PLEASE HELPPPPPPPPPP​

Answer:

Answer to An object moves clockwise around a circle centered at the origin with radius 6 m beginning at ... 6 M Beginning At The Point (0,6) B. Find A Position Function R That Describes The Motion If It Occurs With Speed E T A. R(t)= S The Motion Of The Object Moves With A Constant Speed, Completing 1 Lap Every 12 S.

Explanation:

Answer:

Explanation:

We need the power equation here:

P = W/t where W is work and is defined as

W = F*displacement.

Force is a measure in Newtons, which is also weight. We have the mass of the piano, but we need to find the weight:

w = mg so

w = 166(9.8) so

w = 1600N, rounded to the correct number of sig dig. We use that now in the power equation:

[tex]4560=\frac{(1600)(15)}{t}[/tex] and isolating the unknown:

[tex]t=\frac{(1600)(15)}{4560}[/tex] so

t = 5.3 seconds

Answer: The mutual inductance of these solenoids is [tex]2.88 \times 10^{-7} H[/tex].

Explanation:

Given: Length = 50.0 cm (1 cm = 0.01 m) = 0.50 m

[tex]N_{1}[/tex] = 6750

[tex]N_{2}[/tex] = 15

Radius = [tex]\frac{0.120 cm}{2} = 0.6 cm = 6 \times 10^{-4} m[/tex]

As inner of a solenoid resembles the shape of a circle. So, its area is calculated as follows.

[tex]Area = \pi \times r^{2} = \pi \times (6 \times 10^{-4})^{2}[/tex]

Formula used to calculate mutual conductance of two solenoids is as follows.

[tex]M = \frac{\mu_{o} \times A \times N_{1} \times N_{2}}{l}[/tex]

where,

M = mutual conductance

A = area

[tex]\mu_{o}[/tex] = relative permeability = [tex]4 \pi \times 10^{-7} Tm/A[/tex]

[tex]N_{1}[/tex] = no. of coils in outer solenoid

[tex]N_{2}[/tex] = no. of coils in inner solenoid

l = length

Substitute the values into above formula as follows.

[tex]M = \frac{\mu_{o} \times A \times N_{1} \times N_{2}}{l}\\= \frac{4 \pi \times 10^{-7} Tm/A \times \pi (6 \times 10^{-4})^{2} \times 6750 \times 15}{0.5 m}\\= 2.88 \times 10^{-7} H[/tex]

Thus, we can conclude that the mutual inductance of these solenoids is [tex]2.88 \times 10^{-7} H[/tex].

SOLVED DOWN BELOW

Explanation:

In series the same current goes thru both resistors, equiv resistance is 200 ohms, then using ohms law

I = 25/200

I= .125 amps or 125 ma

__________

R= r1 * r2 / r1 +r2

R= 100 * 100 / 100 + 100

R= 10000 / 200

R= 50 ohms

area= length × length

area = 4m × 9m

ans 36

Answer:

Explanation:

Answer:

If we convert a circuit into a current source with parallel load it is called source transformation

The elevator accelerates upward at an acceleration, then the magnitude of the force is 148.84 N.

The force is the action of push or pull which makes an object to move or stop.

Given the mass of child m =13.9 kg, acceleration a =0.898 m/s², then the force will be given by

F = m(g-a)

F = 13.9 x (9.81 - (-0.898))

F = 148.84 N

Thus, the magnitude of the force is  148.84 N.

Learn more about force.

https://brainly.com/question/13191643

#SPJ2

Answer:

Explanation:

The one above is incorrect, and I know this is late. Even if it doesn't help you I hope it helps people in the future! YES I AM TALKING ABOUT YOU FUTURE PEOPLE!! I know this is the answer because I have taken 5.11 Quiz: Uncrewed Spacecraft in K12. There will only be the questions and correct answers below.

1. Which planetary body was Spirit designed to explore?

Mars.

2. What is the name of the most distant manmade object in space? (Credit: shathaadnan64/lak521)

Voyager 1.

