Answers
Answer:
The last one
Explanation:
Answer:
The dotted line from the earth to the moon represents your line of sight when looking at the moon. ... So the basic explanation is that the lunar phases are created by changing angles (relative positions) of the earth, the moon and the sun, as the moon orbits the earth
Explanation:
Related Questions
A stun gun or TASER is designed to put out a few seconds worth of electric pulses that impress a
voltage of about 1200 V across the human body. This results in an average current of approximately 3
mA into a human body. Using these figures, estimate the resistance of the human body.
Answers
Answer:
Resistance = 400000 Ohms
Explanation:
Given the following data;
Voltage = 1200 V
Current = 3 mA = 3/1000 = 0.003 A
To find the resistance;
Voltage = current * resistance
Resistance = 1200/0.003
Resistance = 400000 Ohms
Polarization is the action of restricting the vibrations of a transverse wave wholly or partially to one direction.
O True
O False
Answers
A wave is moving at 300m/s and has a frequency of 25Hz, what is the wavelength?
Answers
Answer:
12 metre
Explanation:
Wavelength = Velocity / Frequency
Wavelength = 300m/s / 25 Hz
Wavelength = 12 metre
Which type of wave is a combination of two waves?
Answers
Answer:
A composite wave
Answer:
surface waves
Explanation:
how do atoms relate to the periodic table?
Answers
Answer:
The organization of electrons in atoms explains not only the shape of the periodic table but also the fact that elements in the same column of the periodic table have similar chemistry. The same concept applies to the other columns of the periodic table.
what's the main function for the human digested system
Answers
Answer:
The function of the digestive system is digestion and absorption. Digestion is the breakdown of food into small molecules, which are then absorbed into the body.
Explanation:I hope it helped
Here's a riddle for you guys is it an orange because it taste's like an orange or is it an orange cuz it looks like an orange? and don't say both just think about it for a sec it confusing
Answers
Answer:
It tastes like an orange, I don't think that you can replicate taste as much as looks, I could be wrong though. But yes it is confusing.
Explanation:
Can I have brainliest? It would help me out, if not thanks anyways! Please tell me if you need me to elaborate more or show work!! I hope this helped and have a nice day!
(PLESE HELP) why does boiling pot of water have more temperature that an iceberg
Answers
An increase in population growth __________ the need for natural resources for survival.
A. increases
B. decreases
C. prevents
D. has no effect on
Answers
Answer:
A. increases
Explanation:
with more mouths to feed, you need more food, but when your food doesn't increase with your population, then there is a food shortage.
Un tubo cilindrico hueco de cobre mide 3 m de longitud tienen un diametro exterior de 4cm y un diametro interior de 2 cm¿cuanto pesa?
Answers
Answer:
W = 9.93 10² N
Explanation:
To solve this exercise we must use the concept of density
ρ = m / V
the tabulated density of copper is rho = 8966 kg / m³
let's find the volume of the cylindrical tube
V = A L
V = π (R_ext ² - R_int ²) L
let's calculate
V = π (4² - 2²) 10⁻⁴ 3
V = 1.13 10⁻² m³
m = ρ V
m = 8966 1.13 10⁻²
m = 1.01 10² kg
the weight of the tube
W = mg
W = 1.01 10² 9.8
W = 9.93 10² N
Mr Mann cut a cucumber. Mr Mann said, you have performed a chemical change. Is he right?
Answers
Answer:
No.
Explanation:
The cut cucumber is still a cucumber.
Answer:
Nope.
Explanation:
Chemical change is transforming the cucumber into a pickle. However, you need vinegar, so it isn't a full change.
Therefore, Mr. Mann would not be right either way, because all he did was cut a cucumber, and he should probably get some help with all this "chemical change".
Which use of iron is due to its chemical properties?
Answers
.A person pushes a heavy cabinet across a level wooden floor. Force X is the force required to start the
cabinet moving. Force Y is the force required to maintain a slow, steady forward motion.
Which of the following statements describes the two forces, X and Y?
O
A. Force X is added to force Y
B. Force X is less than force Y
C. Force X is unrelated to force Y
O
D. Force X is greater than force Y
Answers
Answer:
A because both force are required to move the cabinet . force x to make sure the movement also force y to make sure it moves in directed motion
Which is a benefit of a scientific model?
A.) It provides a complete image of the concept it is modeling.
B.) It provides an accurate scale of the concept it is modeling.
C.) It provides an accurate visual representation of the texture and coloring of the concept it is modeling.
D.) It provides a useful understanding of the concept it is modeling.
Answers
9. How is spring potential energy determined from a force versus position graph?
Answers
Answer: The potential energy associated with a mass attached to a spring depends on how much the spring is stretched or compressed. ... The gravitational force on the mass is −mg (“−” because the force points down). The force is the negative of the slope on the potential energy versus position graph.
Explanation:
:)
By getting the data from the graph of force versus displacement we can calculate the Potential energy of the spring.
What will be the potential energy?As we know that potential energy is defined as the energy possessed by the body due to its position with respect to other positions.
For an example the potential energy of an object if it is placed at height h will be due to the gravitational acceleration of the earth and is given by [tex]PE=mgh[/tex]
Similarly, for a spring-mass system, the potential energy will be due to the weight of the mass that will be the force exerted by the mass on the spring so there will be an extension in the spring.
So this extension will be found out by the force and displacement graph as the position of the mass attached to the spring goes down so the potential energy can be calculated as the
[tex]PE= F\times X[/tex]
[tex]F=mg[/tex] weight of the mass
X= deflection of the spring
Thus by getting the data from the graph of force versus displacement we can calculate the Potential energy of the spring.
To know more about potential energy follow
https://brainly.com/question/24933254
25. A car with mass M traveling at speed V has kinetic energy K. What is the kinetic energy of a second car that has the 1/4 times the mass M (1/4 smaller) and twice the speed V (2 x larger) of
the first car?
O 2K
OK
08K
O 4K
Answers
Answer: 4k
Explanation: I got it right
How do humans depend on geochemical cycles?
A. to provide clean water, breathable air, and soil that is capable of supporting crops.
B. to provide food and oxygen so organisms can survive
C. to help conserve resources for future use
Answers
Answer:
A
Explanation:
Because we need clean water to obtain a healthy diet, need oxygen which plants provide through photosynthesis and soil is important for food.
What is produced by AC and DC generators?
A. mechanical energy
B. chemical energy
C. electrical energy
Answers
Answer:
I'm positive the Answer to this would be C :)
Which statement is correct about the equation for work?
O work = force x distance
work = fulcrum x distance
O work = force x direction
Answers
Answer:
work equal to Force times distance
What would be the effect of an increase in greenhouse gas concentration in the atmosphere on Earth's average temperatures?
Answers
Answer:
See Explanation
Explanation:
Greenhouse gases are those gases that are believed to trap infrared rays close to the earth surface. Infrared radiation is otherwise known as heat rays due its heating effect.
Increase in the concentration of these greenhouse gases will ultimately lead to a gradual increase in the earth's average temperature. This phenomenon is referred to as global warming.
A car has a speed of 20 m/s. If the speed of the car increases to 30 m/s in 5 seconds, what is the car’s acceleration?
Answers
2
Explanation:
2 times 5 is 10/ 20+10=30
the shock absorbers in a car act as a big spring with k= 21900 N/m. when a 92.5 kg person gets in, how far does the spring stretch?
Answers
Answer: 0.04139m
Explanation:
First, we need to calculate the weight of the man which will be:
Weight = mass × acceleration due to gravity
Weight = mg
Weight = 92.5 × 9.8
Weight = 906.5N
Then, we calculate the force which will be:
F = kx
mg = kx
x = mg/k
x = 906.5/21900
x = 0.04139m.
The spring stretched for 0.04139m.
A ball experiences forces of 14 N [N] and 9.2 N [W]. A Free Body diagram is required. What is the acceleration of the ball if its mass is 225 g?
Answers
Answer:
First, we can define the North as the positive y-axis, and the East as the positive x-axis.
Here we have two forces:
F₁ = 14N to north
F₂ = 9.2 N to west.
Then the free body diagram will be the one that can be seen below:
Now we want to find the acceleration that the ball experiences if the mass is 225g
Knowing that 1k = 1000g, we can rewrite the mass as:
M = 0.225g
Here we also need to remember the second Newton's law:
F = M*a
Net force equals mass times acceleration.
First, let's find the net force:
F = F₁ + F₂ = 14N*(0, 1) + 9.2N*(-1, 0 )
F = (-9.2N, 14N)
The module of the force is then:
I F I = √( (-9.2N)^2 + (14N)^2) = 16.75 N
Then the acceleration is given by
16.75 N = 0.225kg*a
(16.75 N)/(0.225 kg) = a = 74 m/s^2
When you are describing the rate that a race car goes around a track, should you use the term speed or velocity to describe the motion
Answers
Answer:
Speed
Explanation:
Speed is a description of how fast an object moves; velocity is how fast and in what direction it moves. In physics, velocity is the speed in a given direction.
Answer:
speed
Explanation:
Speed is a description of how fast an object moves; velocity is how fast and in what direction it moves. In physics, velocity is speed in a given direction. When we say a car travels at 60 km/h, we are specifying its speed. When we say a car moves at 60 km/h to the north, we are specifying its velocity.
Consider three point charges, q1 = 4.50 C, q2 = 4.50 C, and q3 = 6.30 C, located at the corners of an isosceles triangle. The charges q1 and q2 are 5.00 m apart and form the base. The triangle is 3.50 m high, and q3 is located at the top. Calculate the magnitude and direction of the resultant force on q3.
Answers
Answer:
See explanation below
Explanation:
In this case, let's draw the triangle so we can see how the resultant force would be.
In the picture below, you have the drawn, and the procedure to solve this.
Hope this helps
i will give 50 pts and brainliest
Please helpp!!!!
What do you think we need to do to minimize climate changes growing impact?
Answers
Answer:
Limiting the use of fossil fuels such as oil, carbon and natural gas and replacing them with renewable and cleaner sources of energy, all while increasing energy efficiency
Explanation:
A 4.03 x 10-5 F capacitor stores 5.15 x 10-3 J of energy. What is the voltage across the capacitor?
Answers
Answer:
V = 0.06255 Volts
Explanation:
Given the following data;
Capacitance = 4.03 * 10^{-5} F
Energy = 5.15 * 10^{-3} J
To find the voltage across the capacitor;
Mathematically, the energy stored in a capacitor is given by the formula;
E = ½cv²
Where;
C is the capacitor
E is the energy stored
v is the voltage.
Substituting into the formula, we have;
5.15 * 10^{-3} = ½ * 4.03 * 10^{-5} * v²
0.00515 = 0.00002015 * v²
V² = 0.00002015/0.00515
V² = 0.003912
Taking the square root of both sides, we have;
V = √0.003912
V = 0.06255 Volts
Answer:
16 V
Explanation:
someone said 16 V in the comments and it is the correct answer for acellus.
What is the net force in the following diagram?
Answers
If the distance between the magnets tripled what would happen to the force between the 2 magnets?
Answers
Answer:
Our Repelling Force Magnet Calculator shows the repelling force on a magnet that happens when another magnet of the same size is placed at some distance from it, with like poles facing one another. The force depends on the distance between the magnets. The farther apart the magnets are, the weaker the force.
Explanation:
What is the importance of centre of curvature in spherical mirror?
Answers
Answer:
Rays of light parallel to the principal axis of a concave mirror will appear to converge on a point in front of the mirror somewhere between the mirror's pole and its center of curvature. That makes this a converging mirror and the point where the rays converge is called the focal point or focus .
Explanation:
hopefully that helps you
Answer:
Rays of light parallel to the principal axis of a concave mirror will appear to converge on a point in front of the mirror somewhere between the mirror's pole and its center of curvature. That makes this a converging mirror and the point where the rays converge is called the focal point or focus .
Explanation:
Hope you have a good day :)