PLEASE HELP, DUE AT 12:00

Answer:

Taxonomy

Explanation:

Answer:

1 - NO2 at 339 K

2 - Ne at 371 K

3 - H2 at 371 K

4 - H2 at 425 K

Explanation:

Kinetic Energy is directly related to temperature; the higher the temperature the higher the kinetic energy. Kinetic energy is also equal to 12m⋅v2, so if we want a high velocity we want high temp and low mass. So let's list out approximate masses:

m(H2)≈2

m(NO2)≈46

m(Ne)≈20

So we have NO2 at 339 K, the lowest temperature out of the mix, and the highest mass out of the mix, so this is moving the slowest.

In contrast, we have H2 at 425 K, the highest temperature out of the mix, and the lowest mass out of the mix, so this is moving the fastest.

Now we have Ne and H2 at 371 K, since they are at the same temperature they have the same kinetic energy. But H2 is lighter than Ne so it must be faster. To quantify this mathematically, let's assume (this is wrong but just as an assumption for an example) KE at 371 K is 100:

100=12⋅m⋅v2

200=m⋅v2

√200m=v

So H2 is about v=10 and Ne is about v=√10≈3

So the order to recap is:

1 - NO2 at 339 K

2 - Ne at 371 K

3 - H2 at 371 K

4 - H2 at 425 K

Hope that makes it clearer!

Answer:

the answer to this is 71.0 grams of chlorine

Answer:

Cell is defined as the smallest unit or basic unit of life.

the smallest part of a living thing that can carry out the activities needed for life. Basically the unit of all forms of life.

Explanation:

hope this helps in anyway :)

Answer:

See explanation.

Explanation:

Hello there!

In this case, according to the description of the chemical reaction, it is possible to write the corresponding equation as follows:

[tex]Mg+2HCl\rightarrow MgCl_2+H_2[/tex]

Whereas we are given the mass of magnesium and the concentration and volume of HCl; it means that we can calculate the moles of hydrogen yielded by each of these reactants in order to identify the limiting reactant:

[tex]m_{H_2}^{by\ Mg}=23gMg*\frac{1molMg}{24.305gMg}*\frac{1molH_2}{1molMg}=0.95gH_2 \\\\m_{H_2}^{by\ HCl}=0.412L*2.6\frac{molHCl}{1L}*\frac{1molH_2}{2molHCl}*=0.54gH_2[/tex]

Therefore, we infer that the limiting reactant is HCl as it yields the fewest moles of hydrogen. Next since the vapor pressure of water at 81 °C is about 0.4675 atm we infer that the pressure of hydrogen is 2.23 atm - 0.4675 atm = 1.7625 atm. In such a way, we use the ideal gas equation to obtain the volume of hydrogen:

[tex]V_{H_2}=\frac{0.54molH_2*0.08206\frac{atm*L}{mol*K}*(81+273.15)K}{1.7625atm} \\\\V_{H_2}=8.9L[/tex]

Finally, since the pressure of water is 0.4675 atm and the volume is the same for both, we obtain the moles of water and subsequently the required grams as shown below:

[tex]n_w=\frac{0.4675atm*8.9L}{0.08206\frac{atm*L}{mol*K}*(81+273.15)K} \\\\n_w=0.143molH_2O\\\\m_w=0.143molH_2O*\frac{18.02gH_2O}{1molH_2O} =2.6gH_2O[/tex]

Best regards!

Answer:

the answer is the last one , sorry if im wrong.

Explanation:

Given-

Hydrogen ion concentration pH = 0.008

Now,

we know that pH + pOH = 14

pOH = 14-0.008

pOH = 13.992

Answer:

25.42 grams

Explanation:

The specific heat of water is 4.18 J/g •°C, so that means that it takes 4.18 joules of energy to raise one gram of water 1 °C.

