A venti latte (502mL) contains 0.322g caffeine, C8H10N4O2, express this concentration in molarity.
Answer:
0.00331M
Explanation:
Molarity of a solution can be calculated as follows:
Molarity = number of moles (n) ÷ volume (V)
In the information provided in this question, the volume = 502mL = 502/1000 = 0.502L, mass of caffeine = 0.322g
Molar mass of caffeine (C8H10N4O2), where C = 12, H = 1, N = 14, O = 16 is as follows:
Molar mass = 12(8) + 1(10) + 14(4) + 16(2)
= 96 + 10 + 56 + 32
= 194g/mol
Using, moles = mass/molar mass
moles = 0.322/194
moles = 1.66 × 10-³ moles
mole = 0.00166mol
Molarity = number of moles ÷ volume
Molarity = 0.00166mol ÷ 0.502L
Molarity = 0.00331M.
Using this illustration, what is the chemical formula? Picture and possible answers are below.
The answer is It is NH3.....
How many different elements are involved in the reaction shown below?
2Fe + 6HC2H3O2 → 2Fe(C2H3O2)3 + 3H2
There are four. Fe, H, C, and O
Explain why NH3 has a higher solubility in water than SbHz.
Answer: NH3 has a higher solubility rate than SbH3 because it has much stronger bonds. ... HoCH2CH2OH because it can form two bonds with water compared to the other molecule which can only form one.
HOPE THIS HELPS
The reactant which is consumed completely in a reaction is called the excess reactant. TRUE or FALSE
Answer:
False
Please rate brainliest
A gas occupies 10.2 L at 0.986 atm. What is the pressure if the volume increases to 16.0 L?
Answer:
0.629 atm
Explanation:
P1V1 = P2V2
P1 = 0.986 atm
V1 = 10.2 L
P2 = ?
V2 = 16.0 L
Solve for P2 --> P2 = P1V1/V2
P2 = (0.986 atm)(10.2 L) / (16.0 L) = 0.629 atm
Argon has a pressure of 34.6 atm. It is transferred to a new tank with a volume of 456 L and pressure of 2.94 atm. What was the volume of the original container?
Answer:
38.75 L
Explanation:
From the question,
Applying Boyles Law,
PV = P'V'....................... Equation 1
Where P = Original pressure of the Argon gas, V = Original Volume of Argon gas, P' = Final pressure of Argon gas, V' = Final Volume of Argon gas.
make V the subject of the equation
V = P'V'/P.................... Equation 2
Given: P = 34.6 atm, V' = 456 L, P' = 2.94 atm.
Substitute these values into equation 2
V = (456×2.94)/34.6
V = 38.75 L
You and your Canadian pen pal enjoy talking about nature together. While your friend describes some birds that she saw today, you realize that one of the birds she described sounds like one you have seen in your home state of Indiana. You remember that all organisms have common and scientific names. Which would be most appropriate to use to confirm with your friend? (1 point) O You should use the bird's common name since it is easier to pronounce than the scientific name. You should use the scientific name because it is local to North America. O You should use the bird's scientific name since that name is the same everywhere in the world. You should use the bird's common name since it is based on the bird's characteristics. he
Answer:
you should use the scientific name because it is the same everywhere in the world
Explanation:
the scientific name of anything and everything is the same around the world.
A student adds 5400.0mL of 0.15M NaOH to 201.2mL of 4.0M NaOH. What is the final [NaOH]?
Answer:
0.287 M
Explanation:
Multiply the concentration of each solution by the volume of each (in liters) to get the moles of NaOH in that solution.
0.15 M • 5.4000 L = 0.81 mol NaOH
4.0 M • 0.2012 L = 0.80 mol NaOH
Add the mol of NaOH together to get the total --> 0.81 + 0.80 = 1.61 mol NaOH
Divide by the total volume of solution (5400.0 mL + 201.2 mL = 5,601.2 mL = 5.6012 L)
1.61 mol / 5.6012 L = 0.287 M NaOH
What is the correct term for a community of plants and animals and their physical surroundings?
individuals (organism)
continent
territory
ecosystem
3. When aqueous solutions of sodium phosphate (Na3PO4) and chromium(III) chloride (CrCl3) react, chromium(III) phosphate forms as a
precipitate.
Identify the spectator ions and write a balanced net ionic
equation for this reaction.
