pleaaaseeeee helppppp meeeee
pleaaaseeeee helppppp meeeee
pleaaaseeeee helppppp meeeee
​

Explanation:

It will be B.Its particles have no kinetic energy.

Answer: 326m

Explanation:

To find the the wavelength of the radio waves, we can use the equation:

Wavelength = c/f

where,

c = 3 × 10^8 m/s

f = 920 × 10^3 kHz

Wavelength = 3 × 10^8 / 920 × 10³

Wavelength = 326.08696

Wavelength = 326m

Answer:

Wavelength?

Explanation:

Answer:

34cm

Explanation:

Answer:

[tex]\boxed {\boxed {\sf D.\ 6.4\ m/s^2}}[/tex]

Explanation:

We need to find the acceleration of the 2 kilogram object. Let's complete this in 2 steps.

First, we can find the force of the first, 8 kilogram object.

According to Newton's Second Law of Motion, force is the product of mass and acceleration.

[tex]F=m \times a[/tex]

The mass of the object is 8 kilograms and the acceleration is 1.6 meters per square second.

Substitute these values into the formula.

[tex]F= 8 \ kg * 1.6 \ m/s^2[/tex]

Multiply.

[tex]F= 12.8 \ kg*m/s^2[/tex]

Now,  use the force we just calculated to complete the second part of the problem. We use the same formula:

[tex]F= m \times a[/tex]

This time, we know the force is 12.8 kilograms meters per square second and the mass is 2 kilograms.

Substitute the values into the formula.

[tex]12.8 \ kg*m/s^2= 2 \ kg *a[/tex]

Since we are solving for the acceleration, we must isolate the variable (a). It is being multiplied by 2 kg. The inverse of multiplication is division. Divide both sides of the equation by 2 kg.

[tex]\frac {12.8 \ kg*m/s^2}{2 \ kg}= \frac{2\ kg* a}{2 \ kg}[/tex]

[tex]\frac {12.8 \ kg*m/s^2}{2 \ kg}=a[/tex]

The units of kilograms cancel.

[tex]\frac {12.8}{2}\ m/s^2=a[/tex]

[tex]6.4 \ m/s^2=a[/tex]

The acceleration is 6.4 meters per square second.

Answer: hi your question is incomplete attached below is the complete question

answer :

Explanation:

Using the information provided in the question attached I will match each term with its corresponding meaning

Answer:

Option A

Explanation:

In this experiment, when balloon is rubbed on the chair electrons are transferred from the hair to the surface of the balloon thereby making balloon negatively charged and hair positively charged. When two negatively charged balloon are brought close to each other, they repel while when balloon is brought closer to the hair, they attract each other

Hence, option A is correct

a) The speed of the bead at B is 11.79m/s.

b) The change in mechanical energy due to friction as it  moves from B to C is 36.064 J.  

If we drop the object from the shelf or release the spring, that potential energy is converted back into kinetic energy. Kinetic energy can also be transferred from one body to another in a collision, which can be elastic or inelastic.

a)

Potential energy is converted  to kinetic energy

[tex]\frac{1}{2} mv^2=mgh\\\\v=\sqrt{2gh} \\\\v_B=\sqrt{2(9.8)(7.1-0)} \\\\v_B=11.79m/s[/tex]

The speed of the bead at B is 11.79m/s.

b)

[tex]W = mg(h_A) - mg(h_B) = 0.8(9.8)(7.1 - 2.5) = 36.064 J\\\\W=36.064J[/tex]

The change in mechanical energy due to friction as it  moves from B to C is 36.064 J.

Learn more:

brainly.com/question/13584911

Answer:

The same current flows through each resistor in series. Individual resistors in series do not get the total source voltage, but divide it. The total resistance in a series circuit is equal to the sum of the individual resistances: RN(series)=R1+R2+R3+…

Answer: Heat energy is transferred from warmer objects to cooler objects.

Explanation:

The resistance force of the water exerted on the whale is 19305 Newton.

The quantity of energy moved or converted per unit of time is known as power in physics. The watt, or one joule per second, is the unit of power in the International System of Units. Power is also referred to as activity in ancient writings. A scalar quantity is power.

Power = 150 kW = 150,000 Watt.

Constant speed = 7.77 m/s.

Now, Power = the resistance force × speed

150000 Watt =  the resistance force × 7.77 m/s

Hence, the resistance force = 150000 Watt/ 7.77 m/s

= 19305 Newton.

Learn more about power here:

https://brainly.com/question/29575208

#SPJ1

Answer:

force on the electron is upwards

Explanation:

The magnetic force is given by the relation

        F = q v x B

the bold indicates vectors, we can write the module of this expression

        F = q v  B sin θ

the direction of the force is given by the right hand rule.

If we have a positive charge, the flea points in the direction of velocity, in this case towards the inside of the page.

fingers extended in the direction of the magnetite field, in our case to the right and

the palm gives the direction of the force for a positive charge, for a negative charge it is in the opposite direction. The palm points downwards, so the force on the electron is upwards

Answer:

1 ohm is equal to one volt (V)/ one ampere (1A) 1 Ohm is defined as the resistance of a conductor with a potential difference of 1 volt applied to the ends through which 1-ampere current flows. Ohms is the SI unit of electrical resistance.

Explanation:

I hope it's help u

Explanation:

Extrusive rocks may have a few grains that are large enough to see, but most of them will be too small to see individual minerals. ... The individual mineral grains are almost too small to see. Some extrusive rocks cool so quickly that they do not form any grains. Instead, they form a natural glass.

Answer:

D

Explanation:

D ok ok ok ok bye

The correct statement is that the alcohol has lower boiling point than water. The correct option is B.

At the boiling point, the pressure exerted by the surroundings on a liquid equals the pressure exerted by the liquid's vapor, under this condition, adding heat outcomes in the transformation of the liquid into its vapor without raising the temperature.

The boiling point of alcohol is low. Because there is less hydrogen bonding between ethanol molecules than between water molecules.

The ethanol requires less energy to vaporize than water, and water has a higher boiling point than ethanol.

The boiling point of a liquid can be known by utilizing the capillary method, that encompasses placing an inverted capillary in the liquid of interest as well as heating it.

Thus, the correct option is B.

For more details regarding boiling points, visit:

https://brainly.com/question/2153588

#SPJ6

Answer:

A&B

Explanation:

Answer:

Chemical to mechanical(b) and Chemical to Thermal(a)

Answer:

C: A snow sled going down hill

Answer: [tex]3\ m/s,\ 20,00\ J[/tex]

Explanation:

Given

Mass of the first car [tex]m_1=5000\ kg[/tex]

Mass of the second car [tex]m_2=5000\ kg[/tex]

The velocity of the first car is [tex]v_1=5\ m/s[/tex]

The velocity of the second car is [tex]v_2=1\ m/s[/tex]

Conserving momentum, take [tex]v_o[/tex] as the velocity after coupling

[tex]\Rightarrow m_1v_1+m_2v_2=\left( m_1+m_2\right)v_o\\\Rightarrow 5000\times 5+5000\times 1=\left( 10,000\right)v_o\\\\\Rightarrow v_o=\dfrac{25,000+5000}{10,000}\\\\\Rightarrow v_o=\dfrac{30,000}{10,000}\\\Rightarrow v_o=3\ m/s[/tex]

[tex]\text{Initial kinetic Energy }K_1=\frac{1}{2}m_1v_1^2+\frac{1}{2}m_2v_2^2\\\\\Rightarrow K_1=\frac{1}{2}\times 5000\left( 5^2+1^2\right)\\\\\Rightarrow K_1=65,000\ J\\\\\\\text{Final Kinetic Energy}\ K_2=\frac{1}{2}\left(m_1+m_2\right)v_o^2\\\\\Rightarrow K_2=\frac{1}{2}\times 10,000\times 3^2\\\\\Rightarrow K_2=45,000\ J\\\\\text{Kinetic energy lost is equivalent to change in Initial and final energy i.e.}\\\\\Rightarrow K_1-K_2=65,000-45,000\\\\\Rightarrow K_1-K_2=20,000\ J[/tex]

Answer:

c

Explanation:

the gas pedal gives the engine the fuel it needs to give the car the power to go

Answer:

the required distance is 89.125 m

Explanation:

Given the data in the question;

we know that, sound intensity B in decibels of sound is;

β(dB) = 10log₁₀( [tex]I[/tex] / [tex]I_0[/tex] )

where intensity [tex]I[/tex] = power / area carried by wave

[tex]I_0[/tex] = 10⁻¹² W/m² { minimum threshold intensity }

Now,

intensity [tex]I[/tex] = power / area carried by wave = P/A = P/4πr² { spherical  }

given that; β = 80.0 dB and P = 10 W

so

β(dB) = 10log₁₀( [tex]I[/tex] / [tex]I_0[/tex] )

we substitute

80 = 10log₁₀( P / 4πr²× [tex]I_0[/tex])

80 = 10log₁₀( 10 / 4πr²× 10⁻¹² )

8 = log₁₀(10) - log₁₀( 4πr²× 10⁻¹² )  

8 = 1 - log₁₀( 4πr²× 10⁻¹² )

8 - 1 = -log₁₀( 4πr²× 10⁻¹² )

7 = -log₁₀( 1.2566 × 10⁻¹¹ × r² )

7 = -[ log₁₀( 1.25 × 10⁻¹¹) + log₁₀( r² ) ]

7 = -[ -10.9 + log₁₀( r² ) ]

7 = 10.9 - log₁₀( r² )

-log₁₀( r² ) = 7 - 10.9

-log₁₀( r² )  = - 3.9

log₁₀( r² ) = 3.9

2log₁₀r = 3.9

log₁₀r  = 3.9 /2

log₁₀r = 1.95

r = 89.125 m

Therefore, the required distance is 89.125 m

Answer: shorter

Explanation:

Answer:

In fission, energy is gained by splitting apart heavy atoms, for example uranium, into smaller atoms such as iodine, caesium, strontium, xenon and barium, to name just a few. However, fusion is combining light atoms, for example two hydrogen isotopes, deuterium and tritium, to form the heavier helium.

Explanation:

I hope this helped you

(Sorry If it didn't)

Answer:

A. Increases

Explanation:

Mark as Brainliest

Answer:

upward

Explanation:

In the electromagnetic system of force if the direction of motion of proton does not changes it means that the electric and magnetic forces are such a ways that they are cancelling each other's effect.

Since, electric field lines will exert a force on the proton to the west, hence, the magnetic force must force it to the east. It is well known that magnetic force acts perpendicular to the direction of magnetic field.  magnetic field should point upward direction.