As shown in the diagram below, a 1 kg rock tied to a rope is
swung by a boy. This rock has a constant speed of 5 m/s,
and the length of the rope is 1 m. The rock's angular
momentum is
Answer:
Explanation:
Angular momentum has a formula of L = mvr. Fillingin:
L = (1.0)(5.0)(1.0)
L = 5.0 kg*m/s
what is the lowest frequency of a standing wave that has the fewest number nodes and antinodes
Answer:
Fundamental frequency
write the application of gravitational force
Answer:
Applications of Gravitational Force:
Gravity keeps your feet on the ground. Gravity holds the air down. Gravity makes the Earth roughly spherical. Gravity keeps the Moon (and all those artificial satellites) orbiting around the Earth. Gravity keeps the Earth orbiting around the Sun and the Sun orbiting around the galactic centre. Gravity creates the water pressure that runs hydroelectric turbines at the bottom of dams. Gravity brings the rain back down after it evaporates into the atmosphere.Physicist ____ was found to have completely made up some of the data on which his astounding discoveries were made.
Answer:
Jan Hendrik Schön I believe
In what way may the turning effect of a force be increased?
By decreasing the perpendicular distance between the force and the pivot point
By lubricating the fulcrum with oil or grease.
By increasing the perpendicular distance between the force and the pivot point.
By reducing the applied force
Answer:
By increasing the perpendicular distance between the force and the pivot point
Explanation:
Due to the formula [tex]force * distance[/tex],
An increase in distance would cause the turning force to increase
Feel free to mark it as brainliest :D
I will give more points
for this thank you I u helped
me
Answer:
weight = mass×gravity
15×9.8147Nstay safe healthy and happy.Mark was traveling at 40 mph on a road with a drag factor of 0.85. His brakes were working at B0o/o efficiency. To the nearest tenth of a foot, what would you expect the average length of the skid marks to be if he applied his brakes in order to come to an immediate stop
The average length of the skid marks to be if he applied his brakes in order to come to an immediate stop is 78.43 ft.
The given parameters:
Speed of Mark, v = 40 mphDrag factor, F = 0.85Working efficiency of the brake, n = 80%The average length of the skid marks to be if he applied his brakes in order to come to an immediate stop is calculated as follows;
[tex]v = \sqrt{30 D fn} \\\\40 = \sqrt{30 \times D \times 0.85 \times 0.8} \\\\40 = \sqrt{20.4 D} \\\\40^2 = 20.4D\\\\1600 = 20.4 D\\\\D = \frac{1600}{20.4} \\\\D = 78.43 \ ft[/tex]
Thus, the average length of the skid marks to be if he applied his brakes in order to come to an immediate stop is 78.43 ft.
Learn more about length of a skid mark here: https://brainly.com/question/16914218
Which is a valid ionic compound?
sodide chlorine
sodium chlorine
sodium chloride
sodide chloride
Answer:
sodium chloride
Explanation:
Sodium chloride is an ionic compound. The ions of the sodium chloride compound is sodium ion and chloride ion. The sodium ion is cation while the chloride ion is an anion. Sodium chloride is a very stable compound because of the mutual attraction of oppositely charged ions.
A charge Q acts on a point charge to create an electric field. Its strength, measured a distance of 40 cm away is 100 N/C. What is the magnitude of the electric field strength at a distance of 20 cm
Answer:
[tex]E_2=80N/C[/tex]
Explanation:
From the question we are told that:
Initial Distance [tex]d_1=40cm=>0.4m[/tex]
Initial Electric field strength [tex]E_1=100N/C[/tex]
Final Distance [tex]d_2=20cm=>0.20m[/tex]
Generally the equation for Electric field is mathematically given by.
[tex]E=\frac{kq}{d^2}[/tex]
[tex]q=\frac{100*(0.4)^2}{K}[/tex]
Substituting q for [tex]d=20cm[/tex]
[tex]E_2=\frac{k}{0.2}*\frac{100*(0.4)^2}{K}[/tex]
[tex]E_2=80N/C[/tex]
The voltage drop across any component is
the difference in voltage referenced to
between the two terminals of
the component.