The ions Cr3+ and PO,?-combine to form the precipitate.
Which two ions are spectator ions?
The net ionic reaction is Cr3+ + PO42 ..
The four ionic species initially in solution are Na⁺, PO₄³⁻, Cr³⁺, and Cl⁻. Since the precipitate is composed of Cr³⁺ and PO₄³⁻ ions, the spectator ions must be Na⁺ and Cl⁻.
The complete ionic equation is 3Na⁺(aq) + PO₄³⁻(aq) + Cr₃⁺(aq) + 3Cl⁻(aq) → 3Na⁺(aq) + 3Cl⁻(aq) + CrPO₄(s).
So the balanced net ionic equation for this reaction would be Cr³⁺(aq) + PO₄³⁻(aq) → CrPO₄(s).
Answers:
Which two ions are Spectator Ions?
Na+
Cl-
The net ionic reaction is Cr2+PO42...
Cr2(PO4)3
Pt4 science......
Select correct answer ♡ !
a substance made up of only atoms of one type is called
Answer: chemical element
Explanation: A chemical element is a substance that contains only one type of atom, which is the smallest particle of an element.
Balance the following equation: Fe2O3 + H2O --> Fe(OH)3
A.3,2,1
B.2,2,3
C.1,3,2
D.5,2,10
Answer:
answer is c
Explanation:
hope it helps!!!
Please help me out ........
Answer:c
Explanation:
a ceiling fan's blades collect dust faster than other objects in a room. the constant pushing and rubbing against the air provide a cool breeze for the people in the room. what causes the ceiling fan´s blade to collect dust so quickly.
As the blades rotate, they experience frictional forces as they `rub' against the air; this knocks electrons around, causing the blades to build up a net charge. The charged dust particles then stick to the charged areas of the blades. "The leading edge of the blades usually develops the thickest layer of dust.
To solve this we must be knowing each and every concept related to dust. Therefore, frictional forces allow the ceiling fan´s blade to collect dust so quickly.
What is dust?Dust stirred up by automobiles on the road may account for 33% overall air pollution. Deposits of vehicle or commercial exhaust gas, particles through tire and braking wear, dust from paved streets or potholes, plus dust from building sites all contribute to road dust.
As the blades revolve, frictional forces cause them to 'rub' against the air, knocking electrons around and allowing the blades to accumulate a net charge. The electrified dust particles are subsequently attracted to the charged portions of the blades. Typically, the sharp end of the blades creates the heaviest coating of dust.
Therefore, frictional forces allow the ceiling fan´s blade to collect dust so quickly.
To know more about dust, here:
https://brainly.com/question/29761987
#SPJ2
What do plants do that requires Energy?
Answer:
Photosynthesis
Explanation:
Photosynthesis uses energy from light to convert water and carbon dioxide molecules into glucose (sugar molecule) and oxygen. The oxygen is released, or “exhaled”, from leaves while the energy contained within glucose molecules is used throughout the plant for growth, flower formation, and fruit development.
Heeelllpp !!
What system is sealed and will not release any gases from a chemical reaction?
Answer: closed system
Explanation:
4.550 g of Na2SO4 are added to 0.350 L of water. To this solution, 0.085 L of water were added. What is the new concentration of the solution?
Answer:
0.0736 M or 10.4 g/L
Explanation:
First we convert 4.550 g of Na₂SO₄ into moles, using the molar mass of Na₂SO₄:
4.550 g ÷ 142.04 g/mol = 0.0320 molThen we calculate the final volume of the solution:
Final Volume = 0.350 L + 0.085 LFinal Volume = 0.435 LNow we can proceed to calculate the concentration -in molarity- of the solution:
Molarity = moles / liters0.0320 mol / 0.435 L = 0.0736 MIn g/L the concentration would be:
4.550 g / 0.435 L = 10.4 g/LHow much water must be added to 40.0 g of CaCl2 to produce a solution that is 35.0 wt% CaCl2?
The mass of water present in the solution is 21.5 g.
What is concentration?Concentration refers to the amount of solute in a solution. There are various ways of expressing concentration such as;
Molar concentrationMass concentrationPercentage concentrationWe have the following information;
Percent concentration = 35.0 %
mass of solute = 40.0 g
Mass of water = ?
So;
35 = x/40 + x × 100/1
35 = 100x/40 + x
35(40 + x) = 100x
1400 + 35x = 100x
1400 = 100x - 35x
1400 = 65x
x = 1400/65
x = 21.5 g
Hence the mass of water is 21.5 g.
Learn more about percent concentration: https://brainly.com/question/1600559
Name the following alkyne:
CH3CH2C = C - CI
Answer:
The answer was be 1-chloro-1-butyne
Explanation:
In other words the answer is option letter A
You welcome have a nice day.
The name of the given alkyne, CH₃CH₂C = C – CI is 1 chloro 1 butyne.
The correct option is A.
What are alkynes?Alkynes are unsaturated hydrocarbons, that have carbon-carbon triple bonds.
Chlorobutyne is colorless and is liquid at room temperature and pressure.
It is polar, but still slightly soluble in water.
Thus, the correct option is A, 1 chloro 1 butyne.
Learn more about 1 chloro 1 butyne.
https://brainly.com/question/26210366
acids are and can destroy your skin and bones
Answer:
This is true.
Explanation:
Metals are considered to be ___________________ because they let electricity flow.
Group of answer choices
conductors
circuits
currents
insulators
Answer:
conductors
Explanation:
Because they consist of lattice of atoms with free electrons and these free electrons allows current to flow through.
How many atoms does NH4Br have
Answer:
6
Explanation:
bromine has 1, hydrogen has 4 and nitrogen has 1 therefore equaling 6
The number of atoms in NH₄Br is six.
What is an atom?An atom is a particle of matter that uniquely defines a chemical element. An atom consists of a central nucleus that is surrounded by one or more negatively charged electrons. The nucleus is positively charged and contains one or more relatively heavy particles known as protons and neutrons.
Atoms are the basic building blocks of matter. Anything that takes up space and anything with mass is made up of atoms.
In the given formula, there is one N atom, four H atoms and one Br atom making a total of six atoms.
Therefore, the number of atoms in NH₄Br is six.
Learn more about Atoms, here:
https://brainly.com/question/30898688
#SPJ2
(view the image) explain your answer please
The hammerhead shark can reproduce both sexually and asexually. What characteristic of the offspring would suggest that they were produced
through sexual reproduction? Offspring are-
all the same gender.
genetically diverse.
produced in small number.
produced very slowly.
Answer: I think it is ‘Genetically diverse’
Explanation:
The equilibrium constant for the reaction shown below is Kc=0.0091. If the equilibrium concentrations of A and B are 0.031 M and 0.0823 M, respectively, what is the equilibrium concentration of C?
Answer:
[tex][C]=0.0221M[/tex]
Explanation:
Hello there!
In this case, according to the given chemical reaction at equilibrium:
[tex]3A\rightleftharpoons 3B+2C[/tex]
It is possible for us to set up the equilibrium expression as shown below:
[tex]Kc=\frac{[B]^3[C]^2}{[A]^3}[/tex]
Whereas Kc, [A] and [B] are known as 0.0091, 0.031M and 0.0823M and it is required to calculate [C]; thus, we solve for it as follows:
[tex][C]^2=\frac{[A]^3Kc}{B]^3}[/tex]
[tex][C]=\sqrt{\frac{(0.031)^3*0.0091}{(0.0823)^3}}[/tex]
[tex][C]=0.0221M[/tex]
Best regards!
Earth's polar regions have cold, dry climates because the sun's rays are at a ?
Answer:
not reaching to the polesExplanation:
Answer:
the rays strike at a low level in the polar region
Explanation:
okay so since the polar zones lie between 66.50 north or south the polar regions are always so cold is because strike the low parts
hope this helped!
You are explaining how heat transfers. Your friend insists that when you touch something cold, you become cold
Which statement can be used to explain to them what is really occurring?
O Heat transfers to your body from the cold object until they are all at the same final temperature,
O Heat transfers from your body to the cold object until they are all at room temperature,
O Heat transfers to your body from the cold object until they are all at room temperature
O Heat transfers from your body to the cold object until they are all at the same final temperature,
HELP ME PLZZZ
Answer:
its C
Explanation:
Why are large crystals of sodium chloride used instead of small
crystals when making ice cream
Answer:
Sodium chloride is added to the ice to lower the freezing point of the ice. Large crystals dissolve more slowly than small crystals. This allows time for the ice cream to freeze more evenly.
Explanation: