Answers
Also pls mark me brianliest!!
Related Questions
A negative correlation coefficient, such as -.89, means
A. There is no relationship between two variables.
B. As one variable tends to increase or become larger, the other decreases or becomes smaller.
C. There is a direct relationship. As one variable increases, the other also increases or becomes larger.
D. Nothing, a mistake has been made.
Answers
Answer:
B - As one variable increases the other decreases. (-1 to +1) coefficient
A man on the Moon observes two spaceships coming toward him from opposite directions at speeds of 0.600c and 0.600c. What is the relative speed of the two ships as measured by a passenger on either one of the spaceships
Answers
Answer:
If we use the equation for the transformation of velocities for moving frames:
v' = (v - u) / (1 - u * v / c^2) where we measure the speed of v' approaching from the left where v is in a frame moving at -u towards v'
v' = (.6 c - (-.6 c)) / (1 - (-.6 c) * .6 c / c^2) = 1.2 c / (1 + .6 * .6)
or v' = 1.2 c / (1 + .36) = .88 c
v is approaching from the left at .6 c in the reference frame and the other frame approaches from the right at -.6 c with speed u (-.6 c) and we measure the speed of v as seen in the frame moving to the left
A 35.0 g bullet strikes a 5.3 kg stationary wooden block and embeds itself in the block. The block and bullet fly off together at 7.1 m/s. What was the original speed of the bullet? (WILL GIVE BRAINLIEST)
Answers
Answer:
= 1200m/s or 1.2 x [tex]10^{3}[/tex] m/s
Explanation:
9. Cellular respiration occurs in what types of cells?
Answers
Answer:
Cellular respiration takes place in the cells of all organisms. It occurs in autotrophs such as plants as well as heterotrophs such as animals. Cellular respiration begins in the cytoplasm of cells. It is completed in mitochondria
Explanation:
Cellular respiration takes place in the cells of all organisms. It happening in autotrophs such as plantas as well as heterotrophs such as animals. Cellular respiration starts in the cytoplasm of cells.
It is finished in mitochondria.
If the output work of a simple machine equals the input work, the machine is said to have ______ efficiency.
Answers
If the output work of a simple machine equals the input work, the machine is said to have 100% efficiency.
[tex]\circ \: \: { \underline{ \boxed{ \sf{ \color{green}{Happy\:learning.}}}}}∘[/tex]
A wind turbine is rotating 5.98 rad/s when the wind abruptly stops blowing. It takes the turbine 27.5s to stop rotating. how many revolutions does his turbine make before it comes to a stop
Answers
Answer:
S = Vo t * 1/2 a t^2 equation for distance traveled
w = w0 t + 1/2 a t^2 equivalent circular equation where w equals omega
w = 5.98 * 27.5 + a (27.5)^2/ 2
a = (w2 - w1) / t = -5.98 / 27.5 = -.217
w = 5.98 * 27.5 - 1/2 * .217 * 27.5^2 = 82.4
Since 1 Rev = 2 pi radians
Rev = 82.4 / 2 * pi = 13.1 Rev
source of sinusoidal electromagnetic waves radiates uniformly in all directions. At a distance of 10.0 m from this source, the amplitude of the electric field is measured to be 3.50 N>C. What is the electric-field amplitude 20.0 cm from the source
Answers
Answer:
[tex]175\ \text{N/C}[/tex]
Explanation:
[tex]E_1[/tex] = Initial electric field = 3.5 N/C
[tex]E_2[/tex] = Final electric field
[tex]r_1[/tex] = Initial distance = 10 m
[tex]r_2[/tex] = Final distance = 20 cm
Electric field is given by
[tex]E=\sqrt{\dfrac{2P}{\pi r^2c\varepsilon_0}}[/tex]
So,
[tex]E\propto \dfrac{1}{r}[/tex]
[tex]\dfrac{E_2}{E_1}=\dfrac{r_1}{r_2}\\\Rightarrow E_2=E_1\dfrac{r_1}{r_2}\\\Rightarrow E_2=3.5\dfrac{10}{0.2}\\\Rightarrow E_2=175\ \text{N/C}[/tex]
The electric field amplitude at the required point is [tex]175\ \text{N/C}[/tex].
