lost of nutrition in human
Answer:
True
Explanation:
Obesity and stress are confirmed risk factors for CHD
Multiply.
(2x + 4)(x - 4)
Answer:
(2x + 4)(x - 4)=2x^2-4x-16
Explain how polarization of a cell increases the cell's internal resistance.
(2
2.
Answer:
Explanation: The chemical action that occurs in the cell while the current is flowing causes hydrogen bubbles to form on the surface of the anode. This action is called POLARIZATION. Some hydrogen bubbles rise to the surface of the electrolyte and escape into the air, some remain on the surface of the anode. If enough bubbles remain around the anode, the bubbles form a barrier that increases internal resistance. When the internal resistance of the cell increases, the output current is decreased and the voltage of the cell also decreases.
A cell that is heavily polarized has no useful output. There are several methods to prevent polarization or to depolarize the cell.
One method uses a vent on the cell to permit the hydrogen to escape into the air. A disadvantage of this method is that hydrogen is not available to reform into the electrolyte during recharging. This problem is solved by adding water to the electrolyte, such as in an automobile battery. A second method is to use material that is rich in oxygen, such as manganese dioxide, which supplies free oxygen to combine with the hydrogen and form water.
A third method is to use a material that will absorb the hydrogen, such as calcium. The calcium releases hydrogen during the charging process. All three methods remove enough hydrogen so that the cell is practically free from polarization.
LOCAL ACTION
When the external circuit is removed, the current ceases to flow, and, theoretically, all chemical action within the cell stops. However, commercial zinc contains many impurities, such as iron, carbon, lead, and arsenic. These impurities form many small electrical cells within the zinc electrode in which current flows between the zinc and its impurities. Thus, the chemical action continues even though the cell itself is not connected to a load.
Local action may be prevented by using pure zinc (which is not practical), by coating the zinc with mercury, or by adding a small percentage of mercury to the zinc during the manufacturing process. The treatment of the zinc with mercury is called amalgamating (mixing) the zinc. Since mercury is many times heavier than an equal volume of water, small particles of impurities weighing less than mercury will float to the surface of the mercury. The removal of these impurities from the zinc prevents local action. The mercury is not readily acted upon by the acid. When the cell is delivering current to a load, the mercury continues to act on the impurities in the zinc. This causes the impurities to leave the surface of the zinc electrode and float to the surface of the mercury. This process greatly increases the storage life of the cell.
Joe applies a force of 50 N to a box which has a mass of 15 kg. What is the acceleration of the box?
a.
Answer:
3.333 m/s^2
Explanation:
50/15 = 3.33 m/s^2
Developing study routines is a way to organize
a. Yes
b. No
Answer:
a. yes
Explanation:
................
A ray moving in water at 55.5 deg
enters plastic, where it bends to
48.7 deg. What is the index of
refraction for the plastic?
( water n = 1.33, Air n = 1.00 )
Answer:
Refractive index of the plastic = 1.46
Explanation:
By Snell's law,
[tex]\frac{\text{sin}\theta _{2} }{\text{sin}\theta _{1}}=\frac{n_1}{n_2}[/tex]
Here, [tex]\theta _1[/tex] = Angle of incidence in medium 1 (Plastic)
[tex]\theta_2[/tex] = Angle of refraction in medium 2 (Water)
[tex]n_1[/tex] = Refractive index of medium 1 (Plastic)
[tex]n_2[/tex] = Refractive index of medium 2 (Water)
By substituting values in the formula,
[tex]\frac{\text{sin}(48.7)}{\text{sin}(55.5)}=\frac{1.33}{n_2}[/tex]
[tex]n_2=\frac{1.33\times \text{sin}(55.5)}{\text{sin}(48.7)}[/tex]
= 1.46
Therefore, refractive index of the plastic = 1.46
52. Serves as an air passageway
a. Oropharynx
c. Nasopharynx
b. Laryngopharynx
d. Larynopharynx
Answer:
Nasopharynx
Explanation:
The nasopharynx is posterior to the nasal cavity and serves only as a passageway for air.
what are the importance of informal education?
Answer:
Informal education is important because it can help individual to learn how to react and control situations.
It help individual to improve on its existing knowledge, new skills or ideas. This kind of education can happen any where and it can add values to the learner.
Explanation:
Informal education is a type of education that is learned from different life experiences, happenings outside a structured curriculum.
Informal education is important because it can help individual to learn how to react and control situations.
It help individual to improve on its existing knowledge, new skills or ideas. This kind of education can happen any where and it can add values to the learner.
mester Exam 1 11 of 35
A car has an oil drip. As the car moves, it drips oil at a regular rate, leaving a trail of spots on the road. Which diagram shows the spots
of car that is continuously slowing down?
a 2kg block is attached to a horizontal ideal spring with a spring constant of 200 Newton per minute. when the spring has its equillibrium length of block is given a speed of 5mps. what is the maximum elongation of the spring
Answer:
The maximum elongation of the spring is 0.5 meters.
