please help
a girl pulls a wheeled suitcase with a force of 3N. If the suitcase has a mass of 6 kg, what is the acceleration?

Answer:

I think it might be 8kg grams because it is bigger

Answer:

The uniy which is accepted all over the world is called SI unit.

Explanation:

The system of measurement that is agreed by the international convention if scientists that is held in paris of France to adopt an international unit is called SI unit unit.

Answer:

=>8x+9x+5+3

=>8x+9x+5+3=>17x+8

Answer:

The answer is "telescopes".

Explanation:

Throughout ancient times, astronomical observatories have indeed been available, and so many historical locations were reserved for astronomical observations. All contemporary astronomers lacked within those older telescopes were lenses until 1610. A telescope is indeed an instrument used to view far-off objects. Telescopes often are being used to look at planets and stars.

Answer:

60 °C

Explanation:

From the question given above, the following data were obtained:

Mass of 1st sample (M₁) = 200 g

Temperature of 1st sample (T₁) = 80 °C

Mass of 2nd sample (M₂) = 100 g

Temperature of 2nd sample (T₂) = 20 °C

Equilibrium temperature (Tₑ) =?

NOTE: Since the sample are the same, the specific heat capacity is constant.

We can obtain the equilibrium temperature as follow:

Heat lost by 1st = heat gained by the 2nd

M₁C(T₁ – Tₑ) = M₂C(Tₑ – T₂)

Cancel out C

M₁(T₁ – Tₑ) = M₂(Tₑ – T₂)

200 (80 – Tₑ) = 100 (Tₑ – 20)

Clear bracket

16000 – 200Tₑ = 100Tₑ – 2000

Collect like terms

16000 + 2000 = 100Tₑ + 200Tₑ

18000 = 300Tₑ

Divide both side by 300

Tₑ = 18000 / 300

Tₑ = 60 °C

Therefore, the equilibrium temperature (i.e the final temperature) of the mixture is 60 °C.

Answer:

Increases

Explanation:

In the Compton scattering experiment with x-rays,

The change in operation

[tex]\Delta \lambda = \frac{h}{m_oc} [1-cos\theta][/tex]

Now rest being constant, as \theta increases, cos\theta decreases

Hence, The change in wavelength will increase with the increase in \theta.

Hence, wavelength increases with an increase in the angle of scatttering.

Answer:

Waves are disorders that travel through a fluid medium. Several simple wave features include frequency, period, wavelength, and amplitude.

Explanation:

a = ( v(2) - v(1) ) ÷ ( t(2) - t(1) )

2 = ( v(2) - 10 ) ÷ ( 6 - 0 )

2 × 6 = v(2) - 10

v(2) = 12 + 10

v(2) = 22 m/s

The distance of the object from the mirror Is = –8 cm

The image distance from the mirror = –1.60cm

The magnification of the image = 0.20

The distance of the object from the mirror can be calculated using the formula below:

magnification= – image distance/ object distance

Substitute the available values into the equation above,

0.20 = – 1.60/ X

Make X the subject of formula,

X = – 1.60/0.20

X = – 8cm

The negative sign indicates that the image is virtual which is formed behind the mirror.

Therefore, the distance of the object from the mirror Is = –8 cm.

Learn more about mirror equations here:

https://brainly.com/question/26257987

Answer:

false

Explanation:

Answer:

true

Explanation:

Space is not a medium. and we can not her anything in space. therefore you need a medium in order to hear sound waves.

Answer:

False

Explanation:

parts that are smaller than protons neutrons and electrons

Answer:

a.  9.99625 cm b. 68 °C

Explanation:

(a) What is the length of the rod at the freezing point of water (0 0C)?

