PLEASE HELP I NEED THIS BY TOMORROW


A diver begins on a platform 10 meters
above the surface of the water the divers height is given by the equation h(t)=-4.9t^2+3.5t+10 where r is the time in seconds after the diver jumps

How long does it take the diver to reach a point 1 meter above the water

How many solutions does your equation from part A have

Do all of the solutions to the equation make sense in the situation explain

We can say with 90% confidence that the true standard deviation of the monthly cost of these leases falls between $279.49 and $1688.26.

To find the 90% confidence interval for the true standard deviation of the monthly cost of these leases, we need to use the chi-square distribution. First, we need to calculate the sample standard deviation of the monthly cost, which is $31.48. Then, we can use the formula:

CI = [(n-1)*s^2/chi2(a/2,n-1), (n-1)*s^2/chi2(1-a/2,n-1)]

where CI is the confidence interval, n is the sample size (which is 6 in this case), s is the sample standard deviation, chi2(a/2,n-1) is the chi-square value for the lower tail probability of a/2 with n-1 degrees of freedom, and chi2(1-a/2,n-1) is the chi-square value for the upper tail probability of 1-a/2 with n-1 degrees of freedom.

For a 90% confidence interval, a/2 = 0.05, so we need to find the chi-square values for the lower and upper tail probabilities of 0.05/2 = 0.025 and 1-0.025 = 0.975, respectively, with 5 degrees of freedom (n-1).

Using a chi-square table or calculator, we find that chi2(0.025,5) = 11.07 and chi2(0.975,5) = 0.83. Substituting these values into the formula, we get:

CI = [(6-1)*31.48^2/11.07, (6-1)*31.48^2/0.83] = [$279.49, $1688.26]

Know more about 90% confidence here:

https://brainly.com/question/31420373

#SPJ11

Answer:

Na

Step-by-step explanation:

The survey could be biased because the people surveyed were chosen randomly.

The equation of the parabola that says point (x, y) is on the parabola is (x - 5)² = 14(y - 3.5) and equation of the line is y - 6 = 2/5 (x - 3).

Given that,

Focus of the parabola = (5, 7)

Directrix is x axis or y = 0

Focus is the point from where all the points to the parabola are of equal distance.

All the points (x, y) are in such a way that the points are at equal distance from (5, 7) and the x axis.

Vertex will be at the midpoint.

Midpoint is (5, 3.5).

So the equation of the parabola will be (x - 5)² = 14(y - 3.5)

Given line is,

y + 4 = 2/5 (x - 9)

Comparing with the point slope form,

Here, slope = 2/5 and the line passes through (9, -4).

Another equation with same slope and passing through (3, 6) is,

y - 6 = 2/5 (x - 3)

Hence the equation of the parabola is (x - 5)² = 14(y - 3.5) and equation of the line is y - 6 = 2/5 (x - 3).

Learn more about Parabola and Line here :

https://brainly.com/question/31142122

#SPJ1

The probability mass function of the hypergeometric distribution can be written as:

P(X = x) = (M choose x) * (N-M choose n-x) / (N choose n)

n = total number of oranges in the group from which the 50 pieces are selected
m = total number of successes (i.e. oranges) in the group from which the 50 pieces are selected
n [ choose ] m = number of ways to choose m oranges out of n oranges in the group
success [ choose ] = the desired outcome of selecting an orange in each trial (i.e. success)
the key components of a hypergeometric distribution. In this case, we are randomly selecting 50 pieces, and the random variable X represents the number of oranges selected. Here are the components:

1. Population size (N): The total number of pieces in the population.
2. Number of successes in the population (M): The total number of oranges in the population.
3. Sample size (n): The number of pieces you are selecting, which is 50 in this case.
4. Number of successes in the sample (x): The number of oranges selected in the sample, represented by the random variable X.

The probability mass function of the hypergeometric distribution can be written as:

P(X = x) = (M choose x) * (N-M choose n-x) / (N choose n)

learn more about probability

https://brainly.com/question/28920252

#SPJ11

Answer: When an epitaxial layer is grown on a substrate, the lattice constant of the epitaxial layer may differ from that of the substrate, leading to strain in the layer. In the case of a simple cubic lattice, the lattice constant can be defined as the distance between two adjacent atoms along any lattice vector.

The lattice mismatch between the substrate and the epitaxial layer can be quantified by the lattice mismatch parameter, δ, which is defined as:

δ = (a2 - a1) / a1

where a1 is the lattice constant of the substrate and a2 is the lattice constant of the epitaxial layer. If δ is positive, the epitaxial layer is under compressive strain, while if δ is negative, the epitaxial layer is under tensile strain.

