place the steps in order from first to last for confirming the presence of lead(ii) ions in a sample.

Answers

Answer 1

The correct steps in order from first to last for confirming the presence of lead(ii) ions in a sample is i, iv, ii, vi, viii, iii, vi, v.

The chemical element of lead ion has the atomic number 82 and the letter Pb. It is a hefty metal with a higher density than the majority of everyday materials. Its melting point is rather low, and lead is soft and flexible. lead ion is a lustrous, slightly blue-tinged grey when it is first cut. A sample is a representative piece or one object taken from a bigger whole or group, especially when it is offered for inspection or displayed as proof of quality: specimen. A sample is a selection of individuals, things, or things used in study that is used for measurement out of a wider population. In order to be able to extrapolate the results from the research sample to the entire population, the sample must be representative of the population.

the complete question is:

place the steps in order from first to last for confirming the presence of lead(ii) ions in a sample.

i) The formation of a white and black precipitate confirms the presence of lead(II).

ii) Decant the liquid above the white precipitate and add hot water to the white precipitate.

iii) Decant the liquid and add K, CrO, to the liquid.

iv) Add HCI to the sample.

v) The formation of a yellow precipitate confirms the presence of lead(II).

vi) Decant the liquid and add HNO, to the liquid.

vi) Decant the liquid and add NH, to the white precipitate.

viii) The formation of a white solid confirms the presence of lead(II).

learn more about lead ion here

https://brainly.com/question/1782326

#SPJ4


Related Questions

which of the following statements about water are true? group of answer choices the conjugate acid of water is h3o . water can act as an acid. the conjugate base of water is oh-. water can act as a base. all of the above are true.

Answers

All the following statements are true about water.

Amphoteric nature:

A molecule or ion that can react both as an acid and as a base is known as an amphoteric compound. Since water has the potential to act both as an acid and as a base, water is amphoteric in nature.

All the statements are true about water. Water is amphoteric in nature which means that it can react with both acid as well as base. When reacting with base water acts as an acid and while reacting with acid, it acts as a base.

Learn more about amphoteric nature of water from the link given below.

https://brainly.com/question/17154022

#SPJ4

consider three one-liter flasks labeled a, b, and c filled with the gases cl2, clo2, and cl2o, respectively, each at 1 atm and 273 K. In which flask do the molecules have the highest average kinetic energy?

Answers

Consider three one-liter flasks labeled a, b, and c filled with the gases Cl₂, ClO₂, and Cl₂O, each at 1 atm and 273 K.  flask do the molecules have the highest average kinetic energy is all the flask molecules have highest average kinetic energy.

The kinetic energy expression is given as :

K.E = 3/2 K T

so, from the expression it is clear that the kinetic energy and the temperature of the gas particles are directly proportional to each other. the relation is given as :

K.E ∝ T

the temperature for all the three flasks are same so, all the three flask the molecules have the highest average kinetic energy.

To learn more about kinetic energy here

https://brainly.com/question/10714117

#SPJ4

Write the complete electron configuration of the nitrogen atom.

Answers

Answer: [He] 2s2 2p3

Phosphorus trichloride is used in the production of chemicals that keep plants from growing in a specific area. This compound is made of phosphorus and chlorine atoms. What two symbols would make up the chemical formula of this covalent compound? p and c p and cl pr and ce pr and cr.

Answers

Option b; Phosphorus trichloride is used in the production of chemicals that keep plants from growing in a specific area. This compound is made of phosphorus and chlorine atoms. Two symbols are p and cl.

An inorganic substance with the chemical formula PCl3 is phosphorus trichloride. It is a significant industrial chemical that is used to make phosphites and other organophosphorus compounds. When pure, it is a colorless liquid. It is poisonous and easily combines with water to produce hydrogen chloride. Over one million tones are produced globally. Industrially, white phosphorus and chlorine are combined while utilizing phosphorus trichloride as a solvent to create phosphorus trichloride. In this ongoing procedure, PCl3 is eliminated as it forms to prevent the creation of PCl5. It is triangular and pyramidal in shape. Regarding a standard for phosphoric acid, its 31P NMR spectrum shows a singlet at about +220 ppm.

Learn more about  Phosphorus trichloride here:

https://brainly.com/question/15585818

#SPJ4

Which gas law can be used to calculate the pressure of hydrogen gas collected over water.

Answers

Calculating the tension of hydrogen gas gathered over water is possible using Dalton's Law of Equivalent Pressures.

Is hydrogen a liquid or a gas?

Around room temperature and pressure, hydrogen is a gas, but at -423 degrees Fahrenheit, it condenses into a liquid (minus 253 degrees Celsius).

Can fuel be made from hydrogen?

The gasoline for engines with internal combustion can also be hydrogen. These, however, are less effective than FCEVs and emit tailpipe pollutants. Try reading up on fuel cells. A gallon of gasoline (6.2 kilograms, 2.8 kilograms) has approximately the same amount of energy as 2.2 gbp (1 kilogram) of hydrogen.

To know more about Hydrogen visit:

https://brainly.com/question/28937951

#SPJ4

One mL of water i poured onto one hand and one mL of acetone i poured onto the other hand. A they evaporate, they both feel cool. Which one feel cooler and why?

Answers

Energy is required for evaporation, and so this extra heat is expended from the body. they both feel chilly as they dissipate.

Describe evaporation and provide instances.

In the water cycle, evaporation happens when water from any body of water on the earth's surface evaporates into the atmosphere. Rain is produced when this water cools. Evaporation is what creates the steam inside a warm cup of coffee or tea.

What is the evaporation process?

The process of evaporation turns liquid water into gas water (water vapor). Evaporation is how water gets from the surface of the Earth to the atmosphere. Heat energy causes the bonds holding the water together to fall apart, which causes evaporation.

To know more about evaporation visit:

https://brainly.com/question/5019199

#SPJ4

how many grams of sodium cholide are thee in 55.0 ml of a 1.90 m aqueous solution of sodium chioride

Answers

The aqueous solution of sodium chloride is 56.9g

Reason:

Given:

Molarity = 1.9M,

Volume = 55 mL,

Molar Mass NaCl = 58.44 = [ 22.99 + 35.45 ], 1.9M means 1.9 moles in 1000 mL

55mL -> (1.9)(55/1000) = 0.1045

Mass in g = (58.44)(0.1045) = 6.10698

Learn more about Sodium Chloride:

https://brainly.com/question/6649122

#SPJ4

what is the ph of a solution prepared by diluting 50.00 ml of 0.020 m ba(oh)2 with enough water to produce a total volume of 250.00 ml?

Answers

The pH of the solution is 11.6

given that :

molarity of Ba(OH)₂ = 0.020 M

volume = 50 mL = 0.05 L

number of moles = molarity × volume in L

                            = 0.020 ×  0.05

                            = 0.001 mol

the molarity after dilution = 0.001 / 0.250

                                           = 0.004

pOH = -log (0.004 )

        = 2.39

pH + pOH = 14

pH = 14 - pOH

     = 14 - 2.39

     = 11.6

Thus,  the pH of a solution prepared by diluting 50.00 ml of 0.020 m  Ba(OH)₂ with enough water to produce a total volume of 250.00 ml is 11.6.

To learn more about pH here

https://brainly.com/question/29386398

#SPJ4

                         

Researchers investigated the influence of environmental pH on the activity of peroxidase, an enzyme that catalyzes the conversion of hydrogen peroxide to water and oxygen gas. In an experiment, the researchers added a hydrogen peroxide solution containing guaiacol to several identical test tubes and adjusted the solution in each test tube to a different pH. The researchers included the guaiacol because it caused the solutions to change color as the reactions proceeded, which the researchers relied on for measuring reaction rates. Finally, the researchers added the same amount of peroxidase to each test tube and measured the rate of each reaction at 23°C. The results of the experiment are represented in Figure 1.
Based on Figure 1, which of the following statements best predicts the effect that a change from a moderately acidic environment (pH near 6) to a basic environment will have on peroxidase activity?
Peroxidase activity will decrease.

Answers

Peroxidase activity will decrease predicts the effect that a change from a moderately acidic environment (pH near 6) to a basic environment will have on peroxidase activity

An antioxidant enzyme class that has the ability to scavenge free radicals is glutathione peroxidase. This in turn aids in preventing lipid peroxidation and maintaining redox equilibrium as well as intracellular homeostasis [71].

