please help!!!
When a switch is turned from the off to the on position, it is changing the circuit in which of the following ways? O An open circuit is being changed into a closed circuit. A closed circuit is being changed into an open circuit. O A parallel circuit is being changed into a series circuit. A series circuit is being changed into a parallel circuit.​

Answer:

dgfggddhdbxbxjxddhsnsxnc

Answer:

The temperature of this newly discovered planet violates the third law of thermodynamic, there is a mistake in this value.

Explanation:

The third law of the Thermodynamic says:

At zero kelvin all molecular movement stops, which means that the entropy will be zero at this temperature.

So we can say there is no thermodynamic system that has temperature values less than 0 K.

The conclusion of the report will be.

The temperature of this new planet violates the third law of thermodynamic, there is a mistake in this value.

I hope it helps you!

Answer:

The answer is below

Explanation:

The resistance of a wire is directly proportional to the length of the wire and inversely proportional to its area. The resistance (R) is given by:

[tex]R=\frac{\rho L}{A}\\\\where\ L=length \ of\ wire,A=cross\ sectional\ area, \rho=resistivity\ of\ wire.[/tex]

Let us assume that all the wires have the same resistivity.

a) Wire of Length L and area A

[tex]R_1=\frac{\rho L}{A}[/tex]

b) Wire of Length 2L and area A

[tex]R_2=\frac{\rho *2L}{A}=2R_1[/tex]

C) Wire of Length L and area 2A

[tex]R_3=\frac{\rho L}{2A}=\frac{1}{2}R_1[/tex]

Therefore the wire of least resistance is R3 and R2 has the highest resistivity.

R₃ < R₁ < R₂

Therefore, the ranking of the wires from most current (least resistance) to least current (most resistance) is:

R₃ < R₁ < R₂

Visible and infrared light.

Answer:

4.8mph

Explanation:

Speed= Distance/time

Speed= 26.2/5.5

= 4.76mph

( To the nearest tenth ) = 4.8mph

Answer:

38.7 mph

Explanation:

I just add all the numbers together then divided them by 4, which is the amount of numbers you gave.

Answer:

It is a measure of the electric force per unit charge on a test charge.

Explanation:

The magnitude of the electric field is defined as the force per charge on the test charge.

Since we define electric field as the force per charge, it will have the units of  force divided by the unit of charge. This implies that the SI unit of electric field is given as Newton/Coulomb (N/C).

Because from the definition of the electric field intensity, it can be defined as force per unit charge. The correct answer is option D

Electric field is the region of space where electric force can be felt. It can also be expressed as electric field intensity E. Mathematically, it can be expressed as;

E = F/q or E = V/d

From the question, the statements that is true concerning the magnitude of the electric field at a point in space is " It is a measure of the electric force per unit charge on a test charge "

Because from the definition of the electric field intensity, is can be defined as force per unit charge.

Therefore, option D is the right answer.

Learn more about Electric Field here : https://brainly.com/question/14372859

Answer: false

Explanation:

Answer:

false

Explanation:

According to Newton's First Law of motion, an object remains in the same state of motion unless a resultant force acts on it.

Answer:

a. F = Qs/2ε₀[1 - z/√(z² + R²)] b.  h =  (1 - 2mgε₀/Qs)R/√[1 - (1 - 2mgε₀/Qs)²]

Explanation:

a. What is the magnitude of the net upward force on the sphere as a function of the height z above the disk?

The electric field due to a charged disk with surface charge density s and radius R at a distance z above the center of the disk is given by

E = s/2ε₀[1 - z/√(z² + R²)]

So, the net force on the small plastic sphere of mass M and charge Q is

F = QE

F = Qs/2ε₀[1 - z/√(z² + R²)]

b. At what height h does the sphere hover?

The sphere hovers at height z = h when the electric force equals the weight of the sphere.

So, F = mg

Qs/2ε₀[1 - z/√(z² + R²)] = mg

when z = h, we have

Qs/2ε₀[1 - h/√(h² + R²)] = mg

[1 - h/√(h² + R²)] = 2mgε₀/Qs

h/√(h² + R²) = 1 - 2mgε₀/Qs

squaring both sides, we have

[h/√(h² + R²)]² = (1 - 2mgε₀/Qs)²

h²/(h² + R²) = (1 - 2mgε₀/Qs)²

cross-multiplying, we have

h² = (1 - 2mgε₀/Qs)²(h² + R²)

expanding the bracket, we have

h² = (1 - 2mgε₀/Qs)²h² + (1 - 2mgε₀/Qs)²R²

collecting like terms, we have

h² - (1 - 2mgε₀/Qs)²h² = (1 - 2mgε₀/Qs)²R²

Factorizing, we have

[1 - (1 - 2mgε₀/Qs)²]h² = (1 - 2mgε₀/Qs)²R²

So, h² =  (1 - 2mgε₀/Qs)²R²/[1 - (1 - 2mgε₀/Qs)²]

taking square-root of both sides, we have

√h² =  √[(1 - 2mgε₀/Qs)²R²/[1 - (1 - 2mgε₀/Qs)²]]

h =  (1 - 2mgε₀/Qs)R/√[1 - (1 - 2mgε₀/Qs)²]

Answer:

1500N

Explanation:

Normal force = mg - F sin theta

constant velocity means acceleration = 0

F= ma = 150× 0 = 0N

thus;

normal force = mg = 150 × 10 = 1500N

Answer:

864N

Explanation:

Answer:

the power generation potential is 2.705 x 10⁶ J/s.