The strain in the epitaxial layer can also be quantified by the strain parameter, ε, which is defined as:

ε = (a2 - a1) / a2

In the case of a simple cubic lattice, the strain parameter is equal to the lattice mismatch parameter, i.e., ε = δ.

When an epitaxial layer is grown, it may undergo island formation due to the strain induced by the lattice mismatch with the substrate. The thickness of the epitaxial layer at which island formation occurs can be estimated using the critical thickness, t_c, which is given by:

t_c = (h_bar^2 * δ^2) / (2 * E * γ)

where h_bar is the reduced Planck constant, E is the elastic modulus of the epitaxial layer, and γ is the surface energy of the epitaxial layer.

If the thickness of the epitaxial layer is less than the critical thickness, the epitaxial layer remains continuous and undergoes strain relaxation. If the thickness of the epitaxial layer is greater than the critical thickness, the epitaxial layer undergoes island formation.

In summary, the growth of an epitaxial layer on a substrate with a different lattice constant can lead to strain in the layer, which can result in island formation at a critical thickness. The critical thickness can be estimated using the lattice mismatch parameter, elastic modulus, and surface energy of the epitaxial layer.

Epitaxial growth refers to the process of depositing a thin layer of material on a substrate such that the crystal structure of the layer mimics that of the substrate. In this case, we are considering the growth of an epitaxial layer of thickness t2 with a relaxed (unstrained) lattice constant a2 on a substrate with a relaxed lattice constant a1.

Assuming a simple cubic lattice for simplicity, we can use the equation for lattice mismatch to calculate the strain between the layer and substrate:

ε = (a2 - a1) / a1

If the lattice constants are matched, ε = 0 and there is no strain. However, if there is a mismatch, there will be strain in the layer. In the case of a relaxed layer, we assume that the strain has been relieved and the layer has reached equilibrium with the substrate.

The thickness of the layer, t2, can affect the strain in the layer. Generally, thinner layers will have less strain because they are more able to conform to the lattice of the substrate. Thicker layers may have more strain, which can lead to defects in the layer.

Overall, the thickness of the epitaxial layer can affect the strain in the layer and should be carefully controlled to minimize defects.

Learn more about Epitaxial here:

https://brainly.com/question/30326071

#SPJ11

Answer:

149.32 miles

Step-by-step explanation:

[tex]245 - 95.68 = 149.32[/tex]

True, the half-life equations are an application of integrated rate laws. False, pseudo-order reaction kinetics is not a way to simplify a more complicated rate law by holding one (or more) of the reagents essentially constant. False, half-life is not the time required for the rate of the reaction to decrease by one half. The rate law equation expresses the rate of the reaction in terms of the concentrations of the reactants.

1. The half-life equations are an application of integrated rate laws: True. Half-life equations are derived from integrated rate laws to express the time required for the concentration of a reactant to decrease to half its initial value.

2. Pseudo-order reaction kinetics is a way to simplify a more complicated rate law by holding one (or more) of the reagents essentially constant: True. Pseudo-order reaction kinetics simplifies complex rate laws by considering one or more reagents to be in excess, effectively making their concentrations constant, which leads to a simpler rate law.

3. Half-life is the time required for the rate of the reaction to decrease by one half: False. Half-life is the time required for the concentration of a reactant to decrease by one half, not the rate of the reaction.

True, the half-life equations are an application of integrated rate laws. False, pseudo-order reaction kinetics is not a way to simplify a more complicated rate law by holding one (or more) of the reagents essentially constant. False, half-life is not the time required for the rate of the reaction to decrease by one half. The rate law equation expresses the rate of the reaction in terms of the concentrations of the reactants.

To learn more about equations, click here:

brainly.com/question/29657983

#SPJ11

The correct answer is b. One Sample Hypothesis Test. In a one-sample hypothesis test, we compare the sample data to a predetermined sample hypothesis and then use statistical methods to make an inference about the population parameter.

This inference is based on the assumption that the sample is representative of the population, and therefore provides insight into the characteristics of the population parameter.


To clarify the terms:

- Hypothesis: A statement or assumption made about a population parameter that needs to be tested.
- Testing: The process of analyzing data to determine if a hypothesis is supported or refuted.
- Inference: Drawing conclusions about a population parameter based on sample data.
- Sample Hypothesis: A hypothesis that is tested using sample data.
- Population Parameter: A characteristic or measure of a population, such as the mean or standard deviation.

