The frequency of oscillation of a mass on a spring is given by the equation:
[tex]f = 1 / (2π) * sqrt(k / m)[/tex]
[tex]k = (1 / (2π)^2 ) * (0.1^2) * 10 kg[/tex]
[tex]k = 0.158 N/m[/tex]
The spring constant of the spring is 0.158 N/m.
What is a spring constant?The spring constant, also known as the spring rate or rate constant, is a measure of the stiffness of a spring. It represents the amount of force (in newtons) required to compress or stretch a spring a certain distance (in meters) from its equilibrium position. The spring constant is a proportionality constant that relates the force applied to a spring to the resulting displacement.
The spring constant is an important property of a spring because it determines how much force is required to compress or stretch the spring a certain distance. A spring with a higher spring constant will be stiffer, and will require more force to compress or stretch it a certain distance, while a spring with a lower spring constant will be more flexible and will require less force to compress or stretch it a similar distance.
It is represented by the letter 'k', the unit of spring constant is N/m (Newton per meter). The greater the spring constant, the stiffer the spring is, and the less it will deflect for a given force.
Learn more about spring constant, here:
https://brainly.com/question/14159361
#SPJ1
That other answer is untrustworthy. It's probably a POS troll.
The real answer: 4 N/m
how are characteristics of electromagnetic waves affected by medium
Hello,
QUESTION)Light is an electromagnetic wave, its speed is maximum in space and almost in the air where interactions have almost no effect. In other non-opaque media, light is subject to several phenomena: refraction and reflection. Part of the incident ray will be reflected in the same medium while the other part will be refracted in the new medium with a lower speed. In general, the medium influences the speed, and therefore the wavelength.
A cart moves with negligible friction or air resistance along a roller coaster track. The cart starts from rest at the top of a hill of unknown height. It then goes down that first hill and up another circularly shaped hill of height 10 meters and radius 15 meters. The ride is designed so that the cart just barely loses contact with the track at the top of the second hill (10 meters above ground level). What is the height of the starting hill relative to ground
Answer:
hinit = 17.5 m
Explanation:
Assuming no friction present, the mechanical energy must be conserved, which means that at any point of the trajectory, the sum of the gravitational potential energy and the kinetic energy must keep the same.At the top of the hill, since it starts from rest, all the energy must be potential, and we can express it as follows:[tex]E_{o} = U_{o} = m*g*h_{init} (1)[/tex]
When the car arrives to the top of the second hill, as we know that it is lower than the first one, the energy of the car, must be part gravitational potential energy, and part kinetic energy.We can express this final energy as follows:[tex]E_{f} = U_{f} + K_{f} = m*g* h_{2} + \frac{1}{2} *m*v_{f} ^{2} (2)[/tex]
In order to find hinit, we need to make (1) equal to (2), and solve for it.In (2) we have the value of h₂ (10 m), but we still need the value of the speed at the top of the second hill, vf.Now, when the car is at the top of the hill, there are two forces acting on it, in opposite directions: the normal force (upward) and the weight (downward).We know also that there is a force that keeps the car along the circular track, which is the centripetal force.This force is just the net downward force acting on the car (it's vertical at the top), and is just the difference between the weight and the normal force.If the cart just barely loses contact with the track at the top of the second hill, this means that at that point the normal force becomes zero.So, the centripetal force must be equal to the weight.The centripetal force can be expressed as follows:[tex]F_{c} = m*\frac{v_{f} ^{2}}{R} (3)[/tex]
We have just said that (3) must be equal to the weight:[tex]F_{c} = m*\frac{v_{f} ^{2}}{R} = m*g (4)[/tex]
Simplifying, and rearranging, we can solve for vf², as follows:[tex]v_{f}^{2} = R*g (5)[/tex]
Replacing (5) in (2), simplifying and rearranging in (1) and (2) we finally have:[tex]h_{init} = h_{2} + \frac{1}{2} R = 10m + 7.5 m = 17.5 m (6)[/tex]
Please help
The period of an oscillation is measured to be 0.0833 seconds. What is
the frequency of this oscillation? *
1.0833 Hz
0.287 Hz
9.8 Hz
12 Hz
0.007 Hz
Answer:
your
answer is
12.004
The statement "If a plant receives fertilizer,
then it will grow to be bigger than a plant
that does not receive fertilizer" is an
example of
A. an observation.
B. a hypothesis.
C. a theory.
Find the velocity of a dolphin that swims 55 m in 5.0 s.
Answer: 11 m/s
Explanation: velocity = distance /time = 55 m /5.0 s
Answer:40km/h
Explanation:
a box is slides down a slope
Answer:
120 N
Explanation:
From the question given above, the following data were obtained:
Angle (θ) = 35°
Mass (m) = 15 Kg
Acceleration due to gravity (g) = 9.8 m/s²
Normal force (N) =?