Before we find the length of the rod, we need to find the coefficient of linear expansion, α = (L - L₀)/[L₀(T - T₀)] where L₀ = length of rod at temperature T₀ = 10.0 cm, T₀ = 20 °C, L = length of rod at temperature T = 10.015 cm and T = 100 °C

Substituting the values of the variables into the equation, we have

α = (L - L₀)/[L₀(T - T₀)]

α = (10.015 cm - 10.0 cm)/[10.0 cm(100 °C - 20 °C)]

α = 0.015 cm/[10.0 cm × 80 °C]

α = 0.015 cm/[800.0 cm °C]

α = 0.00001875 /°C

We now find the length L₁ at T₁ = 0 °C from

L₁ = L₀(1 + α(T₁ - T₀))

So, substituting the values of the variables into the equation, we have

L₁ = L₀(1 + α(T₁ - T₀))

L₁ = 10.0 cm[1 +  0.00001875 /°C(0° C - 20 °C)]

L₁ = 10.0 cm[1 +  0.00001875 /°C × -20° C]

L₁ = 10.0 cm[1 - 0.000375]

L₁ = 10.0 cm[0.999625]

L₁ = 9.99625 cm

(b) What is the temperature if the length of the rod is 10.009 cm?

With length L₃ = 10.009 cm at temperature T₃, using

L₃ = L₀(1 + α(T₃ - T₀))

making T₃ subject of the formula, we have

L₃/L₀ = 1 + α(T₃ - T₀)

L₃/L₀ - 1 = α(T₃ - T₀)

T₃ - T₀ = (L₃/L₀ - 1)/α

T₃ = T₀ + (L₃/L₀ - 1)/α

substituting the values of the variables into the equation, we have

T₃ = 20 °C + (10.009 cm/10.0 cm - 1)/0.00001875 /°C

T₃ = 20 °C + (1.0009 - 1)/0.00001875 /°C

T₃ = 20 °C + 0.0009/0.00001875 /°C

T₃ = 20 °C + 48 °C

T₃ = 68 °C

Answer:

28Nm

Explanation:

Torque is expressed as the prduct of force and radius

Given

Force = 140N

radius  = 0.20m

Torque = 140 * 0.2

Torque = 140 * 1/5

Torque = 28Nm

Hence the amouunt of torque applied is 28Nm

Answer:

   i = 1.09 10⁴ A

Explanation:

For this exercise we will look for the resistance of the wire

          R = ρ L / a

the area of ​​the wire is

          a =ππ r² = π πd² / 4

we substitute

         R = ρ L 4 / π d²

          R = 1.72 10⁻⁸   20  4/π 8 10⁻⁴

         R = 5.47 10⁻⁴ Ω

to calculate the current we use ohm's law

           V = R i

            i = V / R

            i = 6 / 5.47 10⁻⁴

            i = 1.09 10⁴ A

Answer: hello the options related to your question is missing attached below are the missing options

answer : The molecules with the highest temperature will bounce off their neighbors, losing energy to them and so on until the system is at a new equilibrium with the piston moved out  ( option B )

Explanation:

What best describes the situation of what will happen next as explained in the question is in Option B

Because molecules with higher temperatures will always posses higher kinetic energy and they will collide more frequently with surrounding molecules passing on their energy in the process until the energy gets to the molecules closest to the piston. The molecules closest to the piston will then hit the piston until a new equilibrium is achieved

Answer:

Explanation:

Equivalent resistance of parallel combination of two resistors of 3 ohms and 4 ohms .

R₁ = 3 x 4 / ( 3 + 4 )

= 12 / 7 = 1.7 ohms .

This equivalent resistance is connected with 4 ohms in series

Total resistance = 1.7 ohms + 4 ohms

= 5.7 ohms.

Hence effective resistance of the circuit = 5.7 ohms .

Answer:

Explanation:

[tex]a = \frac{v_f-v_0}{t}[/tex] which is the final velocity minus the initial velocity in the numerator, and the change in time in the denominator.  For us:

[tex]a=\frac{2.7-1.6}{1.2}[/tex] so

a = .92 m/s/s (NOT negative because you're speeding up)

Answer:

Explanation:

That is a fun question!

Without a hot radiating core like Earth, Mars will have very different geological and seismic events. The Mars core will be relatively cold and there will not be any molten magma. So Mars will not have earthquakes or volcano activities. Both only occur when there is magma flowing or tectonic plate motion and they will not occur with a cold core.

Answer:

Explanation:  

Answer:

b. Because the southern pole of the Earth's magnet is in the north.

Explanation:

This is very weird to think about but Earth's southern magnetic pole is in Earth's geographic north. So when compass points north, it is actually getting attracted to the southern magnetic pole (that is actually located in the north direction- geographic location- in earth).

