Answers
Related Questions
Both Arrhenius and Bronsted-Lowry defintions of an acid are similar. According to both of these definitions, an acid is a compound that -
donates a pair of electrons
contains a nonmetal anion
donates a hydrogen ion
should be labeled as corrosive
Answers
Answer:Donates a hydrogen ion
Explanation:
why do different people have differently shaped proteins?
Answers
The sequence of amino acids in the chain determines how the chain will fold up to make the protein, so different proteins have different three-dimensional shapes. ... This is because proteins form attachments and interact with many other molecules and structures inside organisms.
5 points
How many moles are in 3.5 L solution with a concentration of 2.5 M?
O 8.75 moles
O .71 moles
1.4 moles
Answers
What can we do to protect our oceans ?
Answers
1. Conserve Water
Use less water so excess runoff and wastewater will not flow into the ocean.
2. Reduce Pollutants
Choose nontoxic chemicals and dispose of herbicides, pesticides, and cleaning products properly.
3. Reduce Waste
Cut down on what you throw away.
Around Town
4. Shop Wisely
Choose sustainable seafood. Buy less plastic and bring a reusable bag.
5. Reduce Vehicle Pollution
Use fuel efficient vehicles, carpool or ride a bike.
6. Use Less Energy
Choose energy efficient light bulbs and don't overset your thermostat.
On the Water
7. Fish Responsibly
Follow "catch and release" practices and keep more fish alive.
8. Practice Safe Boating
Anchor in sandy areas far from coral and sea grasses. Adhere to "no wake" zones.
9. Respect Habitat
Healthy habitat and survival go hand in hand. Treat with care.
10. Anytime, Anywhere
Volunteer
Volunteer for cleanups at the beach and in your community. You can get involved in protecting your watershed too!
Hope this helps
What is concentration if pOH is 8?
A) 1 x 10-8 M
B) 1 x 102 M
C) 1 x 10-2M
D) 1 x 108 M
Answers
The answer is A) 1 x 10-8 M.
PLEASE ANSWER!! DUE TONIGHT!! 10 POINTS!!
Find the density of a cube (to the nearest tenth) with a side of 4 cm. and a mass of 1235 grams. (You do not need to include units in your answer.)
Answers
Answer:
19.3
Explanation:
V=4^3 a^3, to find volume with sides
p= 1235/64, Mass/ Volume= Density
H2O2 is what type of compound?
Answers
(This is rly for science but there’s no category for that) Which statement best describes how scientists and engineers work together
in the research and development cycle?
O A. Engineers come up with scientific questions when they are
developing their design, and scientists do research to answer
them.
O B. Scientists test designs made by engineers and then use the
results to improve the designs.
C. Scientists develop a new technology, and then engineers test it by
doing experiments.
D. Engineers make a scientific discovery, and then scientists perform
research to verify it.
Answers
Answer:
A. Engineers come up with scientific questions when they are developing their design, and scientists do research to answer them.
Define An Atom.
Ty!!!
Answers
=> the smallest particle of a chemical element that can exist.
-------☆ﾟ.･｡ﾟᵴɒƙυᴚᴀ_ƨȶäᴎ❀
what method is used to separate smoke particles from air
Answers
¿Qué estudia la química orgánica?
Answers
Answer: el estudio de la síntesis, estructura, reactividad y propiedades del diverso grupo de compuestos químicos construidos principalmente de carbono
Explanation:Hope I helped:)
subtracting atomic number from atomic mass will give the number of
Answers
Answer:
:)
Explanation:
If we subtract the atomic number from the atomic mass: atomic mass - atomic number = number of protons + number of neutrons - number of protons. Thus we get the number of neutrons present in an atom when we subtract the atomic number from the atomic mass.
Which type of changes are melting, freezing, and boiling?
Answers
Answer:
the changes are physical changes
I don't understand with the question number 4, does anybody understand how to do it?
Answers
Answer:
iodine = I
sodium= Na
oxygen= O2
aluminum = AI
nitrogen=N
sulfur= S
bromine =Br
magnesium =Mg
Which characteristics do stable ecosystems tend to have
Answers
Answer:
Ecosystems contain biotic or living, parts, as well as abiotic factors, or nonliving parts. Biotic factors include plants, animals, and other organisms. Abiotic factors include rocks, temperature, and humidity. Every factor in an ecosystem depends on every other factor, either directly or indirectly.
why does solid silver, Ag, conducts electricity while solid silver chloride, AgCl, does not.
Answers
Answer: A solid silver, Ag, conducts electricity because it contains ions or electrons while solid silver chloride, AgCl, does not conduct electricity because AgCl does not dissociate to give ions or electrons.
Explanation:
Solid silver (Ag) is considered to be a good conductor of electricity because there are more number of free electrons or movable atoms are present in it.
As electricity is the flow of ions or electrons. So, more is the number of ions or electrons present in a substance more will be its conductivity.
Whereas solid silver chloride is a precipitate that is insoluble in water and therefore, it will not give ions or electrons.
As a result, silver chloride is not able to conduct electricity.
a mieral is ______
a. man-made
b. alive
c. non-living
d. a plant
Answers
Answer:
C
Explanation:
A mineral is a composition of different rocks, therefore it is not alive and non livine. It is also not man made, but natural
why is Cu+O=2CuO unbalanced
Answers
Answer:
because the product of CuO contains 2 molecules so it is unbalanced
Explanation:
to balance it 2Cu+2O=4CuO now it is balanced
Scientist introducing a gene to the DNA of these fish that cause the fish to glow an example of which application of biotechnology?
