Please help me! I don't understand this at all. All the info is in the picture. Thank you so much!!!

I believe it is to speed up chemical reactions

Answer:

Reaction type: Single displacement

Reactant: Magnesium

Product: Dihydrogen - H2

Answer:

hot spring

Explanation:

The mineral water in hot springs can also help reduce stress by relaxing tense muscles. Meanwhile as your body temperature rises in the bath, and then cools once you exit can also help you relax and fall into a deeper sleep.

Answer:

Bathypelagic

54% of the ocean lies in the Bathypelagic (aphotic) zone into which no light penetrates. This is also called the midnight zone and the deep ocean. Due to the complete lack of sunlight, photosynthesis cannot occur and the only light source is bioluminescence.

Explanation:

The small surface zone that has light is the photic zone. The entire rest of the ocean does not have light and is the aphotic zone.

Permanent darkness below 1000 meters with bioluminescent bacteria, bottom feeders, and angler fish is where no light reaches.

This is referred to the state of being dark as a result of absence of light in the area.

The light ray penetration decreases with increase in depth thereby making areas below 1000 meters dark with bioluminescent bacteria, bottom feeders, and angler fish which is why option C was chosen.

Read more about Darkness here https://brainly.com/question/24581271

Answer:

Explanation:

The compound shown is Carbon Dioxide and is as a result of a covalent bond between Carbon and Oxygen where carbon is sharing two electrons each with the oxygen atoms.

The O is the atomic symbol for Oxygen and the C is the symbol for Carbon. Carbon Dioxide then has the atomic symbol of CO₂ to show the relative number of atoms of each element in it.

Answer:

0.040M RbOH

Explanation:

The reaction of Rb with water is:

2Rb + 2H₂O → 2RbOH + H₂

As 2 moles of rubidium produce 2 moles of rubidium hydroxide, we need to find the moles of rubidium added. With these moles and the volume we can find molar concentration of RbOH as follows:

Moles Rb = Moles RbOH -Molar mass Rb = 85.4678g)

8.5g * (1mol / 85.4678g) = 0.099 moles RbOH

As 1dm³ = 1L, the volume in liters is 2.5L

That means molarity is:

0.099 moles RbOH / 2.5L =

Answer: 2.23 is the difference.

Explanation: Sodium has an electronegativity of 0.93 and Chlorine has an electronegativity of 3.16, so when Sodium and Chlorine form an ionic bond, in which the chlorine takes an electron away from sodium, forming the sodium cation, Na+, and the chloride anion, Cl-.

Answer:

c. liquid

Explanation:

because the are not very close if the said very closely packed together it would have been a solid

Answer:

See Explanation

Explanation:

The colour of many transition metal complexes stem from transitions of electrons between energy levels. These transitions are governed by the spin selection rules and the colour is determined by the magnitude of crystal field splitting.

According to the spin selection rules, transitions in which ΔS = 0 are forbidden. Hence, a Mn^2+high spin compound is expected to be colourless. However, contrary to the spin selection rules Mn^2+high spin compounds do exhibit transitions in which the intensity is only about one-hundredth of the intensity of the spin allowed transitions. Thus many Mn^2+  high spin compounds such as Mn(NO3)2 are very pale pink or off white.

Note also that the crystal field stabilization energy of Mn^2+ which is a d^5 low spin ion is zero hence the very pale colour observed.

K4[Mn(CN)6] is deep blue as a result of charge transfer. Also, the compound exhibits an observed crystal field stabilization energy because it is a d^5 low spin compound hence the observed colour. Its low spin nature is because the cyanide ion is a strong field ligand hence it causes a greater magnitude of crystal filed splitting.

The following compounds are colourless;

Zn(NO3)2

CdSO4

AgClO3

One thing that is common to all the compounds listed above is that they are all d^10 compounds. This means that they all possess completely filled d-orbitals hence they are colourless.

