Phosphorus is implanted into silicon. The implant parameters are a dose of 1015cm-2at an energy of 150keV.a)Find the depth of the peak of the implant profile and its value at that depth.b)If the wafer originally had 1016cm-3of boron uniformly distributed throughout, find the depth(s) at which the concentration of phosphorus is equal to the concentration of boron.

Answer:

The lithosphere solid part of the earth's crust

Sulfate - SO4^-2

Sulfite - SO3^-2

Hydrogen Sulfate - HSO4-

Answer:

1.) Eyewash station --> D

2.) Absorbent material --> G

3.) Fire extinguisher --> F

4.) Safety Shower --> E

5.) Biohazard container --> J

6.) Broken glass container --> I

7.) Safety goggles --> C

8.) Lab apron --> H

9.) asbestos gloves --> A

10.) Latex gloves --> B

Explanation:

In an equipped laboratory, alot of safety equipments are made available and kept in area that it could be easily accessed in the laboratory. Safety or protective equipments are those materials that helps protect a laboratory personnel while at work on the lab.

These equipments include:

--> Eyewash station: This is an equipment used in the laboratory during emergency to rinse chemical from the eye. Therefore option D is correct.

--> Absorbent material: They are used to contain small spills in the laboratory. Therefore option G is correct.

--> Fire extinguisher: This equipment is used to put out small fires. Therefore F is correct.

--> Safety Shower: This is used to rinse away chemical from clothes and on skin during emergency. Therefore option E is correct.

--> Biohazard container: This container is used to safely dispose bacteria culture, blood and other living tissues. Therefore option J is correct.

--> Broken glass container: This is used to dispose cracked, chipped or broken bottle in the laboratory. Therefore option I is correct.

--> Safety goggles: This helps to protect the eye from chemical and broken glasses. Therefore option C is correct.

--> Lab apron: This is worn by the laboratory personnel to help protect the skin from chemical and biohazards. Therefore option H is correct.

--> Asbestos gloves: these are heat resistant gloves used to protect the hands from heat. Therefore option A is correct.

--> Latex gloves: these are equally worn by the laboratory personnel to protect the hands from chemicals and biohazards

[tex]Answer :—✔[/tex]

Explanation:

X = Group 1 metal

Y = Group 7 Non metal

The dots basically signifies the group.

Metal loses electrons and non metal gains electron. The valency of X is 1 and that of Y is 7.

X atom loses one electron and Y atom gains one electron.

The bond that forms between a metal and a non metal is an ionic bond.

Answer:

[tex]\boxed {\boxed {\sf 5.2 *10^{22} \ molecules \ NaCl}}[/tex]

Explanation:

1. Convert grams to moles

First, convert grams to moles using the molar mass. This can be found on the Periodic Table.

Sodium (Na) has an oxidation state of +1 and chlorine (Cl) has an oxidation state of -1, so they combine in a 1:1 ratio for a formula of NaCl. We can simply add their moles masses.

Use this as a ratio.

[tex]\frac {58.4397693 \ g \ NaCl}{ 1 \ mol \ NaCl}[/tex]

Multiply by the given number of grams.

[tex]5.0 \ g \ NaCl *\frac {58.4397693 \ g \ NaCl}{ 1 \ mol \ NaCl}[/tex]

Flip the fraction so the grams of sodium chloride cancel.

[tex]5.0 \ g \ NaCl *\frac {1 \ mol \ NaCl}{ 58.4397693 \ g \ NaCl}[/tex]

[tex]5.0 *\frac {1 \ mol \ NaCl}{ 58.4397693 }=\frac {5.0 \ mol \ NaCl} { 58.4397693 } = 0.0855581749 \ mol \ NaCl[/tex]

2. Convert moles to molecules

We must use Avogadro's Number. This tells us the amount of particles (molecules, atoms, etc.) in 1 mole of a substance. In this case, it is molecules of sodium chloride.

[tex]\frac{6.022*10^{23} \ molecules \ NaCl} {1 \ mol \ NaCl}[/tex]

Multiply by the number of moles we calculated.

[tex]0.0855581749 \ mol \ NaCl*\frac{6.022*10^{23} \ molecules \ NaCl} {1 \ mol \ NaCl}[/tex]

The moles of sodium chloride cancel.

[tex]0.0855581749 *\frac{6.022*10^{23} \ molecules \ NaCl}{1}=5.15231329*10^{22} \ molecules \ NaCl[/tex]

The original measurement of grams has 2 (2 and 0) significant figures, so our answer must have the same. For the number we calculated, that is the hundredth place. The 5 in the hundredth place tells us to round the 1 to a 2.

[tex]5.2 *10^{22} \ molecules \ NaCl[/tex]

Answer:

Explanation:

Mass = 66.6 gram

Density = 0.790 g/mL

Volume = Mass ÷ Density

Volume = 66.6 ÷ 0.790

Volume = 84.30 mL

Answer:

[tex]\boxed {\boxed {\sf 155 \ g\ CO}}[/tex]

Explanation:

To convert from moles to mass, the molar mass must be used.

First, write the chemical formula for carbon monoxide. Since the carbon (C) comes first without a prefix, there is 1 carbon atom. The prefix mono- before oxide means 1, so there is also 1 oxygen (O) atom. The formula is CO.

Next, look up their molar masses on the Periodic Table.

Since there is 1 atom of each, the molar masses can be added.

Use this molar mass as a ratio.