A. Artificial selection
B. Genetic Engineering
C. cloning
D. Artificial intelligence
Answers
Answer:
The correct answer is B
Explanation:
Genetic engineering is an example of which application of because the genes are changed to get the desired features in an organism.
What is genetic engineering?Genetic engineering is the process in which we alter the genetic makeup of an organism to produce desired characterictics in that organism.
So we can conclude that Genetic engineering is an example of which application of because the genes are changed to get the desired features in an organism.
Learn more about here Genetic engineering: https://brainly.com/question/2780091
How many moles are in 2.8x10^24 atoms of silicon?
Answers
Answer:
4.6 mol Si
General Formulas and Concepts:
Atomic Structure
Reading a Periodic TableMolesAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisExplanation:
Step 1: Define
[Given] 2.8 × 10²⁴ atoms Si
[Solve] moles Si
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
[DA] Set up: [tex]\displaystyle 2.8 \cdot 10^{24} \ atoms \ Si(\frac{1 \ mol \ Si}{6.022 \cdot 10^{23} \ atoms \ Si})[/tex][DA] Divide [Cancel like units]: [tex]\displaystyle 4.64962 \ mol \ Si[/tex]Step 4: Check
Follow sig fig rules and round. We are given 2 sig figs.
4.64962 mol Si ≈ 4.6 mol Si
Calculate the number of moles found in 3.045x1024 atoms of helium.
PLS HELP
Answers
Explanation:
so for this u have to use this equation where
Moles = number of particle/6.02×10^23
= 3.045 × 10^24/6.02×10^23
= 5.0581
write it to 3 S.F so 5.06 moles
Consider the statement, “In a chemical reaction, atoms are neither created nor destroyed, only rearranged.” Why is this a statement of the law of conservation of mass?
Answers
Answer: The law of conservation of mass is reffering to the fact that energy cannot be created or destroyed. So when you speak about atoms not being created or destroyed it is the same thing. Unless you're talking about an atomic bomb where the atoms are split.
In a chemical reaction, the total mass present is equal to the mass of all the atoms undergoing the reaction.
According to the law of conservation of mass, mass is neither created nor destroyed but can be converted from one form to another. In a chemical reaction, atoms are rearranged. However, the total number of atoms in the system remains constant.
So, the total mass present in the system is equal to the mass of all the atoms undergoing the reaction. Since atoms are only rearranged, no new atom is formed and no atom disappears in the reaction, the total mass of the system remains constant.
For this reason, the statement; “In a chemical reaction, atoms are neither created nor destroyed, only rearranged" is a statement of the law of conservation of mass.
Learn more: https://brainly.com/question/13383562
To objects (A and B) of the same temperature are in contact with each other? Which statement is true.
A. Heat transfers from object A to object B, because molecules from a collide with those from B.
B. No heat transfers because there are no collisions between the molecules of the objects
C. Heat transfers from object B to object A, because molecules from B collide with those from A
D. Although the molecules collide, no heat transfers because there is no temperature difference between the objects
Answers
an organism that lives in or on another organism and causes harm to is a
A. host
B. parasite
C. prey
D. producer
Answers
the answer is B. Parasite.
How does increased exhalation of CO2 at the lungs (pulmonary regulation) restore the correct pH range?
Answers
Answer:
When CO2 levels become excessive, a condition known as acidosis occurs. This is defined as the pH of the
blood becoming less than 7.35. The body maintains the balance mainly by using bicarbonate ions in the
blood. As the body responds to neutralize this condition, an electrolyte imbalance – an increase of plasma
chloride, potassium, calcium and sodium, can occur.
In 2Fe+3Cl2=2FeCl3, how much iron (Fe) is needed to produce 4 moles of FeCl3?
In 2Fe+3Cl2=2FeCl3, how much FeCl3 is produced when 5 moles of Fe react in excess chlorine?
Answers
Answer:
4 mol Fe
5 mol FeCl₃
Explanation:
Step 1: Write the balanced equation
2 Fe + 3 Cl₂ ⇒ 2 FeCl₃
Step 2: Calculate how much iron (Fe) is needed to produce 4 moles of FeCl₃
According to the balanced equation, the molar ratio of Fe to FeCl₃ is 2:2.
4 mol FeCl₃ × 2 mol Fe/2 mol FeCl₃ = 4 mol Fe
Step 3: Calculate how much FeCl₃ is produced when 5 moles of Fe react in excess chlorine
According to the balanced equation, the molar ratio of Fe to FeCl₃ is 2:2.
5 mol Fe × 2 mol FeCl₃/2 mol Fe = 5 mol FeCl₃
2.3g of lithium chloride in 500cm3 of solution
Answers
Answer:
0.109M
Explanation:
Find molarity of the solution:
Molarity is defined as the ratio between the moles of the solute (Lithium Chloride in this case) per liter of solution. To solve this question we have to find the moles of LiCl and its volume as follows:
Moles LiCl -Molar mass: 42.394g/mol-
2.3g * (1mol / 42.394g) = 0.0543 moles
Volume in liters:
500cm³ * (1L / 1000cm³) = 0.500L
Molarity:
0.0543 moles / 0.500L =
0.109M
What is the acceleration of a 7 kg
mass being pulled by a 56 N force?
Answers
Answer:
8 meters per second per second
Explanation:
Newton's second law: [tex]f=ma[/tex], force = mass multiplied by acceleration.
Therefore 56 / 7 = acceleration = 8
Which of the following can be used to measure an object's
speed?
Answers
Answer:
distance traveled divided by the time it traveled
Explanation
this is just an equation for how to find speed. you can also just use like a meterstick and a stopwatch
If an atom has 8 electrons and 8 protons and 9 neutrons then what is it's net charge?"
choices:
0
1+
1-
2-