The normal force acting on the object can be obtained as:
N = mg × Cosθ
N = 15 × 9.8 × Cos 35
N= 147 × 0.8192
N = 120 N
Therefore, the normal force acting on the object is 120 N
Please please help I'm stuck!!!
Answer: iDc im in 3grade
Explanation:sorry
PLEASE HELP ME WITH ONE QUESTION
If 1000 J of heat energy is lost from a piece of hot metal which is placed into a cup of cool water, how much energy is gained by the water?
Answer:
1000J
Explanation:
According to the law of calorimetry;
Heat lost by cold substance = Heat gained by hot substance
If 1000 J of heat energy is lost from a piece of hot metal,
heat lost by hot substance = 1000J
Since we are to determine how much energy is gained by the water, using the law
Heat lost by hot metal = heat gained by the water
Hence heat gained by the water = 1000J
A human body consists of
Answer:
60% of the human adult body is water. According to H.H. Mitchell, Journal of Biological Chemistry 158, the brain and heart are composed of 73% water, and the lungs are about 83% water. The skin contains 64% water, muscles and kidneys are 79%, and even the bones are watery: 31%.
Explanation:
The amount of sliding friction depends on the
a. weight of the moving object and the type of surface that the
object slides across.
b. density and volume of the object.
c. acceleration and mass of the object.
d. density and mass of the object.
*help please
Answer:
c I think so do u know the formula for friction??friction? lkke kinetic friction
A uniform 140 g rod with length 57 cm rotates in a horizontal plane about a fixed, vertical, frictionless pin through its center. Two small 30 g beads are mounted on the rod such that they are able to slide without friction along its length. Initially the beads are held by catches at positions 11 cm on each sides of the center, at which time the system rotates at an angular speed of 23 rad/s. Suddenly, the catches are released and the small beads slide outward along the rod. Find the angular speed of the system at the instant the beads reach the ends of the rod. Answer in units of rad/s.
Answer:
The correct answer is "12 rad/s"
Explanation:
The given values are,
Mass of rod,
M = 140 g
i.e.,
= 0.14 kg
Length,
L = 57 cm
i.e.,
= 0.57 m
Mass of beads,
M = 30 g
i.e.,
= 0.03 kg
Angular speed,
r = 11 cm
i.e.,
= 0.11 m
Now,
The inertia of rods will be:
= [tex]\frac{1}{12}ML ^2[/tex]
On substituting the values, we get
= [tex]\frac{1}{12}\times 0.14\times (0.57)^2[/tex]
= [tex]0.0037905 \ kg-m^2[/tex]
The inertia of beads will be:
= [tex]mr^2[/tex]
On substituting the values, we get
= [tex]0.03\times (0.11)^2[/tex]
= [tex]0.000726 \ kg-m^2[/tex]
The total inertia will be:
= [tex]Inertia \ of \ rods+Inertia \ of \ beads[/tex]
= [tex]0.0037905 + 0.000726[/tex]
= [tex]0.0045165 \ kg-m^2[/tex]
now,
The angular speed of the system will be:
⇒ [tex]L_1w_1=L_2w_2[/tex]
On substituting the values in the above equation, we get
⇒ [tex]0.0045165\times 23 = (0.0037905 + (0.03\times 0.285^2)\times 2 )\times w_2[/tex]
⇒ [tex]0.1038795 = 0.0037905 + (0.00243675\times 2 )\times w_2[/tex]
⇒ [tex]w_2 = 12 \ rad/s[/tex]
Charging by Contact examples
Answer:
the hair and the comb are both neutral
who compose the Ghana national anthem
Answer:
Philip Gbeho
Explanation:
1. Only about
% of water on Earth is fresh water that is readily available for human consumption.
a. less than 1
b. 5
c. more than 50
d. All water on Earth is fresh water and is easily accessible.
Answer:
Hey mate.....
Explanation:
This is ur answer....
a. Less than 1%3% of the earth's water is fresh. 2.5% of the earth's fresh water is unavailable: locked up in glaciers, polar ice caps, atmosphere, and soil; highly polluted; or lies too far under the earth's surface to be extracted at an affordable cost. 0.5% of the earth's water is available fresh water....
Hope it helps you,
Mark me brainliest plz....
Follow me! :D
Question:
1. Only about % of water on Earth is fresh water that is readily available for human consumption.
a. less than 1
b. 5
c. more than 50
d. All water on Earth is fresh water and is easily accessible
Answer:
a. less than 1
help, it's an emergency !!!!!!!
An elevator motor in a high-rise building can do 3500 kJ of work in 5 min. Find the power developed by the motor. Explain if you can plz
Answer:
P = 11666.6 W
Explanation:
Given that,
Work done by the motor, W = 3500 kJ
Time, t = 5 min = 300 s
We need to find the power developed by the motor. Power developed is given by :
[tex]P=\dfrac{E}{t}\\\\P=\dfrac{3500\times 10^3}{300}\\\\P=11666.7\ W[/tex]
So, the required power is 11666.6 W.