The thyroid organs are the principal sites of expression for thyroid peroxidase, also known as thyroperoxidase (TPO). It is a sizable transmembrane glycoprotein that is found on the apical membrane of cells and has covalently attached hemoglobin (Gardas et al., 1999). Coffee's pH ranges from 4.85 to 5.10, which is considered acidic, as the brewing process releases acidic from the coffee beans.

Learn more about peroxidase here:

https://brainly.com/question/14870911

#SPJ4

would you expect the tert-butyl bromide or the tert-butanol to have a higher boiling point? describe the intermolecular forces present in each to justify your answer (5 pts).

Answers

Tert-butanol has a -OH group so it will undergo hydrogen bonding and it will show the highest boiling point, while tert- butyl bromide has no hydrogen bonding.

What is the Boiling point?

When a liquid's vapour pressure equals that of the gas above it, that liquid has reached its boiling point. When a liquid's vapour pressure reaches one atmosphere, it is said to have reached its usual boiling point (760 torrs).

What is Hydrogen bonding?

Two atoms that are already involved in other chemical connections are attracted to one another in a hydrogen bond. Hydrogen is one of the atoms, while the other can be any electronegative element, such as oxygen, chlorine, or fluorine. Atoms within a molecule or molecules can form hydrogen bonds with one another.

Hence, tert-butanol has a -OH group so it will undergo hydrogen bonding and it will show the highest boiling point, while tert- butyl bromide has no hydrogen bonding.

To know more about Hydrogen bonding, check out:

https://brainly.com/question/1426421

#SPJ4

a-hawks
b-caterpillars
c-foxes

Answers

I'm pretty sure its b Caterpillars

if a thermodynamic equilibrium constant is only a function of temperature, why does it apparently change with solvent?

Answers

If a thermodynamic equilibrium constant is only a function of temperature,  it apparently change with solvent because  the nature of the solvent will affect the equilibrium constant.

The equilibrium constant of the reaction is the value of the ratio between the concentration of the reactant and the concentration of the product.

let us take an example :

aA + bB ⇄ cC + dD

equilibrium constant , K = [ C ]^c [D]^d / [A]^a [B]^b

The only thing ,equilibrium constant affect by is the temperature. the different solvent also affect the equilibrium constant because of the differential stabilization of the reactant and the product form.

To learn more about equilibrium constant here

https://brainly.com/question/10038290

#SPJ4

a reaction vessel contains5.50 g of co and 5.50g of o2. how many grams of co2 could be produced according to the following unbalanced reaction?

Answers

Grams of CO2 produced = 8.63 g

From the question, we have

5.50g of oxygen and 5.50g of co are present in the reaction vessel.

Moles of CO = 5.50 * 1/28.01

=0.196 moles

Moles of O2 = 5.50*1/15.99

= 0.344 moles

Moles of O2 required = 0.344/2 = 0.172 moles

Grams of CO2 produced = 0.196*44.01

=8.63 g

Equal numbers of atoms from various elements are present in both the reactants and the products in balanced chemical equations. Varied elements' atom counts in the reactants and products of unbalanced chemical equations are different. Unbalanced chemical equations are those that have an uneven number of atoms of one or more elements in the reactants and products.

To learn more about unbalanced reaction visit: https://brainly.com/question/28169970

#SPJ4

the solubility of slaked lime, ca(oh)2, in water at 20°c is 0.185 g/100.0 ml. what volume of 0.00100 m hcl is needed to neutralize 10.0 ml of a saturated ca(oh)2 solution?

Answers

Solubility of slaked lime = 0.185 g/100 mL.
That means:

Mass of calcium hydroxide = 0.185 g.
Volume = 100 mL = 0.1 L.
Molarity of HCl = 0.00100 M.
Volume of calcium hydroxide = 12.5 L.