In a one-sample hypothesis test, you compare the sample statistic (e.g., mean or proportion) to the known or hypothesized population parameter to make an inference about the population. This process helps you determine if there is a significant difference between the sample statistic and the population parameter.

Learn more about inference here:- brainly.com/question/29774121.

#SPJ11

The main purpose of inferential statistics is to estimate a characteristic of a population based on a sample. This means that inferential statistics are used to make generalizations about a population based on the data that has been collected from a sample of that population. Inferential statistics are used in many different fields, including psychology, economics, and healthcare.

One important aspect of inferential statistics is accounting for variability within a population. This involves understanding the different factors that can influence the outcome of a study and accounting for them in the analysis. For example, if a study is looking at the effects of a new medication on a certain condition, it is important to account for variables such as age, gender, and other health conditions that may influence the outcome.

In addition to accounting for variability, inferential statistics can also help to adjust analyses to improve validity. This means that researchers can use inferential statistics to ensure that their results are reliable and accurate. For example, researchers may use statistical tests to determine whether their findings are significant or whether they are likely to be due to chance.

Finally, inferential statistics can also be used to decide whether the standard deviation is skewed by outliers. Outliers are data points that are significantly different from the rest of the data and can have a large impact on the overall results. By using inferential statistics, researchers can determine whether outliers are having a significant impact on the results and adjust their analyses accordingly.

Overall, the main purpose of inferential statistics is to estimate a characteristic of a population based on a sample. By accounting for variability, adjusting analyses, and dealing with outliers, researchers can use inferential statistics to make accurate and reliable conclusions about a population.

Know more about statistics here:

https://brainly.com/question/31538429

#SPJ11

To find the area of the shaded region under the standard normal curve, we need to use technology. Specifically, we can use a standard normal table or a calculator with a normal distribution function. Using a standard normal table, we look up the probability of Z being less than or equal to -2.29, which is 0.0114.

This is the area to the left of -2.29 on the standard normal curve. Since the normal curve is symmetric, the area to the right of 2.29 is also 0.0114. Therefore, the area of the shaded region is the sum of these two areas, which is 0.0228. If we use a calculator with a normal distribution function, we can find the area directly. Using the function NORMSDIST(-2.29), we get the probability of Z being less than or equal to -2.29, which is 0.0114. Again, since the curve is symmetric, the area to the right of 2.29 is also 0.0114. Therefore, the area of the shaded region is 0.0114 + 0.0114 = 0.0228.

Either way, the area of the shaded region under the standard normal curve is 0.0228. (Remember to round to four decimal places as needed.)

To find the area of the shaded region under the standard normal curve, follow these steps:

1. Identify the given z-score: In this case, z = -2.29.

2. Use technology to find the area: You can use a standard normal table, a calculator with a built-in normal distribution function, or an online calculator to find the area to the left of the z-score.

3. Round the result to four decimal places: Once you obtain the area, round it to four decimal places as needed.

Using technology (such as an online calculator), you can find the area to the left of z = -2.29. The area of the shaded region is approximately 0.0110.

Learn more about the area here:- brainly.com/question/27683633

#SPJ11

If Vicky jogged 2³/₄ miles in ¹/₂ hours, her average rate of speed in miles per hour is 5¹/₂ miles per hour.

The average speed refers to the rate of movement, which is the quotient of the total distance and the time taken to cover the given distance.

While the given speed was expressed for half an hour, we can convert this speed to per-hour by dividing the given speed by ¹/₂ hours.

Alternatively, we can use multiplication, which is the inverse of division to compute the average speed per hour.

Vicky's given jogging distance in ¹/₂ hours = 2³/₄ miles

Vicky's average jogging speed = 5¹/₂ miles per hour (2³/₄ ÷ ¹/₂) = (2³/₄ x ²/₁)

Learn more about the average speed at https://brainly.com/question/29798040.

#SPJ1

Koel's new balance in his checking account is $845.99, which is option (a).

To find Koel's new balance in his checking account, we need to subtract the total amount of the checks he wrote on March 18 and add the amount of his deposit on March 19 to his balance on March 17.

Total amount of checks = $56.24 + $97.00 + $22.50 = $175.74

New balance = balance on March 17 - the total amount of checks + deposit

                      = $846.73 - $175.74 + $175.00

                      = $845.99

Therefore, Koel's new balance in his checking account is $845.99, which is an option (a).

