Answer:
conduction, convection, and radiation
Explanation:
when you hold an ice cube, heat is transferred from your warm hand to the cold ice and melts it. Your hand feels cold because it is losing heat energy. There are three ways that heat can be transferred: by conduction, convection, and radiation. heat through solids.
PLZ HELP ME ASAP!!! 50 POINTS IF CORRECT! AND BRAINLEST
Answer:
B and C is the Answer
Follow me please
Mark brainliest
Gordo noted that the more airplanes he sold, the more money he made. This was:
directly proportional
inversely proportional
indirectly proportional
Answer:
Its indirectly Proportional
Explanation:
A object is placed between the focal point and the lens of a concave lens. Where will the image be formed?
Answer:
When object is placed between convex lens and focal point, image formed is virtual and magnified which is shown in the diagram. Was this answer helpful?
Which statements about braking a car are true?
The greater the kinetic energy of a car, the longer it takes for the car to stop.
The lower the kinetic energy of a car, the longer it takes for the car to stop.
If the speed of a car doubles, the car’s kinetic energy and braking distance quadruple.
If the speed of a car doubles, the car’s kinetic energy and braking distance remain the same.
Answer:
the first statement...
Answer:
The first answer is correct.
Plz mark brainliest.
Hope I helped.
Explanation:
A tiger leaps horizontally from a 6.5 m tall rock with a speed of 3.5 ms. How many seconds will it take for her to land?
Answer: 1.15 s
Explanation:
Given
Height of rock h=6.5 m
The horizontal speed of tiger u=3.5 m/s
In the vertical direction, there is no initial speed
Using the equation of motion
[tex]\Rightarrow h=ut+\frac{1}{2}at^2\\\\\Rightarrow 6.5=0+\frac{1}{2}\times 9.8\times t^2\\\\\Rightarrow t=\sqrt{\dfrac{13}{9.8}}=1.15\ s[/tex]
Time taken is 1.15 s
Excluding the noble gas group, how does the number of valence electrons in an element influence its chemical stability?
A. Elements with intermediate numbers of valence electrons are the last chemically stable.
B. Elements with the highest number of valence electrons are the most chemically stable.
C. Elements with intermediate number of valence electrons are the most chemically stable.
D. Elements wit the lowest number of valence electrons are the most chemically stable.
Answer:
C. Elements with intermediate number of valence electrons are the most chemically stable.
It takes 20 Newtons to move a box. How long will it take a 25 Watt motor to move this box 5 meters?
Answer:
With F = MA Its should take 500 Newtons
Explanation:
F = MA
A race car has a mass of 710kg. It starts from rest and speeds up to 12m/s in 12.0s. The car is uniformly accelerated during the entire time. What net force is applied to it?
Define Inertia.
___________✨
Answer:
a tendency to do nothing or to remain unchanged.
Explanation:
Answer:
Inertia: The resistance an object has to a change in its state of motion.
Explanation:
Hope it helps....
Have a great day!!
9- When the moon comes in an orbit higher from earth, ......... solar eclipse are formed.
a) total
b) annular
c) partial. d) annular and partial
e Which of the following particles that may be emitted in radioactive decay is not ionising?
A alpha
B beta minus
C neutron
D beta plus
Explanation:
C. neutron.
it does not contain ionizing characteristics.
hope it helps. :)
Define the unit of current. Name the device which is used to measure
electric current in a circuit.
Answer:
The ampere, symbol A, is the SI unit of electric current. It is defined by taking the fixed numerical value of the elementary charge e to be 1.602 176 634 x 10-19 when expressed in the unit C, which is equal to A s, where the second is defined in terms of ΔνCs.
the device used to measure current in a circuit is ammeter
A rocket with a mass of 0.5kg is travelling at 400m/s strikes and sticks in a block of wood with a mass of 50kg. find velocity of rocket.
Answer:
36.36 m/s
Explanation:
From the question,
Applying the law of conservation of momentum.
Total momentum before collision = Total momentum after collision .
mu+m'u' = V(m+m')................ Equation 1
Where m = mass of the rocket, m' = mass of the wood, u = initial velocity of the rock, u' = initial velocity of the wood, V = Final velocity after collision
But, the wood was initially at rest
Therefore, u' = 0 m/s
mu = V(m+m')
make V the subject of the equation
V = mu/(m+m')................. Equation 2
Given: m = 0.5 kg, u = 400 m/s, m' = 50 kg
Substitute these values into equation 2
V = (0.5×400)/(0.5+50)
V = 200/5.5
V = 36.36 m/s
Help me please I need to turn it in before midnight...
Answer:
The statement which explains how the total time spent in the air is affected as the projectile's angle of launch increases from 25 degrees to 50 degrees is;
C. Increasing the angle from 25° to 50° will increase the total time spent in the air
Explanation:
The equation that can be used to find the total time, T, spent in the air of a projectile is given as follows;
[tex]T = \dfrac{2 \cdot u \cdot sin(\theta) }{g}[/tex]
Where;
T = The time of flight of the projectile = The time spent in the air
u = The initial velocity of the projectile
θ = The angle of launch of the projectile
g = The acceleration due to gravity ≈ 9.81 m/s²
Given that sin(50°) > sin(25°), when the angle of launch, θ, is increased from 25 degrees to 50 degrees, we have;
Let T₁ represent the time spent in the air when the angle of launch is 25°, and let T₂ represent the time spent in the air when the angle of launch is 50°, we have;
[tex]T_1 = \dfrac{2 \cdot u \cdot sin(25^{\circ}) }{g}[/tex]
[tex]T_2 = \dfrac{2 \cdot u \cdot sin(50^{\circ}) }{g}[/tex]
sin(50°) > sin(25°), therefore, we have;
[tex]\dfrac{2 \cdot u \cdot sin(50^{\circ}) }{g} > \dfrac{2 \cdot u \cdot sin(25^{\circ}) }{g}[/tex]
Therefore;
T₂ > T₁
Therefore, increasing the angle at which the projectile is launched from 25° to 50° will increase the total time spent in the air.
a solid sphere of mass and radius 20kg and 4m is rotating with an angular velocity of 40rad/sec is accelerated uniformly to 60rad/sec in 2sec what is the torque acting on the sphere? (I=0•4MR^2)
Answer:
1280Nm
Explanation:
torque= I×alpha(angular acceleration)
so Angular acceleration is found by the following process.
10 Waves Question 2 of 10 A wave travels at a speed of 74 m/s. If the distance between crests is 12 m, what is the frequency of the wave? Use j A. 0.16 Hz B. 6.2 Hz C. 890 Hz D. 62 Hz SUBMIT
Answer: B 6.2 Hz
Explanation: Equation for waves v = λf.
Frequency = speed / wavelength f = v/λ
f = 74 m/s / 12 m = 6.166... Hz
Answer:
Rounding is necessary: the answer is 6.2 Hz
Explanation:
which is the best description of a soil sample with a pH of 4.5?
a. acidic
b. basic
c. inconclusive
d. neutral
Answer:
A. Acidic
Explanation:
I hope this helped!
Which of the following combinations would result in the least acceleration?
O SN and 0.35 kg
60N and 2.0 kg
O 12N and 1.0 kg
O IN and 0.20 kg
HELP!!
Differentiate between hertz and decibel.
Answer:
Explanation:Hertz is used to measure frequency, but decibel is used to measure intensity level.
Apply: The earth's gravity is pulling on you. Are you pulling on the earth? Explain your
reasoning.
Answer:
Yes, you are pulling on Earth. Reasoning. Third Newton's law of motion, action and reaction law, sates that for every action force, there is an equal (in magnitude) and opposite reaction force.
Explanation:
goo gle.
A wire of radius 5 x 10⁻⁴ m is needed to prepare a coil of resistance 40 Ω. The resistivity of the material of the wire is 3.14x10⁻⁷ Ωm. Calculate the length of the wire.
Answer:
100 m
Explanation:
From the question,
R = Lρ/A.................... Equation 1
Where R = resistance of the wire, L = length of the wire, ρ = resistivity of the wire, A = cross sectional area of the wire.
But,
A = πr².................... Equation 2
Where r = radius of the wire.
Substitute equation 2 into equation 1
R = Lρ/πr²
Make L the subject of the equation
L = Rπr²/ρ...................... Equation 3
Given: R = 40 Ω, r = 5×10⁻⁴ m, ρ = 3.14×10⁻⁷ Ωm
Constant: π = 3.14
Substitute these values into equation 3
L = [40×3.14×( 5×10⁻⁴)²]/ (3.14×10⁻⁷)
L = 40×3.14×25×10⁻⁸/(3.14×10⁻⁷)
L = 100 m
Hence the length of the wire is 100 m
Help me solve this please
Hey there!
Based on the info this planet is likely to be located near the sun. If you would like to be exact it would be between Mercury and Venus. This is because it’s orbital period is half a year, Venus is about 3/4 of a year, and Mercury is about 1/3 of a year. Hopefully this helps! Good luck!