A projectile is thrown with a velocity of 40 m/s, 45 degrees above the +x-axis. Determine its initial x-velocity and its initial y-velocity.
x-component is V·cos(angle)
y-component is V·sin(angle)
When the angle is 45°, its sin and cos are both 1/2·√2 .
Vx = 20·√2 = 28.28 m/s
Vy = 20·√2 = 28.28 m/s
Three 5 Ohm resistors are connected in parallel to a 9 Volt power supply. What is the current through each resistor?
Answer:
I₁ = I₂ = I₃ = 12 A
Explanation:
Since the resistors are connected in parallel across a battery. Hence, the voltage across each of them will be the same, which will be equal to the voltage of the power supply. Since each resistor has the same resistance of 5 Ω. Therefore. the current across each resistor will also be the same. We can easily calculate these current values by the use of Ohm's Law, as follows:
[tex]V = IR\\I_{1}=I_{2}=I_{3}=\frac{V}{R} \\\\I_{1}=I_{2}=I_{3}=\frac{9\ Volt}{5 \Omega}\\\\[/tex]
I₁ = I₂ = I₃ = 12 A
given that two vectors A=i,2j-2k and B=6i+3j+2k find A +B
Answer:
7i, 5j, 0k
Explanation:
Add up the two vectors.
Add
i+i 1+6 = 7i
j+j 2+3 = 5j
k+k -2+2 = 0k
therefore A+B = (7i, 5j, 0k)
Gaseous sulfur dioxide is a compound that combines with water in the atmosphere to form acid rain. What is the primary source of sulfur dioxide?
O volcanic emissions
O combustion of fossil fuels
O destruction of tropical forests
O mining and mineral extraction
Which types of reactions are also redox reactions?
Answer:
Your ans is B)
Explanation:
Hope its right
if wrong firgive me
PLZ HELP PLZ ILL GIVE BRAINLIEST TO BEST ANSWERED
The Earth's gravity pulling on a skydiver: Contact or Non Contact
Friction from a car's brakes causing it to stop: Contact or Non Contact
The repulsive magnetic force between the north poles of two magnets: Contact or Non Contact
The attractive electrostatic force between an electrically charged balloon and a wall: Contact or Non Contact
Answer:
1.Contact because its a contact force
2 Contact because when the car is stopping it is coming in to contact with the ground.
3 non Contact because magnets don't need to have contact they pull
4 non Contact because its not a contact force
Two resistors R1 = 3 Ω and R2 = 6 Ω are connected in parallel. What is the net resistance in the circuit?
Answer:
2ohms
Explanation:
the net resistance is given by
1/R=1/R1 +1/R2,we are supposed to find R
thus by making R the subject ....
R=R1•R2/R1+R2
R=3•6/3+6
R=18/9 =2Ohms
Which of the following is a conductor?
copper
water
aluminum
all of the above
Answer:
D all of the above
Explanation:
electricity moves easily through all of them and none of them prevent the flow of electricity
1. Why is the flow of electrons from A to B?
2. What's the difference between flow of current & flow of electrons and why ar they opposite?
1. because A is more negative than B. A is -1000 V (we can imagine that A has excess 1000 electrons), in other, B which +3000 V can be assume that B need 3000 elctrons to be neutral. So, the electron will flow from A to B.
2. Electrons being negatively charged flow from the negative terminal to the positive terminal of the voltage source. So, the actual direction of current should be from negative to positive terminal. However, the conventional direction had already been established. So, the current flow is considered in the direction opposite to the direction of flow of electrons. (from topperlearning dot com)
How to calculate the voltage of a light bulb
The microwaves produced inside a microwave have a wavelength of 12.0m and a frequency of 25Hz. At what speed do the microwaves travel in units of m/s ?
Answer: 300 m/s
Explanation:
The equation for finding wave speed is the wavelength times the frequency which would be
12.0mx 25hz=300m/s
Chromosomes _____.
carry thousands of genes
can be analyzed in a karyotype
always occur in pairs
are tight coils of DNA
are carried on genes
Answer:
The correct answer for this would be D.
Explanation:
Are tight coils of DNA
Energy is radiated or transmitted in the form of rays or waves or particles.
B. radiation
C. convection
D. conduction
Answer:
B radiation
Explanation:
every type of transmitted waves are radioactive in a way.
An electric motor supplies 2,500 Watts of power in a 220 V circuit. What is the resistance of the motor? Be sure to include the proper units in your answer. Remember... Ω is the unit for Resistance.
Answer:
R = 19.36 ohms
Explanation:
Given that,
The power of an electric motor, P = 2500 Watts
The voltage of the circuit, V = 220 V
We need to find the resistance of the motor. We can find it as follows :
[tex]P=\dfrac{V^2}{R}\\\\R=\dfrac{V^2}{P}\\\\R=\dfrac{(220)^2}{2500}\\R=19.36\ \Omega[/tex]
So, the resistance of the motor is 19.36 ohms.