3. Which group was designed to study Saturn? (Credit: Brainly User/snowballandtigoya1xa

Voyager 1, Huygens, and Cassini.

4. Why are scientists interested in exploring Mars?

Possible evidence of life.

5. What do interplanetary space missions study?

Planets in the solar system.

Have an amazing day!!

a particle of violet light has exactly the same energy as a particle of red light

(a) 4.20 J

(b) 16.74 J

For a parallel plate vacuum capacitor with area A and whose plates are separated by by a distance of d, its capacitance C is given by;

C = A∈₀ / d              --------------------(i)

Where;

∈₀ = constant called permittivity of vacuum.

The energy U stored in such capacitor is given by;

U = [tex]\frac{1}{2}[/tex]CV²             ----------------------(ii)

or

U =  [tex]\frac{1}{2}[/tex](Q²/C)        -------------------(**)

Where;

V = potential difference or voltage across the plates.

Q = charge on the plates.

(a) If the charge is held constant

Combine equations (i) and (**) to give;

U =  [tex]\frac{1}{2}[/tex]Q² / (A∈₀ / d)     -----------------------(iii)

From the question;

The parallel plate capacitor has 8.40J energy stored and distance between plates is 2.30mm i.e

U = 8.40J

d = 2.30mm = 0.023m

Substitute these values into equation (iii)

8.40 =  [tex]\frac{1}{2}[/tex]Q² / (A∈₀ / 0.023)

8.40 =  [tex]\frac{1}{2}[/tex]Q² x (0.023 / A∈₀)

Multiply through by 2

2 x 8.40 = Q² x (0.023 / A∈₀)

16.80 = Q² x (0.023 / A∈₀)

Divide through by 0.023

16.80 / 0.023 = Q² x (0.023 / A∈₀) / 0.023

730.4 = Q² / (A∈₀)

Make Q² subject of the formula

Q² = 730.4(A∈₀)

Now, if the separation distance is decreased to 1.15mm and the voltage is held constant i.e

d = 1.15mm = 0.0115m

Q = constant [this means that Q² still remains 730.4(A∈₀) ]

The energy stored is found by substituting these values of d and Q² into equation (iii) as follows;

U =   [tex]\frac{1}{2}[/tex]Q² / (A∈₀ / d)

U = [tex]\frac{1}{2}[/tex](730.4(A∈₀)) / (A∈₀ / 0.0115)

U = [tex]\frac{1}{2}[/tex](730.4(A∈₀))(0.0115 / A∈₀)

U = [tex]\frac{1}{2}[/tex](730.4)(0.0115)

U = 4.20J

Therefore, the energy stored if the charge Q on the plates is held constant is 4.20 J

(b) If the voltage is held constant

Combine equations (i) and (ii) to give;

U =  [tex]\frac{1}{2}[/tex](A∈₀ / d)V²     -----------------------(iv)

From the question;

The parallel plate capacitor has 8.40J energy stored and distance between plates is 2.30mm i.e

U = 8.40J

d = 2.30mm = 0.023m

Substitute these values into equation (iv)

8.40 =  [tex]\frac{1}{2}[/tex](A∈₀ / 0.023)V²

Multiply through by 2 x 0.023

2 x 0.023 x 8.40 = (A∈₀)V²

2 x 0.023 x 8.40 = (A∈₀)V²

0.385 = (A∈₀)V²

Make V² subject of the formula

V² = 0.385/(A∈₀)

Now, if the separation distance is decreased to 1.15mm and the voltage is held constant i.e

d = 1.15mm = 0.0115m

V = constant [this means that V² still remains 0.385/(A∈₀) ]

The energy stored is found by substituting these values of d and V² into equation (iv) as follows;

U =  [tex]\frac{1}{2}[/tex](A∈₀ / 0.0115)[0.385/(A∈₀)]  

U = [tex]\frac{1}{2}[/tex](0.385/0.0115)

U = 16.74

Therefore, the energy stored if the voltage V across the plates is held constant is 16.74 J

Answer:

15 is the correct answer I.t.

a = (dx / dt)²

Explanation:  Unit of distance is m (metres) and unit of time is s (seconds) speed v is  first derivative of distance x versus time:

  v = dx / dt, unit is m/s.    Acceleration is second derivative of

 speed versus time  a = (dx / dt)² = (dv/dt) , unit is m/s²

Answer:

Explanation:

Acceleration is derived unit because it has two fundamental units involved i.e. meter and second square.

Answer:

the correct answer is B

Explanation:

The quantum numbers are the constants obtained when solving the Schrodinger equation, the first quantum number or principal quantum number (n), can take values ​​from zero to infinity.

This quantum number is placed as a coefficient in the quantum distribution.

In this case for phosphorus, the number is n = 3

the correct answer is B

Answer:

An example of positive velocity is throwing a ball upwards

An example of downward vertical velocity is when an object is dropped, for example a ball dropped from a height

Explanation:

In a vertical movement the acceleration is always downwards, therefore negative since it is created by the attraction of the Earth on the body.

An example of positive velocity is throwing a ball upwards

An example of downward vertical velocity is when an object is dropped, for example a ball dropped from a height

Answer:

The answer for this question is 50k N.m

Answer:

2.2 s

Explanation:

Using the equation for the period of a physical pendulum, T = 2π√(I/mgh) where I = moment of inertia of leg about perpendicular axis at one point =  mL²/3 where m = mass of man = 67 kg and L = height of man = 1.83 m, g = acceleration due to gravity = 9.8 m/s² and h = distance of leg from center of gravity of man = L/2 (center of gravity of a cylinder)

So, T = 2π√(I/mgh)

T = 2π√(mL²/3 /mgL/2)

T = 2π√(2L/3g)

substituting the values of the variables into the equation, we have

T = 2π√(2L/3g)

T = 2π√(2 × 1.83 m/(3 × 9.8 m/s² ))

T = 2π√(3.66 m/(29.4 m/s² ))

T = 2π√(0.1245 s² ))

T = 2π(0.353 s)

T = 2.22 s

T ≅ 2.2 s

So, the period of the man's leg is 2.2 s

Answer:

[tex]E=6.86\times 10^6\ N/C[/tex]

Explanation:

Given that,

Mass of the sphere, m = 2.1 g = 0.0021 kg

Charge, q = 3 nC

We need to find the magnitude of the electric field that balanced the weight of sphere. Let it is E. So,

qE = mg

[tex]E=\dfrac{mg}{q}[/tex]

Put all the values,

[tex]E=\dfrac{0.0021\times 9.8}{3\times 10^{-9}}\\\\E=6.86\times 10^6\ N/C[/tex]

So, the magnitude of the elecric field is [tex]6.86\times 10^6\ N/C[/tex].

Answer:

We should not try to park the car because its rest length is greater than the space available.

The car seems to be approximately equal to the friend (L = 3.16 m). Due to this reason he is sure to park.

Explanation:

We should not try to park the car because its rest length is greater than the space available.

The friend is sure about parking because the car appears short in length to him. For this, we will solve Einstein's length contraction formula from theory of relativity:

[tex]L = L_o\sqrt{1-\frac{v^2}{c^2}}[/tex]

where,

L = Relative length observed by friend = ?

L₀ = rest length = 6 m

v = relative speed = 85% of speed of light = 0.85c

Therefore,

[tex]L = (6\ m)\sqrt{1-\frac{(0.85c)^2}{c^2}}[/tex]

L = 3.16 m

Hence, the car seems to be approximately equal to the friend. Due to this reason he is sure to park.

Answer:

1.07 × 10⁸ m/s

Explanation:

Using the relativistic Doppler shift formula which can be expressed as:

[tex]\lambda_o = \lambda_s \sqrt{\dfrac{c+v}{c-v}}[/tex]

here;

[tex]\lambda _o[/tex] = wavelength measured in relative motion with regard to the source at velocity v

[tex]\lambda_s =[/tex] observed wavelength from the source's frame.

