Please help, these questions are actually irritating me


**If the simple machine reduces the amount of force, what must be increased? (Think of using an inclined plane)**

A.) the speed of the input force


B.) the distance over which the force is applied


C.) the work the simple machine performs


D.) the size of the simple machine


**What is an input force?**

A.) the force a simple machine applies to an object


B.) the force a person applies to a simple machine


C.) the applied force on a system


D.) the net force on a system

**A pair of scissors is which category of lever?**

A.) 1st class


B.) 2nd class


C.) 3rd class


D.) 4th class

Answers

Answer 1

1.The distance over which the force is applied

2. The force a person applies to a simple machine

3. 1st Class


Related Questions

How do intermolecular forces (IF) and internal kinetic energy (KE) compare in gases?
IF = 0, KE is large
IF < KE
IF ≥ KE
IF > KE
Please help me!

Answers

Answer:

IF < KE

Explanation:

The kinetic energy of the gas is greater than the intermolecular forces making the molecules have room to move around without disruption. In a lot of gases, there are sometimes no intermolecular forces between all the particles.

Best of Luck!

(a) What is the electric field 4.00 m from the center of the terminal of a Van de Graaff with a 3.00 mC charge, noting that the field is equivalent to that of a point charge at the center of the terminal?
______ N/C
(b) At this distance, what force does the field exert on a 2.00C charge on the Van de Graaff's belt?
_____ N

Answers

Answer:

a)   E = 1.69 10⁶6 N / C,  b)  F = 3.38 10⁶ N

Explanation:

a)  In this exercise using Gauss's law we can consider the charge of the generator sphere as if it were at its center, therefore the electric field is

          E = k [tex]\frac{q}{r^2}[/tex]

let's calculate

         E = 9 10⁹ 3.00 10⁻³ / 4²2

         E = 1.6875 10⁶ N / C

 

          E = 1.69 10⁶6 N / C

b) let's calculate the electric force

          F = q E

          F = 2.00 1.69 10⁶

          F = 3.38 10⁶ N


A 1.3-kg book rests on a table. A downward force of 15 N is exerted on the top of the book by a hand pushing down on the
book
What is the net force on the book?

Answers

Answer:

The net force will be:

[tex] F_{net} = 142.53\: N[/tex]

Explanation:

The net force is given by:

[tex] F_{net} = W_{b}+F[/tex]

[tex] F_{net} = m_{b}g+15[/tex]

[tex] F_{net} = 142.53\: N[/tex]

I hope it helps you!

                 

How long must a 0.54-mm-diameter aluminum wire be to have a 0.42 A current when connected to the terminals of a 1.5 V flashlight battery

Answers

Answer:

L = 30.85 m

Explanation:

First, we calculate the resistance of the wire by using Ohm's Law:

V = IR

where,

V = Potential Difference = 1.5 V

I = Current = 0.42 A

R = Resistance of Wire = ?

Therefore,

[tex]R = \frac{1.5\ V}{0.42\ A}\\\\R = 3.57\ Ohms[/tex]

Now, the cross-sectional area of wire will be:

[tex]Area = A = \frac{\pi d^{2}}{4}\\\\A = \frac{\pi (0.00054\ m)^{2}}{4}\\\\A = 2.29\ x\ 10^{-7}\ m^{2}[/tex]

Now, the resistance of the wire is given as:

[tex]R = \frac{\rho L}{A}\\\\L = \frac{RA}{\rho}[/tex]

where,

L = Length of Wire = ?

ρ = resistivity of aluminum = 2.65×10⁻⁸ Ohm.m

Therefore,

[tex]L = \frac{(3.57\ Ohms)(2.29\ x\ 10^{-7}\ m^{2})}{2.65\ x\ 10^{-8}\ Ohm.m}[/tex]

L = 30.85 m

How is the chemical bonding within a molecule of carbon dioxide (CO2) different from the chemical bonding within a crystal of iron (Fe)?

A.
In an iron crystal, the atoms are joined by sharing electrons. In carbon dioxide, atoms of carbon and oxygen are held together by freely moving electrons.
B.
In a carbon dioxide molecule, atoms of carbon and oxygen are joined by sharing electrons. In an iron crystal, the atoms are held together by freely moving electrons.
C.
In an iron crystal, the atoms are joined by their opposite electrical charges. In carbon dioxide, atoms of carbon and oxygen are held together by freely moving electrons.
D.
In a carbon dioxide molecule, atoms of carbon and oxygen are joined by their opposite electrical charges. In an iron crystal, the atoms are held together by freely moving electrons.

