Answers
mass of pentane : = 30.303 g
moles of Al₂(CO₃)₃ : = 0.147
Further explanationGiven
1. Reaction
C₅H₁₂+8O₂→6H₂O+5CO₂.
45.3 g water
2. 2AlCl₃ + 3MgCO₃ → Al₂(CO₃)₃ + 3MgCl₂
37.2 MgCO₃
Required
mass of pentane
moles of Al₂(CO₃)₃
Solution
1. mol water = 45.3 : 18 g/mol = 2.52
From equation, mol ratio of C₅H₁₂ : H₂O = 1 : 6, so mol pentane :
= 1/6 x mol H₂O
= 1/6 x 2.52
= 0.42
Mass pentane :
= mol x MW
= 0.42 x 72.15 g/mol
= 30.303 g
2. mol MgCO₃ : 37.2 : 84,3139 g/mol = 0.44
mol Al₂(CO₃)₃ :
= 1/3 x mol MgCO₃
= 1/3 x 0.44
= 0.147
Related Questions
What characteristic of an element’s atoms always determines the element’s identity?
Answers
Answer:
Number of protons
Explanation:
There are three sub atomic particles. These are;
- Protons
- Electrons
- Neutrons
Among these three particles, only one determines the identity of the element. This is the Protons. The number of protons which is also called the atomic number determines the identity of an element. For instance, atom with one proton is Hydrogen and n other element can have atomic number of one.
6. A father rabbit had long ears while the mother rabbit had short ears. Which of these statements
explains why one of the baby bunnies could have long ears?
a
The baby bunny inherited its copies of the gene for ear length from its father and not from
its mother. Those genes connect together to make its ears long.
b
The baby bunny inherited its copies of the gene for ear length from its father and not from
its mother. Just like its father's genes, those genes instruct for proteins that connect in
ways that make its ears long.
С
The baby bunny inherited one copy of the gene for ear length from its father and one copy
from its mother. That gene combination instructs for proteins that connect in ways that
make long ears.
d
The baby bunny inherited one copy of the gene for ear length from its father and one copy
from its mother. Those genes connect together to make its long ears.
Answers
Answer:
D if I’m correct
Explanation:
I really am bad at chemistry
Answers
Answer:
A, 4,3,3,4
B, 3,2,2,3
C, 2,6,2,3
D, 1,2,1, 1
Determine the final temperature of sample with a specific heat of 1.1 J/g°C and a mass of 385 g if it starts out at a temperature of 19.5°C and 885 J of energy are added to it.
Answers
Answer:
T2 =21.52°C
Explanation:
Given data:
Specific heat capacity of sample = 1.1 J/g.°C
Mass of sample = 385 g
Initial temperature = 19.5°C
Heat absorbed = 885 J
Solution:
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
ΔT = Final temperature - initial temperature
885J = 385 g× 1.1 J/g.°C×(T2 - 19.5°C )
885 J = 423.5 J/°C× (T2 - 19.5°C )
885 J / 423.5 J/°C = (T2 - 19.5°C )
2.02°C = (T2 - 19.5°C )
T2 = 2.02°C + 19.5°C
T2 =21.52°C
Water has a molar mass of 18.0 g/mol. How many particles of water do you drink if you drink 64 oz., or 1893 grams, of water in a day?
Answers
Answer:
[tex] \frac{1839}{18} = 102.16[/tex]
Take 102.16 and multiply by avogadros #
and you get 6.33 × 10^25 otherwise A
Answer:
Answer is A
Explanation:
I just took this.
How many moles are present in 44.8 L of nitrogen gas (Na)?
Answers
Answer:
two moles
There are two moles.
Explanation:
Name the following parts:
A—-
B——
C——
Answers
B—-Neutron
C—-Proton
The sun’s core is made of solid rock. True or false
Answers
Answer:
False
Explanation:
Heres what its made of:
The core is made of hot, dense plasma (ions and electrons), at a pressure estimated at 265 billion bar (3.84 trillion psi or 26.5 petapascals (PPa)) at the center. Due to fusion, the composition of the solar plasma drops from 68–70% hydrogen by mass at the outer core, to 34% hydrogen at the core/Sun center.
OMG PLS ANSWER IM USING SO MANY P OINTS I SWEAR I NEED
Answers
Answer:
1)They have different densities.
2) The molecules are packed differently
Explanation:
Oil and Water have different densities The first reason that water and oil don’t mix is because their molecules are packed differently. The molecules of water are packed very densely. (Would be good to show water molecules packed densely) In one glass of water, there are more molecules than the number of known stars in the universe!
Answer:
diff densities
Explanation:
PLEASE HURRY !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WILL GIVE BRAINLIEST
What type of rock is limestone? Describe how a limestone rock is likely to change over a long period of time.
Answers
Answer:
Over time, the limestone is broken down into its chemical parts and may come back to the surface as volcanic CO2 (in the atmosphere). From the atmosphere, the CO2 might again become part of the biosphere by molluscs or corals absorbing the CO2 to help make their shells
Explanation:
Over a long period of time, we would take a look at the rock "limestone" through the rock cycle. Limestone being a sedimentary rock would be converted to marble, a metamorphic rock if subjected to metamorphic conditions over an extensive period of time.
"Henry mixed salt and water together in a cup until he observed a clear solution. He measured the mass of the solution. Then he placed the cup outside for several sunny days during the summer. After a week, he observed that only solid salt remained in the cup and the mass had decreased. Henry concluded that a physical and chemical change occurred in this investigation."
Which statements correctly defend or dispute his conclusion?
A.)He is correct. Dissolving salt in water is a physical change, but evaporating the water is a chemical change. Formation of a solid is evidence that a chemical change occurred.
B.)He is correct. Evaporation is a physical change, but dissolving salt in water is a chemical change. The change in mass is evidence that a chemical change occurred.
C.)He is incorrect. Dissolving salt in water and evaporation of the water are both physical changes. The reappearance of salt is evidence that the change was reversible by a physical change, so it could not be a chemical change.
D.)He is incorrect. Dissolving salt in water and evaporation of the water are both chemical changes. The reappearance of salt is evidence that the change was reversible by a chemical change, so it could not be a physical change.
Answers
Answer:
C.)He is incorrect. Dissolving salt in water and evaporation of the water are both physical changes. The reappearance of salt is evidence that the change was reversible by a physical change, so it could not be a chemical change.
Explanation:
From the analogy of the problem presented, we can see that Henry is grossly incorrect. His conclusion from the process of the experiment he carried out is completely wrong.
Physical changes are changes that alters the physical properties of matter particularly the form and state.
Chemical changes leads to the formation of a new kind of matter.
We can see that since the salt was obtained back after evaporation, no change has occurred to it.
Therefore, evaporation in itself is a physical change process.
Answer:
c on ed
Explanation:
can someone help answer this? thanks!
if surface tension relies on intermolecular forces, how could you make surface tension decrease?
(think about how and where molecules bind to each other)
Answers
Answer:
We could make the surface tension to decrease by removing and causing a disruption to the intermolecular forces(hydrogen bonds).
Explanation:
To explain this answer, we will consider an experiment whereby a paper clip is made to rest at the top surface of water inside a container/beaker.
First of all, the intermolecular forces present in water are also known as hydrogen bonds.
It's relationship with surface tension is that when there is high surface tension in the water, this high tension will allow the paper clip to rest on top of the hydrogen bonds present at the top surface in between the water molecules.
However, the surface tension will decrease when we remove or cause a disruption to the intermolecular forces (hydrogen bonds).
____ power is generated from the heat released when uranium atoms split in a process known as fission.
Answers
A solution of baking soda has a pH of 9. Baking soda
(blank)
Answers
Answer: is a base
Explanation:
Large areas on the leaves of some plants lack chlorophyll and are therefore not green in color. How does this most likely affect photosynthesis?
Not enough sunlight is captured in these areas of the leaves.
Carbon dioxide cannot enter these areas of the leaves.
Too much glucose builds up in these areas of the leaves.
Oxygen cannot be released in these areas of the leaves
Answers
Answer:
Not enough sunlight is captured in these areas of the leaves.
Explanation:
Photosynthesis is the process whereby green plants manufacture their food using carbon dioxide and water in the presence of sunlight.
The sunlight is the energy source which drives this chemical change or reaction.
Therefore, to capture the sunlight, the green pigment called chlorophyll is needed. Without this sunlight, photosynthesis will not take place. Photosynthesis is a light dependent reaction. Without light, the process is greatly hamperedThere are 4 different types of sublevels: s,p,d,f true or false
Answers
I think it is true because level 4 has 4 sublevels which is s, p, d and f.
True or false for these!!!! Please help
Answers
True
True
False
True
False
Hope this helps!
Energy stored in an object because of position or condition is called ___________ energy.
Answers
Answer:
Potential energy
help lols plsssksksksksskd
Answers
Answer:
I'd say "a" because not everything with plants and animals is perfectly organized together nothing ever is.
Please help me 30 pointsss dont guess please be sure
Answers
Answer:
Acid
Explanation:
;)
3. All the deer in Horry County represent which of the following?
species
biome
population
community
Answers
Answer:
community
Explanation:
Answer:
The correct answer is population. I took the test and got it right.
Earths rocks change from one type to another over time die to various earth processes A- igneous rock B- cementation C- metamorphic rock D- rock cycle
Answers
Answer:
The rock cycle describes the processes through which the three main rock types (igneous metamorphic, and sedimentary) transform from one type into another.
I think this is gonna be 2050 for memers
Answers
Answer:
HOLY WOAH
Explanation:
YES
Mixtures can be separated by physical processes.
A sequence of physical processes can be used to separate common salt (sodium chloride)
from a mixture containing sand and common salt only.
Give the order and the correct scientific term for the physical processes used to separate the
common salt from the mixture.
Answers
don't know sorry.........
Which of the following statements regarding bond energies is FALSE?
Answers
Answer:where are the statements
Explanation:
Why are some energy resources more expensive to use than others?
Answers
An atom is found in group 17 and contains 10 neutrons. How many valence
electrons does it have? *
Answers
What do the letters ESM stand for?
Answers
Answer:
European stability mechanism
A rocket travels 4500 meters in 150 seconds. What is its average speed?
Answers
Answer:
Your average speed was 3.77 Miles per hour
Explanation:
How many moles of H 2 will I need to make 5 moles of NH3?
12 SSO
Answers
Answer:
7.5 moles of hydrogen is required
Explanation:
Given data:
Number of moles of H₂ needed = ?
Number of moles of NH₃ = 5 mol
Solution:
Chemical equation:
N₂ + 3H₂ → 2NH₃
Now we will compare the moles of ammonia and hydrogen.
NH₃ : H₂
2 : 3
5 : 3/2×5 = 7.5 mol
Thus, 7.5 moles of hydrogen is required.