Given that:

[tex]\lambda _o[/tex] = 656.3 nm

[tex]\lambda_s =[/tex] 953.3 nm

We will realize that [tex]\lambda _o[/tex] > [tex]\lambda_s[/tex]; thus, v < 0 for this to be true.

From the above equation, let's make (v/c) the subject of the formula: we have:

[tex]\dfrac{\lambda_o}{\lambda_s}=\sqrt{\dfrac{c+v}{c-v}}[/tex]

[tex]\Big(\dfrac{\lambda_o}{\lambda_s} \Big)^2=\dfrac{c+v}{c-v}[/tex]

[tex]\dfrac{v}{c} =\dfrac{\Big(\dfrac{\lambda_o}{\lambda_s} \Big)^2-1}{\Big(\dfrac{\lambda_o}{\lambda_s} \Big)^2+1}[/tex]

[tex]\dfrac{v}{c} =\dfrac{\Big(\dfrac{656.3}{953.3} \Big)^2-1}{\Big(\dfrac{656.3}{953.3} \Big)^2+1}[/tex]

[tex]\dfrac{v}{c} =0.357[/tex]

v = 0.357 c

To m/s:

1c = 299792458 m/s

∴

0.357c = (299 792 458 × 0.357) m/s

= 107025907.5 m/s

= 1.07 × 10⁸ m/s

Answer:

(a) I = 1650000 A

(b) 4.125 T

Explanation:

Magnetic field, B = 5.5 T

distance, r = 0.06 m

(a) Let the current is I.

The magnetic field due to a long wire is given by

[tex]B =\frac{\mu o}{4\pi }\frac{2 I}{r}\\5.5= 10^{-7}\times \frac{2\times I}{0.06}\\I =1650000 A[/tex]

(b) Let the magnetic field is B' at distance r = 0.08 m.

[tex]B =\frac{\mu o}{4\pi }\frac{2 I}{r}\\B = 10^{-7}\times \frac{2\times 1650000}{0.08}\\B'= 4.125 T[/tex]

Answer:

The rotation rate is 15.3 rad/s.

Explanation:

maximum voltage, V = 120 V

Magnetic field, B = 1.5 T

length, L = 10.2 cm

width, W = 12.8 cm

Number of loops, N = 400

Let the rate of rotation is w.

The maximum voltage is given by

V = N B A w

120 = 400 x 1.5 x 0.102 x 0.128 x w

w = 15.3 rad/s

Answer:

Magnetism is a physical phenomenon that manifests itself in a force acting between magnets or other magnetized or magnetisable objects, and a force acting on moving electric charges, such as in current-carrying cables. The force action takes place by means of a magnetic field, which is generated by the objects themselves or otherwise. There are natural and artificial magnets. All magnets have two poles called the north pole and the south pole. The north pole of one magnet repels the north pole of another magnet and attracts the south pole of another magnet; the same with south poles.  

Answer: The correct statements are:

Explanation:

Solid state: In this state, the molecules are closely packed and cannot move freely from one place to another that means no space between them and the intermolecular force of attraction between the molecules are strong.

In solid substance, the particles are very close to each other due to this the intermolecular forces of attraction are strongest.

The key point about solid are:

Answer:

[tex](x \times 1) = (400 \times 2.5) \\ x = 1000 \: newtons[/tex]

[tex]y = 0[/tex]

Answer:

speed = 0.9 mm/s

Explanation:

time, t = 40 s

initial angular speed, wo = 0 rad/s

final frequency, f = 1/1.03 rps = 0.97 rps

final angular speed, w = 2 x 3.14 x 0.97 = 6.1 rad/s

time, t = 40 s

distance, r = 5.9 mm

The angular acceleration is given y the first equation of motion.

[tex]w =wo + \alpha t\\6.1 = 0 +\alpha \times 40\\\alpha = 0.1525 rad/s^{2}[/tex]

The linear velocity is

[tex]v =5.9\times 10^{-3}\times 0.1525 = 9\times 10^{-4} m/s[/tex]

speed, v = 0.9 mm/s

Answer:

b. is the correct answer ....