Answer:
d = 57.87 m
Explanation:
It is given that,
Acceleration of car due to applied brake is [tex]-5.4\ m/s^2[/tex]
Its initial speed was 25 m/s
Its final speed was 0 as its comes to rest.
Leat d is the distance covered by the car. It can be calculated using third equation of kinematics as :
[tex]v^2-u^2=2ad\\\\d=\dfrac{v^2-u^2}{2a}\\\\d=\dfrac{0^2-(25)^2}{2\times (-5.4)}\\\\d=57.87\ m[/tex]
So, the distance covered by the car is 57.87 m.
Answer:
d = 57.87 m
Explanation: have a nice day :)
which glass is used in astrology?
Answer:
The answer is either looking glass or stained glass.
Explanation:
The popular glass used in astrology is stained glass which is popular in symbolization of huge astrology figures. As for looking glass, it's more popular in astrological souvenirs or objects.
Answer:
i think answer is pisces horoscope
What is electronic configuration?
Answer:
Electronic Configuration is the distribution of electrons in sub shells (s,p,d,f).
For Example,
The electronic configuration of Carbon (6 electrons) is [tex]1s^22s^22p^2[/tex]
0.0000302 in scientific notation
Answer:
3.02x10^-5
Explanation:
A scientific notation consists of
c x 10^n
the c must be a number between 1-9, while n must be an integer.
it indicates the c being multiplied by the nth power of 10.
From 0.0000302, we need to move the decimal to after 3 so that 3.02 can be a number between 1-9. When moving the decimal point to the right side, each digit moved counts as -1 power of 10.
So, to give 3.02, we need to move the decimal by 5 digits. hence, we can conclude n = -5.
0.0000302 = 3.02x10^-5
differences between concave and convex meniscus
Explanation:
A concave meniscus,(normally seen) occurs when the molecules of the liquid are attracted to those of the container. This occurs with water and a glass tube. A convex meniscus occurs when the molecules have a stronger attraction to each other than to the container, as with mercury and glass.
Answer:
there are differences between concave and convex menuscus
Explanation:
A concave meniscus, which is what you normally will see, occurs when the molecules of the liquid are attracted to those of the container. This occurs with water and a glass tube. A convex meniscus occurs when the molecules have a stronger attraction to each other than to the container, as with mercury and glass.
a force of 50 n acts on abody of mass 5 kg .calculate the acceleration produced
Answer:
a = 10 m/s²
Explanation:
Given:
Force = F = 50 N
Mass = m = 5 kg
Required:
Acceleration = a = ?
Formula:
F = ma
Solution:
Rearranging the formula for a
=> a = F/m
=> a = 50/5
=> a = 10 m/s²
Why is it advisable not to look directly at the Sun? Please Give scientific reason for your answer
Answer:
your eyes would get seriously damaged
Explanation:
when you look directly at the sun, the sun shines it's rays directly to your eyes , which damage them. that's why you should always wear sunglasses in that type of weather, and never point directly at the sun. if you find this answer helpful, mark it as brainliest.
A water pipe tapers down from an initial radius of R1 = 0.2 m to a final radius of R2 = 0.09 m. The water flows at a velocity v1 = 0.87 m/s in the larger section of pipe. What is the volume flow rate of the water?
Answer:
0.109 m/s
Explanation:
The calculation of the volume flow rate of the water is shown below:-
Av = Velocity ([tex]\pi[/tex])(Radius)^2
= 0.87([tex]\pi[/tex])(0.2)^2
= 0.135258 m^3 / sec
= 0.109371429 m/s
or
= 0.109
So, for calculating the volume flow rate of the water we simply applied the above formula i.e by multiplying the velocity with pi and squaring of radius so that the volume could come
A 22.8 kg rocking chair begins to slide across the carpet when the push reaches 57.0 N. What is the coefficient of static friction?
Answer:
0.255
Explanation:
The following data were obtained from the question:
Force (F) = 57 N
Mass (m) = 22.8 Kg
Coefficient of static friction (µ) =...?
Next, we shall determine the normal reaction (R). This is illustrated below:
Mass (m) = 22.8 Kg
Acceleration due to gravity (g) = 9.8 m/s²
Normal reaction (R) =?