Change in temp = 55 - 15 = 40°C

So we can calculate how much energy it would take to raise the temp of one gram of water by one degree using the following

(4.18 J/g•°C) * (40°C) * (1 gram) = 167.2 J

So if it takes 167.2 J of energy to raise on gram of water 40°C, we now we can calculate the amount of grams of water that can heated with 4250 J of energy

(4250 J) ÷ (167.2 J) = 25.42 grams of water can be heated from 15°C to 55°C

Answer: The standard state refers to 1 atm and [tex]25^{o}C[/tex].

Explanation:

It is known that a chemical/substance can either be present in a solid, liquid or gaseous state.

So, when the phase of a substance like solid, liquid or gas is present at 1 atmosphere pressure and at a temperature of [tex]25^{o}C[/tex] then it known as standard state of substance.

Thus, we can conclude that standard state refers to 1 atm and [tex]25^{o}C[/tex].

65.38 u (or g)

I just searched it up

Answer: I believe the answer is d)  the rock crumbles at an ocean ridges

Explanation:

Answer:

A-Sphalerite + Dioxygen+Zinc Oxide+Sulfur Trioxide

B-Sodium+Magnesium+Sodium iodide

Explanation:

Heyyy love good luck i may be wrong on letter B so if it is thats my bad but A should be correct :)

Answer:

1600J

Explanation:

1 mole of oxygen gas (O2) has a mass of 32g i.e. the molar mass = 32g/mol

Kinetic energy (K.E) = ½ × m × v²

Where;

m = mass (g)

v = speed or velocity (m/s)

From the information given in this question;

m = 32g

V = 10m/s²

K.E = ½ × 32 × 10²

K.E = 16 × 100

K.E = 1600J

Answer: An object's gravitational force depends primarily on the object's mass.

Explanation:

According to the Universal law of gravitation, every object whether is it is having large r small mass tends to exert a force on every other object, therefore this force is known as gravitational force.

Formula to calculate gravitational force is as follows.

[tex]F = \frac{G \times m_{1} \times m_{2}}{r^{2}}[/tex]

where,

F = Gravitational force

G = Gravitational constant = [tex]6.674 \times 10^{-11} m^{3}/kg s^{2}[/tex]

[tex]m_{1}[/tex] = mass of object 1

[tex]m_{2}[/tex] = mass of object 2

r = distance between the centers of the objects

Therefore, it means that gravitational force of an object primarily depends on an object's mass.

Thus, we can conclude that an object's gravitational force depends primarily on the object's mass.

Answer:

See Explanation

Explanation:

When a constraint such as a change in temperature, concentration or pressure is imposed on a reaction system in equilibrium, the system will readjust itself in such a way as to annul the constraint. This readjustment occurs when the equilibrium position shifts towards the left or right in order to annul the constraint.

a. increasing the concentration of CO: When the concentration of CO is increased, the equilibrium position shifts to the right in order to annul the constraint. This means that more CO2 is produced in the system while the concentration of CO and O2 are decreased until equilibrium is reestablished.

b. decreasing the amount of O2: When the amount of O2 is decreased, the equilibrium position will shift to the left and more CO and O2 are produced while the concentration of CO2 decreases until equilibrium is reestablished.

c. decreasing the the volume of the system: When the volume of the system is decreased, the equilibrium position shifts towards the right hand side where there is less total volume. Hence the concentration of CO and O2 decreases while the concentration of CO2 increases.

Answer:

B

Explanation:

The appropriate diagram of the question is shown in the first image attached below.

From the diagram, we see the reaction of Cyclopentanol taking place under Tscl pyridine. We are to show the reaction mechanism and determine from the options, which appropriate product fits in.

So, from the reaction, the hydroxyl substituent reacts with Tscl where cl is being lost. This process is followed by an attack of N substituent on the pyridine with the Hydrogen atom and cleaves off for the structure to form a stable structure. The stereochemistry of the compound remains unchanged and it maintains its stick formula.

Thus, X is the appropriate and the correct product.

Answer:

We often want to decrease the rates of certain reactions rather than speeding them up. For example, to prolong the shelf lives of certain foods, the chemical reactions by which they spoil must be slowed down.

Answer:

1. [H⁺] = 2.0×10¯¹¹ M

2. [OH¯] = 4.8×10¯⁴ M

3. pOH = 3.3

4. pH = 10.7

Explanation:

From the question given above, the following data were obtained obtained:

Molarity of Ca(OH)₂ = 0.00024 M

We'll begin by calculating the concentration of the hydroxide ion [OH¯]. This can be obtained as follow:

Ca(OH)₂ (aq) —> Ca²⁺ + 2OH¯

From the balanced equation above,

1 mole of Ca(OH)₂ produced 2 moles of OH¯.

Therefore, 0.00024 M Ca(OH)₂ will produce = 2 × 0.00024 = 4.8×10¯⁴ M OH¯

Thus, the concentration of the hydroxide ion [OH¯] is 4.8×10¯⁴ M

Next, we shall determine the pOH of the solution. This can be obtained as follow:

Concentration of the hydroxide ion [OH¯] = 4.8×10¯⁴ M

pOH =?

pOH = –Log [OH¯]

pOH = –Log 4.8×10¯⁴

pOH = 3.3

Next, we shall determine the pH of the solution. This can be obtained as follow:

pOH = 3.3

pH =?

pH + pOH = 14

pH + 3.3 = 14

Collect like terms

pH = 14 – 3.3

pH = 10.7

Finally, we shall determine the concentration of hydrogen ion [H⁺]. This can be obtained as follow:

pH = 10.7

Concentration of hydrogen ion [H⁺] =?

pH = –Log [H⁺]

10.7 = –Log [H⁺]

Divide both side by –1

–10.7 = Log [H⁺]

Take the antilog of –10.7

[H⁺] = Antilog (–10.7)

[H⁺] = 2.0×10¯¹¹ M

SUMMARY:

1. [H⁺] = 2.0×10¯¹¹ M

2. [OH¯] = 4.8×10¯⁴ M

3. pOH = 3.3

4. pH = 10.7

Answer:

high use of mineral resources

Explanation:

brainliest pls

Answer: the substance is from an animal source

Explanation:

Answer: Anode: [tex]Pb+SO_4^{2-}\rightarrow PbSO_4+2e^-[/tex]

Cathode: [tex]PbO_2+4H^++SO_4^{2-}+2e^-\rightarrow PbSO_4+2H_2O[/tex]

Overall cell reaction : [tex]Pb+2SO_4^{2-}+PbO_2+4H^+\rightarrow 2PbSO_4+2H_2O[/tex]

Explanation:

Lead storage battery is a secondary cell used in automobiles and invertors. The anode is made up of lead and undergoes oxidation during discharging and cathode is made up of lead oxide and acts as cathode during discharging. The electrolyte used is dilute .

Lead storage battery acts as electrochemical cell while discharging.

Discharging reaction for  Anode:

Discharging reaction for  Cathode: [tex]PbO_2+4H^++SO_4^{2-}+2e^-\rightarrow PbSO_4+2H_2O[/tex]

Overall cell reaction : [tex]Pb+2SO_4^{2-}+PbO_2+4H^+\rightarrow 2PbSO_4+2H_2O[/tex]

A lead storage battery is an energy storage device. At the anode lead and sulfate ion reacts to produce Lead(II) sulfate and release two electrons.

In secondary cells or the recharge-discharge cells during recharge, the positive electrode is the anode, while during discharge cathode is the positive electrode.

The anode (lead) of the cell undergoes an oxidation reaction during the discharge, whereas the lead oxide or the cathode undergoes reduction.

The discharging reaction at the anode of the cell is given as,

[tex]\rm Pb + SO_{4}^{2-} \rightarrow PbSO_{4} + 2e^{-}[/tex]

The discharging reaction at the cathode of the cell is given as,

[tex]\rm PbO_{2} + 4H^{+} + SO_{4}^{2-} + 2 e^{-} \rightarrow PbSO_{4} + 2H_{2}O[/tex]

The overall cell reaction is given as,

[tex]\rm Pb + 2SO_{4}^{2-} + PbO_{2} + 4H^{+} \rightarrow 2PbSO_{4} + 2H_{2}O[/tex]

Therefore, the gain and loss of electrons are represented at the cathode and the anode of the cell.

Learn more about discharge battery here:

https://brainly.com/question/8341588

Answer: It is :B:

Explanation: also sub to technoblade

Answer:

A. Yes

B. The new temperature of the gas is -116 °C

Note: The question is incomplete. The complete question is given below :

For many purposes we can treat butane C H10) as an ideal gas at temperatures above its boiling point of - 1. °C. Suppose the pressure on a 500 mL sample of butane gas at 41.0°C is cut in half. Iyes Is it possible to change the temperature of the butane at the same time such that the volume of the gas doesn't change? yes no If you answered yes, calculate the new temperature of the gas. Round your answer to the nearest °C.

Explanation:

A. According to the pressure law of gases,for a fixed mass of gas the pressure of a gas is directly proportional to its Kelvin temperature once the volume is kept constant. This means that a change in temperature can bring about a change in pressurein a gas at constant volume.

B. From the pressure law of gasese: P1/T1 = P2/T2

Where initial pressure = P1, final pressure = P2

Initial temperature = T1, final temperature = T2

For the butane gas;

P1 = P

P2 = P/2

T1 = 41°C = (273 + 41 ) K = 314 K

T2 = ?

From the equation, T2 = T1 × P2 / P1

T2 = 314 × P/2 /P

T2 = 157 K

T2 = (157 - 273) °C = -116 °C

Therefore, the new temperature of the gas is -116 °C

Answer: Mass is converted to the energy binding a nucleus together.

Explanation: a p e x

Mass is converted to the energy binding a nucleus together cause a mass defect.Hence , Option (C) is correct.

The actual atomic mass is less than the predicted mass calculated by adding the masses of nucleons.

This additional mass is accounted for by binding energy that is released when a nucleus is formed.

When a nucleus is formed, some of the mass is converted to energy and this results in the mass defect.

Therefore, Mass is converted to the energy binding a nucleus together cause a mass defect. Hence , Option (C) is correct.

Learn more about mass defect here ;

https://brainly.com/question/11624098

#SPJ2

Answer: Salt is an ionic compound.

Explanation:

A compound formed by transfer of electrons from one atom to another is called an ionic compound.

For example, chemical formula of salt is NaCl (also called table salt).

Salt is formed when sodium (atomic no. 11) donates its one valence electron to chlorine (atomic no. 17). As a result, sodium ion and chlorine ion chemically combine together and form the compound NaCl.

Thus, we can conclude that salt is an ionic compound.

Answer:

liquid

Explanation:

Adjusting pH in Water

Pure or distilled water has a pH level of 7, which means it is neutral. If you want to increase the pH of water, you must add an alkaline substance, such as baking powder, to it. If you want to decrease the pH of water, you add an acidic substance, such as lemon juice, to it

A buffer can be added to a solution to control the pH. The correct option is c.

PH is potential hydrogen. It is the value of how acidic or alkaline, the solution is.

The pH scale is consisting of 1 to 14 measure numbers, a pH less than 7 is acidic and a pH more than 7 is basic.

A buffer is a solution that maintains the pH of any solution.

Thus, the correct option is C, a buffer.

Learn more about pH

https://brainly.com/question/491373

Answer:

A ⟶ A⁺ + e⁻

AH + B ⟶ A + BH

A + BO ⟶ AO + B

A + e⁻ ⟶ A⁻

A + BH ⟶ AH + B

AO + B ⟶ A + BO

-TheUnknownScientist