Para este mismo ejercicio, si se administran 2.5 litros de está solución (2,500ml) en un intervalo de 24 horas que cantidad en gramos de paciente en un día?

2 F atoms

Explanation:

A Ca atom has a valence number of +2, which means that when ionized, it will give up two electrons. In turn, a F atom has a valence number of -1, which means it can only accept 1 electron when ionized. So to accommodate the two electrons from Ca atom, we need 2 F atoms.

Answer:

506.0 g sodium and 778.8 g chlorine gas

Explanation:

The elements from which sodium chloride (NaCl) is composed are sodium (Na) and chlorine (Cl). Thus, the chemical equation for the production of sodium chloride (NaCl) from sodium (Na) and chlorine gas (Cl₂) is the following:

2Na(s) + Cl₂(g) → 2NaCl(s)

According to the balanced equation, 2 moles of NaCl are produced from 2 moles of Na(s) and 1 mol of Cl₂. To produce 22.0 mol of NaCl, we need:

22.0 mol NaCl x 2 mol Na(s)/2 mol NaCl = 22.0 mol Na(s)

22.0 mol NaCl x 1 mol Cl₂/2 mol NaCl = 11.0 mol Cl₂

Now, we convert the moles of each reactant to grams with the molar mass (MM) of the compound:

MM(Na) = 23 g/mol

22.0 mol Na x 23 g/mol = 506.0 g Na(s)

MM(Cl₂) = 35.4 g/mol x 2 = 70.8 g/mol

11.0 mol Cl₂ x 70.8 g/mol = 778.8 g Cl₂

Therefore, it is required a mass of 506.0 grams of Na(s) and a mass of 778.8 grams of Cl₂ to produce 22.0 mol of NaCl.

Answer:

D. the capacity to do work

Explanation:

the basic definition of energy is the ability to do work

Answer: According to reaction below, when one mol of oxygen reacts with two mol of hydrogen, two mol of water is produced. Thus, when 2.5 mol of oxygen reacted with hydrogen, 2 * 2.5 mol = 5 mol of water is produced. The molar mass of water is 18 g/mol.

Explanation:

Not My WORK!  I got this info from another site.  BUT I HOPE IT HELPS :)

Answer:

Br

Explanation:

Answer:

[tex]\boxed {\boxed {\sf 2. \ 157 \ kPa}}[/tex]

Explanation:

Since temperature remains constant, the only variables that change are volume and pressure. Therefore, we are using Boyle's Law. This states that the pressure is inversely proportional to the volume. The formula is:

[tex]P_1V_1=P_2V_2[/tex]

We know the gas starts with a volume of 20.0 liters at a pressure of 275 kPa. We can substitute these values into the left side of the formula.

[tex]275 \ kPa *20.0 \ L=P_2V_2[/tex]

We know the gas expands to a volume of 35.0 Liters, but we do not know the pressure.

[tex]275 \ kPa *20.0 \ L=P_2* 35.0 \ L[/tex]

Since we are solving for the new pressure, we must isolate the variable P₂. It is being multiplied by 35.0 Liters and the inverse of multiplication is division. Divide both sides by 35.0 L.

[tex]\frac {275 \ kPa * 20.0 \ L}{ 35.0 \ L}= \frac{P_2*35.0 \ L}{35.0 \ L}[/tex]

[tex]\frac {275 \ kPa * 20.0 \ L}{ 35.0 \ L}=P_2[/tex]

The units of liters cancel.

[tex]\frac {275 \ kPa * 20.0 }{ 35.0 }=P_2[/tex]

[tex]\frac {5500}{35.0} \ kPa= P_2[/tex]

[tex]157.142857 \ kPa=P_2[/tex]

The original measurements of pressure and volume have 3 significant figures, so our answer must have the same. For the number we calculated, that is the ones place.

The 1 in the tenths place (157.142857) tells us to leave the 7 in the ones place.

[tex]157 \ kPa= P_2[/tex]

If the gas expanded to a volume of 35.0 liters while the temperature remained constant, the pressure in container was approximately 157 kilopascals.

Answer:

Meristematic Tissues. Tissues where cells are constantly dividing are called meristems or meristematic tissues. These regions produce new cells.

Explanation:

thank me later

Answer:

b is the answer hope that helps

Answer:

Cr is oxidised

and

Zn is reduced

[ Reduced reactant ] :

Cr^( + 3 ) + 3 e^( - 1 ) ===》 Cr^( 0 )

_____________________________

[ Oxidicided reactant ] :

Zn^(0) ===》Zn^( + 2 ) + 2 e^( - 1 )

Answer:

püvinlbxyfsswgrxzvnnchcyv nkivtcdg

Answer:

0.01 moles

Explanation:

14 g contains 1 mole

0.14g contains> (0.14*1)/14

= 0.01 moles

Answer:

crust

Discuss with the whole class what the relative thicknesses of the layers are — that the inner core and outer core together form the thickest layer of the Earth and that the crust is by far the thinnest layer.

Explanation:

Discuss with the whole class what the relative thicknesses of the layers are — that the inner core and outer core together form the thickest layer of the Earth and that the crust is by far the thinnest layer.

What is genetic modification (GM) of crops and how is it done? GM is a technology that involves inserting DNA into the genome of an organism. To produce a GM plant, new DNA is transferred into plant cells. Usually, the cells are then grown in tissue culture where they develop into plants.

Answer:

GM is a technology that involves inserting DNA into the genome of an organism. To produce a GM plant, new DNA is transferred into plant cells. Usually, the cells are then grown in tissue culture where they develop into plants. The seeds produced by these plants will inherit the new DNA.

Answer:

bismuth

Explanation:

i think if not i am so sorry

Answer:

Activator effects a mixture if you put to much of the activator your using into a product or thing you are using.

Explanation:

For ex.

If you poor to much activator into slime it will make the slime hard and very wet it will ruin your slime completely so you will have to do it just right but start off pouring it slowly and mix and then more if it needs more.

Answer:

d

Explanation:

from you know the atomic number it should be easy to find

To determine the molar mass of an element, one must know the element's atomic number​. Therefore, option D is correct.

An element's atomic number (Z) is the number of protons in the nucleus of each atom of that element. This means that the number of protons is the feature that distinguishes each element from all others. Elements differ based on their atomic number.

Because the combined masses of protons and neutrons account for nearly all the mass of a given atom, the atomic mass of a single atom can be calculated by adding the total number of protons and neutrons of that particular isotope.

The atomic mass of any element on the periodic table can be used to calculate its molar mass.

Thus, option D is correct.

To learn more about an atomic number, follow the link;

https://brainly.com/question/16858932

#SPJ6

The equation that correctly represents the dissociation of a strong acid in water is as follows: HCl → H+ + Cl−

Acid dissociation is the process by which an acid breaks up into it's constituent ions in an aqueous solution.

Acids are known to contain hydrogen ions (H+), hence, dissociate into H+ and an anion.

A strong acid like HCl dissociates completely in an aqueous solution while a weak acid does not dissociate completely.

According to this question, hydrogen chloride (HCl) is said to dissociate into hydrogen ion (H+) and chloride (Cl-) according to the following expression:

HCl → H+ + Cl−

Learn more about acid dissociation at: https://brainly.com/question/4363472

#SPJ1

Answer:

1618.2

Explanation:

235+75=310×75=1618.2

Answer:

HOPE IT IS HELPFUL

Answer:

4Cr + __302 -->_2Cr203.....

Answer:

8.73 × 10²⁴ formula units

Explanation:

To calculate the number of formula units a substance contain, we multiply the number of moles by Avagadro number (6.02 × 10²³)

number of formula units = 14.50 moles × 6.02 × 10²³

= 87.29 × 10²³

= 8.73 × 10²⁴ formula units.

Answer:

In a chemical reaction, reactants that are not used up when the reaction is finished are called excess reagents. The reagent that is completely used up or reacted is called the limiting reagent, because its quantity limits the amount of products formed.

Explanation:

Answer:

The balance equation of Ca(OH)2 + HCl ---> CaCl2 + H2O​

is

Ca(OH)2(s) + 2HCl(aq) ---> CaCl2(aq) +2H2O​ (l) (balanced equation)

Answer:

[tex]\boxed {\boxed {\sf 19 \ M}}[/tex]

Explanation:

Molarity is a measure of concentration in moles per liter, so the formula is:

[tex]molarity= \frac{moles \ of \ solute}{liters \ of \ solution}}[/tex]

This solution has 9.0 moles of solute and 462 milliliters of solution. We must convert milliliters to liters. Remember that 1 liter contains 1000 milliliters.

Create a ratio.

Multiply by the value we are converting: 462 milliliters

[tex]0.462 \ L[/tex]

Now we know both values and we can solve for the molarity.

[tex]molarity= \frac{9.0 \ mol}{ 0.462 \ L}[/tex]

Divide.

[tex]molarity= 19.4805195 \ mol/L[/tex]

The original measurements of moles and milliliters have 2 and 3 significant figures respectively. We have to round our answer to the least number of sig figs, which is 2 in this case.

For the number we found, that is the ones place. The 4 in the tenths place (19.4805195) tells us to leave the 9 in the ones place.

[tex]molarity= 19 \ mol/L[/tex]

1 mole per liter is equal to 1 molar or M, so our answer is equal to 19 M.

[tex]molarity \approx 19 \ M[/tex]

The molarity of the solution is approximately 19 M.

the pH numbers that are acidic above is 3 and 5

Answer: No it does not

Explanation:

The law of conservation of mass states that mass is neither created nor destroyed and in this equation you start with 1 molecule of Cl and 1 of H, but on the reactants side you end up with 2 of each. To make it follow the law of conservation of mass you would have to balance the equation

Answer:

mixture of four compounds

mixture of two elements and two compounds

Explanation: