Answer:
Acceleration = 3.67 m/s²
Explanation:
In physics, acceleration can be defined as the rate of change of the velocity of an object with respect to time.
This simply means that, acceleration is given by the subtraction of initial velocity from the final velocity all over time.
Hence, if we subtract the initial velocity from the final velocity and divide that by the time, we can calculate an object’s acceleration.
Mathematically, acceleration is given by the equation;
[tex]Acceleration (a) = \frac{final \; velocity - initial \; velocity}{time}[/tex]
Given the following data;
Initial velocity, u = 5 m/s
Final velocity, v = 27
Time, t = 6
To find the acceleration;
Acceleration = (v - u)/t
Acceleration = (27 - 5)/6
Acceleration = 22/6
Acceleration = 3.67 m/s²
A particle is accelerated uniformly from rest, so that after 10 seconds it has achieved a speed of 15 m/s. Find its acceleration.
Answer:
1.5 m/s²
Explanation:
Applying,
a = (v-u)/t ...................... Equation 1
Where a = acceleration of the particle, v = final velocity of the particle, u = Initial velocity of the particle, t = time.
From the question,
Given: u = 0 m/s (From rest), v = 15 m/s, t = 10 seconds
Substitute these values into equation 1
a = (15-0)/10
a = 15/10
a = 1.5 m/s²
PLS ANSWER QUICK I HAVE A COUPLE MINUTES.
An object moves through space with balanced forces acting on it. Which statement
best describes the speed and direction of the object as long as the forces acting on it
remain balanced?
A. The speed and direction of the object will both change.
B. The speed and direction of the object will remain constanti
C. The speed will change, but the direction will remain constant.
D. The speed will remain constant but the direction will change
Answer:
B
Explanation:
Newton's first law of motion states that every object will continue in a state of rest or uniform motion in a straight line unless a resultant force acts on it
balanced force means resultant force is 0N
this means that the speed will not change as it uniform and the direction will not change because it will continue at the same speed in a statight line and direction
sorry man, I think it was late
hope this helps
Can someone help me please??
Which is not true about the role of gravity in the formation of planets?
A. Dust and gas particles that were attracted to each other began to rotate into a protoplanetary disk.
B. Gravity between planetesimals caused them to join together into conglomerate clumps.
C. Our solar system is the only place in the universe where gravity played a key part in the formation of planets.
D. Gravity of larger objects in orbit around the sun attracted, and cleared the orbital path of, smaller planetesimals, gas, and dust.
24. ____
Choose the most accurate description of the dimensions of our solar system:
a. The planets are approximately the same size as each other, and orbit at evenly-spaced distances from the sun.
b. Rocky planets are small, dense, and orbit relatively close to the sun, compared to the Jovian planets, which are large, less dense, and orbiting far from the sun.
c. Rocky planets alternate with gas giants as they orbit at even intervals from the sun
d. Gas planets are small, orbiting relatively close to the sun, while large, dense rocky Giants
orbit the sun at great and varying distances.
25. ____ A new object was discovered in the Kuiper Belt. At 6 billion km from the sun, it could be the newest dwarf planet. How many AU is it from the sun? Use 150,000,000 km as Earth’s orbital distance.
a. 90AU b. 9AU c. 400AU d. 40AU
1. Our solar system is the only place in the universe where gravity played a key part in the formation of planets.
2. Rocky planets are small, dense, and orbit relatively close to the sun, compared to the Jovian planets, which are large, less dense, and orbiting far from the sun.
3. _______
In close pipe resonator high pressure reflects as low pressure
1) True
2) False
Answer:
true
Explanation:
i think it is the answer
As a sound wave changes from one to another, it will often be refracted.A. frequency B. amplitude C. medium D. wavelength?
Answer: the answer is medium
Explanation:
A lamp has a current of 2.0 amperes at 6.0 volts. What is the resistance of lamp?
Answer: B 3.0
Explanation:
help mee with the workk no link please ·ᴗ·
Explanation: It Should Be 30:60 So If You Simplify It Would Be 1:2
(I think it's The answer I don't Know)
when organism dies , the nutrients in its body ?
Answer: are released by the action of decomposers
Explanation:
А
man of mass
77kg stands on a
Spring-weighing
Machine
inside a lift
When the lift starts to ascend, its accel-
eration 2 m/s2. what will be reading on.
the machine?
Explanation:
The reading on the scale is
W = m(g + a)
= (77 kg)(9.8 m/s^2 + 2 m/s^2)
= 908.6 N
How to find resultant of all vectors?
Answer:
To draw the resultant vector, join the tail of the first vector with the second vector's head and put the arrowhead. To determine the magnitude, measure the length of resultant R, and to find out the direction, measure the angle of the resultant with the x-axis.
5. It took 500 newtons of force to push a car 40 meters. How
much work was done?
Answer:
Explanation:
work done=force * displacement
=500 N * 40 m
=2000 joule
List 5/10 qualities/characteristics of what you believe a leader should have and why
Answer:
this is your choice entirely but anyways
professionalism so they don't slack off
respect so they can be respected while treating others with respect
kindness (even if only a little) so they aren't plain out rude
if they're in school, passing grades so they can be taken seriously
role model so they can teach younger people
Explanation:
what is three type of earthquake waves
Answer:primary,secondary and surface waves I do believe
Explanation:
A capacitor has plates of area 5.25 * 10 ^ - 5 * m ^ 2 which are separated by 3.14 * 10 ^ - 6 * m . What is its capacitance?
Answer:
1.47 x 10^-10
Explanation:
Acellus
The capacitance of the given capacitor is approximately 1.4805 × [tex]10^{(-10)[/tex]F.
The capacitance (C) of a capacitor is determined by the formula:
C = (ε₀ ×A) / d
Where:
C is the capacitance
ε₀ is the permittivity of free space (ε₀ ≈ 8.85 × [tex]10^{(-12)[/tex] F/m)
A is the area of the plates
d is the distance between the plates
Given:
Area of the plates (A) = 5.25 × [tex]10^{(-5)[/tex]m²
Distance between the plates (d) = 3.14 × [tex]10^{(-6)[/tex] m
Using the given values, we can calculate the capacitance:
C = (ε₀ ×A) / d
C = (8.85 × [tex]10^{(-12)[/tex] F/m) × (5.25 × [tex]10^{(-5)[/tex] m²) / (3.14 × [tex]10^{(-6)[/tex]m)
Simplifying the expression:
C = (8.85 × 5.25 × [tex]10^{(-12 - 5)[/tex]) / (3.14 × [tex]10^{(-6)[/tex])
C = (46.4625 × [tex]10^{(-17)[/tex]) / (3.14 × [tex]10^{(-6)[/tex])
C = 14.805 × [tex]10^{(-17 - (-6)}[/tex])
C = 14.805 × [tex]10^{(-11)[/tex]
Using scientific notation, capacitance as:
C = 1.4805 × [tex]10^{(-10)[/tex] F
Therefore, the capacitance of the given capacitor is approximately 1.4805 × [tex]10^{(-10)[/tex] F.
To know more about capacitance
https://brainly.com/question/31871398
#SPJ2
Pls help,will give brainliest
Answer:
It would most likly be negitive, but I'm not 100% sure.
Explanation:
Justin mixed two cups of lemon juice and two cups of sugar with a gallon of water in a pitcher. What happened to the lemon juice, sugar, and water?
Answer:
The correct answer is - Lemon juice hydrolyzes sugar and dissolves it faster and creates a solution.
Explanation:
When mixing lemon juice and sugar in water are mixed together, the lemon juice dissolves the sugar faster as it has citric acid that hydrolyzes sucrose molecules of sugar in glucose and fructose.
This mixing of all three lemon juice, water, and sugar form a solution. Here in this solution, water is solvent, and sugar and lemon juice are solutes. The quantity of all three determined the nature of the solution if it will be acidic or more diluted.
It takes 6s for a stone to fall from the top of a building to the ground calculate i.the height of the building ii.the speed of the stone just before it strikes the ground (g=10ms^-2
Answer:
fffffff
Explanation:
What happens to the speed and frequency of a light ray when it passes from glass into water?
The speed decreases and the frequency increases.
The speed decreases and the frequency remains the same.
The speed increases and the frequency increases.
The speed increases and the frequency remains the same.
Answer:
The speed decreases and the frequency remains the same.
Explanation:
Had it for a castle learning assignment, guessed and got it correct.
The speed of a light ray decreases and its frequency remains the same when it passes from glass into water.
What is the speed of light?The speed of light, also known as the velocity of light, is a fundamental constant of nature and is one of the most well-known physical quantities. It is defined as the speed at which electromagnetic radiation (light) travels through a vacuum, which has a constant value of 299,792,458 meters per second (m/s).
This speed is considered to be the fastest that anything can travel in the universe, and it is a critical component in many physical and biological processes. The speed of light is used in a wide range of scientific and technological fields, including optics, electronics, astronomy, and quantum mechanics. It is considered to be a universal constant and does not change with time, distance, or the medium through which it travels.
Learn more about light ray, here:
https://brainly.com/question/13851007
#SPJ6
1 point
1.) Alpha has a surface temperature of 6,700 K and Beta has 17,000 K.
Which star appears more blue?
Answer:
Beta 17,000K, bc warmer is more blue
Plastics are used in millions of objects we use every day. Why are plastics NOT considered natural resources?
A. They are recyclable.
B. They are made by people. C. They are bad for the environment.
D. They are made entirely from nonrenewable resources.
Answer:
letter C. they are bad for the environment
I need help please and thanks
Answer:
4.Given:
m=1000kg
a=(3m/s)^2
F=m×a
=1000×3
=3000N
5.Given:
m=50kg
a=(5m/s)^2
F=m×a
=50×5
=250N
6. Given
F=250N
a=(5m/s)^2
m=?
F=m×a
250N=m×(5m/s)^2
m×(5m/s)^2=250N
m=250N÷(5m/s)^2
m=50kg
PLEASE ACTUAL HELP NO SPAMS OR FALSE ANSWERS
First, evaluate these three models. One represents fission, one fusion, and one radioactive decay. Write three sentences about each one according to the following framework:
---State what reaction the model represents, including what it demonstrates about mass and/or energy.
---State whether you think the model accurately represents the reaction. Explain why or why not.
---Suggest one way to improve the model.
Model A: Two sponge balls representing two atoms are soaked in water. You hold one ball, and your friend holds the other. Then you press the two balls together. As you press them together, water leaks out. What type of reaction does this model represent?
Model B: You draw a tree diagram showing a large atom splitting into two parts and neutrons being released. Your diagram also shows the released neutrons hitting other large atoms, which then each split in two and release more neutrons, which hit more large atoms, and so on. What type of reaction does this model represent?
Model C: You have 100 candies with the letter "M" on one side. You pour the candies into a pan. You count and remove all the candies with the "M" facing upward. Then you shake the pan and again count and remove all the candies with "M" facing upward. You shake, count, and remove candies four more times. What type of reaction does this model represent?
When energy is transferred from system to surrounding then the corresponding reaction known as exothermic reaction in Modle A when we press the ball(atom) the water(energy) is transferred into surrounding hence it is an exothermic reaction.
When a single atom disintegrate to give two or more atom with radioactive substance then the corresponding reaction know as Nuclear Fission reaction. hence Modle B represents Nuclear fission reaction.
The Model C represents Radioactive decay, So in the given example or model the water is playing role of radiation through which we are removing the candies having M on upside.
Thanks for joining brainly community!
Force F=5 N acts to the right
Answer:
Calculations involving forces
The resultant force is the single force that has the same effect as two or more forces acting together.
Two forces in the same direction
Two forces that act in the same direction produce a resultant force that is larger than either individual force.
You can easily calculate the resultant force of two forces that act in a straight line in the same direction by adding their sizes together.
Example
Two forces, 3 N and 2 N, act to the right. Calculate the resultant force.
Two arrows, one above the other, both pointing to the right, one labelled 2 N and one labelled 3 N. Then an equals sign and then another arrow to the right labelled 5 N.
Two forces acting in the same direction
Resultant force F = 3 N + 2 N = 5 N to the right.
The resultant force is 5 N to the right.
Two forces in opposite directions
Two forces that act in opposite directions produce a resultant force that is smaller than either individual force.
To find the resultant force subtract the magnitude of the smaller force from the magnitude of the larger force.
The direction of the resultant force is in the same direction as the larger force.
Example
A force of 5 N acts to the right, and a force of 3 N act to the left.
Calculate the resultant force.
Two arrows, one above the other, one pointing to the left, labelled 2 N, the other pointing to the right labelled 3 N. Then an equals sign, with an arrow to the right labelled 1 N.
Two forces acting in opposite directions
Resultant force F
Resultant force F = 5 N - 3 N = 2 N to the right.
The resultant force is 2 N to the right.
Explanation:
Thanks me later
.,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
what can electromagnetic and mechanical waves not carry?
Answer:
Water ;)
Explanation:
have a great rest of your day :)
The emission spectrums are known for the elements below.
What elements are in the unknown sample?check all that apply
Answer: Hello your question is incomplete, I was able to find the question online but I am unable to attach it due to plagiarism rules
answer : Lithium and Potassium
Explanation:
The elements that are in the unknown sample are : Lithium and Potassium
An Emission spectrum is used to determine the composition of a material and it is distinctively different for each element that us found on the period table
for every 1000 joules or useful energy output, the heater wastes 100 joules, find the input energy of the heater.
Answer:
the Input Energy is 1,100 J
Explanation:
Given;
useful energy, = 1000 J
energy wasted, = 100 J
The total or input energy is given as;
Input Energy = useful energy + energy wasted
Input Energy = 1000 J + 100 J
Input Energy = 1,100 J
Therefore, the Input Energy is 1,100 J
If a cactus is given more water, then it will grow taller. This is because water is important to plant health.
What does the statement above represent?
an experiment
a hypothesis
a theory
a law
Answer:
An experiment
Explanation:
I guess.....
....
.
.
Answer:
a theory
Explanation:
The graph shows the layers of Earth's atmosphere. Which statement best describes the relationship between temperature and altitude in the atmosphere?
A. The relationship between temperature and altitude is variable and unpredictable.
B. Overall, the temperature of the atmosphere increases with altitude.
C. The relationship between temperature and altitude is different in each zone of the atmosphere.
D. Temperature decreases with altitude until the stratosphere is reached, and then it increases from there.
Answer:
The best statement which describe this is actually:
D. Temperature decreases with altitude until the stratosphere is reached, and then it increases from there.
Explanation:
From the graph shown, it could be seen that, temperature decrease with height. The higher the height, the lower the temperature. For example, from the graph, when the height was around 50 km, the temperature was within the range of -10⁰C to 0⁰C. On the other hand, when the height increases around 78 km, the temperature decreases to the range of to -70 ⁰C to -80⁰C
A 12.0 kg object is stationary on a surface that is inclined 30.0° relative to the horizontal. The coefficient of friction is 0.65. Use a free body diagram to determine the magnitude of the force of static friction on the block.
Help please?
Answer:
hope you can understand the calculations