With what tension must a rope with length 2.90 m and mass 0.125 kg be stretched for transverse waves of frequency 42.0 Hz to have a wavelength of 0.740 m
Answers
Answer:
41.64 N
Explanation:
Applying,
v = √(T/m')................ Equation 1
Where v = velocity of the wave, T = Tension of the rope, m' = mass per unit length of the rope.
make T the subject of the equation,
T = v²m'................. Equation 2
But,
v = λf............... Equation 3
Where λ = wavelength, f = frequency
And
m' = m/L........... Equation 4
Where m = mass of the rope, L = length of the rope
Substitute equation 3 and equation 4 into equation 2
T = (λf)²(m/L).............. Equation 5
From the question,
Given: λ = 0.740 m, f = 42 Hz, m = 0.125 kg, L = 2.9 m
Substitute these values into equation 5
T = (42×0.74)²(0.125/2.9)
T = 41.64 N
Using a 2.5 meter long lever, we want to lift a body weighing 15 kilograms. If the lever support so that the pitch of the load is 55 cm, determine the force we must apply to be lift that burden? HURRYYYYY PLEASE ITS A TEST
Answers
Answer:
F = 668.9N
Explanation:
Using the formula;
m1d1 = m2d2
m1 and m2 are the masses
d1 and d2 are the distances
Substitute;
15 * 2.5 = x * (55/100) [55cm was converted to metres]
37.5 = 0.55x
Swap
0.55x = 37.5
x = 37.5/0.55
x = 68.18kg
Since F = mg
F = 68.18 * 9.81
F = 668.9N
This gives the required force
Moving current has electrical energy.
Answers
Could anyone help me on this question?
Answers
You really don't need any help on the question. It's all right there in the picture. What you need help with is the answer.
The number of times the same thing happens each second is called its "frequency". The frequency of the dragonfly's flaps is 477 Hz. (If you're close enough to the dragonfly, you can hear the wings flapping. It sounds like a raspy tone with a frequency of 477 Hz.)
The "period" is just the length of time it takes to happen once. That length of time is just (1 / frequency) .
The dragonfly flaps its wings once every (1 / 477 Hz) = 0.0021 second (C)
. A small car of mass m and a large car of mass 2m drive around a highway curve of radius R. Both cars travel at the same speed (v). The
centripetal acceleration (Grad) of the large car is the centripetal acceleration of the small car.
four times
twice
half
equal to
Answers
Complete question is;
A small car of mass m and a large car of mass 2m drive around a highway curve of radius R. Both cars travel at the same speed (v). The
centripetal acceleration (Grad) of the large car is the centripetal acceleration of the small car. How does the Force of the small car FS compare to the force of the large car FL as they round the curve.
four times
twice
half
equal to
Answer:
Half
Explanation:
Formula for centripetal force is given as;
F = mv²/R
Where;
v is velocity
R is radius
Now, centripetal acceleration is given by;
a = v²/R
Since they both travel with the same velocity V and radius remains the same, we can say that;
F = ma
For the small car;
FS = ma
For the big car;
FL = 2ma
This means the force of the small car is half of that of the Large car
Thus;
FS = ½FL
cellus
Find the x-component of this
vector:
92.5 m
32.0
Answers
Explanation:
x-component:
Vx = Vcos(theta)
= (92.5 m)cos(32.0)
= 78.4 m
Answer:
-78.4
Explanation:
For acellus students
A 0.413 kg block requires 1.09 N
of force to overcome static
friction. What is the coefficient
of static friction?
(No unit)
PLEASE HELP!
Answers
Answer:
static friction=0.126
1. Pam has a mass of 48.3 kg and she is at rest on
smooth, level, frictionless ice. Pam straps on
a rocket pack. The rocket supplies a constant
force for 27.3 m and Pam acquires a speed of
62 m/s.
What is the magnitude of the force?
Answer in units of N.
2. What is Pam’s final kinetic energy?
Answer in units of J.
3. A child and sled with a combined mass of 55.7
kg slide down a frictionless hill that is 11.3 m
high at an angle of 29 ◦
from horizontal.
The acceleration of gravity is 9.81 m/s
3. If the sled starts from rest, what is its speed
at the bottom of the hill?
Answer in units of m/s
Answers
Answer:
1. F = 3400 N = 3.4 KN
2. [tex]K.E_f=92832.6\ J = 92.83\ KJ[/tex]
3. v = 14.9 m/s
Explanation:
1.
First, we will calculate the acceleration of Pam by using the third equation of motion:
[tex]2as = v_f^2-v_i^2[/tex]
where,
a = acceleration = ?
s = distance = 27.3 m
vf = final speed = 62 m/s
vi = initial speed = 0 m/s
Therefore,
[tex]2a(27.3\ m) = (62\ m/s)^2-(0\ m/s)^2\\\\a = 70.4\ m/s^2[/tex]
Now, we will calculate the force by using Newton's Second Law of Motion:
F = ma
F = (48.3 kg)(70.4 m/s²)
F = 3400 N = 3.4 KN
2.
Final kinetic energy is given as:
[tex]K.E_f = \frac{1}{2}mv_f^2\\\\K.E_f = \frac{1}{2} (48.3\ kg)(62\ m/s)^2[/tex]
[tex]K.E_f=92832.6\ J = 92.83\ KJ[/tex]
3.
According to the law of conservation of energy:
[tex]Potential\ Energy\ at\ top = Kinetic\ Energy\ at\ bottom\\mgh = \frac{1}{2}mv_2 \\\\v = \sqrt{2gh}[/tex]
where,
v = speed at bottom = ?
g = acceleration due to gravity = 9.81 m/s²
h = height at top = 11.3 m
Therefore,
[tex]v = \sqrt{(2)(9.81\ m/s^2)(11.3\ m)}[/tex]
v = 14.9 m/s
David is driving a steady 30.0 m/s when he passes Tina, who is sitting in her car at rest. Tina begins to accelerate at a steady 2.10 m/s2 at the instant when David passes. Part A How far does Tina drive before passing David
Answers
Answer:
Explanation:
Let after time t , Tina catches up David .
Distance travelled by them are equal ,
Distance travelled by Tina
s = ut + 1/2 a t²
= .5 x 2.10 t²
= 1.05 t²
Distance travelled by David
= 30 t ( because of uniform velocity )
1.05 t² = 30t
t = 28.57 s
Distance travelled by Tina
= 1/2 a t²
= .5 x 2.10 x 28.57²
= 857 m approx.
Answer: [tex]857\ m[/tex]
Explanation:
Given
Speed of David car [tex]v=30\ m/s[/tex]
Tina begins to accelerate [tex]2.1\ m/s^2[/tex] after David pass the tina
Suppose it took t time for tina to catch David
Distance traveled by David in t time
[tex]\Rightarrow s_d=30\times t[/tex]
Using the equation of motion to get the distance of Tina is
[tex]s_t=ut+\dfrac{1}{2}at^2\\\\s_t=0+\dfrac{1}{2}\times 2.1t^2[/tex]
now, [tex]s_d=s_t[/tex]
[tex]30t=\dfrac{2.1}{2}t^2\\\\\Rightarrow 2.1t^2-60t=0\\\Rightarrow t(2.1t-60)=0\\\Rightarrow t=0,28.57\ s[/tex]
Neglecting [tex]t=0[/tex]
Distance traveled by tina in [tex]28.57\ s[/tex] is
[tex]s_t=\dfrac{1}{2}\times 2.1\times (28.57)^2\\\\s_t=857.057\approx 857\ m[/tex]
In an old Sesame Street skit, Kermit the Frog interviewed a local resident on the planet Koozebane, who measures time in gleeps and distance in glorps. One glorp is defined as the distance a rock will fall from rest in one gleep. How far will a rock fall from rest during the second gleep
Answers
Answer:
four glorps
Explanation:
We know :
[tex]$y=v_{0y}t + \frac{1}{2}a_yt^2$[/tex]
[tex]$\Rightarrow -1 \text{glorp} = 0 - \frac{g}{2} \times (1 g\text{ gleep})^2$[/tex]
[tex]$\Rightarrow 1 \text{ glorp}= \frac{g}{2} (1 \text{ gleep})^2$[/tex] .............(i)
Now, t' = 2 gleep
[tex]$y=v_{0y}t + \frac{1}{2}a_yt^2$[/tex]
[tex]$=0+ \frac{-g}{2} (2 \text{ gleep})^2$[/tex]
[tex]$=-\frac{4g}{2}(2 \text{ gleep})^2$[/tex]
[tex]$=4\left[\frac{-g}{2} (\text{gleep})^2\right]$[/tex]
= 4 (-1 gleep) (From (i))
So, |y| = 4 glorp
Copper wires are used as connecting wires because
(1 Point)
Copper has very high melting point
Copper wires are very thick wires
Copper wire offers a lower resistance
Copper wire has an attractive colour
Answers
[tex]\huge{ \mathfrak{ \underline{ Answer }\: \: ✓ }}[/tex]
Copper wires are used as connecting wires in circuits because they offer very less resistance.
__________________________________________________________
[tex]\mathrm{ ☠ \: TeeNForeveR \:☠ }[/tex]
Two long anti-parallel current-carrying wires carry currents of 20 A and 5.0 A. If the wires are separated by 20 cm. Find the magnitude of the magnetic field a point equally separated between both wires.
Answers
Answer:
5 x 10⁻⁵ T
Explanation:
Magnetic field at a point d distance away from a current carrying wire having current of I
B = 10⁻⁷ x 2I / d
Here magnetic field due to current of 20 A
B₁ = 10⁻⁷ x 2 x 20 / 10 x 10⁻²
= 4 x 10⁻⁵ T .
Here magnetic field due to current of 5 A
B₂ = 10⁻⁷ x 2 x 5 / 10 x 10⁻²
= 10⁻⁵ T .
These magnetic fields are acting in the same direction
Total magnetic field
B = B₁ + B₂
= 4 x 10⁻⁵ + 10⁻⁵ = 5 x 10⁻⁵ T .
Help me with this please
Answers
Answer:
yong may check po ayon yong sagot
g Monochromatic light with wavelength 633 nn passes through a narrow slit and a patternappears on a screen 6.0 m away. The distance on the screen between the centers of thefirst minima on either side of the screen is 32 mm. How wide (in mm) is the slit
Answers
Answer:
d = 1.19 x 10⁻⁴ m = 0.119 mm
Explanation:
This problem can be solved by using Young's double-slit experiment formula:
[tex]Y = \frac{\lambda L}{d}[/tex]
where,
Y = fringe spacing = 32 mm = 0.032 m
L = slit to screen distance = 6 m
λ = wavelength of light = 633 nm = 6.33 x 10⁻⁷ m
d = slit width = ?
Therefore,
[tex]0.032\ m = \frac{(6.33\ x\ 10^{-7}\ m)(6\ m)}{d}\\\\d = \frac{(6.33\ x\ 10^{-7}\ m)(6\ m)}{0.032\ m}[/tex]
d = 1.19 x 10⁻⁴ m = 0.119 mm
Convex lenses cause light rays to _____.
Answers
Answer:
to meet at a single point
(causing rays of light that are initially parallel to meet at a single point)
hope this helps:)
Explanation:
Answer:
focus
Explanation:
see more here
https://youtu.be/CJ6aB5ULqa0
Help me with this please
Answers
Answer:
check out of phase
Explanation:
this is my answer
Mass, volume and density are all properties of
Answers
Answer:
Properties of matter
Explanation:
All properties of matter are either extensive or intensive and either physical or chemical. Extensive properties, such as mass and volume, depend on the amount of matter that is being measured. Intensive properties, such as density and color, do not depend on the amount of matter.
Answer:
The pythagoream theorem
Explanation:
If a 4 Ohm resistor and a 12 Ohm resistor are connected in parallel, what is the total
resistance?
Answers
Rt = 3 ohms
Explanation:
Let R1 = 4-ohm resistor
R2 = 12-ohm resistor
For 2 resistors connected in parallel, the total resistance Rt is given by
1/Rt = 1/R1 + 1/R2
or
Rt = R1R2/(R1 + R2)
= (4 ohms)(12 ohms)/(4 ohms + 12 ohms)
= 48 ohms^2/16 ohms
= 3 ohms
The door is 2 m tall. How tall is it in inches? Note: There are 2.54 cm in 1 inch.
A. 78.7 in
B. 500 in
C. 787.4 in
D. 201.4 in
Answers
Answer:
Height of the door = 2m = 2000 cm
1 in = 2.54 cm
So 1 cm = 1/2.54 in
2000 cm = 200000/ 254
=
787.401574803
So no.c is correct
The door is 78.7 inch tall. Hence, option (A) is correct.
What is unit of length?Any arbitrarily selected and widely used reference standard for length measurement is referred to as a unit of length. The metric system, which is adopted by every nation on earth, is the most widely utilized in modern times.
The American customary units are also in use in the United States. In the UK and several other nations, British Imperial units are still used sometimes. There are SI units and non-SI units in the metric system.
Given that: the height of the door is = 2 meter
= 2*100 centimeter
= 200 centimeter.
There are 2.54 centimeter in 1 inch.
Hence, the height of the door is = 2 meter = 200 centimeter
= (200/2.54) inch
= 78.7 inch.
The door is 78.7 inch tall.
Learn more about length here:
https://brainly.com/question/17139363
#SPJ2
the caste system is an example of
Answers
Answer:
It is example of Closed system
24. A anvil with a mass of 60 kg falls from a height of 9.5 m. How fast is it going right
before it hits the ground?
V= I*R
V = voltage (measured in volts) V
I = current (measured in amperes) A
R = resistance (measured in Ohms) Ω
Answers
So they give us this
V=IR
V= 1.8
I=0.4
R=?
So we insert the thing that we know.
1.8=0.4*R
We need to leave our unknown value alone. So if our value of 0.4 is multiplying the unknown value it passes to the other side dividing.
So we have this.
Lastly we solve.
R=4.5ohms
The formula to find R is V=IR
V/I=R
So the resistance will be the Voltage divided by the Current
Problem 3:A starship voyages to a distant planet 10 ly away. The astronauts in the starship reach theplanet and then they immediately return to the Earth at the same speed. The round trip from the Earthto the planet and back to the Earth takes 25 years.(a) What is the speed of the starship
Answers
Answer:
speed = 0.8c
Explanation:
Given :
Distance from earth to the distant planet = 10 ly
Time taken by the astronauts for the entire journey = 25 years
The time taken to reach the planet is [tex]$t_1=\frac{25}{2}$[/tex]
= 12.5 years
Therefore, speed of the starship can be calculated by :
[tex]$\text{Speed} = \frac{\text{distance}}{\text{time}}$[/tex]
[tex]$v=\frac{10 \times c \times 3.15 \times 10^7}{12.5 \times 3.15 \times 10^7}$[/tex]
[tex]$=0.8c$[/tex]
Therefore the speed of the starship is 0.8c
If an electromagnetic wave has a frequency of 6×10^5 hz, what is its wavelength? what is its wavelength? A. 2 x 10^12m, B. 5 x 10^14m, C. 5 x 10^2m, 2 x 10^-3m
Answers
Answer:
5*10^2
Explanation:
A p e x