Learn more about arithmetic addition and subtraction here:

https://brainly.com/question/29735725

#SPJ1

well, we know its center and a point on it, and the distance from its center to a point is its radius

[tex]~~~~~~~~~~~~\textit{distance between 2 points} \\\\ \stackrel{ center }{(\stackrel{x_1}{5}~,~\stackrel{y_1}{-7})}\qquad (\stackrel{x_2}{-3}~,~\stackrel{y_2}{1})\qquad \qquad d = \sqrt{( x_2- x_1)^2 + ( y_2- y_1)^2} \\\\\\ \stackrel{ radius }{r}=\sqrt{(~~-3 - 5~~)^2 + (~~1 - (-7)~~)^2} \implies r=\sqrt{(-3 -5)^2 + (1 +7)^2} \\\\\\ r=\sqrt{( -8 )^2 + ( 8 )^2} \implies r=\sqrt{ 64 + 64 } \implies r=\sqrt{ 128 }\implies r\approx 11.31[/tex]

(a) The maximum speed of the bob can be found using the conservation of energy. At the maximum displacement, all of the potential energy of the system is converted into kinetic energy, so we can write:

mgh = (1/2)mv^2

where m is the mass of the bob, g is the acceleration due to gravity, h is the maximum height reached by the bob, and v is its maximum speed.

We can find h using trigonometry:

h = L(1 - cosθ)

where L is the length of the pendulum and θ is the maximum angle of displacement.

Substituting for h and solving for v, we get:

v = sqrt(2gh) = sqrt(2gL(1-cosθ)) = 0.546 m/s

(b) The maximum angular acceleration can be found using the equation:

α = -ω^2θ

where ω is the angular frequency of the pendulum, given by:

ω = sqrt(g/L)

Substituting for ω and θ, we get:

α = -g/L * sinθ = -1.46 rad/s^2

(c) The maximum restoring force on the bob is given by:

F = -mg sinθ = -0.406 N

(d) Using the simple harmonic motion equation for the displacement of a pendulum, we can find the maximum speed, maximum angular acceleration, and maximum restoring force:

x = A sin(ωt + φ)

where A is the amplitude of the motion, ω is the angular frequency, t is time, and φ is the phase constant.

The maximum speed occurs when the displacement is zero, so we can find it by taking the derivative of x with respect to time:

v = ωA cos(ωt + φ)

Substituting for ω and A, we get:

v = sqrt(gL)cos(ωt + φ) = 0.546 m/s

The maximum angular acceleration occurs when the displacement is at its maximum, so we can find it by taking the second derivative of x with respect to time:

α = -ω^2A sin(ωt + φ)

Substituting for ω and A, we get:

α = -g/L sin(ωt + φ) = -1.46 rad/s^2

The maximum restoring force occurs when the displacement is at its maximum, so we can find it using Hooke's law:

F = -kx = -mg sin(ωt + φ) = -0.406 N

where k is the spring constant of the pendulum.

(e) The answers obtained using the two different analysis models are the same, as expected. Both methods are based on the same underlying physical principles and equations, and they provide equivalent descriptions of the motion of the pendulum. However, the simple harmonic motion analysis is more general and can be applied to a wider range of systems, while the particle model is specific to cases where the mass is concentrated at a single point.

Visit here to learn more about kinetic energy brainly.com/question/26472013

#SPJ11

The slope of a line does not necessarily correspond to the true rate constant, k. The slope of a line in a plot of ln([A]t/[A]0) vs time is equal to -k, but this is only true under certain conditions, such as when the reaction is first-order with respect to reactant A.

In general, the slope of a line can only give an estimate of the rate constant. The expression that the slope equals is dependent on the specific plot and reaction conditions.

The slope of the line does not necessarily correspond to the true rate constant, k, directly. This is because the relationship between the slope and the rate constant depends on the order of the reaction.

For a first-order reaction, the equation is ln[A] = -kt + ln[A₀]. In this case, the slope of the line (when plotting ln[A] vs. time) corresponds to the true rate constant, k, and is negative.

For a second-order reaction, the equation is 1/[A] = kt + 1/[A₀]. In this case, the slope of the line (when plotting 1/[A] vs. time) corresponds to the true rate constant, k, and is positive.

So, the expression that the slope equals depends on the order of the reaction. For a first-order reaction, the slope equals -k, and for a second-order reaction, the slope equals k.