Explanation:
The statement is incorrect. The correct form is:
A 2-kg block is attached to a horizontal ideal spring with a spring constant of 200 newton per meter. When the spring has its equillibrium length, the block has a speed of 5 meters per second. What is the maximum elongation of the spring?
The block experiments a simple harmonic motion, where there are no non-conservative forces and the total energy is the sum of translational kinetic energy of the mass and the elastic potential energy of the spring. The maximum elongation of the spring is done when elastic potential energy reach its maximum. By the Principle of Energy Conservation, the maximum elastic potential energy is equal to the maximum translational kinetic energy, which corresponds to the instant when the mass reaches the equilibrium position. Then, the equation modelling the system is:
[tex]U_{max} = K_{max}[/tex] (1)
Where:
[tex]U_{max}[/tex] - Maximum elastic potential energy of the spring, measured in joules.
[tex]K_{max}[/tex] - Maximum translational kinetic energy of the mass, measured in joules.
By definitions of the maximum elastic potential energy of the spring and the maximum translational kinetic energy of the mass, the expression above is expanded and simplified:
[tex]\frac{1}{2}\cdot k\cdot x_{max}^{2} = \frac{1}{2}\cdot m \cdot v_{max}^{2}[/tex]
[tex]x_{max} = \sqrt{\frac{m}{k} }\cdot v_{max}[/tex] (2)
Where:
[tex]x_{max}[/tex] - Maximum elongation of the spring, measured in meters.
[tex]m[/tex] - Mass, measured in kilograms.
[tex]k[/tex] - Spring constant, measured in newtons per meter.
[tex]v_{max}[/tex] - Maximum speed of the mass, measured in meters per second.
If we know that [tex]m = 2\,kg[/tex], [tex]k = 200\,\frac{N}{m}[/tex] and [tex]v_{max} = 5\,\frac{m}{s}[/tex], then the maximum elongation of the spring is:
[tex]x_{max} = \sqrt{\frac{2\,kg}{200\,\frac{N}{m} } }\cdot \left(5\,\frac{m}{s} \right)[/tex]
[tex]x_{max} = 0.5\,m[/tex]
The maximum elongation of the spring is 0.5 meters.
A phosphodiester bond is used to:
A. Join glycerol to fatty acids
B. Join two nucleotides into a polynucleotide
C. Join two glucose molecules
D. Join two amino acids into a polypeptide
Answer:
A. Join glycerol to fatty acids
Explanation:
I majored in Physics.
Use the image below to answer the question.
What does the arrow 'B' represent?
Question 7 options:
wavelength
refraction
frequency
compression
Need help ASAP plsss
Write 5-6 sentences about
:how do parachutes work ??
A ripcord system pulls a closing pin, which releases a spring-loaded pilot chute, and opens the container; from which the parachute comes out.
If a skydiver is unable to open her/his parachute, an automatic activation device will automatically open the parachute.
A parachute works by forcing air into the front of it and creating a structured 'wing' under which the canopy pilot can fly. Parachutes are controlled by pulling down on steering lines which change the shape of the wing, cause it to turn, or to increase or decrease its rate of descent.
HELP ASAP!! i’ll mark you the brainliest!!
Answer:
yes
Explanation:
give an example of a normal force. type below.
Normal force is the force exerted when an object is on an surface. So an example could be a pile of books on top of a table.
This 200-kg horse ran the track at a speed of 5 m/s. What was the average kinetic energy?
Answer:
2500 JExplanation:
The average kinetic energy can be found by using the formula
[tex]k = \frac{1}{2} m {v}^{2} \\ [/tex]
m is the mass
v is the velocity
From the question we have
[tex]k = \frac{1}{2} \times 200 \times {5}^{2} \\ = 100 \times 25[/tex]
We have the final answer is
2500 JHope this helps you
giving brainiest to correct answer.
Imagine a 0.2 kg ball moving at 5 m/s colliding with a 0.3 kg ball moving at 2 m/s in the same direction. After the collision the 0.2 kg green ball stops moving and the 0.3 kg purple ball continues moving in the same direction.
giving brainiest to correct answer.
Answer:
[tex]5.33\ m/s[/tex]
Explanation:
[tex]We\ know\ that,\\Momentum=Mass*Velocity\\p=mv\\Hence,\\Lets\ first\ consider\ the\ case\ of\ the\ two\ balls\ 'Before\ Collision':\\\\Mass\ of\ the\ green\ ball=0.2\ kg\\Initial\ Velocity\ of\ the\ green\ ball=5\ m/s\\Initial\ Momentum\ of\ the\ green\ ball=5*0.2=1\ kg\ m/s\\\\Mass\ of\ the\ pink\ ball=0.3\ kg\\Initial\ Velocity\ of\ the\ pink\ ball=2\ m/s\\Initial\ Momentum\ of\ the\ pink\ ball=0.3*2=0.6\ kg\ m/s\\\\Total\ momentum\ of\ both\ the\ balls\ 'Before\ Collision'=1+0.6=1.6\ kg\ m/s[/tex]
[tex]Hence,\\Lets\ now\ consider\ the\ case\ of\ the\ two\ balls\ 'After\ Collision':\\\\Mass\ of\ the\ green\ ball=0.2\ kg\\Final\ Velocity\ of\ the\ green\ ball=0\ m/s\\Final\ Momentum\ of\ the\ green\ ball=0\ kg\ m/s\\\\Mass\ of\ the\ pink\ ball=0.3\ kg\\Final\ Velocity\ of\ the\ pink\ ball=v\ m/s\\Final\ Momentum\ of\ the\ pink\ ball=0.3*v=0.3v\ kg\ m/s\\\\Total\ momentum\ of\ both\ the\ balls\ 'After\ Collision'=0+0.3v=0.3v\ kg\ m/s[/tex]
[tex]As\ we\ know\ that,\\Through\ the\ law\ of\ conservation\ of\ momentum,\\In\ an\ isolated\ system:\\Total\ Momentum\ Before\ Collision=Total\ Momentum\ After\ Collision\\Hence,\\1.6=0.3v\\v=\frac{1.6}{0.3}=5.33\ m/s[/tex]
Some metals have a molecular structure that makes them good conductors. Explain how understanding this relationship can help engineers make more powerful batteries.
Answer:
Explained below.
Explanation:
Conductors can be defined as materials that permit electricity to flow through them easily.
Now, metals have a molecular structure that makes them good conductors because electrons in the atoms of these conductors tend to move freely from one atom to the other. So a majority of metals make good conductors because these metals tend to hold their electrons loosely. In short, it can help engineers make powerful batteries because then it means that they are capable of giving much more electrical energy since nowadays, advanced batteries make use of ion charges for the batteries.
1. express the following in proper SI form using the appropriate prefixes. a. 52500000 m b. 1000 g c. 2435200000
Answer:
a
[tex]L = 5.25*10^{7} \ m[/tex]
b
[tex]m = 1 \ kg[/tex]
c
[tex]t = 1.46112000000 *10^{11} \ s[/tex]
Explanation:
From the question we are told that
Length is L = 52500000 m
Mass is
Time is 2435200000 minutes
Generally the proper SI for length is meters ,
Now converting the given length to proper SI form using the appropriate prefixes we have that
[tex]L = 5.25*10^{7} \ m[/tex]
Generally the proper SI for mass is kilograms
converting grams to kilograms , we have
[tex]m =\frac{1000}{1000 }[/tex]
=> [tex]m = 1 \ kg[/tex]
Generally the proper SI for time is seconds
converting minutes to seconds , we have
[tex]t = 24352000000* 60[/tex]
=> [tex]t = 146112000000 \ s[/tex]
Now converting to the proper SI form using the appropriate prefixes
[tex]t = 1.46112000000 *10^{11} \ s[/tex]
a steel girder weighting 700 lb is hoisted from gund level to the roof of a 70-ft building using a chain that weighs 4lb/running foot. Find the work done
Answer:
66.475kJ
Explanation:
Work done is the product of the force and perpendicular distance in direction of the force.
Work done = Force × distance
Given
Weight = 700lb
Distance = 70ft
1lb force = 4.448N
700lb force = 700(4.448) = 3113.6N
Distance = 70(0.305) = 21.35m
Work done = 3113.6×21.35
Work done ≈ 66,475Joules
Work done = 66.475kJ
You're driving a bumper car at a circus at
18 m/sec, and you hit another car that's at
rest. If you end up going at 6.0 m/sec, what
is the final speed of the other car, given
that both cars have 100.0 kg mass, you
have 80.0 kg mass, and the other person
has a mass of 70.0 kg?
Answer:
PLEASE MARK AS BRAINLIEST!!
Explanation:
ANSWER IS IN THE IMG BELOW
12 seconds after starting from rest a frewly falling cantaloupe has a speed of
Answer:
The cantaloupe has a speed of 117.6 m/s
Explanation:
Free Fall Motion
It occurs when an object falls under the sole influence of gravity. Any object that is being acted upon solely by the force of gravity is said to be in a state of free fall. Free-falling objects do not face air resistance.
If an object is dropped from rest in a free-falling motion, it falls with a constant acceleration called the acceleration of gravity, which value is [tex]g = 9.8 m/s^2[/tex].
The final velocity of a free-falling object after a time t is given by:
vf=g.t
The cantaloupe has been dropped from rest. We are required to find the speed after t=12 seconds.
Calculate the final speed:
vf=9.8 * 12 = 117.6 m/s
The cantaloupe has a speed of 117.6 m/s
How fast, in meters per second, does an observer need to approach a stationary sound source in order to observe a 7.1 % increase in the emitted frequency?
Answer:
v0 = 24.42 m/s (Approx)
Explanation:
Given:
Increase in frequency = 7.1% =
Computation:
Assume n = 100%
n1 = [(v+v0)/(v+v1)]n
[100 + 7.1] = [(344+v0)/(344+0)]100
107.1 = [(344+v0)/(344)]100
v0 = 24.42 m/s (Approx)
Which lists three organic biological molecules?
O carbohydrates, salts, metals
O salts, proteins, minerals,
O proteins, lipids, carbohydrates
O lipids, metals, minerals
Answer:
B
Explanation:
I'm learning it in science.
Answer:
its not b i just took the test and b was wrong
Explanation:
What kind of electricity does turning wheel generates? Please help!
Answer: Kinetic Energy to Electrical.
Explanation: The magnet is rotated as a result of the spinning wheels, and this results in a powerful stream of electrons, therefore converting kinetic to electrical.
A circular wire loop lies inside a region of space containing a magnetic field. The direction of the magnetic field is out of the screen and parallel to the central axis of the loop. The magnitude of the magnetic field increases as a function of time. A circular loop oriented parallel to the plane of the screen lies inside a region containing magnetic field B. The field is directed out of the screen and is increasing. What is the direction of the induced current in the loop
Answer:
clockwise
Explanation:
According to the law given by Lenz, known as the Lenz law, it is said that a current induced in the circuit which is due to the change in the magnetic field and is so directed so as to oppose the change in the flux and to apply a force in the opposite direction if the force.
Here, as the magnetic field is directed out of the screen, the current flows in the direction which is clockwise in the loop and it opposes the increasing magnetic field.
The clockwise induced current will produce magnetic field in to the screen.
According to The Flash, The heroes top speed is Mach 3.3, or 2,500 miles per hour. How
long would it take for him to run around the planet? (circumference of the earth is
roughly 25,000 miles) *
Answer:
nearly 2 days or less hes fast but not that fast
Explanation:
but maybe he can run it in five minutes
A thyristor (SCR) is a
Answer:
A thyristor (/θaɪˈrɪstər/) is a solid-state semiconductor device with four layers of alternating P- and N-type materials. It acts exclusively as a bistable switch, conducting when the gate receives a current trigger, and continuing to conduct until the voltage across the device is reversed biased, or until the voltage is removed (by some other means).
Explanation:
Correct me if im wrong
a 2 kg block is attached to a horizontal ideal spring with a spring constant 200N/m. when the
identical spheres are dropped from a height of 100 m above the surfaces of Planet X and Planet Y. The speed of the spheres as a function of time is recorded for each planet in the graph
above. Which planet exerts the greater force of gravity on the sphere, and what evidence supports this conclusion?
A Planet X because its line has the greater area under it.
Planet X, because its line has the greater slope
Planet Y. because it falls for the smaller amount of time
Planet Y because the object's final speed is greater
Answer:
B. Planet X, because its line has the greater slope.
Explanation:
In a speed graph, acceleration is slope. A greater slope means a greater acceleration. According to Newton's 2nd law (F=mg), a greater acceleration means a greater force.
Planet X exerts the greater force of gravity on the sphere, because its line has the greater slope. Hence option B is correct.
What is Gravitational Force ?Gravitational force is force of attraction between two masses. Gravitational force(F) between two bodies is directly proportion to the product of masses(m₁,m₂) of two bodies and inversely proportional to square of distance(r) between them. mathematically it is written as,
F ∝ m₁.m₂
F ∝ 1/r²
F = G m₁,m₂÷r²
where G is gravitational constant, whose value is 6.6743 × 10⁻¹¹ m³ kg-1s⁻².
Force is expressed in Newton N in SI unit. its dimensions are [M¹L¹T⁻²].
This is analogous with coulomb's law which gives force between two charges.
if a planet has greater gravitational force(force of gravity), then body falls with greater speed as compare to other planet which is having less force of gravity. we can see in case of planet X there is greater speed as compare to plane Y in short time. Hence option B is correct.
To know more about Gravity :
https://brainly.com/question/31321801
#SPJ2.
hita's Question Bank- CTEVT
Baishakh] Q.No. 12 What is radiocarbon dating?
VER QUESTIONS
"Radiocarbon dating is a method for determining the age of an object containing organic material by using the properties of radiocarbon."
Answer:
well for me I think
Explanation:
The use of carbon 12 to tell the age of substances