[tex]\frac {28.01 \ g \ CO} {1 \ mol \ CO}[/tex]

Multiply by the given number of moles:5.55

[tex]5.55 \ mol \ CO *\frac {28.01 \ g \ CO} {1 \ mol \ CO}[/tex]

The moles of carbon monoxide cancel.

[tex]5.55 * \frac {28.01 \ g \ CO} {1 }[/tex]

Multiply.

[tex]155.4555 \ g \ CO[/tex]

The original measurement of moles has 3 significant figures, so our answer must have the same. For the number we calculated, it is the ones place. The 4 in the tenths place tells us to leave the 5.

[tex]155 \ g\ CO[/tex]

5.55 moles of carbon monoxide is about 155 grams.

hope it helps you ❣❣

Mark me as brainliest

Answer:

25°C

Explanation:

Combined Gas Law (P₁V₁)/T₁ = (P₂V₂)/T₂

(0.947 atm)(150 mL)/25°C = (0.987 atm)(144mL)/T₂

5.682 = 142.128/T₂

T₂ = 142.128/5.682

T₂ = 25.0137272756°C = 25°C

Answer:

pH value of HCL = 2.69897

Explanation:

Given:

Concentration of HCL = 0.002 M

Find:

pH value of HCL

Computation:

pH value of HCL = - log(Concentration of HCL)

pH value of HCL = - log(0.002)

pH value of HCL = 2.69897

Answer:

5.68g

Explanation:

Answer:

Is the answer eight atoms

Answer:

FALSE!

Explanation:

Gymnosperms do use seeds but are exposed like the pine cones of pines. Angiosperms still have seeds, however, they flower or fruit.

Answer:

False

Explanation:

Answer:

Has definite shape and volume

Solids have high melting point

Explanation:

Answer:

Yes, they work in space. I forgot an example, will edit the post when I found it

Hope this helps!

Answer:

You Need To Upload The Photo Then I Will Help You :)

Explanation:

Answer:

Hyba odpowiedzi c. Hyba

Mole can be defined as the number of molar mass units of the compound in the sample. The moles of ammonium dichromate in 325 grams sample is 1.29 mol.

The molar mass can be given as the mass of each atom in the formula unit. The molar mass of ammonium chromate is given as:

[tex]\rm (NH_4)_2Cr_2O_7=2(N)+4\;\times\;2(H)+2(Cr)+7(O)[/tex]

Substituting the mass of each atom to identify the molar mass of ammonium chromate:

[tex]\rm (NH_4)_2Cr_2O_7=2(14)+4\;\times\;2(1)+2(52)+7(16)\\ (NH_4)_2Cr_2O_7=28+8+104+112\\ (NH_4)_2Cr_2O_7=252 \;g/mol[/tex]

The molar mass of ammonium dichromate s 252 g/mol. The moles of the compound in 325 g is given as:

[tex]\rm Moles=\dfrac{mass}{molar\;mass} \\\\Moles=\dfrac{325\;g}{252\;g/mol}\\\\ Moles=1.29\;mol[/tex]

The moles of ammonium dichromate in the sample are 1.29 mol. Thus, option c is correct.

Learn more about moles, here:

https://brainly.com/question/15209553

Answer: true

Explanation:

C. picking a tray in the cafeteria line

Answer:

Cold front

Explanation:

Answer:

I guess this answer is c

yh

Answer:

b. (Actual yield ÷ theoretical yield) x 100

Explanation:

The percent yield will be a ratio of collected or actual yield to the theoretical yield. Like any percentage, you are determining a part of a whole. You multiply by 100 to convert your decimal answer from the division into a percentage.

Answer:

6 volts

Explanation:

Use Ohm's Law:

V = IR

V = (2 amps)(3 ohms) = 6 volts

Answer:

carbon

Explanation:

The properties of carbon forms the basis for all life. Explanation: The atoms of carbon are found in the molecules of all living species.

Answer:

2.28bar

Explanation: Boyle's law P1V1=P2V2 manipulate formula in favor of V2 the new formula should beP1V1/V2

0.895*318/125=2.2768 but to same sigfig it is 2.28

Answer:

just downloud smart

Explanation:

thank me later

Answer:

pH = 11.216.

Explanation:

Hello there!

In this case, according to the ionization of ammonia in aqueous solution:

[tex]NH_3+H_2O\rightleftharpoons NH_4^++OH^-[/tex]

We can set up its equilibrium expression in terms of x as the reaction extent equal to the concentration of each product at equilibrium:

[tex]Kb=\frac{[NH_4^+][OH^-]}{[NH_3]} \\\\1.80x10^{-5}=\frac{x*x}{0.150-x}[/tex]

However, since Kb<<<1 we can neglect the x on bottom and easily compute it via:

[tex]1.80x10^{-5}=\frac{x*x}{0.150}\\\\x=\sqrt{1.80x10^{-5}*0.150}=1.643x10^{-3}M[/tex]

Which is also:

[tex][OH^-]=1.643x10^{-3}M[/tex]

Thereafter we can compute the pOH first:

[tex]pOH=-log(1.643x10^{-3}M)\\\\pOH=2.784[/tex]

Finally, the pH turns out:

[tex]pH=14-2.784\\\\pH=11.216[/tex]

Regards!

The caliper is a component which is used by a disc brake system for performing its function.

The disc braking system consist of components such as disc/rotor, a brake calliper and brake pads. When the brake pedal is pushed, brake fluid creates pressure that produces friction.

So we can conclude that the caliper is a component which is used by a disc brake system for performing its function.

Learn more about system here: https://brainly.com/question/14323743