Answers

Answer:

I'ts B

Explanation:

:p

The chemical bonding within a molecule of carbon dioxide (CO2) different from the chemical bonding within a crystal of iron (Fe) in a carbon dioxide molecule, atoms of carbon and oxygen are joined by sharing electrons. In an iron crystal, the atoms are held together by freely moving electrons. Therefore, option B is correct.

What is chemical bonding ?

The term chemical bonding is defined as the formation of a chemical bond between two or more atoms, molecules, or ions to form a chemical compound.

There are three main types of chemical bonding that are ionic bonding, covalent bonding, and metallic bonding.

The chemical bonding within a molecule of carbon dioxide (CO2) different from the chemical bonding within a crystal of iron (Fe) because in a carbon dioxide molecule, atoms of carbon and oxygen are joined by sharing electrons. In an iron crystal, the atoms are held together by freely moving electrons.

Thus, option B is correct.

To learn more about the chemical bonding, follow the link;

https://brainly.com/question/12907148

#SPJ2


A high frequency sound will have a ?

Answers

Answer:

The frequency of a sound wave is what your ear understands as pitch. A higher frequency sound has a higher pitch and the lower the period

Answer:

High-frequency sound waves produce high-pitched sounds, and low-frequency sound waves produce low-pitched sounds.

State the four factors the magnetic force moving in magnetic field depends on​

Answers

Explanation:

It depends upon the magnitude of the charge, the velocity of the particle and its strength .

liquids have higher coefficents of expansion than solids do in general. ture or false worth 29 points!

Answers

Answer:

true

Explanation:

HELP ASAP PLS ILL GIVE YOU BRAINLIEST
Select the correct answer.

Which civilization was the first to record a solar eclipse?

A.

Greek

B.

Chinese

C.

Aztec

D.

Polynesian

Answers

Answer:

chinese

Explanation:

Answer:

B chinese

hope this helps you

.) What will be the unit of time in that system in
which unit of length is m, unit of mass is kg and
unit of force is kg wt?
(a) [1/V(9.8) second (b) (9.8)2 second
(c) V(9.8) second
(d) 9.8 second​

Answers

Answer:

yes it is a great question. Thank you .

The manufacturer of a 9V dry-cell flashlight battery says that the battery will deliver 20 mA for 80 continuous hours. During that time the voltage will drop from 9 V to 6 V. Assume the drop in voltage is linear with time. How much energy does the battery deliver in this 80 h interval

Answers

Answer:

17280 J or 17.28 kJ

Explanation:

Given that the voltage drop,

U = U2 - U1

U = 9 - 6

U = 3V

Also, we're told that the current, I is equal to 20 mA with the discharge time, t being 80 hrs.

Converting the time from h oi urs to seconds, we have

t = 80 * 3600

t = 288000

Now, to find the energy needed, we're going to use the formula

w = pt, where p = U * I

p = 3 * 20*10^-3

p = 60*10^-3

w = 60*10^-3 * 288000

w = 17280 J or 17.28 kJ

Therefore, the total energy the battery delivers in the 80 hrs is 17.28 kJ

Which is the best description of biodiversity?
1. All animals in an ecosystem
2. The variety of the type of life within the biosphere
3. The study of life
3. The variety of plants on Earth

Answers

the variety of organisms on a given area. so i’d say #2. hope this is right

Answer:2

Explanation:

Help me please I wrote some but I am still stuck

Answers

Answer:

write something like after the spacecraft launched all of the potential energy transformed into kinetic energy causing the spacecraft to go at an abnormal spped.

Explanation:

all of the following elements will form ions by losing electrons except

aluminum
iron
sodium
oxygen

Answers

All form ions by losing electrons except oxygen.
Ok so iron aluminum and sodium never lose electrons because of the state of that “material” except oxygen because oxygen turns into carbon dioxide when exhaled so it’s oxygen

A 80 Kg monkey climbs a 15 meter tree in half a minute. What is the magnitude of power the monkey demonstrated?
a. 13.1 J/S
b. 392 J/S
c. 784 J/s
d. 11760 J/s​

Answers

Answer:

Power = Work / Time

P = m g h / t = 80 kg * 9.8 m/s^2 * 15 m / 39 s = 320 N m/ s = 392 J / s

= 392 Watts

The magnitude of power the monkey demonstrated is equal to 392 J/S.