Explain in detail why you cannot hear in space but you can see light(explanation includes particle movement of liquid, solids, gases, and plasma)
Answer:
The reason why one cannot hear in space but light can be seen is because light and sound are different kinds of wave
Light is an electromagnetic wave that propagates by a changing magnetic field hat creates a changing electric field. Light is created by a vibrating electric charge, and is transmitted through a medium by the absorption and reemission of the light by the medium particles
Sound is a longitudinal mechanical wave that is propagated by the vibration of the particles of the medium.
Sound requires a medium to propagate and it cannot be propagated or heard through space which is a vacuum.
Sound is created by a source that is vibrating and the vibration is transmitted to particles in the medium including solids, liquids, gases and plasma that the vibrating energy is in direct contact with and the transfer of the sound energy continues between layers of adjacent particles for the medium for the sound to be propagated from place to place
Explanation:
A lawn mower is pushed with a force of 79 N. If 11,099 J of work are done on mowing the lawn, what is the total distance the lawn mower was pushed? Round your answer to a whole number (no decimal places).
Answer:
141m
Explanation:
can someone help me :)
Answer:
mass= 60kg
velocity= 10m/s
momentum = mass × velocity
p=m×v
p= 60×10
p= 600kgm/s
A moving object has a kinetic energy of 150J and a momentum of 20.3kgxm/s find the speed of the object in m/s
Answer:
[tex]v = 14.78m/s[/tex]
Explanation:
Given
[tex]KE = 150J[/tex]
[tex]p = 20.3kgm/s[/tex]
Required
Determine the object's speed
Kinetic Energy is calculated as:
[tex]KE = \frac{1}{2}mv^2[/tex]
Make m the subject
[tex]m = \frac{2KE}{v^2}[/tex]
Momentum is calculated as:
[tex]p = mv[/tex]
Make m the subject
[tex]m = \frac{p}{v}[/tex]
So, we have:
[tex]m = \frac{p}{v}[/tex] and [tex]m = \frac{2KE}{v^2}[/tex]
Equate both expressions: [tex]m = m[/tex]
[tex]\frac{2KE}{v^2} = \frac{p}{v}[/tex]
Multiply both sides by v
[tex]v * \frac{2KE}{v^2} = \frac{p}{v}*v[/tex]
[tex]\frac{2KE}{v} = p[/tex]
Make v the subject
[tex]v = \frac{2KE}{p}[/tex]
Substitute [tex]KE = 150J[/tex] and [tex]p = 20.3kgm/s[/tex]
[tex]v = \frac{2 * 150}{20.3}[/tex]
[tex]v = \frac{300}{20.3}[/tex]
[tex]v = 14.78m/s[/tex]
1.what are barriers that you have encountered in dancing?
2.how do you think you can overcome them?
❤⭐❤⭐❤⭐❤
answer this ⭐
❤⭐❤⭐❤⭐❤
❤⭐❤⭐❤⭐❤
correct brainlies
wrong report
❤⭐❤⭐❤⭐❤⭐
thank you
❤⭐❤⭐❤⭐❤⭐
Answer:
heyy tell me ur yo u tube ch annel name I'll subscribe it and how many sub scriber u have friend
Explanation:
and are u from Ireland?
Wondering if you have enough rope to rappel to the ground, you drop a rock off the top, and hear the sound of it hitting the bottom 4.2 seconds later. Find the height of the cliff ignoring the time that the sound takes to travel back to you from the bottom.
Answer:
86.5 m
Explanation:
[tex]s = ut + \frac{1}{2} at {}^{2} \\ s = (0)(4.2) + \frac{1}{2} (9.81)(4.2) {}^{2} \\ s = 86.5m [/tex]
Answer:
86.5 m
Explanation:
A sound wave is propagating through the air from left to right as shown in the diagram below.
Answer:
Explanation: Pules
Answer: longitudinal (compression)
Explanation:
A + 32.2 μC charge feels a 0.544 N force from a + 12.3p μC charge. How far apart are they? (u stands for micro.) [?] m
Answer:
r = 2.55 m
Explanation:
Given that,
First charge, q₁ = 32.2 μC
Second charge, q₂ = + 12.3 μC
The force between charges, F = 0.544 N
We need to find the distance between charges. The force between two charges is given by the formula as follows :
[tex]F=k\dfrac{q_1q_2}{r^2}\\\\r=\sqrt{\dfrac{kq_1q_2}{F}} \\\\r=\sqrt{\dfrac{9\times 10^9\times 32.2\times 10^{-6}\times 12.3\times 10^{-6}}{0.544}} \\\\r=2.55\ m[/tex]
So, the charges are 2.55 m apart.
Answer:
2.55
Explanation:
Right on Acellus
Give the other guy brainliest
You can only give brainliest if 2 people answer