Answer:

Warmer

Cooler

Explanation:

Answer:

kc = [G]² / [E] [F], kc = [1.30M]² / [0.60M] [0.80M]

Explanation:

The reaction is:

E + F ⇄ 2G

The equilibrium constant, kc, must be written as the ratio of the molar concentrations of products over reactants. Each concentration powered to its coefficient.

For the reaction of the problem, kc is:

Replacing the given concentrations:

Answer:

This really depends on what you belive in honestly, as a christian i belive a supreme being created all but school says something happend with bacteria and evolution or something lol. If this was a serious question and you need an answer for school just search up the evolution theory

Explanation:

Answer:

Explanation:

harmless

...............

Answer:

78.8%

Explanation:

The equation of the reaction is;

2 Al(s) + Fe2O3(aq) ------> Al2O3(aq) + 2Fe(s)

Number of moles in 20g of Al= 20g/27 g/mol = 0.74 moles

From the reaction equation;

2 moles of Al yields 2 moles of Fe

0.74 moles of Al yields 0.74 moles of Fe

Hence;

Mass of Fe produced = 0.74 moles of Fe * 56 g/mol

Mass of Fe produced = 41.44 g of Fe (This is the theoretical yield of Fe)

percent yield = actual yield/ theoretical yield  * 100

actual yield = 32.67 grams of iron

percent yield = 32.67 g/41.44 g * 100

percent yield = 78.8%

Answer:

The reaction will proceed to the right to attain the equilibrium.

Explanation:

Step 1: Write the balanced equation

2 N₂(g) + 3 H₂(g) = 2 NH₃(g)

Step 2: Calculate the reaction quotient

The reaction quotient (Qc) is calculated in the same way as the equilibrium constant (Kc) but it uses the concentrations at any time.

Qc = [NH₃]² / [N₂]² × [H₂]³

Qc = 8.00² / 1.50² × 1.00³ = 28.4

Since Qc ≠ Kc, the reaction is not at equilibrium.

Since Qc < Kc, the reaction will proceed to the right to attain the equilibrium.

Answer:

A person's skin color, hair color, dimples, freckles, and blood type are all examples of genetic variations that can occur in a human population.

Explanation:

Answer:

1.765x10²⁵ molecules

Explanation:

First we convert 7.328 moles of propane (C₃H₈) into moles of H₂O, using the stoichiometric coefficients of the balanced reaction:

Then we convert 29.312 moles of H₂O into molecules, using Avogadro's number:

Answer:

The correct answer is - 46.60 mL.

Explanation:

To find the volume of the gas at its new increased temperature we need to use Charl Law that shows the direct relationship between Volume and Temperature while Pressure remains constant.

V1 = 40 ml

T1  = 30 degree C + 273 = 303 K

V2  = ?

T2  = 80 degree C + 273 = 353 K

Charl Equation is:

V 1/T 1  =  V 2/ T 2

(V1) * (T2)/ T1= V2

placing value:

40*353/303 = V2

= 14120/303

Vf = 46.60 mL

Answer:

its 2,2,1

Explanation:

Answer:

increase answer

Explanation:

i hope that is right

Answer: The energy of an electron in the n = 2 level of a hydrogen atom is 3.40 eV.

Explanation:

Given: n = 2

The relation between energy and [tex]n^{th}[/tex] orbit of an atom is as follows.

[tex]E = - \frac{13.6}{n^{2}} eV[/tex]

Substitute the values into above formula as follows.

[tex]E = - \frac{13.6}{n^{2}} eV\\= - \frac{13.6}{(2)^{2}}\\= - 3.40 eV[/tex]

The negative sign indicates that energy is being released.

Thus, we can conclude that the energy of an electron in the n = 2 level of a hydrogen atom is 3.40 eV.

Answer:

its b

Explanation:

Answer:

a) (I) and (iii) only

Explanation:

Because different plastics have different size.

Answer: The approximate pressure of the gas after it is heated to 278 K is 0.468 atm.

Explanation:

Given: [tex]T_{1}[/tex] = 178 K,      [tex]P_{1}[/tex] = 0.3 atm

[tex]T_{2}[/tex] = 278 K,           [tex]P_{2}[/tex] = ?

According to Gay Lussac law, at constant volume the pressure of a gas is directly proportional to the temperature.

Formula used to calculate the pressure is as follows.

[tex]\frac{P_{1}}{T_{1}} = \frac{P_{2}}{T_{2}}\\[/tex]

Substitute the values into above formula is as follows.

[tex]\frac{P_{1}}{T_{1}} = \frac{P_{2}}{T_{2}}\\\frac{0.3 atm}{178 K} = \frac{P_{2}}{278 K}\\P_{2} = 0.468 atm[/tex]

Thus, we can conclude that the approximate pressure of the gas after it is heated to 278 K is 0.468 atm.

Answer: 6.04 g

Explanation: In STP conditions, amoint of substance

n = V / Vm = 4.23 l / 22.41 l/mol = 0.188755 mol

Molar mass M(O2) = 32 g/mol  and

mass m = nM

Answer:

3mL of 5M NaOH must be added to adjust the pH to 7.20

Explanation:

When NaOH is added to phosphoric acid, H₃PO₄, the reaction that occurs are:

NaOH + H₃PO₄ ⇄ NaH₂PO₄ + H₂O pKa1 = 2.15

NaOH + NaH₂PO₄ ⇄ Na₂HPO₄ + H₂O pKa2 = 7.20

NaOH + Na₂HPO₄ ⇄ Na₃PO₄ + H₂O pKa3 = 12.38

We can adjust the pH at 7.20 = pKa2 if NaH₂PO₄ = Na₂HPO₄. To make that, we must convert, as first, all H₃PO₄ to NaH₂PO₄ and the half of NaH₂PO₄ to Na₂HPO₄. To solve this question we need to find the moles of phophoric acid in the initial solution. 1.5 times these moles are the moles of NaOH that must be added to fix the pH to 7.20:

Moles H₃PO₄:

100mL = 0.100L * (0.100mol / L) = 0.0100 moles H₃PO₄

Moles NaOH:

0.0100 moles H₃PO₄ * 1.5 = 0.0150 moles NaOH

Volume NaOH:

0.0150 moles NaOH * (1L / 5moles) = 3x10⁻³L 5M NaOH are required =

3 mL of 5 Molar NaOH is required to adjust the pH of phosphoric acid.

It is the negative log of the concentration of Hydrogen ions in the solution.

To calculate the volume of NaOH first, calculate the moles of NaOH and H₃PO₄.

Moles of H₃PO₄.

[tex]\rm moles \ of \ H_3PO_4 = 100\rm \ mL = 0.100\rm \ L \times (0.100 \ mol / L)\\\\\rm moles \ of \ H_3PO_4 = 0.01[/tex]

The moles of NaOH:

[tex]\rm Moles \ of \ NaOH =0.01 \ moles \ H_3PO_4\times 1.5 \\\\\rm Moles \ of \ NaOH= 0.0150[/tex]

The volume of NaOH:

[tex]\rm Volume\ of \ NaOH = \rm 0.0150\ moles\ NaOH \times (1 \ L / 5 \ moles) \\\\\rm Volume\ of \ NaOH = 3\times 10^{-3} L[/tex]

Therefore, 3 mL of 5 Molar NaOH is required to adjust the pH of phosphoric acid.

Learn more about pH:

https://brainly.com/question/3262317

Answer:

Ksp = [Ca⁺²] × [C₂O₄⁻²]

Explanation:

Step 1: Write the balanced reaction for the dissociation of calcium oxalate

CaC₂O₄(s) ⇄ Ca⁺²(aq) + C₂O₄⁻²(aq)

Step 2: Write the expression for the solubility product constant (Ksp) of calcium oxalate

The solubility product constant is the equilibrium constant for the dissociation reaction, that is, it is equal to the product of the concentrations of the products raised to their stoichiometric coefficients divided by the product of the concentrations of the reactants raised to their stoichiometric coefficients. It doesn't include solids nor pure liquids because their activities are 1.

Ksp = [Ca⁺²] × [C₂O₄⁻²]