Answer:

220 A

Explanation:

The magnetic force on the floating rod due to the rod held close to the ground is F = BI₁L where B = magnetic field due to rod held close the ground = μ₀I₂/2πd where μ₀ = permeability of free space = 4π × 10⁻⁷ H/m, I₂ = current in rod close to ground and d = distance between both rods = 11 mm = 0.011 m. Also, I₁ = current in floating rod and L = length of rod = 1.1 m.

So, F = BI₁L

F = (μ₀I₂/2πd)I₁L

F = μ₀I₁I₂L/2πd

Given that the current in the rods are the same, I₁ = I₂ = I

So,

F = μ₀I²L/2πd

Now, the magnetic force on the floating rod equals its weight , W = mg where m = mass of rod = 0.10kg and g = acceleration due to gravity = 9.8 m/s²

So, F = W

μ₀I²L/2πd = mg

making I subject of the formula, we have

I² = 2πdmg/μ₀L

I = √(2πdmg/μ₀L)

substituting the values of the variables into the equation, we have

I = √(2π × 0.011 m × 0.1 kg × 9.8 m/s²/[4π × 10⁻⁷ H/m × 1.1 m])

I = √(0.01078 kgm²/s²/[2 × 10⁻⁷ H/m × 1.1 m])

I = √(0.01078 kgm²/s²/[2.2 × 10⁻⁷ H])

I = √(0.0049 × 10⁷kgm²/s²H)

I = √(0.049 × 10⁶kgm²/s²H)

I = 0.22 × 10³ A

I = 220 A

Answer:

The parent nucleus splits into lighter daughter elements

Explanation:

Nuclear fission involves the splitting of nucleus of a lighter element with smaller particles

Answer:

The larger the amplitude of the waves, the louder the sound. Pitch (frequency) – shown by the spacing of the waves displayed. The closer together the waves are, the higher the pitch of the sound.

Explanation:

Answer:

your correct ans is D.

object float in liquid when its density is less than liquid and sinks when its density is more than liquid..

Answer:

3.504 MeV

Explanation:

Given that;[tex]\frac{A}{Z} X ---->\frac{A-4}{Z-2} Y +\alpha + Q[/tex]

Also;

[tex]Q= KE_{\alpha } (M_{Y} + M_{\alpha } /M_{Y[/tex])

Mass number of X = 229

Mass number of Y = 225

Mass number of alpha particles = 4

Kinetic energy of alpha particles = 3.443 MeV

Q = 3.443 MeV (225 + 4/225)

Q= 3.504 MeV

Answer:

B - Person A's chair rolls backwards.

Explanation:

This can be seen simply through the Conservation of Momentum. When the ball is thrown to be, the ball's momentum(+m) is transfererd to B, so B's chair moves forward(think about it - it makes sense, doesn't it?), meaning A's chair moves backwards.

So, B.

EXTRA TIP: Try drawing a diagram to help you!  

Answer:

Potential difference, V = -0.000224 Volts

Explanation:

Given the following data;

Quantity of charge = 6.93*10-4 C

Energy = -3.09 J

To find the electric potential V at that point?

Mathematically, the energy transferred per unit of charge is given by the formula;

E = QV

Where:

E is the energy

Q is the quantity of charge

V is the potential difference.

Substituting into the formula, we have;

[tex] -3.09 = 6.93*10^{-4} * V [/tex]

[tex] V = \frac {6.93*10^{-4}}{-3.09} [/tex]

Potential difference, V = -0.000224 Volts

Answer:

a) 3.9 x 10⁻⁵ kg

Explanation:

The amount of mass required to produce the energy can be given by Einstein's formula:

[tex]E = mc^2\\\\m = \frac{E}{c^2}[/tex]

where,

m = mass required = ?

E = Energy produced = 3.5 x 10¹² J

c = speed of light = 3 x 10⁸ m/s

Therefore,

[tex]m = \frac{3.5\ x\ 10^{12}\ J}{(3\ x\ 10^8\ m/s)^2} \\\\m = 3.9\ x\ 10^{-5}\ kg[/tex]

Hence, the correct option is:

a) 3.9 x 10⁻⁵ kg

Answer: A roller coaster does not have an engine to generate energy. The climb up the first hill is accomplished by a lift or cable that pulls the train up. This builds up a supply of potential energy that will be used to go down the hill as the train is pulled by gravity

Hope this helps! Good luck with future homework and exams!