Power calculation

To measure the power of a given body, one must relate its weight, the displacement performed and the time in which the movement was performed, in such a way:

                                              [tex]P = \frac{m\times g\times d}{t}[/tex]

Thus, applying the values ​​given by the statement we have:

                                          [tex]P = \frac{80 \times 9.8 \times 15}{30}[/tex]

                                           [tex]P = 392 J/s[/tex]

So, the power performed by the monkey climbing 15 meters is equal to 392J/s.

Learn more about power in: brainly.com/question/8671146

Consider the following three concentric systems two thick shells and a solid sphere all conductors The radii in the increasing order are a b c d and e The small sphere is given an excess charge of 3 C and the smaller shell is given an excess charge of 7 C The larger shell is electrically neutral The system quickly comes to electrostatic equilibrium state a Note that there are 5 conducting surfaces What are the electric charges values and signs on the each of them Are these charges distributed uniformly

Answers

Answer:

Explanation:

From the given question, the small sphere was provided with an excess charge of +3 C, while the smaller shell was given an excess of -7 C, it should be -7 C and not 7 C.

So, in light of that, to determine the electric charges values & signs on each of them, we have:

on a = +3 C

on b = -7 C

on c = -7 C

on d = +3 C

on e = -7 C

PLZ HELP IT URGENT
Describe what Rutherford would have seen in his gold foil experiment if J.J. Thompson's Plum Pudding model was completly accurate.

Answers

Answer: i use this in ss class

Explanation:

Find the moment of 300N force about B​

Answers

Answer:

300

Explanation Hope I'm not wrong.

g Consider a (12.5 A) cm long metal bar moving horizontally across a vertical magnetic field at a speed of (2.40 B) m/s. The magnetic field strength is 2.45 T. If the ends of the bar are connected to a (1.20 C) ohm resistor, find the power dissipated in the resistor while the bar is moving. Calculate the answer in watts (W) and rounded to three significant figures.

Answers

Answer:

Explanation:

emf   due to movement of a rod of length L in a perpendicular to magnetic field B with velocity v is given as

emf = BLv

Putting in the given values ,

E = 2.45 x 12.5 x 10⁻² x 2.4

= .735 V

This emf produces current in resistance . Power consumed by resistance

V² / R where R is resistance , V is emf induced .

Power = .735² / 1.2

= .45 W .

Consider a length of pipe bent into a U-shape. The inside diameter of the pipe is 0.5 m. Air enters one leg of the pipe at a mean velocity of 100 m/s and exits the other leg at the same magnitude of velocity, but moving in the opposite direction. The pressure of the flow at the inlet and exit is the ambient pressure of the surroundings. Calculate the magnitude and direction of the force exerted on the pipe by the airflow. The air density is 1.23 kg/m3 .

Answers

Answer:

The magnitude of the force exerted on the pipe by the air is 4830 N and it acts horizontally

Explanation:

Given the data in the question;

from the Newton's second law of motion;

F = ma

where m is the mass, a is acceleration and F is the force exerted on the pipe due to the airflow in it

now in terns of mass flow;

F = [tex]m^{"}[/tex]V

where [tex]m^{"}[/tex] is the mass flow rate, V is the velocity(

so

[tex]m^{"}[/tex] = pAV

[tex]m^{"}[/tex] = p × ([tex]\frac{\pi }{4}[/tex] d² ) × V

where d is the diameter of the pipe( 0.5 m)

p is the density( 1.23 kg/m³ )

velocity v is 100 m/s

so we substitute

[tex]m^{"}[/tex] = 1.23 × ([tex]\frac{\pi }{4}[/tex] (0.5)² ) × 100

[tex]m^{"}[/tex] = 30.75 × [tex]\frac{\pi }{4}[/tex]

[tex]m^{"}[/tex] = 24.15 kg/s

Now lets write the equation for the force exerted on the pipe by the airflow

F = [tex]m^{"}[/tex]( V₁ - V₂)

where V₁ is velocity at inlet ( 100 m/s )

V₂ is velocity at exit ( - 100 m/s )

so we substitute

F = 24.15 ( 100 - (-100))

F = 24.15 × 200

F = 4830 N

The pipe is symmetric about horizontal axis so the force should also b acting only in the horizontal direction since any force component in the vertical direction is nullified due to this symmetry

Therefore, The magnitude of the force exerted on the pipe by the air is 4830 N and it acts horizontally

A polycondensation reaction takes place between 1.2 moles of a dicarboxylic acid, 0.4 moles of glycerol (a triol) and 0.6 moles of ethylene glycol (a diol). A.Calculate the critical extents of reaction for gelation using (i) the statistical theory of Flory and (ii) the Carothers theory.B.Comment on the observation that the measured value of the critical extent of reaction is 0.866.