Calculate the number of mol for calcium hydroxide:

n
C
a
(
O
H
)
2
=
M
a
s
s
M
o
l
a
r
m
a
s
s
=
0
.185
g
74
.09
g
/
m
o
l
=
0.00250
m
o
l
n
C
a
(
O
H
)
2
=
M
a
s
s
M
o
l
a
r
m
a
s
s
=
0
.185
g
74
.09
g
/
m
o
l
=0.00250
m
o
l




Calculate molarity for calcium hydroxide:

M
o
l
a
r
i
t
y
o
f
C
a
(
O
H
)
2
=
n
C
a
(
O
H
)
2
V
o
l
u
m
e
=
0.00250
m
o
l
0.1
L
=
0.0250
M
M
o
l
a
r
i
t
y
o
f
C
a
(
O
H
)
2
=
n
C
a
(
O
H
)
2
V
o
l
u
m
e
=
0.00250
m
o
l
0.1
L
=0.0250
M




For the given volume, number of mol of calcium hydroxide present is:

n
C
a
(
O
H
)
2
=
0.0250
M
×
0.0125
L
=
0.000312
m
o
l
n
C
a
(
O
H
)
2
=0.0250
M
×0.0125
L
=0.000312
m
o
l


When calcium hydroxide dissociates in water then 2 mol of hydroxide ion are released. That means twice the mol of calcium hydroxide,
n
O
H

=
2
×
0.000312
m
o
l
=
0.000624
m
o
l
n
O
H

=
2
×
0.000312
m
o
l
=
0.000624
m
o
l
.0.000624 mol are required to completely neutralize the HCl. The required volume can be calculated as:

M
o
l
a
r
i
t
y
o
f
H
C
l
=
n
H
C
l
V
o
l
u
m
e
V
o
l
u
m
e
=
n
H
C
l
M
o
l
a
r
i
t
y
o
f
H
C
l
=
0.000624
m
o
l
0.00100
M
=
0.624
L
M
o
l
a
r
i
t
y
o
f
H
C
l
=
n
H
C
l
V
o
l
u
m
e
V
o
l
u
m
e
=
n
H
C
l
M
o
l
a
r
i
t
y
o
f
H
C
l
=
0.000624
m
o
l
0.00100
M
=0.624
L


Hence, the required volume of HCl is 624 mL.

the curved arrow notation is a powerful method used by organic chemists to show the movement of electrons not only in resonance structures, but also in chemical reactions. since each curved arrow shows the movement of two electrons, following the curved arrows illustrates the bonds that are broken and formed in the reaction. consider the following reaction. use the curved arrows drawn in the reaction to draw the structure of x. x is converted in the following step to phenol and hcl.

Answers

When a compound's qualities cannot be fully explained by a single structure, we require more structures. These additional structures are known as resonance structures, and the phenomenon they describe is known as resonance.

Resonance is the term used to describe the phenomena of enhanced amplitude that happens when the frequency of a periodic force is applied (or a Fourier component of it) is equal to or nearly equal to the natural frequency of the system on which it works. In contrast to when the same oscillating force is applied at other, non-resonant frequencies, a dynamic system will oscillate at a higher amplitude when the oscillating force is applied at its resonant frequency.

Resonant frequencies or resonance frequencies of the system are frequencies at which the response amplitude is a relative maximum. Small periodic forces that are close to a resonant frequency of the system can produce large amplitude oscillations in the system due to the storage of vibrational energy.

Learn more about resonance here: brainly.com/question/28318319

#SPJ4

what quantity of heat (in kj) will be released if 1.20 mol of sro is mixed with 0.951 mol of co₂ in the following chemical reaction? sro (s) co₂ (g) → srco₃ (s) ∆h°

Answers

In this case, we will calculate -222.53 kilojoules. The exchange of heat from a high-temperature object to a low-temperature object is referred to as heat transfer.

How to solve?

Complete question: How much heat will be released (∆H) if 1.20 mol of SrO is mixed with 0.951 mol of CO₂ in the following chemical reaction? SrO (s) + CO₂ (g) → SrCO₃ (s) ∆H° = -234 kJ/mol?

- 1 moles of SrO reacts with 1 mole of CO2,therefore,

1.20 mol of SrO should react with 0.951 x 1 =0.951 moles of CO2

SrO is limiting reagent and CO2 is excess reagent

1 moles of SrO releases -234 KJ/mol of energy

1.20 mole SrO will release -234KJ/mol x 0.951 = -222.53  KJ/mol of energy

Answer: -222.53 KJ/mol

What causes heat to be released?