R = mg
R = 22.8 x 9.8
R = 223.44 N
Finally, we can obtain the coefficient of static friction (µ) as follow:
Force (F) = 57 N
Normal reaction (R) = 223.44 N
Coefficient of static friction (µ) =...?
F = µR
57 = µ x 223.44
Divide both side by 223.44
µ = 57/223.44
µ = 0.255
Therefore, the coefficient of static friction (µ) is 0.255.
Answer:
.255
Explanation:
I'm also on acellus and it's the right answer
What is the formula for calculating the efficiency of a heat engine? Answers:
A 150 g egg is dropped from 3.0 meters. The egg is moving at 4.4 m/s right before it hits the ground. The egg comes to a stop in 0.072 seconds.
What is the magnitude of force that the ground exerted on the egg?
0.66 N
9.2 N
13 N
180 N
Answer is 9.2 N
Answer: Magnitude of the force exerted on the egg by the ground is 9.2N
Explanation:
Given the following :
Mass of egg (m) = 150g = 0.15kg
Height(h) from which egg is dropped = 3m
velocity of egg before hitting the ground (u) = 4.4m/s
Final velocity of egg (V) = 0
Time taken (t) = 0.072s
Magnitude of the force exerted on the egg by the ground can be found by applying Newton's 2nd law:
Momentum = mass × velocity
From Newton's second law:
Force = mass × change in Velocity with time ;
That is
F = m * ΔV / t
Inputting our values
F = 0.15 * (4.4 - 0) / 0.072
F = 0.15 × (4.4 / 0.072)
F = 0.15 × 61.11
F = 9.16N
F = 9.2N
Answer:
9.2 N
Explanation:
Just took practice quiz
a disc starts from rest with an angular acceleration completes 10 revolutions in 2 seconds. the time taken by it to complete 10 more revolution from that instant is
Starting from rest, the disc completes [tex]\theta[/tex] revolutions after [tex]t[/tex] seconds according to
[tex]\theta=\dfrac\alpha2t^2[/tex]
with angular acceleration [tex]\alpha[/tex]. It completes 10 rev in 2 s, which means
[tex]10\,\mathrm{rev}=\dfrac\alpha2(2\,\mathrm s)^2\implies\alpha=5\dfrac{\rm rev}{\mathrm s^2}[/tex]
Find the time it takes to complete 20 rev with this acceleration:
[tex]20\,\mathrm{rev}=\dfrac12\left(5\dfrac{\rm rev}{\mathrm s^2}\right)t^2\implies t=\sqrt8\,\mathrm s\approx2.83\,\mathrm s[/tex]
so it takes approximately 0.83 s to complete 10 more rev.
Un automovil circula a 126km/h por una autopista. Su conductor observa que a 150 m delante de el, se encuentra un árbol caído que ocupa toda la calzada. Inmediatamente presiona los frenos con una aceleración de -3,5 m/s². Determinar si logra evitar el choque.
Answer:
El conductor no puede evitar el choque.
Explanation:
Primero, convierta la velocidad del conductor a m / s:
1 km/h = 0.277778 m/s
126 km/h = 126 * 0.277778 = 35 m/s
La velocidad del automóvil es de 35 m / s.
El conductor presiona los frenos con una aceleración de -3.5 m / s² para evitar un choque a 150 m por delante.
Veamos qué distancia se moverá el automóvil después de que comience a desacelerar.
Utilizaremos una de las ecuaciones de movimiento lineal de Newton:
[tex]v^2 = u^2 + 2as[/tex]
donde v = velocidad final = 0 m / s (el automóvil debe detenerse)
u = velocidad inicial = 35 m / s
a = aceleración = -3.5 m / s².
s = distancia recorrida
Por lo tanto:
[tex]0 = 35^2 + (2 * -3.5 * s)\\\\=> 1225 = 7.0s\\\\s = 1225 / 7 = 175 m[/tex]
Esto significa que el automóvil se detendrá a 175 m.
Por lo tanto, a esa velocidad y aceleración, el conductor chocará contra el árbol caído porque el automóvil no podrá detenerse antes de alcanzar la posición del árbol.
A body is acted upon by a force of 4N.
As a result, the velocity of the body has
changed from 0.3 m/s to 0.1 m/s passing
through a certain distance. If the mass
of the body is 1 kg, find the distance travelled.
