction of electricity. But, distilled water is pure water and doesn't have any ions present in it. So, it doesn't conduct electricity.
Hope this helped
Ajay can test the distilled water by performing the electricity conduction test.
Distilled water has been the water that has an absence of ions and electrolytes. It has been a poor conductor of electricity.
The tap water has been constituted with minerals, electrolytes, and impurities, which results in the addition of conductivity to the water.
To test whether the water has been distilled or not, the circuit test can be performed The water has dipped wires connected with a battery and a bulb. the distilled water is a poor conductor did not allow the bulb to glow. However, with tap water bulb glow.
Thus, to test the water to be distilled or tap, the electricity conduction test has been performed.
For more information about distilled water, refer to the link:
https://brainly.com/question/2403536
Hydrofluoric acid (HF) can be prepared according to the following equation:
CaF2 + H2SO4 2 HF + CaSO4.
How many grams of HF can be prepared from 75.0 g of H2SO4 and 63.0 g of CaF2?
In the above problem, which reactant is limiting and which is in excess?
Given the balanced equation:
( Reaction type : double replacement)
CaF2 + H2SO4 → CaSO4 + 2HFI
We can determine the number of grams prepared from the quantity of 75.0 H2SO4, and 63.0g of CaF2 by converting these grams to moles per substance.
This can be done by evaluating the atomic mass of each element of the substance, and totaling it to find the molecular mass.
For H2SO4 or hydrogen sulfate it's molecular mass is the sum of the quantity of atomic mass per element. H×2 + S×1 + O×4 = ≈1.01×2 + ≈32.06×1 + ≈16×4 = 2.02 + 32.06 + 64 = 98.08 u (Dalton's or Da) or g / mol.
For CaF2 or calcium fluoride, it's molecular mass adds 1 atomic mass of calcium and 2 atomic masses of fluoride due to the number of atoms.
Ca×1 + F×2 = ≈40.07×1 + ≈19×2 = 40.08 + 38 = 78.07 u (Da or Dalton's) or g / mol.
The limiting reactant in the given balanced reaction is sulphuric acid. The mass of HF produced from 75 g of H₂SO₄ is 30 g.
What is limiting reactant?The limiting reactant in a species is the reactant which is fewer in amount and thus determine the yield of the product.
In the given reaction, one mole of calcium fluoride reacts with one mole of sulphuric acid to give two moles of HF. The molar mass of calcium fluoride CaF₂ is 78 g/mol the weight taken here is 63 g. Thus number of moles is 63/78 = 0.87 moles.
The molar mass of sulphuric acid H₂SO₄ is 100g/mol. The weight taken here is 75 g and thus, number of moles is 75/100 = 0.75 moles. One mole of calcium fluoride need one mole of H₂SO₄ . Thus 0.87 neede 0.87 moles of H₂SO₄ . But here we have only 0.75. Thus it is the limiting reactant.
As per the reaction, one mole or 100 g of H₂SO₄ produce 2 moles or 40 g of HF (molar mass = 20 g/mol). Thus mass of HF produced from 75 g is calculated as follows:
mass of HF = (75 × 40)/100
= 30 g.
Hence, mass of HF produced in this reaction is 30 g.
To find more about limiting reactant, refer the link below:
https://brainly.com/question/2948214
#SPJ2
Which of the following elements would you expect to be ductile and
malleable?
Germanium (Ge)
Argon (Ar)
O O O O
Nitrogen (N)
O Zirconium (Zr)
Answer:
ductile - germanium
mellabe - zirconium
why water can be consider as an acid as well as base .explain briefly
Why do clothes stick together when coming out of a dryer? And do the clothes start off as neutral?
here is what came up when i searched it up:
"The attraction between protons and electrons can also make clothes stick together in the dryer. When you dry clothes in the dryer, different fabrics rub together, and electrons from a cotton sock (for instance) may rub off onto a polyester shirt."
Sometimes, clothes can get stuck together after they come out of a dryer because of static electricity.
No, clothes may not start off as neutral. Whether clothes have static charges before going into the dryer depends on different things.
Why do clothes stick together when coming out of a dryer?Static electricity happens when certain things touch and create an uneven amount of electrons. This can cause one material to have a positive charge and the other to have a negative charge. When clothes move and touch each other in a dryer, this rubbing can cause static electricity.
If the clothes are cleaned and dried correctly, they should have no charge or be evenly charged.
Read more about clothes here:
https://brainly.com/question/18269825
#SPJ6
Liquid Nitrogen’s temperature is minus what degress
Answer:
-320f
Explanation:
1. Raw egg to boiled egg.
2. Batter to idli.
3. Wet clothes to dry clothes.
4. Woollen yarn to knitted
sweater.
5. Grain to its flour.
6. Cold water to hot water.
7. Straight string to a coiled string.
8. Bud to flower.
9. Milk to Cheese.
10. Cowdung to biogas.
II. Ice cream to melted ice-cream.
12. Stretched rubber band to
its normal size.
13. Souring of milk.
14. Ripening of a mango.
15. Dissolving sugar in water.
these are reversible or Irreversible, chemical or physical, Natural or manmade, periodic or non periodic,desirable or undesirable?
Answer:
This is man made and natural
How do isotopes affect the average atomic mass of an element?
Answer:
The versions of an element with different neutrons have different masses and are called isotopes. The average atomic mass for an element is calculated by summing the masses of the element's isotopes, each multiplied by its natural abundance on Earth.
Explanation:
Which of the following is not an example of biased language?
a.
“You are too short to reach that.”
b.
“Are you deaf?”
c.
“Move along, grandpa!”
d.
“I think I’ve been gypped.”
Answer:
I think it is D.
Explanation:
Answer:
b
Explanation:
5) If an atom has a positive charge what is it called?
Answer:
An atom that has a negative or positive charge it is called an ion.
Answer:
It''s called a Cation
Explanation:
What is the energy of a wave with a wavelength of 2.25 nm?
The energy of a wave : 8.835.10⁻¹⁷ J
Further explanationThe energy in one photon can be formulated as
E = h. fWhere
h = Planck's constant (6.626.10⁻³⁴ Js)
f = Frequency of electromagnetic waves
f = c / λ
c = speed of light
= 3,10⁸ m/s
λ = wavelength
λ = wavelength of a wave = 2.25 nm = 2.25 x 10⁻⁹m
[tex]\tt E=h.\dfrac{c}{\lambda}\\\\E=6.626.10^{-34}\times \dfrac{3.10^8}{2.25.10^{-9}}\\\\E=8.835\times 10^{-17}~J[/tex]
7. Which of the following is always true when a substance undergoes a
phase change? *
O A. The molecules keep moving at the same average speed.
B. The substance becomes a liquid as it heats up.
C. The melting point of the substance changes.
D. The substance is made up of the same type of molecules.
The following answered has been deleted due to multiple violations to our Terms of Service.
what is the difference between fermentation and alcohol
Answer:
Unlike lactic acid fermentation where-in the end product is lactic acid, the 'waste' material in an alcohol respiration is ethanol (an alcohol) and CO2 (carbon dioxide). Human beings have already perfected the use of this process for commercial purposes like in the production of beer, wine and bread
Explanation:
In alcoholic fermentation, pyruvate changes to alcohol and carbon dioxide. This type of fermentation is carried out by yeasts and some bacteria.
DESPERATE WILL GIVE BRAILIST AND THANKXS
Which statement is true about a rock layer deposited on top of another rock layer?
A- It is younger than the rock layer below.
B- It is older than the rock layer below.
C- It is the same age as the rock layer below.
D- It is no different than the rock layer below
Hello there!
Your answer is C.
Answer:
The right option is; A. It is younger than the rock layer below.
Explanation:
A rock layer deposited on top of another rock layer is younger than the rock layer below. This is based on the law of superposition which states that in any undeformed sequence of rocks that are laid down in layers, the youngest layer of rock will be on top of the sequence, while the oldest layer will be at the bottom of the sequence.
In this unbalanced chemical equation, which element is not conserved?
3LIOH + H3PO4 Li PO4 + 3H20
A. O
B. H
C. P
D. LI
Answer:
LI
Explanation:
There is three Li in the start but One Li after
Q3: Fingers and hands pulling, pushing, pressing, or lifting are all examples of applying a
Is it friction gravity motion or force
Answer:
force
Explanation:
because the force