Explanation:

Given;

height below the free surface of a large water reservoir, h = 120 m

mass flow rate of the water, m' = 2300 kg/s

The power generation potential is calculated as;

[tex]Power = \frac{Energy}{time} = \frac{F\times h}{t} = \frac{(mg) \times h}{t} = \frac{m}{t}\times gh = m' \times gh\\\\Power = m' \times gh\\\\Power = 2300 \ kg/s \ \times \ 9.8 \ m/s^2 \ \times \ 120 \ m\\\\Power = 2.705 \times 10^6 \ J/s[/tex]

Therefore, the power generation potential is 2.705 x 10⁶ J/s.

Answer:

See explanation below

Explanation:

This is a typical exercise of free falling. In this case a rock thrown straight down from the bridge, and we are asked to determine the final velocity of the rock and it's displacement at those given times.

First, just for this problem, as the rock is going straight down, we'll say that the downward direction is positive, therefore, the following expressions to calculate velocity and speed will be:

V = V₀ + gt   (1)

X = V₀t + gt²/2   (2)

In this case, g = 9.8 m/s²

Now, let's see the displacement and velocity for each given time:

a) For  t = 0.5 s

V = 14 + (9.8)*0.5

V = 18.9 m/s

X = (14*0.5) + (9.8)(0.5)²/2

X = 7 + 1.225

X = 8.225 m

b) For t = 1.00 s

V = 14 + (9.8)*1

V = 23.8 m/s

X = (14*1) + (9.8)(1)²/2

X = 14 + 4.9

X = 18.9 m

c) For t = 1.5 s

V = 14 + (9.8)*1.5

V = 28.7 m/s

X = (14*1.5) + (9.8)(1.5)²/2

X = 21 + 11.025

X = 32.025 m

d) For t = 2 s

V = 14 + (9.8)*2

V = 33.6 m/s

X = (14*2) + (9.8)(2)²/2

X = 28 + 19.6

X = 47.6 m

e) For t = 2.50 s

V = 14 + (9.8)*2.5

V = 38.5 m/s

X = (14*2.5) + (9.8)(2.5)²/2

X = 35 + 30.625

X = 65.625 m

Hope this helps

Answer:

The answer is below

Explanation:

a) Coulomb's law of electric force for charges at rest states that Like charges repel each other while unlike charges attract one another.

Therefore since the microbes has small positive charges, the microbe would be repelled by the positively charged electrodes and attracted by the negative charged electrodes.

Hence, the microbes would collect on the negatively charged electrodes.

b) The microbes can easily removed from the negative electrode for analysis by discharging the electrode from the source. Thereby making the electrode to be incapable of attracting the microbe.

Answer:

Explanation:

The attraction weakens. Two objects that are farther apart are not drawn together as strongly as if they were close together.

Answer:

Explanation:

The acceleration up the incline is 1.00 m/s²

Net force acting on two masses = total mass x acceleration

= 350 x 1 = 350 N

weight acting down the plane = m g sinФ

= 350 x 9.8 x sin30 = 1715 N

Friction force acting down the plane = mg cosФ x μ where μ is coefficient of friction

= 350 x 9.8 x cos30 x .2 = 594N

Net force acting on total mass

= F - 1715 - 594 = 350 , where F is required force

F = 2659 N .

Answer: a. m = 7.7 kg

              b. V = 435.52 in³

              c. m = 1927 kg

              d. V = 335.37 cm³

              e. m = 3 kg

Explanation: Density is the ratio of mass per volume, i.e., it's the measure of an object's compactness. Its representation is the greek letter ρ.

The formula for density is

[tex]\rho=\frac{m}{V}[/tex]

Density's unit in SI is kg/m³, but it can assume lots of other units.

Some unit transformations necessary for the resolution of the question:

1 L = 1 dm³ = 1000 cm³

1 in³ = 16.3871 cm³

1 g = 0.001 kg

a. V = 1.34 L = 1340 cm³

[tex]\rho=\frac{m}{V}[/tex]

[tex]m=\rho.V[/tex]

m = 5.75 * 1340

m = 7705 g => 7.705 kg

Mass of object 1 with volume 1.34L is 7.7 kg.

b. A cube's volume is calculated as V = side³

V = 7.58³

V = 435.52 in³

Volume of object 2 is 435.52 in³.

c. Using 1 in³ = 16.3871 cm³ to change units:

V = 435.52 * 16.3871

V = 713689.4 cm³

Then, mass will be

[tex]m=\rho.V[/tex]

m = 2.7 * 713689.4

m = 1926961.4 g => 1927 kg

Mass of object 2 is 1927 kg.

d. Volume of a sphere is calculated as [tex]V=\frac{4}{3}.\pi.r^{3}[/tex]

Diameter is twice the radius, then r = 4.31 cm.