[tex]\mathfrak{\huge{\pink{\underline{\underline{AnSwEr:-}}}}}[/tex]
Actually Welcome to the Concept of the Kinematics.
so here we get as,
V^2 = U^2 + 2as
so here, a = -0.2 m/s^2
(0.1)^2 = (0.3)^2 + (-0.2)(s)
=> 0.01 = 0.09 - 0.2s
=> 0.2s = 0.08
=> s = 0.08/0.2
=> s = 0.4 m
1-D Kinematics
A car starts at a position of -153 m
and undergoes a displacement of
512 m. What is its final position?
(Unit = m)
Answer:
hope it helps you...........
how does an electric iron work when the power is on
Answer:
The basic principle on which the electric iron works is that when a current is passed through a piece of wire, the wire heats up. This heat is distributed to the sole (base) plate of the electric iron through conduction.
Convert Gravitational constant (G) = 6.67×10^-11 Nm²kg^-2 to cm³ g ^-1 s^-2.
Answer:
6.67×10⁻⁸ cm³/g/s²
Explanation:
6.67×10⁻¹¹ Nm²/kg²
= 6.67×10⁻¹¹ (kg m/s²) m²/kg²
= 6.67×10⁻¹¹ m³/kg/s²
= 6.67×10⁻¹¹ m³/kg/s² × (100 cm/m)³ × (1 kg / 1000 g)
= 6.67×10⁻⁸ cm³/g/s²
Dominic made the table below to organize his notes about mixtures.
Properties of Mixtures
has no set composition
must have more than one state of matter
must have more than one substance
What mistake did Dominic make?
The title should read "Properties of Solutions" because some mixtures do not have all of the properties listed.
There is a definite recipe to make each mixture, so the composition of a mixture is set.
Although it is possible to have more than one state, it is also possible to have only one state.
A single substance can be used to make a mixture if the substance is composed of more than one element.
Answer:
Althought it us possible to have more then one state, it's also possible to have only one state of matter
Explanation:
You can make solutions of only one state if matter, for example , it two liquids can be mixed to form a solution they are called miscible.
Answer:
The correct answer is C.) Although it is possible to have more than one state, it is also possible to have only one state.
Explanation:
I just did the test on edge and got it right
A toboggan with two riders has a total mass of 87.0 kg. A third person is pushing the toboggan with a force of 42.5 N at the top of a hill with an angle of 16°. The force of friction on the toboggan is 36.0 N. Which statement describes an accurate free-body diagram to represent the situation? (Choose one of the forces acting on the system with correct magnitude and direction.)
Options:
a) An arrow of magnitude 852.6 N points perpendicular to the slope of the hill.
b) An arrow of magnitude 6.50 N points down the slope of the hill.
c) An arrow of magnitude 78.5 N points down the slope of the hill.
d) An arrow of magnitude 852.6 N points straight down.
Answer:
d) An arrow of magnitude 852.6 N points straight down.
Explanation:
The total mass of the two riders, m = 87.0 kg
The free body diagrams of the situation described are drawn and contained in the files attached to this solution.
Note that the weight of the toboggan will act directly downwards.
Therefore, the weight of the toboggan, W = mg
W = 87 * 9.8
W = 852.6 N
Since the arrow representing the weight of the toboggan points straight down, the correct answer is that an arrow of magnitude 852.6 N points straight down.
A gas is held at atmospheric pressure, approximately 100kPa, and room temperature, 298K,
in a container closed with a piston. The piston is initially in a fixed position so the container has a volume of 2.0dm3.
The gas is heated to a temperature of 100∘C
What is the pressure in the container?
Answer:
125 KPa
Explanation:
Data obtained from the question include:
Initial pressure (P1) = 100 KPa
Initial temperature (T1) = 298 K
Final temperature (T2) = 100°C = 100°C + 273 = 373 K
Final pressure (P2) =..?
Since the volume of the container is fixed, the final pressure in the container can be obtained as follow:
P1/T1 = P2/T2
100/298 = P2/373
Cross multiply
298 x P2 = 100 x 373
Divide both side by 298
P2 = (100 x 373) / 298
P2 = 125.2 ≈ 125 KPa
Therefore, the final pressure in the container is approximately 125 KPa.