Answers

Answer:

A) i) using statistical theory of floxy

(Pa)c = 0.816

(Pb)c = 0.816

ii) using Carothers theory

( Pc ) = 0.917

B) To Obtain the measured value of critical extent of reaction ( 0.866) 1 mol of Glycerol  will react with 1 mol of dicarboxylic acid, but the same can not be applied to our obtained value because our stoichiometry is different

Explanation:

Given data :

Polycondensation reaction takes place between : 1.2 moles of dicarboxylic acid , 0.4 moles of glycerol and 0.6 moles of ethylene glycol

A) Calculate the critical extents of reaction for gelation

i) using statistical theory of floxy

(Pa)c = 0.816

(Pb)c = 0.816

ii) using Carothers theory

( Pc ) = 0.917

attached below is the detailed solution

B) To Obtain the measured value of critical extent of reaction ( 0.866) 1 mol of Glycerol  will react with 1 mol of dicarboxylic acid, but the same can not be applied to our obtained value because our stoichiometry is different

A 0.15kg baseball is pushed with a 100N force. What will its acceleration be?

Answers

100N is a force and the formula for a force is mass x acceleration. 0.15kg is a mass so you can write your equation like this 0.15 x acceleration = 100 and then acceleration= 100/0.15 = 666.6 m/s^2

g A particle is trapped in a 20 nm wide infinite potential well. What is the wavelength of the particle corresponding to n

Answers

Question:

A particle is trapped in a 20 nm wide infinite potential well. What is the wavelength of the particle corresponding to n = 7 in nm?

Answer:

[tex]\lambda_n = 5.71\ nm[/tex]

Explanation:

Given

[tex]L = 20nm[/tex] --- the width

[tex]n = 7[/tex]

Required

Determine the wavelength ([tex]\lambda[/tex])

This is calculated as:

[tex]\lambda_n = \frac{2L}{n}[/tex]

Substitute values for L and n

[tex]\lambda_n = \frac{2*20nm}{7}[/tex]

[tex]\lambda_n = \frac{40nm}{7}[/tex]

[tex]\lambda_n = \frac{40}{7}nm[/tex]

[tex]\lambda_n = 5.71428571\ nm[/tex]

[tex]\lambda_n = 5.71\ nm[/tex] --- approximated to 3 significant figures

A monk is sitting atop a mountain in complete rest in meditation. What is the Kinetic
Energy of the monk? (assume mass of 65 kg and the mountain's height was 1000 m)
4,225,000
No Kinetic Energy - because there is no movement
637,000
65.000

Answers

Answer:

No kinetic energy-because there is no movement

Explanation:

It states that the monk is at complete rest so there is no movement.

A spring with a spring constant of 80 N/m is at rest and is attached to a block. If the block (attached to the end of the spring) is moved from 0.6 m to 0.4 m and then let go, what will be the spring force exerted on the block? Rightward is positive.

Answers

Answer:

–I6 N

Explanation:

From the question given above, the following data were obtained:

Spring constant (K) = 80 N/m

Initial position = 0.6 m

Final position = 0.4 m

Force (F) =?

Next, we shall determine the compression of the spring. This can be obtained as follow:

Initial position = 0.6 m

Final position = 0.4 m

Compression (x) =?

Compression = Final position – Initial position

Compression (x) = 0.4 – 0.6

Compression (x) = – 0.2 m

Finally, we shall determine the force. This can be obtained as follow:

Spring constant (K) = 80 N/m

Compression (x) = – 0.2 m

Force (F) =?

F = Kx

F = 80 × –0.2

F = –I6 N

Which one of the following is an example of an acid-base reaction?

Answers

Answer:

B

Explanation:

Acid reacts with base to give salt and water.

HCL - Acid

Mg(OH)2 - Base

H2O - Water

MgCl2 - Salt

Answer: B because A p e x

Explanation:

An uncharged capacitor and a resistor are connected in series with a switch and a 12 V battery. At the instant the switch is closed, the voltage across the resistor is

Answers

Answer:

V = 12 V

Explanation:

Since a capacitor can't change the voltage between its plates  instantaneously, this means that just after the switch is closed, the voltage through the capacitor is zero.So, the current that flows in this moment is the same that would flow in a series circuit with only one resistor connected to the battery.Applying KVL to the circuit (neglecting the presence of the capacitor which can be replaced by a short circuit just after closing the switch), the voltage through the resistor must be equal to the one of the battery, i.e., 12 V.

How long will it take a 200kg stationary man in space to travel 20m if he throws a 10 kg object at a velocity of 30m/s?

Answers

well honestly I just learned this today actually but you need to divide the Distance and speed and weight to figure out the time to reach the distance, well your welcome :)

How far can you get away from your little
brother with the squirt gun filled with
paint if you can travel at 3 m/s and you
have 15s before he sees you?
Know
Find
Equation
Solve

Answers

spray him in the eyes and you have until he washes it put

Friction occurs when microscopic hills and valleys stick together

true or false

Answers

Answer:

true

Explanation:

Friction occurs because no surface is perfectly smooth. Rougher surfaces have more friction between them. Heavier objects also have more friction because they press together with greater force. Friction produces heat because it causes the molecules on rubbing surfaces to move faster and have more energy.

Explanation:

true but not going to copy and paste,

Other Questions
An isosceles triangle (2 sides are equal) has a base of 5 cm and legs "x" cm long. The perimeter is no more than 30 cm. Write an inequality to find the possible values of x. 10/1211.You drive the 10 miles to the mall at an average speed of 40 mph. Onthe way home, you hit severe traffic and had to drive at an averagespeed of 10 mph. What is your average speed for the trip? What medical term means Sample of the drainage that was grown in the lab to identify the microorganism and determine the best antibiotic Find the length of the third side. If necessary, write in simplest radical form The purpose of the newsreel was to convince the American public that the US Army was ready for war. Whatevidence from the video supports this conclusion? Check all that apply.the use of patriotic musicinterviews with military leadersthe title Uncle Sam's Own "Blitz"statistics on military preparednessthe demonstration of new equipmentfootage of American soldiers in action Explain the difference between objects that are sources of light and objects that reflect light Solve for x.-5/6x-1/9x=-102x = ______? How does medical apartheid affect society today? True or false: By the time he left office, Solon had become the most beloved leader in thehistory of Athens. Can someone please explain how to simplify expressions that have negative and positive exponents please answer me its math question! When kci dissolved in ethanol what is the intermolecular attraction between k+ ions and ethanol molecules NEED HELP PLEASE I ONLY HAVE 3 MINUTES LEFT WILL GIVE BRAINLIEST PLS HELPExplain the Angle Theorems and solve out the following the applications: I'm just learning about this help please794.561 x 10 2 A battery connected to two wires in parallel. Both wires are made of the same material and are of the same length, but the diameter of wire A is twice the diameter of wire B.True or False for the following:1) The resistance of wire B is four times as large as the resistance of wire A.2) The power dissipated in wire A is 16 times the power dissipated in wire B.3) The voltage drop across wire B is larger than the voltage drop across wire A.4) The resistance of wire B is twice as large as the resistance of wire A.5) The current through the battery is five times larger than the current through wire B. Instructions:Emotet is an advanced banking Trojan that primarily functions as a downloader of other Trojans. According to the Symantec Internet security threat report, Emotet first emerged in 2014 and, after a quiet period, reappeared to make waves in the second half of 2017. Emotet again made headline news when it was used in more attacks in late 2019. In this activity, you will do some research and answer the following questions about Emotet.Note:Include references to support each of your answers, such as the book, news article, or website you collected the information from. Only answers with references will receive points.1.[10 points] Explain how the malware spread itself. In particular, do you think its spreading mechanism is like a worm or a virus? Justify your answer. (4-6 sentences)2.[10 points ] Explain the concealment mechanisms employed by Emotet. (3-6 sentences)3.[10 points ] Explain how Emotet communicates with a command and control (C&C) server? (4-6 sentences) find the sum of the 2 terms of an A P are in the ratio of (2n-1):(2n+1) then find the ratio of their 10th term Why is the Supreme Court described asthe court of law? 1. In what ways did Greeks in different city-statesovercome the lack of farmland? which number is an integer? 6 4.2 3/4 5 1/2