Heat is released during an exothermic reaction, raising the temperature of the immediate environment. The environment is cooled by an endothermic process that absorbs heat.

What is the heat transfer equation?

The formula for heat transfer is Q=m.c.T, where Q is the amount of heat transmitted, m is the mass, c is the specific heat, and t is the temperature change.

Learn more about combustion here:

https://brainly.com/question/13153771

#SPJ4

which statement is true? which statement is true? in a reaction, oxidation can occur independently of reduction. a redox reaction involves either the transfer of an electron or a change in the oxidation state of an element. if any of the reactants or products in a reaction contain oxygen, the reaction is a redox reaction. redox reaction is a reaction in which there is a change in the oxidation states of atoms in going from reactants to products.

Answers

In a redox reaction, any increase in the oxidation state of a reacant must be accompanied by a decrease in the oxidation state of a reactant.if any of the reactants or products in a reaction contain oxygen, the reaction is a redox reaction. redox reaction is a reaction in which there is a change in the oxidation states of atoms in going from reactants to products.

a chemical process that occurs when an object comes into touch with oxygen or another oxidizer. Rust and an apple's brown color are examples of oxidation. There is an oxidation reaction when oxygen interacts with a substance or an element. The process of removing hydrogen from the reactant species is another definition of oxidation. A molecule, atom, or ion undergoes oxidation when it loses electrons.

Reactions where electrons are gained are referred to as reduction, whereas reactions where electrons are lost are referred to as oxidation.

Learn more about oxidation here:

https://brainly.com/question/16976470

#SPJ4

Answer:

a reaction in which the exchange of electrons (oxygen) occurs.

Explanation:

sulfur is in the same column of the periodic table as oxygen but it is less electronegative than oxygen. compared to water molecules, how will the h2s molecules behave?sulfur is in the same column of the periodic table as oxygen but it is less electronegative than oxygen. compared to water molecules, how will the h2s molecules behave?not be able to form hydrogen bonds with each otherhave a higher capacity to absorb heat for the same change in temperaturehave greater cohesion to other h2s moleculeshave a greater tendency to form hydrogen bonds with each other

Answers

Sulfur is in the same column of the periodic table as oxygen but it is less electronegative than oxygen , the H₂S molecules will behave as not be able to form hydrogen bonds with each other.

The hydrogen bond is the type of the dipole dipole interaction between the molecules directly attached to the more electronegative atom like Fluorine , oxygen and nitrogen.  for hydrogen bonding the molecule must contain highly electronegative atom.  the hydrogen bonding are of the two types : intermolecular hydrogen bonding and intramolecular hydrogen bonding.

Thus, sulfur is in the same column as oxygen but  H₂S molecules will not form the hydrogen bond with each other.

To learn more about sulfur here

https://brainly.com/question/8503575

#SPJ4

use the ionic bonding model to determine which has the higher melting point, rbcl or sro . explain your answer.

Answers

RbCl has a lower charge and a higher melting point. Since the strontium and oxygen ions are bound acrystalline lattice according to the bonding concept, you would expect SrO to have a higher melting point.

What, in theory, is bonding?

Valence Covalent bond formation and the electrical structure of molecules are both covered by bond theory. The theory presupposes that inside a molecule, specific atoms' atomic orbitals are occupied by electrons, and that electrons from one atom are drawn to the nucleus of another atom.

What are the three theories of bonds?

Lewis hypothesis In this idea, the atom's surrounding electrons and lone pairs are represented by dots. Theory of valence bonds: According to this hypothesis, bonds are formed when electrons are shared among atoms' orbitals. Theory of molecular orbitals That is

To know more about bonding model visit:

https://brainly.com/question/22788745

#SPJ4

On the basis of strength of intermolecular forces, which of the following elements would be expected to have the highest melting point?(A)Br2(B) Cl2(C) F2(D) Kr(E) N2

Answers

The element with the highest melting point is bromine (Br2). As a result, choice (A) is the right one.

Intermolecular forces: What are they?

The attractive and repellent forces that form between the molecules of a substance are known as intermolecular forces. The majority of the chemical and physical characteristics of matter are governed by these forces. Vander Waals forces are the intermolecular forces that hold molecules together.

Intermolecular forces are those that exist within the molecules themselves. Intermolecular forces keep the particles of solids and liquids bound together.

Dipole-Dipole Interactions, Ion-Dipole Interactions, Ion-Induced Dipole Interactions, Dipole-Induced Dipole Interactions, and Dispersion Forces are the intermolecular forces.

A significant amount of energy will be needed to break bonds as atom sizes grow because of the stronger intermolecular force. Since among all the elements, bromine is the largest in size. Bromine will therefore have the highest melting point.

To know more about intermolecular forces visit:

https://brainly.com/question/21059583

#SPJ1

write the symbol for the ion of each element. classify the ion as an anion or a cation, and name the ion. a) potassium b) oxygen c) tin ( 2 electrons lost) d) bromine e) beryllium f) cobalt (3 eletctron lost )

Answers

a) The symbol of potassium is K

b) The symbol of oxygen is O

c) The symbol of tin  ( 2 electrons lost) Sn²⁺ and its cation.

d) The symbol bromine is Br

e) The symbol beryllium is Be

f) The symbol cobalt (3 electrons lost ) is  Co³⁺ and it's a cobaltic cation.

What is the symbol for a chemical?

Chemical elements, functional groups, and chemical compounds are represented by chemical symbols, which are acronyms used in chemistry. Elements' chemical symbols typically include one or two Latin letters, with the first letter capitalized.

As superscripts or subscripts, additional information, such as an isotope, an ionization state, or an oxidation state, can be added to the symbol in addition to the letters. Some isotopes have unique symbols instead of isotopic information added to the element symbol.

For more questions like Chemical symbols click the link below:

https://brainly.com/question/21565874

#SPJ4

enough of a monoprotic acid is dissolved in water to produce a 1.55 m solution. the ph of the resulting solution is 2.70 . calculate the ka for the acid.

Answers

The ka for the monoprotic  acid is 5.37 × 10⁻⁴.

Consequently, a monoprotic acid is an acid that may donate simplest one proton, whilst polyprotic acid can donate multiple proton. in addition, a monoprotic base can most effective accept one proton, while a polyprotic base can take delivery of more than one proton.

The key difference among monoprotic and diprotic acid is that monoprotic acids are able to donate one hydrogen atom or proton to their aqueous solution, while diprotic acids are able to donate  hydrogen atoms or protons to their aqueous answer.

Calculation:-

The value of dissociation constant of acid is

Ka = (0.00295)(0.00295)/0.0162)

Ka = 5.37 × 10⁻⁴

Learn more about monoprotic acid here:-

#SPJ4

Base-catalyzed biodiesel production utilizes __________________: transformation of an ester into another ester through interchange of the alkoxy group.

Answers

Base-catalyzed biodiesel production utilizes transesterification : transformation of an ester into another ester through interchange of the alkoxy group.

What is a transesterification ?

Transesterification is defined as the chemical process of converting triglycerides with alcohol into alkyl esters using a catalyst [64]. Because of their low cost and ease of availability, methanol and ethanol are commonly used alcohols in this process.Strong acids catalyse the reaction by donating a proton to the carbonyl group, resulting in a more potent electrophile, whereas bases catalyse the reaction by removing a proton from the alcohol, resulting in a more nucleophilic product. The carbonyl carbon of the starting ester reacts to form a tetrahedral intermediate, which either reverts to the starting material or proceeds to the transesterified product in the transesterification mechanism (RCOOR2). The various species are in equilibrium, and the distribution of the product is determined by the relative energies of the reactant and product. Depending on the reaction conditions, ester hydrolysis and/or esterification will also occur, resulting in the presence of some free carboxylic acid.

To learn more about transesterification refer :

https://brainly.com/question/14788177

#SPJ4

. suppose 45.1 g of sulfuric acid is mixed with 47. g of sodium hydroxide. calculate the minimum mass of sulfuric acid that could be left over by the chemical reaction. round your answer to 2

Answers

the minimum mass of sulfuric acid that could be left over by the chemical reaction is 0.4608 mol.

How to calculate ?

H2SO4(aq) + 2NaOH(s) ==> Na2SO4(aq) + 2H2O(l)  ...  balanced equation

Find the reactant that is the limit. Determine which is less by dividing the moles of each reactant by the corresponding coefficient in the balanced equation.