A force of 6 N is used to open a door, wherein the distance of the force to the axis of rotation is 80 cm. If the angular acceleration it acquires is 0.5 rad/s 2, determine the moment of inertia of the door.
Explanation:
∑τ = Iα
(6 N) (0.80 m) = I (0.5 rad/s²)
I = 9.6 kg m²
what are laws of newton
Answer:
In the first law, an object will not change its motion unless a force acts on it. In the second law, the force on an object is equal to its mass times its acceleration. In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction
Explanation:
Answer:
Newton's Law of Motion
1- Every object persists in its state of rest or uniform motion - in a straight line unless it is compelled to change that state by forces impressed on it.
2- Force is equal to the change in momentum per change in time. For a constant mass, force equals mass times acceleration.
3- For every action, there is an equal and opposite reaction.
If I were to fill a water bottle full of air and go up in elevation, would the water bottle expand or shrink? If I were to fill a water bottle full of air and go down in elevation, would the water bottle expand or shrink? I am at elevation 20000 I think.
Answer:
a. It would shrink
b. It would expand
Explanation:
a. Since the water bottle is filled with air at atmospheric pressure at 20000 ft, and since atmospheric pressure decreases with altitude, when we go up in elevation.
The pressure exerted by the molecules of air in the water bottle seek to balance out the atmospheric pressure as we go higher. Since the atmospheric pressure exerted by the molecules of air in the atmosphere are greater than that exerted by the molecules of air in the water bottle, this causes the volume of the water bottle to decrease and thus shrinks the water bottle until the pressure balances out
b. Since the water bottle is filled with air at atmospheric pressure at 20000 ft, and since atmospheric pressure increases with decreasing altitude, when we go down in elevation.
The pressure exerted by the molecules of air in the water bottle seek to balance out the atmospheric pressure as we go lower. The water bottle expands until the atmospheric pressure outside equals the pressure inside the water bottle.this causes the volume of the water bottle to increase and thus expands the water bottle until the pressure balances out
A 500 kg satellite experiences a gravitational force of 3000 N, while moving in a circular orbit around the earth. Determine the speed of the satellite.
Answer:
Speed of the satellite V = 6.991 × 10³ m/s
Explanation:
Given:
Force F = 3,000N
Mass of satellite m = 500 kg
Mass of earth M = 5.97 × 10²⁴
Gravitational force G = 6.67 × 10⁻¹¹
Find:
Speed of the satellite.
Computation:
Radius r = √[GMm / F]
Radius r = √[(6.67 × 10⁻¹¹ )(5.97 × 10²⁴)(500) / (3,000)
Radius r = 8.146 × 10⁶ m
Speed of the satellite V = √rF / m
Speed of the satellite V = √(8.146 × 10⁶)(3,000) / 500
Speed of the satellite V = 6.991 × 10³ m/s
An apple falls out of a tree from a height of 2.3 m What is the impact speed of the apple?
Answer:
6.72 m/s
Explanation:
recall that the equations of motion may be expressed as
v² = u² + 2as
where,
v = final velocity,
u = initial velocity = 0 m/s because it is stationary before it starts falling
a = acceleration (in this case because it is falling, it is the acceleration due to gravity = 9.81 m/s²)
s = distance traveled = 2.3m
in our case, if we neglect air resistance, then we simply substitute the known values above into the equation of motion.
v² = u² + 2as
v² = 0² + 2(9.81)(2.3)
v² = 45.126
v = √45.126
v = 6.72 m/s
How do you calculate the speed of a 3.1eV photon and a 3.1eV electron?
Explanation:
We need to find the speed of a 3.1eV proton and a 3.1eV electron.
For proton, using conservation of energy such that,
[tex]\dfrac{1}{2}m_pv_p^2=eV\\\\v_p^2=\dfrac{2eV}{m_p}\\\\v_p=\sqrt{\dfrac{2eV}{m_p}}[/tex]
[tex]m_p[/tex] is mass of proton
[tex]v_p=\sqrt{\dfrac{2\times 3.1\times 1.6\times 10^{-19}\ J}{1.67\times 10^{-27}\ kg}}\\\\v_p=2.43\times 10^5\ m/s[/tex]
For electron,
[tex]\dfrac{1}{2}m_ev_e^2=eV\\\\v_e^2=\dfrac{2eV}{m_e}\\\\v_e=\sqrt{\dfrac{2eV}{m_e}}[/tex]
[tex]m_e[/tex] is mass of proton
[tex]v_e=\sqrt{\dfrac{2\times 3.1\times 1.6\times 10^{-19}\ J}{9.1\times 10^{-31}\ kg}}\\\\v_e=1.44\times 10^6\ m/s[/tex]
Hence, this is the required solution.
A drop
of
oil volume 10 m
Spreads out on water to make a
Circular fils of diameter 10
What is that thickness?
Answer:
[tex]27.5\ m[/tex]
Explanation:
As we know that volume of cylinder is
[tex]v=\pi r^{2} *h[/tex]
Where v=volume , h= height or thickness and r= radius
Here,
[tex]v= 10 m ,\ diameter= 10, \ r=\frac{diameter}{2} \ r=\frac{10}{2}\\ r=5[/tex]
Putting these values in the previous equation , we get
[tex]10\ = \frac{22}{7} *5 *5*h\\ 14\ =\ 110*h\\h=\frac{110}{14} \\h=\frac{55}{2} \\\\h=27.5\ m[/tex]
Therefore thickness is 27.5 m
how does gravitational pull affect planets with the same mass but different distance from the sun?
Answer:
it just pulls them at the same time
Explanation:
help fast I want the correct answer please does spectral diffusion cause light to scatter
Answer: No
Explanation:
Whenever light travelling on a straight line encounters obstruction, it diffracts and scatter.
Scattering of light occurs when light passes through a rough path or a diffused surface.
But in case of spectral diffusion, which is the fluctuation in spectroscopy as a result of time dependent frequency shifts.
Spectral diffusion occurs in particular molecules initiated by excessive excitation energy.
Fluctuation in frequency does not mean diffraction of light or particles
Therefore, spectral diffusion does not cause light to scatter.
A cars start from rest . after 10 seconds its acceleration become 2 meter per second find its final velocity
Answer:
[tex] \boxed{\sf Final \ velocity = 20 \ m/s} [/tex]
Given:
Initial velocity (u) = 0 m/s
Acceleration (a) = 2 m/s²
Time taken (t) = 10 seconds
To Find:
Final velocity (v)
Explanation:
[tex]\sf From \ equation \ of \ motion: \\ \sf v = u + at \\ \\ \sf v = 0 + 2(10) \\ \\ \sf v = 2 \times 10 \\ \\ \sf v = 20 \ m/s[/tex]
A 28-turn circular coil of radius 4.40 cm and resistance 1.00 Ω is placed in a magnetic field directed perpendicular to the plane of the coil. The magnitude of the magnetic field varies in time according to the expression B = 0.010 0t + 0.040 0t2, where B is in teslas and t is in seconds. Calculate the induced emf in the coil at t = 4.20 s.
Answer:
ε = -0.0589V = -58.9mV
Explanation:
In order to calculate the induced emf in the coil, you use the following formula:
[tex]\epsilon=-N\frac{d\Phi_B}{dt}=-N\frac{d(SBcos\alpha)}{dt}[/tex] (1)
ε: induced emf = ?
N: turns of the coil = 28
ФB: magnetic flux trough the coil
S: cross sectional area of the circular coil = π.r^2
r: radius of the cross sectional area of the coil = 4.40cm = 0.044m
B: magnetic field
α: angle between the direction of the magnetic field and the direction of the normal to the cross area of the coil = 0°
You take into account that the area is constant respect to the magnetic field that cross it. Only the magnetic field is changing with time. The magnetic field depends on time as follow:
[tex]B(t)=0.010t+0.040t^2[/tex] (2)
You replace the expression (2) into the equation (1), evaluate the derivative, and replace the values of the other parameters for t =4.20s:
[tex]\epsilon=-NS\frac{dB}{dt}=-NS\frac{d}{dt}[0.010t+0.040t^2]\\\\\epsilon(t)=-NS(0.010+0.080t)\\\\\epsilon(t)=-(28)(\pi(0.044m)^2)(0.010T/s+0.080T/s^2(4.20s))\\\\\epsilon(t)=-0.0589V=-58.9mV[/tex]
The induced emf in the coil is -58.9mV