Learn more about slope at: brainly.com/question/3605446

#SPJ11

The diameter of the cone is 64. 2 units

The formula for calculating the volume of a cone is expressed as;

V = πr²h/3

Given that the parameters are;

Substitute the values, we have;

343π = πr²× 21/3

cross multiply the values

343π(3) = πr²

Multiply the values

1029π = πr²

Divide by the coefficients

r² = 1029

find the square root of the value

r = 32. 07

But diameter = 2(radius)

substitute the values

Diameter = 64. 2 units

Read more about volume at: https://brainly.com/question/1972490

#SPJ1

The first blue peak around day 17 represents the highest concentration of antibodies that occurs after the first exposure to antigen X.

Antibodies are proteins that are produced by the immune system in response to the presence of an antigen, which is a foreign substance that the body recognizes as a threat. When the body is exposed to antigen X for the first time, it takes some time for the immune system to recognize and respond to it.

As the immune system begins to produce antibodies against antigen X, their concentration in the bloodstream gradually increases until it reaches a peak, which is the point at which the body has produced the maximum amount of antibodies against that antigen. This first blue peak indicates that the body has successfully mounted an immune response to antigen X, and is now better equipped to recognize and neutralize it if it encounters it again in the future.

Learn more about antigen here:

brainly.com/question/14724412

#SPJ11

Simple Accounting - Balance Sheet. Assets Liabilities Shareholders' Equity. So, the Shareholders' Equity is $452,704.48 (Option a).

The balance sheet must always balance, hence the name. By reviewing the balance sheet, stakeholders can evaluate a company's financial health, including its liquidity, solvency, and overall performance.
Based on the provided information, we have:
Assets: $1,391,095.49
Liabilities: $938,391.01

To find the Shareholders' Equity, we need to apply the basic accounting equation, which is:
Assets = Liabilities + Shareholders' Equity

To solve for Shareholders' Equity, we need to rearrange the equation:
Shareholders' Equity = Assets - Liabilities

Now, we can plug in the given values:

In accounting, a balance sheet is a financial statement that shows a company's assets, liabilities, and shareholder's equity at a specific point in time. The purpose of the balance sheet is to provide a snapshot of the company's financial position and to ensure that the total value of assets equals the total value of liabilities and shareholders' equity. This is known as the accounting equation, which is:

Assets = Liabilities + Shareholders' Equity

Shareholders' Equity = $1,391,095.49 - $938,391.01
Shareholders' Equity = $452,704.48

So, the Shareholders' Equity is $452,704.48 (Option a).

Learn more about Balance:

brainly.com/question/28699225

#SPJ11

Answer:

  (d)  $19,389.84

Step-by-step explanation:

You want to know the credit card balance after 2 years if the initial balance is $13,000 and the interest rate is 19.99% compounded continuously.

The formula for the value of the account is ...

  A = P·e^(rt)

where P is the principal amount borrowed, r is the annual interest rate, and t is the number of years.

For the given values, the account balance will be ...

  A = $13000·e^(0.1999·2) ≈ $19389.84

The balance on the card will be $19,389.84, choice D.

<95141404393>

All the statememts i,ii,iii are true. Correlation requires identified explanatory and response variables, scatterplots require both variables to be quantitative, and every least-squares regression line passes through (x - bar, y - bar).

Correlation, scatterplots, and least- places retrogression lines are important statistical tools that help us understand the  connections between variables. Correlation requires us to identify the  explicatory and response variables, which are the two variables being compared. The strength and direction of the relationship between the variables are measured by the correlation measure, which ranges from-1 to 1.

A correlation measure of 0 indicates that there's no direct relationship between the variables.   Scatterplots, on the other hand, are graphs that visually display the relationship between two quantitative variables. Thex-axis represents one variable, while the y- axis represents the other variable. The data points are colluded on the graph, and the pattern they form helps us identify the type of relationship that exists between the variables.

Learn more about scatter plots at

https://brainly.com/question/30050095

#SPJ4

The residual is the difference between the actual revenue and the predicted revenue that is $213.

When analyzing the relationship between two variables, such as the number of customers and the revenue generated, it is often useful to use a regression model to predict the value of one variable based on the other. In this case, we are given a table that shows the revenue generated by a store for different numbers of customers, and we want to find the residual for 10 customers.

To find the predicted revenue for 10 customers, we need to use the regression model to estimate the revenue based on the given data. In this case, we can see from the table that the revenue generated by 9 customers is $890, and the revenue generated by 11 customers is $1170. We can use these values to estimate the revenue generated by 10 customers using linear interpolation.

Linear interpolation is a method for estimating a value between two known values based on a linear relationship between them. In this case, we can use the following formula to estimate the revenue for 10 customers:

Predicted revenue = Revenue for 9 customers + (Revenue for 11 customers - Revenue for 9 customers) / (11 - 9) * (10 - 9)

Predicted revenue = $890 + ($1170 - $890) / (11 - 9) * (10 - 9)

Predicted revenue = $1030

Therefore, the predicted revenue for 10 customers is $1030.

To know more about data set,

https://brainly.com/question/22210584

#SPJ11

Answer:

108

Step-by-step explanation:

This question isn't hard at all! They try to confuse you by giving you a whole bunch of information you don't need. In the question you see out of 133 elem students, only 25 do it in the morning. That means the rest do it in the evening. So 25-133=108.

Simple linear regression is a statistical method used to model the relationship between an independent variable (x) and a dependent variable (y).

In this analysis, a one-unit change in the independent variable (x) is assumed to result in the same consistent change in the dependent variable (y). This relationship is represented by a straight line, also known as the regression line, which is mathematically defined as y = a + bx, where 'a' is the y-intercept and 'b' is the slope of the line. The main goal of simple linear regression is to find the best-fitting line that minimizes the differences between the observed values and the predicted values of the dependent variable (y).

To learn more about variable visit;

https://brainly.com/question/17344045

#SPJ11

Centimeters are converted into grams when comparing the two units of mass in order to have accuracy and avoid confusion in measurement, we need to convert one unit to another.

Because using grams makes most commonly occurring masses into large (and long) numbers, which is inconvenient. Some people use cgs (centimeter-gram-second) units and others use SI (meter-kilogram-second), so it's not really true that the kg is the basic unit for mass.

To make a comparison, we should convert the measurements to the same units. The conversion between different types of units makes sense. A cm3 equals an ml. This makes changing distance and volume easy to understand and calculate.

Learn more about mass here:

https://brainly.com/question/19694949

#SPJ1

b. False. Snowball sampling is a non-probability sampling technique where the initial set of respondents are selected based on the researcher's judgment or convenience, rather than through a probability-based method. The idea is to rely on the social networks of the initial respondents to identify and recruit additional participants.

In snowball sampling, the researcher uses the information provided by the initial participants to identify and recruit others who may be eligible and willing to participate. This process continues until the desired sample size is achieved or until data saturation is reached.

While snowball sampling can be a useful method for reaching hard-to-reach or hidden populations, it is not a probability-based method and may be subject to biases introduced by the initial selection of participants and the snowballing process itself. Therefore, it may not be appropriate for all research questions and contexts.

To learn more about probability visit;

https://brainly.com/question/30034780

#SPJ11

Answer: Factor 55 out of 5x5x.5(x)−5y5(x)-5yFactor 55 out of −5y-5y.5(x)+5(−y)5(x)+5(-y)Factor 55 out of 5(x)+5(−y)5(x)+5(-y).5(x−y)

Answer: 5.

Step-by-step explanation: Please give Brainlist.

Hope this helps!!!!

I can answer more questions if you want!!!!

The factor for 5x and 5y-2 is 1.

An algebraic expression or number that divides another expression or number equally, leaving no remainder.

We have,

5x and 5y-2.

Now, factoriese the each term we get

5x = 5 . x

5y-2 = 5 . y - 2 . 1

As there is no common factor here.

Learn more about Factors here:

https://brainly.com/question/31379856

#SPJ2

Answer:

1. Second

2. x-axis

Step-by-step explanation:

I am sorry if these are wrong

Explanation:

If we started at y = 0, then the bar for last year's sales would be 800 units tall. This is to represent the $800 in sales last year.

However, we start at $600 on the y axis instead. This means the bar for last year's sales would be 200 units tall (because 800-600 = 200).

The bar for this year's sales is 600 units tall (because 1200-600 = 600)

Divide those two heights

600/200 = 3

The second bar is 3 times taller than the first bar.

But wait, the jump from $800 to $1200 is NOT "times 3". The jump is instead "times 1.5" which we can determine like so: 1200/800 = 1.5

In other words, 1.5*800 = 1200

Therefore, the fact we start at 600 on the y axis causes the 2nd bar to be taller than it should be in relation to the first. It causes a distortion.

Check out the diagram below. Figure 1 has us start at 600, which is deceiving. Be careful when you see such a chart in a newspaper for instance. Figure 2 has us start at 0 and now things are in the correct proportion. I used LibreOffice Calc spreadsheet to make the charts.