For H2SO4:  45.1 g H2SO4 x 1 mol H2SO4/98 g = 0.4602 mols   (÷1>0.4602)

For NaOH:  47. g NaOH x 1 mol NaOH / 40. g = 1.175 mols (÷2->1.175)

Since 0.4602 is less than 1.175, H2SO4 is our limiting reactant, and the greatest amount of product that may be created will depend on the moles of H2SO4.

If the reaction is allowed to finish, there can be no more H2SO4 than a minimum mass of 0 grams. There shouldn't be any NaOH left over because it will run out before it is completely consumed.

That's a different matter if you meant to inquire about the smallest mass of NaOH that might possibly remain. In that scenario, you'll need to submit the problem again.

learn more about moles visit :

https://brainly.com/question/26416088

#SPJ4

determine the michaelis constant, the maxmium velocity of the reaction, the turnover number and the catalytic efficiency

Answers

The substrate concentration at which a reaction progresses at half its maximum velocity is known as the Michaelis constant, or Km. The affinities are most precisely represented by this constant.

A high Michaelis constant: what does that mean?

The Michaelis constant is a measure of the substrate's affinity for the enzyme; a small value implies high affinity, suggesting that the rate will approach with lower than those processes with a higher value. Its value is numerically equivalent to the at which the reaction rate is at half-maximum.

The significance of a low Michaelis-Menten constant

The enzyme's affinity for the molecules of the substrate is represented by the Michaelis-Menten constant. Less substrate concentration will be required if the enzyme has a high affinity for the substrate.

To know more about Michaelis constant visit:

https://brainly.com/question/25657597

#SPJ4

compare the structures of cellulose and amylose. what is the same about the two figures? what is different? what stabilizes these structures

Answers

They both lack branching chains. They are carbohydrate linear polymers connected by 1,4 links. Both of them are sophisticated polysaccharides. Cellulose creates long, chains, whereas Starch is shaped like a helix.

What purpose does cellulose serve?

Paper, board, including textile made from cotton, flax, and other plant fibers mostly consist of cellulose. Additionally, it is employed in the creation of cellulose derivatives, films, and fibers.

What foods have a high cellulose content?

Vegetables with roots and leaves, beans, and also some fruits like pears and apples all contain significant amounts of cellulose. Fruits, especially berries and peaches, have the highest lignin concentration, whereas apples and citrus fruits have the highest pectin levels.

To know more about Cellulose visit:

https://brainly.com/question/2687863

#SPJ4

where would 14c have to be in the starting glucose to ensure that the fermentation process releases all of the 14c label as 14co2?

Answers

The methyl group of pyruvate is where C1 labels when it is added to glucose. A hexose is split into two trioses by aldolase.

What exactly happens during fermentation?

Carbohydrates are broken down by the enzymes of microorganisms during fermentation in the absence of oxygen. Microorganisms like bacteria and fungi are able to produce enzymes that can break down different kinds of sugar molecules because they have unique sets of metabolic genes.

Short answer: What is the fermentation process?

A substance decomposes into a simpler substance through the process of fermentation. In the absence of oxygen or any electron transport, the metabolic process known as fermentation transforms organic molecules (mostly carbohydrates like starch or sugar) into acids, gases, or alcohol.

To know more about fermentation process visit:

https://brainly.com/question/28813836

#SPJ4

Why is shampoo not harmful to hair but soap is? select all statements that apply.

Answers

It is acidic shampoo. Not basic, but in between acidic and neutral. Because basic shampoo would be harmful in this situation. The basic ph of soap is incorrect.

Shampoo or hair soap, which is worse for hair?

Once or twice will not harm your hair when you wash it with soap, but frequent washings with bar soap can lead to serious issues including roughness and severe tangles. Choose a shampoo instead to clean your hair. Dry shampoo is an excellent option for your hair if you wish to forgo shampoo.

Does soap damage hair?

You can wash your hair with soap, but if you're used to using liquid shampoo, the results will probably not be satisfactory.

Learn more about shampoo here:

brainly.com/question/11192467

#SPJ4

jeremiah's parents are having a lot of difficulty with their 15-year-old son. he continually argues with them and tests their rules. a psychologist tells jeremiah's parents that his urge to rebel will probably as jeremiah reaches late adolescence.

Answers

Jeremiah's parents are having a lot of difficulty with their 15-year-old son. He continually argues with them and tests their rules. A psychologist tells Jeremiah's parents that his urge to rebel will probably decrease as Jeremiah reaches late adolescence.

Adolescent psychology seeks to understand teens and assist them in transitioning from childhood to adulthood. According to the American Academy of Pediatrics, adolescence is a time of rapid development in five areas: moral, social, physical, cognitive, and emotional.

Adolescence, the years between puberty and adulthood, can be divided into three stages: early-adolescence (ages eleven to fourteen), middle-adolescence (ages fifteen to seventeen), and late-adolescence (ages eighteen to twenty-one).

Anyone who works or lives with teenagers will benefit from a course in adolescent psychology. Learn about the physical, psychological, and emotional changes that teenagers go through. Learn about the crises and challenges that adolescents face. Recognize social and moral development.

To learn more about adolescent psychology, here

https://brainly.com/question/25687647

#SPJ4

How many atoms of hydrogen ( h ) are present in 200 molecules of ammonia ( nh3 )?.

Answers

First, lets examine the formula for that of Ammonia.

Ammonia = NH3

Notice that in the formula, there are 3 hydrogen atoms in a single ammonia molecule. This being said, if there are 200 molecules of ammonia in the given scenario, multiply 200 by 3.

[tex]200[/tex] × [tex]3 = 600[/tex] ← Amount of (H) Atoms Present in 200 (NH3) Molecules

Hope this helps!

Other Questions
PLS HELP!!! I really need help!Use substitution to solve the system.5x + 4y = 9-2x + y = -14 Automobiles shared which of the following with electrification?Both linked remote rural areas and national life.Both were important markers of status.Both facilitated the growth of suburbs.Both conveyed a sense of personal empowerment. a client who is in hospice care reports increasing amounts of pain. the healthcare provider prescribes an analgesic every four hours as needed. which action should the nurse implement? nicotine patches are often used to help smokers quit. does adding antidepressants to the nicotine patches help which statement should the nurse convey to the mother of a 3-year-old son who has not achieved urinary continence? A carpenter states that it will take 21.5 hoursto build the deck. If the carpenter charges$24.00 per hour, how much will the carpenterbe paid?F$45.50G$129.00H$504.00J $516.00 technician a says that batteries may slowly fail over time due to the loss of a cell or open circuits within the internal connections. technician b says that batteries may slowly fail over time through the gradual loss of capacity caused by plate deterioration. who is correct? the velocity of an object is given v(t), and the acceleration is given by a(t). what is the relationship between the total What brought an end to the spirit of cooperation between the u. S. And the soviet union that was begun by richard nixon?. Please help me solve john proctor puts his commitment to the truth above all else, even though it will cost him a chance to live on with his wife and to know his child who hasn't yet been born. streams come down out of steep areas (like mountains) onto much flatter land, lose velocity, and drop material in triangular-shaped structures called if it takes 4.0 n to stretch a spring 6.0 cm and if the spring is then cut in half, what force does it take to stretch one of the halves 3.0 cm? Without a variance clams mussels and oysters that are stored in a shell fish tank in the dining room must beA.served within 8 hoursB.consumed within 90 days C.maintained at 32F (0C) D. for display only a full term infant is admitted to the newborn nursery. after careful assessment, the nurse suspects that the infant may have an esophageal atresia. which symptoms are this newborn likely to exhibit? Which standard of equality is most concerned with the distribution of resources?. to test dns configuration by resolving a host name to an ip address, which command or commands can you use? (choose all that apply.) imagine that we did an experiment where participants were asked to play a video game. at various points during the video game a very loud white noise would play (something that is typically quiteac jeremiah's parents are having a lot of difficulty with their 15-year-old son. he continually argues with them and tests their rules. a psychologist tells jeremiah's parents that his urge to rebel will probably as jeremiah reaches late adolescence. Since the time of Jackson, a national convention has been used to do which of the following?A. organize state cautusesB.nominate a party candidate for presidentC. organize the machine politics in major citiesD. determine the party budget and platform