please answer it I will mark it brainliest​

Please Answer It I Will Mark It Brainliest

Answers

Answer 1

Explanation:

1) If you spot something you think might be hazardous in your workplace, report it to your employer and safety rep straight away. Your employer should then decide what harm the hazard could cause and take action to eliminate, prevent or reduce that harm. Read more about risk assessments .

2) Complex hazards are understood as various combinations of sources of hazards that lead to the accident occurrences. ... The term "natural-technological" applies to both human-induced intensification of natural risks and any accidents in the technosphere triggered by natural processes or phenomena.

3)Risk Evaluation : To determine who may be harmed. Risk Control : Taking preventive measures to control the impact of risk.

In general, to do an assessment, you should:

Identify hazards.

Determine the likelihood of harm, such as an injury or illness occurring, and its severity. ...

Identify actions necessary to eliminate the hazard, or control the risk using the hierarchy of risk control methods.

Answer 2
A hazard is something that can cause harm, e.g. electricity, chemicals, working up a ladder, noise, a keyboard, a bully at work, stress, etc. A risk is the chance, high or low, that any hazard will actually cause somebody harm.



Risk Identification : It is a process of characterizing hazards. Risk Analysis : A process of determining the impact of risk. Risk Evaluation : To determine who may be harmed.

Related Questions

VERY EASY QUESTION FOR HIGH SCHOOL STUDENTS:
Which of the following frequencies would you expect a young person to be able to hear? 500 Hz, 6000 Hz, 25000 Hz, 15 Hz, 15000 Hz ​

Answers

Answer:

Explanation: 6000z

g A 24-gg bullet strikes and becomes embedded in a 1.50-kgkg block of wood placed on a horizontal surface just in front of the gun. Part A If the coefficient of kinetic friction between the block and the surface is 0.23, and the impact drives the block a distance of 9.5 mm before it comes to rest, what was the muzzle speed of the bullet

Answers

The muzzle speed of the bullet before the collision is 415.3 m/s.

The given parameters:

Mass of the bullet, m₁ = 24 gMass of the wood, m₂ = 1.5 kgCoefficient of kinetic friction, μk = 0.23Distance traveled by the block before stopping, d = 9.5 m

Apply the principle of work-energy theorem to determine the final velocity of the block-bullet system;

[tex]F_f \times d = \frac{1}{2} mv^2\\\\\mu_k F_n \times d = \frac{1}{2} mv^2\\\\\mu_ k (m_1 + m_2)g \times d = \frac{1}{2} (m_1 + m_2)v^2\\\\\mu_k g \times d= \frac{1}{2} v^2\\\\2\mu _k gd = v^2\\\\v= \sqrt{2\mu _k gd } \\\\v = \sqrt{2 \times 0.23 \times 9.8 \times 9.5} \\\\v = 6.54 \ m/s[/tex]

Apply the principle of conservation of linear momentum to determine the muzzle speed of the bullet;

[tex]m_1 u_1 \ + \ m_2u_2 = v(m_1 + m_2)\\\\0.024(u_1) \ + \ 1.5(0) = 6.54(0.024 + 1.5)\\\\0.024u_1 = 9.967\\\\u_1 = \frac{9.967}{0.024} \\\\u_1 = 415.3 \ m/s[/tex]

Thus, the muzzle speed of the bullet before the collision is 415.3 m/s.

Learn more about conservation of linear momentum here: https://brainly.com/question/7538238

I'm reasking this because I keep getting links not a real answer and I need a proper answer soon please

Answers

Answer:

Adding salt to the water increases the density of the solution because the salt increases the mass without changing the volume very much.

Explanation: the explanation is in a file

Can someone help me solve this problems please? It's a physics problem.

Answers

Answer:

i cant see

Explanation:

but im smart

Would it be possible to predict the speeds that a coaster will reach before it’s ever placed on the track?

Answers

Yes, it's possible to predict the speeds that a coaster will reach before it’s

ever placed on the track.

This is usually calculated with the potential energy which is

Potential energy = m g h

where m is mass, g is acceleration due to gravity and h is height.

The given formula above is used in predicting the speeds that a coaster will

reach before it’s ever placed on the track.

Read more about Speed here https://brainly.com/question/14298262

the conduction of heat from hot body to cold body is an example of what thermodynamics process?

Answers

Answer:

Heat flow

Explanation:

That’s easy please tell me!

Answers

Uhh 3 seconds? i think

The 0.01 kg marble is dropped from rest at A through the smooth glass tube and accumulate in the basket at C as shown in Figure Q2(b). Determine: i) the velocity of the marble at B ii) the horizontal distance R of the basket from the end of the tube, and iii) the speed at which the marble falls into the basket.​

Answers

Crazy Wally Ok Ok ok hhahahaha

Someone help me please !!!! Will mark Brianliest !!!!!!!!!!!!!!!!

Answers

The answer is the second one, because in exothermic reactions energy is released.

1. The acceleration equation of a certain particle is a=2t, after 4s, its velocity reaches 20m/s, then the initial velocity of the particle movement is ) ms B Sms 2.​

Answers

Answer:

Change in velocity is the integral of all the differential accelerations acting over the period of acceleration.

[tex]20 = u + \int\limits^4_0 {2t} \, dt[/tex]

20 = u + t²[tex]\left \{ {{4} \atop {0}} \right.[/tex]

20 = u + 4² - 0²

20 = u + 16

u = 4 m/s

A 2.98-kg object oscillates on a spring with an amplitude of 8.05 cm. Its maximum acceleration is 3.55 m/s2. Calculate the total energy.

Answers

Answer:

a = ω^2 A      formula for max acceleration (ignoring sign)

V = ω A         formula for max velocity

V^2 = ω^2 A^2 = a A   from first equation

E = 1/2 M V^2 = 1/2 * 2.98 * 3.55 * .0805 = .426 J

(kg * m/sec^2 * m = kg m^2 / sec^2 = Joule

what is the speed of a boy moving around a circular park of radius 6m if he goes around the park in 20s

Answers

Answer:

1.884 meters per second

Explanation:

s = d/t

d = C = 2πr = 2π(6) = 37.68 m

t = 20 s

s = (37.68 m)/(20 s)

s = 1.884 m/s

The speed of the boy is 1.88 m/s while he is moving around a circular park of radius 6m and taking time 20 seconds.

What is speed?

Speed can be defined as a measurement of how quickly the distance an object traveled changes with time. Speed is a scalar quantity as it has magnitude but no direction as a unit of measurement.

An object that moves quickly and with high speed, traveling a lot of ground in a lesser time.

Given, the radius of the circular park, r = 6m,

The time taken to cover one round of the park, t = 20 s

The total distance traveled by the boy is equal to the circumference of the circular park, so

Circumference of park, C = d = 2πr = 2× 3.14 × 6 =37.68 m

The speed of the boy, S = d/t

S = 37.68 /20

S = 1.88 m/s

Therefore, the speed of the boy is equal to 1.88 m/s.

Learn more about speed, here:

brainly.com/question/13074982

#SPJ2

I need help with this question!

Answers

Answer:

Explanation:

Conservation of momentum

In the x direction

2(15) + 2(-10) = 2(-5) + 2(vBfx)

vBfx = 10 m/s

In the y direction

2(30) + 2(5) = 2(20) + 2(vBfy)

vBfy = 15 m/s

vBf = 10i + 15j

KEi = ½(2)(15² + 30²) + ½(2)(-10² + 5²) = 1250 J

KEf =  ½(2)(-5² + 20²) + ½(2)(10² + 15²) = 750 J

KEf - KEi = 750 - 1250 = -500 J

Please answer the question in the picture

Answers

To me I would most think the answer is A.
PLEASE GIVE BRAINLIEST!!!

A 70 kg man is running up the stairs which is 3m high in 2s.(a)How much work is done by the man?(b)What is the power exerted by the man? (Use g = 10ms 2)​

Answers

Explanation:

m = 70 kg

s = 3m

t =2s

g = 10 m/s²

(a)How much work is done by the man?

W = Fs

= mg X s

= 70 x 3 x 10

= 210 x 10

= 2100 Joule

(b)What is the power exerted by the man?

P = W/t

= 2100/2

P = 1050 Watt

A 2N and an 6N force pull on an object to the right and a 4N force pulls on the object to the left. If the object has a mass of 0.25 kg what is its acceleration?

Answers

Answer:

[tex]16m/s^{2}[/tex]

Explanation:

Please ask if you have more questions!

13) What property of matter would be measured with this piece of equipment?
A) The mass of an apple
hing
)
By the temperature of a room
The volume of water in a glass.
D) The length of a piece of string.

Answers

Answer:

a

Explanation:

i took the test 100%

(c) It is suggested that one side of the copper sheet cools to a lower temperature than the
other side.
Explain why this does not happen.
[2]

Answers

Answer:

Explanation:

The word "sheet" implies that the copper is quite thin.

Copper is also a very good conductor of heat.

Therefore, with a very short heat flow distance to cover and a high rate of heat transmission, temperature differences on either side of the sheet are almost instantaneously eliminated by heat flow.

If 90J of energy are available for every 30C of charge, what is the potential difference?
Enter your answer as a number
V

Answers

Answer:

3 v

Explanation:

Explain how the removal of heat energy affects the speed of the particles in a substance

Answers

Answer:

The removal of heat energy slows the speed of particles

Explanation:

When you add heat to a substance, the heat energy gets transferred to kinetic energy, and the molecules began to move a greater distance at a greater speed. When you remove heat, the opposite happens.

hey if you talk to me i will mark you as a brainliest and if you answer all my question
huh huh huh ​

Answers

Answer:

what will happen if i will answer ur questions?

Explanation:

is there gonna be a bad thing or a good thing

Which combination of three concurrent forces acting on a body could not produce equilibrium?
1
1 N, 3N, EN
2
2 N, 2N, 2N
.
3.
3 N, 4N, EN
4.
4N, 4N, 5N

Answers

All the three concurrent forces acting on a body will not produce equilibrium.

The given parameters:

1. 1 N, 3 N and 5 N

2. 2N, 2N and 2 N

3. 3N, 4N and 5 N

4. 4N, 4N and 5 N

Concurrent forces lie on the same plane and their line of action pass through a common point.

A body under concurrent forces is in equilibrium if the resultant of the forces on the body is zero.

[tex]\Sigma F = 0\\\\F_1 + F_2 + F_3 = 0\\\\F_1 + F_ 2 = - F_3[/tex]

where;

[tex]F_3[/tex] is the equilibrant force

First set of concurrent forces;

[tex]1 \ N \ + \ 3\ N = 4 \ N\\\\F_ 3 = 5 \ N\\\\5 \ N > 4 \ N[/tex]

Second set of concurrent forces;

[tex]2 \ N \ + \ 2 \ N = 4 \ N\\\\F_ 3 = 2 \ N\\\\4 \ N > 2 \ N[/tex]

Third set of concurrent forces;

[tex]3 \ N \ + \ 4 \ N = 7 \ N\\\\F_ 3 = 5 \ N\\\\7 \ N > 5 \ N[/tex]

Fourth set of concurrent forces;

[tex]4 \ N \ + \ 4 \ N = 8 \ N\\\\F_ 3 = 5 \ N\\\\8 \ N > 5 \ N[/tex]

Thus, we can conclude that all the three concurrent forces acting on a body will not produce equilibrium.

Learn more about concurrent forces here: https://brainly.com/question/20165540

A car is moving north on a freeway. If a bug is flying south on the freeway, is the momentum of the bug positive or negative?
Neither

Positive


Negative


Can be both depending on the weather

Answers

Negative

Because the car is moving up and the bug is moving down. but it also depends on the weather so choice between one of those two I think is Negative but I may be wrong.

How large is the tension in a rope that is being used to accelerate a 100 kg box upward at 2m/s2?

Answers

m=100kgAcceleration=2m/s^2

[tex]\\ \sf\Rrightarrow T=F[/tex]

[tex]\\ \sf\Rrightarrow T=ma[/tex]

[tex]\\ \sf\Rrightarrow T=100(2)[/tex]

[tex]\\ \sf\Rrightarrow T=200N[/tex]

12- Calculate the power when a force of 60N moves an object over a distance of 0.6 km in 20

minutes

A. 100watts

B. 6,000 watts

C. 0.25watts

D. 30 watts

Answers

Hi there!

To solve, we must begin by calculating the total WORK done on the object.

W = F · d (Force · displacement)

Plug in the given values. Remember to convert km to m:

1 km = 1000 m

0.6 km = 600 m

W = 60 · 600 = 36000 J

Now, we can solve for power:

P = W/t

Convert minutes to seconds:

1 min = 60 sec

20 min = 1200 sec

P = 36000/1200 = 30 W ⇒ Choice D.

A body with a uniform acceleration travels distances of 24m and 64m during the first two equal consecutive intervals of time, each of duration 4s. Determine the initial velocity and acceleration of the moving body.​

Answers

Answer:

Explanation:

Average velocity in the 24 m interval is 24 / 4 = 6 m/s

Average velocity in the 64 m interval is 64 / 4 = 16 m/s

There is a 4 second interval between the two points where average velocity equals actual velocity

a = Δv/t = (vf - vi) / t = (16 - 6) / 4 = 2.5 m/s²

s = v₀t + ½at²

24 = v₀(4) + ½(2.5)4²

4v₀ = 24 - 20

v₀ = 1 m/s

Not asked for but the velocity at the end of the first segment and beginning of the second segment is 11 m/s and final velocity is 21 m/s

Physical Science A 2021-2022
Why does increasing the number of trials increase confidence in the results of the experiment?

Answers

Answer:

Increasing the number of trials reduces the impact of any one imprecise measurement. … To increase the number of attempts, you can find an average result for the experiment, as well as find and discrepancies as human error if you perform an experiment several times.

Explanation:

hope it helps :)

Answer:

It is because the increase in the number of trials reduces the impact of any one imprecise measurement. Using an average value for data points provides a better representation of the true value.

Avery is experimenting with a simple circuit. She measures the current in the circuit three different times with a different battery each time. First, she uses a 1.5-volt battery. Next, she uses a 3-volt battery. Last, she uses a 9-volt battery. The resistance stays the same during each test. How did the current change for each test? Explain.

Answers

Answer: the current increases with each 3 volt and 9 volt. The relationship between resistance and current in a circuit is that the greater the resistance the less the current and the greater the current the less the resistance is. yayayay I could answer this I big brain :)

i need help with the problem below

Answers

Answer:

Explanation:

a) F = ma

a = F/m

a = 9(800) / 1 x 10⁹ = 7.2 x 10⁻⁶ m/s

b) t = v/a

t = 200 / 7.2 x 10⁻⁶

t = 2.8 x 10⁷ s       about 10½ months

c) v² = u² + 2as

s = (v² - u²) / 2a

s = (200² - 0²) / (2( 7.2 x 10⁻⁶))

s = 2.8 x 10⁹ m    nearly 7 times around the earth

And all this assumes NO FRICTION.

refers to a fear of being trapped in a crowded, public place.

Answers

Answer:

Agrophobia

Explanation:

an anxiety disorder in which someone feals anxious and scared in a public place

Other Questions
Please help!!!! :) thank you! what are the next three terms in the sequence below? 2, 5, 10, 50, ___, ___, ___ The essential resources used by early peoples werea. water, animals, and fertile land.C. copper, gold, and fertile land.b. water, copper, and animals.d. iron, copper, and water.Please select the best answer from the choices provided OB0 CDSave and ExitNextSubmitMark this and retum Sarah is 2 inches taller than the quotient of billys height and 5. Let b represent Billys height. write an expression that represents Sarahs height The use of second-person pronouns is most appropriate in which situation?O A resumeO An autobiographyO A dinner invitationO An entry in your diary How do the geography and resources of Chile and Peru help these countries' economies? Include at least one example for each country in your answer. (I rlly need help, I don't want anymore overdue assignments yall) If the road becomes wet or crowded, you should ____. slow down and increase your following distance All choices are incorrect. maintain your speed and following distance speed up and decrease your following distance Submit answer Help me with this plzzzzzzzzz write two idioms in French, and what they really mean in English. solve pls brainliest Triple covalent bond can be formed between: a)C&Hb) N&Sc) C & Sd) C&Oe) O & S WILL GIVE BRAINLIEST IF UR RIGHTT!!Which of these options is an ineffective claim?Grades a great way to measure learning.I think that students should be able to grade their teachers. Grades are irrelevant to actual learning. Grading, while not the best way to measure learning, is the only practical way to measure learning on a large scale. Add the following: (i) 2a+b+c, a - b -c, 3a + b If a car is traveling 100 km/h and comes to a stop in 3 minutes,what is acceleration of a passenger who is using vehicle restraint? 1. What are hand tools ? *1 point2. Give one example and one use of the following handtools I. Measuring tool II. Cutting Tool III. Striking tool *6 points3. Name the hand tool used to drive nails *1 point4. Name the hand tool used to cut plastic and metal pipes *1 point5. Which hand tool is used to clamp your work piece to the work table ? *1 point6. What are portable power tools? *1 point7. Name the power tools used to carryout the following operations I. Boring holes II. Cutting curves III. Sanding *3 points8. List three examples of stationary machines *3 points Based on the information in the table, how much will Henry earn if he worked 7 hours?A$48+B$72$9D$63 Which type of circuit would be best to use for lights used for decorations? Eva earns $5.50 per hour and time-and-a-half for overtime for all hours over 40 hours. How much did she earn the week she worked 47 hours? According to Hebrews 11, what did Abraham believe God would do if Isaac was slain as a sacrifice? It is estimated that __________ percent of adults in the united states have a cell phone.