Answer:
0.33 mole of NH₃
Explanation:
The balanced equation for the reaction is given below:
N₂ + 3H₂ —> 2NH₃
From the balanced equation above,
3 moles of H₂ reacted to produce 2 moles of NH₃
Finally, we shall determine the number of mole of NH₃ that will be produced by the reaction of 0.5 moles of H₂. This can be obtained as follow:
From the balanced equation above,
3 moles of H₂ reacted to produce 2 moles of NH₃
Therefore, 0.5 moles of H₂ will react to produce = (0.5 × 2)/3 = 0.33 mole of NH₃.
Thus, 0.33 mole of NH₃ was obtained from the reaction
When the moon is in between the earth and the sun it is a
lunar eclipe is the answer
Answer:
solar eclipse
Explanation:
When the Moon passes between Sun and Earth, the lunar shadow is seen as a solar eclipse on Earth. When Earth passes directly between Sun and Moon, its shadow creates a lunar eclipse. Lunar eclipses can only happen when the Moon is opposite the Sun in the sky, a monthly occurrence we know as a full Moon.
What change in volume results if 170.0 mL of gas is cooled from 30.0 °C to 20.0 °C? (CHARLES LAW)
Answer:
164.4 L
Explanation:
use charles' law formula Volume 1 over Temp. 1 equaled to Volume 2 over Temp. 2
What is the volume of an object with the mass of 7.9 grams in the density of 2.28g/ml.
Answer:
3.7mL is the volume of the object
Explanation:
To convert the mass of any object to volume we must use density that is defined as the ratio between mass of the object and the space that is occupying. For an object that weighs 7.9g and the density is 2.28g/mL, the volume is:
7.9g * (1mL / 2.28mL) =
3.7mL is the volume of the object0.24 moles of a gaseous product from a reaction is collected in a 25.0-L container at a pressure of 300.0 kPa. Determine the temperature (in °C) at which the gas was collected.
Answer:
3428.58 °C
Explanation:
We'll begin by converting 300 KPa to atm. This can be obtained as follow:
101.325 KPa = 1 atm
Therefore,
300 KPa = 300 KPa × 1 atm / 101.325 KPa
300 KPa = 2.96 atm
Next, we shall determine the temperature. This can be obtained as follow:
Number of mole (n) = 0.24 mole
Volume (V) = 25 L
Pressure (P) = 2.96 atm
Gas constant (R) = 0.0821 atm.L/Kmol
Temperature (T) =?
PV = nRT
2.96 × 25 = 0.24 × 0.0821 × T
74 = 0.24 × 0.0821 × T
Divide both side by 0.25 × 0.0821
T = 74 / (0.24 × 0.0821)
T = 3755.58 K
Finally, we shall convert 3755.58 K to °C. This can be obtained as followb:
T(°C) = T(K) – 273
T(K) = 3755.58 K
T(°C) = 3755.58 – 273
T(°C) = 3428.58 °C
Thus, the temperature at which the gas was collected is 3428.58 °C
Which of the following would make it easier for a plant to do photosynthesis?
O Colorful flowers
O Very large leaves.
Very tall stem.
O Short roots
The temperature is -20C. If the temperature rises by 15 oC, what is the new temperature?
Answer:k c;kz;dvk
fs;fksef ;;
Explanation:
;kk;dkf;vkd; kk
Determine the number of grams of carbon-14 remaining in this sample at 17,100 years.
Answer: I need help
Explanation:
why does the bridge buckle when there isn't a joint?
Is thier any answer choices?
Explain the difference in percent ionization in the two solutions. Match the words in the left column to the appropriate blanks in the sentences on the right.
a. left.
b. right.
c. larger.
d. smaller.
e. common ion effect.
f. formation of H3O+ by the salt.
g. addition of a weak base.
1. The percent ionization in the potassium formate solution is____than that in pure water because of the____.
2. The equilibrium for the dissociation of formic acid is shifted to the____by this addition, and a____amount of acid dissociates.
Answer:
1. The percent ionization in the potassium formate solution is smaller than that in pure water because of the common ion effect.
2. The equilibrium for the dissociation of formic acid is shifted to the left by this addition, and a smaller amount of acid dissociates.
Explanation:
The common ion effect refers to the effect on equilibrium that is observed when an ion that is already contained in the solution (common ion) is added to a solution. The addition of a common generally results in a shift in equilibrium positiont towards the removal of the common ion from solution. This is according to Le Châtelier's Principle which states that if an equilibrium becomes unbalanced, the reaction will shift to restore the balance.
The common ion effect decreases the ionization of a weak acid as the addition of more of an ion that is a product of this equilibrium will shift equilibrium towards removal of the ion.
Adding a common ion also decreases solubility, as the reaction shifts toward the left in order to annul the constraint of the excess ion in the product side of equilibrium.
The percent ionization in the potassium formate solution is smaller than that in pure water because of the Common ion effect. The equilibrium for the dissociation of formic acid is shifted to the left by this addition, and a smaller amount of acid dissociates.
What is Equilibrium law?Equilibrium law states that if any external effect is applied on the equilibrium state of any chemical reaction, then the equilibrium will shift towards that side where the effect will decrease.
Common ion effect occurs when the already present ion in the solution is further added to the solution which increases the concentration of that ion in the solution and equilibrium will shift towards the side where common ion effect will decreases.
That's why the percentage of ionization in the potassium formate solution is less than the percentage of ionization in pure water. And due to common ion effect equilibrium will shift towards the left side where dissociation decreases and the concentration of ions is also decreases.
Hence correct options are smaller, common ion effect, left and smaller.
To know more about common ion effect, visit the below link:
https://brainly.com/question/7223815
How do you think our understanding of genes might affect doctors ability to treat or prevent disease in the future?
Answer:
dentifying genetic variants Genome sequencing has the potential to improve the diagnosis of conditions caused by changes in the DNA and indicate what treatments may be most effective. Importantly, it may also red-flag treatments likely to cause adverse reactions.
Explanation:
Answer:
Identifying genetic variants Genome sequencing has the potential to improve the diagnosis of conditions caused by changes in the DNA and indicate what treatments may be most effective. Importantly, it may also red-flag treatments likely to cause adverse reactions.
Explanation:
how is the water cycle the driving process behind weathering erosion and deposition
Angus, Hereford, and Holstein are common types of ___
breeds.
NEED HELP NOW
Answer:Cattle
Explanation:Cattle
Which part of an atom would be found orbiting the nucleus?
Answer:
electrons
Electrons are negatively charged particles that orbit the nucleus. The number of electrons depends on the element and it is an ion or not
Which structure is unique to vertebrates?
limbs
brain
skin
backbone
Answer:
Backbone
Explanation:
Organisms that have backbones are known as vertebrates, while the ones without a backbone are classified as invertebrates.
The structure that is unique to vertebrates is the backbone.
What are vertebrates?Vertebrate, also known as the Craniata. It is the type of animal where it should be predominant of subphylum. Moreover, it contains the backbones. The animal or the organism that have the backbones that we called as the vertebrates however the organism or animal that does not have any backbone is known as the invertebrates
Learn more about vertebrates here: https://brainly.com/question/21582240
A buffer solution contains 0.345 M acetic acid and 0.377 M sodium acetate . If 0.0613 moles of potassium hydroxide are added to 250 mL of this buffer, what is the pH of the resulting solution ? (Assume that the volume does not change upon adding potassium hydroxide. )
Answer:
pH = 5.54
Explanation:
The pH of a buffer solution is given by the Henderson-Hasselbach (H-H) equation:
pH = pKa + log[tex]\frac{[CH_3COO^-]}{[CH_3COOH]}[/tex]For acetic acid, pKa = 4.75.
We calculate the original number of moles for acetic acid and acetate, using the given concentrations and volume:
CH₃COO⁻ ⇒ 0.377 M * 0.250 L = 0.0942 mol CH₃COO⁻ CH₃COOH ⇒ 0.345 M * 0.250 L = 0.0862 mol CH₃COOHThe number of CH₃COO⁻ moles will increase with the added moles of KOH while the number of CH₃COOH moles will decrease by the same amount.
Now we use the H-H equation to calculate the new pH, by using the new concentrations:
pH = 4.75 + log[tex]\frac{(0.0942+0.0613)mol/0.250L}{(0.0862-0.0613)mol/0.250L}[/tex] = 5.54Calculate the molarity of 32.5 g of MgS in 935 mL of solution.
The graph below shows distance over time. Which of these situations
could be represented by this graph?
Pls answer quick
Answer:
the second option
Explanation:
look at the distance where the meet up at the house and the go to school
What is the molality of a solution of naphthalene dissolved in chloroform if the solution has a boiling point of 63.2 °C?
Answer:
3.6
Explanation:that is right
What is a coefficient?
Answer:
in math it's " a numerical or constant quantity placed before and multiplying the variable in an algebraic expression (e.g. 4 in 4x y)."
In physics " a multiplier or factor that measures some property."
Explanation:
hope this is helpful!
Answer:
A coefficient is the number before a variable
Explanation:
A numerical or constant quantity placed before and multiplying the variable in an algebraic expression
How do I balance coefficient equations
Answer:
In order to balance the chemical equation, you need to make sure the number of atoms of each element on the reactant side is equal to the number of atoms of each element on the product side. In order make both sides equal, you will need to multiply the number of atoms in each element until both sides are equal.
Answer: When you balance a chemical equation, you change coefficients. You never change subscripts. A coefficient is a whole number multiplier. To balance a chemical equation, you add these whole number multipliers (coefficients) to make sure that there are the same number of atoms on each side of the arrow.
Explanation:
How many atoms are in 0.256 mol Fe?
For this one, you can use the formula:
# of atoms = # of moles * Avogadro's number
# of atoms = (0.256 mol) * (6.02 * 10^23)
# of atoms = 1.54 * 10^23 atoms
Hope It helped you!
Atoms are the smallest unit of molecules. In 0.256 mol of iron, there are 1.54 × 10²³ atoms.
What are atoms?Atoms are small entities of the compound or the molecule that can be measured by Avogadro's number. The number of atoms can be given as the product of the moles and the Avogadro's number.
If 1 mole of iron = 6.02 × 10²³
Then, 0.256 moles = 0.256 × 6.02 × 10²³
Therefore, 1.54 × 10²³ atoms of iron are present in 0.256 moles.
Learn more about atoms here:
https://brainly.com/question/10878359
#SPJ2
Choose the options below that are true. (select all that apply) Select all that apply:
a. The rate law for a given reaction can be determined from a knowledge of the rate-determining step in that reaction's mechanism.
b. The rate laws of all chemical reactions can be determined directly from their net chemical equations.
c. The rate laws of bimolecular elementary reactions are second order overall.
d. The rate law for a given reaction can be determined from its reaction mechanism,
Answer:
a, c are true statements
Explanation:
First statement concludes that only the slower stage or the rate deciding phase of the reaction allows for the rate law to be calculated. This is true
The second declaration is not valid in all regards, because we can not evaluate the correct rate law by just observing the net equation. It needs to be determined experimentally.
In the third statement, most of the bimolecular reactions are second order in general, since two reactants exist. Hence, it is true
The fourth declaration is wrong. To measure the rate of each elemental phase accompanying the response, we must observe the rates
What is true about sunlight?
A.It is the source of all energy for plants and animals.
B.It is the source of most of the energy for plants and animals.
C.It is the source of very little energy for plants and animals.
D.It is the source of very little energy for plants and animals.
DONT USE UP THE POINTS I WILL REPORT YOU!
Tell me if your from connexus.
I believe your answer will be D. I say this because only some animals need sun, and only some plants need sun to grow.
Why is boiling water a physical change
Answer:
it is cleaning the water and heating it
Answer:
When boiling the water, the water will begin to evaporate and thats the physical change.
h-h+cl+cl____2h-cl... calculate the energy needed to break the bond
What visible changes, in addition to precipitate formation, show that cations and anions have rearranged to form new products?
Answer:
Precipitation reactions
Explanation:
I need to know why the particles at the surface in the image below have surface tension while the particles below the surface do not.
what is past form of be
Answer:
was or were
Explanation:
self explainitory
The periodic table has columns that group Elements according to their
A. Name
B. Properties
C. Atomic number
D. Mass
Marking brainlist
Explanation:
atomic number.............
before phase change: molecules move around each other 15. The medicine in the diagram above has molecules that are moving around each other. The doctor needs to slow down the molecules enough to cause a phase change. How will she do this, and how will this affect the medicine? I She transfers energy ... a into the medicine until it is a liquid. b) into the medicine until it is a gas. C out of the medicine until it is a solid. d out of the medicine until it is a liquid. LE 1 21 Illuminate Education, Inc.
Answer:
She transfers energy out of the medicine until it is solid. So the answer would be C.
Explanation:
According to the forces of attraction , molecules can be slowed down by moving out of the medicine until it is a solid , it will decrease the rate of absorption of medicine.
What are forces of attraction?Forces of attraction is a force by which atoms in a molecule combine. it is basically an attractive force in nature. It can act between an ion and an atom as well.It varies for different states of matter that is solids, liquids and gases.
The forces of attraction are maximum in solids as the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.
The physical properties such as melting point, boiling point, density are all dependent on forces of attraction which exists in the substances.
Learn more about forces of attraction,here:
https://brainly.com/question/24013868
#SPJ5