Volume is

[tex]V=\frac{4}{3}.\pi.(4.31)^{3}[/tex]

V = 335.37 cm³

Volume of object 3 is 335.37 cm³.

e. [tex]m=\rho.V[/tex]

m = 8.96 * 335.37

m = 3004.91 g => 3 kg

Mass of object 3 is 3 kg.

Answer:

x = 0.67 m

Explanation:

For this problem, let's use the projectile launch equations, as the jug goes through the bar, it comes out with horizontal speed vx = 1.3 m / s, which does not decrease as there is no friction.

Let's find the time or it takes to get to the floor

          y = y₀ + v_{oy} - ½ g t²

in this case I go = 0 and when I get to the floor y = 0

         0 = y₀ + 0 - ½ g t²

          t² = 2y₀ / g

          t² = 2 1.3 / 9.8 = 0.2653

          t = 0.515 s

now let's find the distance traveled in this time

         x = vx t

         x = 1.3  0.515

         x = 0.6696 m

         x = 0.67 m

Answer:

vegetables and legumes or beans

fruit

lean meats and poultry, fish, eggs, tofu, nuts and seeds, legumes or beans

grain (cereal) foods, mostly wholegrain or high cereal fibre varieties

milk, yoghurt, cheese or alternatives, mostly reduced fat.

Explanation:

Foods are grouped together because they provide similar amounts of key nutrients. For example, key nutrients of the milk, yoghurt, cheese and alternatives group include calcium and protein, while the fruit group is a good source of vitamins, especially vitamin C.

Answer:

Energy stored in an object due to its position is Potential Energy. · Energy that a moving object has due to its motion is Kinetic Energy.

Explanation:

Answer:

With or without.

Explanation:

According to the National Electrical Code (NEC), here the air conditioner disconnecting means is not within sight from the equipment, the provision for locking or adding a lock to the disconnecting means shall be on the switch or circuit breaker and remain in place with or without the lock installed. Thus, this is in accordance with section 110.25 of the National Electrical Code (NEC).

Answer: Similarity

By.

Answer:

a) t = 0.25 s,  b)  x = 0.075 m

Explanation:

a) For this exercise we will use kinematic relationships in one dimension

         v = v₀ + a t

in the problem they indicate the initial velocity v₀ = 0.15 m / s, the final velocity v = 0.45 m / s and the acceleration of the squid a = 1.2 m / s²

          t = [tex]\frac{v -v_o}{a}[/tex]

we calculate

         t = [tex]\frac{0.45 - 0.15}{1.2}[/tex]

         t = 0.25 s

b) We can also find the distance traveled during this acceleration

         v² = v₀² + 2a x

         x = [tex]\frac{v^2 -v_o^2 }{2a}[/tex]

let's calculate

         x = [tex]\frac{0.45^2 - 0.15^2 }{2 \ 1.2}[/tex]

         x = 0.075 m

Answer:

meteor

Explanation:

A asteroid stays still and a meteor goes fast

Answer:

meteor

Explanation:

or some people call it a shooting star

Answer:

Explanation:

Kinetic energy of the mass of 10 kg

= 1/2 m v² , m is mass and v is velocity .

= .5 x 10 x 20²

= 2000 J

The opposing force stops it . so work done by opposing force will be equal to this energy and it will be negative .

So energy transfer will be  - 2000 J .

= 2 kJ .

If distance travelled by mass is d , force 25 N will have a displacement of d . so work done by force of 25 N

= 25 x d

25 d = 2000

d = 80 m .

Hence system travels a distance of 80 m .

Answer:

Explanation:

The only force acting on the cart is a component of its weight parallel to ramp downwards . No other force acts parallel to the ramp .

Even when the cart is moving up after the initial push , its weight is acting downwards so acceleration is acting downwards .

When the cart is stationary at the top position , its weight is acting downwards so acceleration is downwards at that moment also . When the cart is going downwards , still its weight is acting down so acceleration is acting downwards .

After this push, as the car moves up the ramp, the direction of the acceleration of the cart is _down _______ the ramp. After the reaches its highest point, turns around, and begins moving down the ramp, the direction of the acceleration of the cart is _down ________ the ramp. At the highest point the cart reaches on the ramp, when the cart momentarily comes to rest, the magnitude of the acceleration of the cart is _downwards ______.

Answer:

c

Explanation:

Answer:

Rafi Bahalul

Explanation:

Israeli Haaretz newspaper reported Feb. 4 that Rafi Bahalul stumbled upon a 3,400-year-old Egyptian stone anchor engraved with hieroglyphs during a morning swim along Israel's northern shores last year.