Answer:
The voltage si the nevery Hokage de Naruto y fue su amigo
what is the power of a student that has done a work of 10 joules in 10 seconds
Answer:
1 Watt
Explanation:
P=W/t
P=10/10
P=1 Watt
If a chemical spill reaches groundwater, the availability of which resource will be reduced for people in the area?
A. fish
B. drinking water
C. hydroelectric energy
D. geothermal energy
the M.E = K.E + P.E. If the M.E of the football is 150 J and when it's thrown the K.E is 70 J. What is the P.E of the football?
Answer:
M.E = K.E +P.E
150=70+P.E
P.E=150 –70
P.E=80J
walk done in units time is called
Answer:
Explanation:
work done per unit time is caleed power.it's SI unit is watt.it depends upon time.
Electrical current is the flow of ____________
A) helium
B) protons
C) atoms
D) electrons
How much voltage is required to make 0.56 A flow through a 72-ohm resistance? [V = I x R]
A)48 V
B)36 V
C)40 V
D)52 V
WILL GIVE BRAINLIEST!!!
Solution :
A) Electric current is the flow of electrons .
B) We know, by ohm's law :
V = I × R
Putting given values in above equation, we get :
V = 0.56 × 72 V
V = 40.32 V
Hence, this is the required solution.
A table is moved using 60 N of force.
How far is the table moved if 900 J of work is done on the table?
960 m
840 m
15 m
0.06 m
Answer:
15m
Explanation:
W=f×s
[tex]s = \frac{w}{f} \\ s = \frac{900j}{60n} \\ s = 15m [/tex]
Given:
Force,
F = 60 NWork done,
W = 900 JWe know,
→ [tex]W = F\times s[/tex]
or,
→ [tex]s = \frac{W}{F}[/tex]
By putting the values, we get
[tex]= \frac{900}{60}[/tex]
[tex]= 15 \ m[/tex]
Thus the above response i.e., "Option c" is right.
Learn more about work done here:
https://brainly.com/question/8625856
Please hurry Describe why electric currents can be dangerous
Answer:
Cardiac Arrest, burns, and nerve damage.
Explanation:
Basically, the main risk is cardiac arrest, caused by the electric current interfering with the normal operation of the heart muscle. Other possible damages are burns due to the electric energy vaporizing the water inside the cells, and nerve damage caused by excessive current through the nerves.
If a positively charged rod is brought near the knob of a positively charged electroscope, the leaves of the electroscope will...
A) converge, only
B) diverge, only
C) first diverge, then converge
D) first converge, then diverge
Answer:
B
Explanation:
if a positively charged rod is brought near the knob of a neutral electroscope, it will attract some electrons up from the leaves onto the knob. That process causes both of the leaves to be positively charged (excess protons), and the leaves will diverge.
can someone please help me answer this question ?
Answer:
b 60 N force
Explanation:
The change in the momentum is given by the force•distance from the attached point. We don't have any distance, but apparently, the stick forces are being applied in each quarter of the stick, so let's use fractions of 4 to solve it:
150 N:
150•1/4 = 37.5
30 N:
30•2/4 = 30•1/2 = 15
60 N:
60•3/4 = 45
40 N:
40•4/4 = 40•1 = 40
What would make oppositely charged objects attract each other more?
increasing the positive charge of the positively charged object and increasing the negative charge of the
negatively charged object
decreasing the positive charge of the positively charged object and decreasing the negative charge of the
negatively charged object
increasing the distance between the positively charged object and the negatively charged object
maintaining the distance
tance between the positively charged object and the negatively charged object
Hurry I need answers quick I’m timed
Answer:
A). Increasing the positive charge of the positively charged object and increasing the negative charge of the negatively charged object.
Explanation:
The two objects possessing opposite or unlike charges attract one another due to the electromagnetic force between the electrons, as well as, protons in order to develop ionic lattices.
As per the question, the objects having unlike charges would attract one another more when we 'escalate the positive charge of the object having a positive charge and enhance the negative charge of the object possessing negative charge.' This will lead the atoms that are losing electrons to be positively(+ve) charged and the atoms gaining electrons to be negatively
(-ve) charged. Thus, the electromagnetic force among them increases and a stronger ionic network develops leading them to attract each other more. Hence, option A is the correct answer.
Answer:
The person above me is wrong the answer is actually B
Explanation:
I put his/her answer and got it wrong and it showed me theat the answer is b not a
on what factor does speed of sound depend
Answer:
For sound waves to travel, there is a requirement of medium and density of the medium is considered to be one of the factors on which the speed of sound depends. When the medium is dense, the molecules in the medium are closely packed which means that the sound travels faster.
Explanation:
a 5 kg block is on a frictionless surface. A 15 N force is applied to the block in a direction parallel to the surface. what is the acceleration of the block?
A. 3 m/s^2
B. 10 m/s^2
C. 20 m/s^2
D. 75 m/s^2
Answer:
D 75
Explanation:
I'm pretty sure it's just 5x15=75
Answer:
the answer would be 3/s^2
Explanation:
because all u have to do is divide 15 by 5 and u would get 3
expalin how waves energy and matter are related
on a proton is 1.6×10`¹⁹. how many protons are in one coulomb of charge
Answer: There are [tex]6.25 \times 10^{18}[/tex] protons present in one coulomb of charge.
Explanation:
Given: Charge on proton = [tex]1.6 \times 10^{-19} C[/tex]
It is known that the charge on a proton is equal to the charge present on an electron.
Formula used to calculate number of protons is as follows.
Q = ne
where,
Q = charge considered
n = number of protons
e = charge on electron or proton
Substitute the values into above formula as follows.
[tex]Q = ne\\1 C = n \times 1.6 \times 10^{-19} C\\n = 0.625 \times 10^{19}\\= 6.25 \times 10^{18}[/tex]
Thus, we can conclude that there are [tex]6.25 \times 10^{18}[/tex] protons present in one coulomb of charge.
What is the period of a sound wave with a frequency of 20Hz?
What would happen to the distance between the bright fringes produced by a diffraction grating if the entire interference apparatus (light source, grating, and screen) were immersed in water
Answer:
Since the wavelength would be reduced by the factor of N where N is the index of refraction, fringes would be be closer to one another.
(Similar to the difference of fringes of red light and blue light.)
Electronic flash units for camera contain a capacitor for storing the energy used to produce the flash. In one such unit, the flash lasts for 1675s with an average light power output of 2.70 x 105 W . (a) If the conversion of electric energy to light is 95% efficient ( the rest of the energy goes to thermal energy), how much energy must be stored in the capacitor for one flash
Answer:
420J
Explanation:
Power is the time rate of change in energy. Power is the ratio of energy to time. The S.I unit of power is in watts.
Given that the flash lasts for 1/675 s, power output is 2.7 * 10⁵ W. Hence:
Power = Energy / time
Substituting:
2.7 * 10⁵ W = Energy / (1/675)
Energy = 2.7 * 10⁵ W * 1/675 = 400J
Therefore the energy emitted as light is 400J.
Since the conversion of electric energy to light is 95% efficient, hence the energy stored as electrical energy is:
Energy(capacitor) = 5% of 400J + 400J = 0.05*400 + 400
Energy(capacitor) = 420J
You are given two converging lenses to build a compound microscope. Lens A has focal length 0.50 cm and lens B has focal length of 3.0 cm. Which one of the two lenses would you use for the objective
Answer:
The lens to be used for the objective is lens A
Explanation:
The objective of a compound microscope
The focal length of the lens used for the objective = 1/(magnification obtained)
The focal length of most modern is equal to the tube length
The range of sizes for the focal length of a microscope is between 2 mm and 40 mm
Therefore, the appropriate lens to be used for the objective of the compound is lens A that has a focal length of 0.50 cm = 5 mm
?????? ?????help please
I WILL MARK YOU THE BRAINLIEST NO LINKS
What type of friction is acting on the airplane?
sliding friction
static friction
fluid friction
rolling friction
Answer:
I believe it's sliding friction.
Explanation: